🚨 CVE-2026-25673
An issue was discovered in 6.0 before 6.0.3, 5.2 before 5.2.12, and 4.2 before 4.2.29.
`URLField.to_python()` in Django calls `urllib.parse.urlsplit()`, which performs NFKC normalization on Windows that is disproportionately slow for certain Unicode characters, allowing a remote attacker to cause denial of service via large URL inputs containing these characters.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Seokchan Yoon for reporting this issue.

🎖@cveNotify

🚨 CVE-2026-27622
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In CompositeDeepScanLine::readPixels, per-pixel totals are accumulated in vector<unsigned int> total_sizes for attacker-controlled large counts across many parts, total_sizes[ptr] wraps modulo 2^32. overall_sample_count is then derived from wrapped totals and used in samples[channel].resize(overall_sample_count). Decode pointer setup/consumption proceeds with true sample counts, and write operations in core unpack (generic_unpack_deep_pointers) overrun the undersized composite sample buffer. This vulnerability is fixed in v3.2.6, v3.3.8, and v3.4.6.

🎖@cveNotify

🚨 CVE-2026-27446
Missing Authentication for Critical Function (CWE-306) vulnerability in Apache Artemis, Apache ActiveMQ Artemis. An unauthenticated remote attacker can use the Core protocol to force a target broker to establish an outbound Core federation connection to an attacker-controlled rogue broker. This could potentially result in message injection into any queue and/or message exfiltration from any queue via the rogue broker. This impacts environments that allow both:

- incoming Core protocol connections from untrusted sources to the broker

- outgoing Core protocol connections from the broker to untrusted targets

This issue affects:

- Apache Artemis from 2.50.0 through 2.51.0

- Apache ActiveMQ Artemis from 2.11.0 through 2.44.0.

Users are recommended to upgrade to Apache Artemis version 2.52.0, which fixes the issue.

The issue can be mitigated by one of the following:

- Remove Core protocol support from any acceptor receiving connections from untrusted sources. Incoming Core protocol connections are supported by default via the "artemis" acceptor listening on port 61616. See the "protocols" URL parameter configured for the acceptor. An acceptor URL without this parameter supports all protocols by default, including Core.

- Use two-way SSL (i.e. certificate-based authentication) in order to force every client to present the proper SSL certificate when establishing a connection before any message protocol handshake is attempted. This will prevent unauthenticated exploitation of this vulnerability.

- Implement and deploy a Core interceptor to deny all Core downstream federation connect packets. Such packets have a type of (int) -16 or (byte) 0xfffffff0. Documentation for interceptors is available at  https://artemis.apache.org/components/artemis/documentation/latest/intercepting-operations.html .

🎖@cveNotify

🚨 CVE-2025-15558
Docker CLI for Windows searches for plugin binaries in C:\ProgramData\Docker\cli-plugins, a directory that does not exist by default. A low-privileged attacker can create this directory and place malicious CLI plugin binaries (docker-compose.exe, docker-buildx.exe, etc.) that are executed when a victim user opens Docker Desktop or invokes Docker CLI plugin features, and allow privilege-escalation if the docker CLI is executed as a privileged user.

This issue affects Docker CLI: through 29.1.5 and Windows binaries acting as a CLI-plugin manager using the github.com/docker/cli/cli-plugins/manager https://pkg.go.dev/github.com/docker/cli@v29.1.5+incompatible/cli-plugins/manager  package, such as Docker Compose.

This issue does not impact non-Windows binaries, and projects not using the plugin-manager code.

🎖@cveNotify

🚨 CVE-2026-3520
Multer is a node.js middleware for handling `multipart/form-data`. A vulnerability in Multer prior to version 2.1.1 allows an attacker to trigger a Denial of Service (DoS) by sending malformed requests, potentially causing stack overflow. Users should upgrade to version 2.1.1 to receive a patch. No known workarounds are available.

🎖@cveNotify

🚨 CVE-2026-1605
In Eclipse Jetty, versions 12.0.0-12.0.31 and 12.1.0-12.0.5, class GzipHandler exposes a vulnerability when a compressed HTTP request, with Content-Encoding: gzip, is processed and the corresponding response is not compressed.


This happens because the JDK Inflater is allocated for decompressing the request, but it is not released because the release mechanism is tied to the compressed response.
In this case, since the response is not compressed, the release mechanism does not trigger, causing the leak.

🎖@cveNotify

🚨 CVE-2025-69534
Python-Markdown version 3.8 contain a vulnerability where malformed HTML-like sequences can cause html.parser.HTMLParser to raise an unhandled AssertionError during Markdown parsing. Because Python-Markdown does not catch this exception, any application that processes attacker-controlled Markdown may crash. This enables remote, unauthenticated Denial of Service in web applications, documentation systems, CI/CD pipelines, and any service that renders untrusted Markdown. The issue was acknowledged by the vendor and fixed in version 3.8.1. This issue causes a remote Denial of Service in any application parsing untrusted Markdown, and can lead to Information Disclosure through uncaught exceptions.

🎖@cveNotify

🚨 CVE-2026-25048
xgrammar is an open-source library for efficient, flexible, and portable structured generation. Prior to version 0.1.32, the multi-level nested syntax caused a segmentation fault (core dumped). This issue has been patched in version 0.1.32.

🎖@cveNotify

🚨 CVE-2025-45691
An Arbitrary File Read vulnerability exists in the ImageTextPromptValue class in Exploding Gradients RAGAS v0.2.3 to v0.2.14. The vulnerability stems from improper validation and sanitization of URLs supplied in the retrieved_contexts parameter when handling multimodal inputs.

🎖@cveNotify

🚨 CVE-2026-26999
Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.38 and 3.6.9, there is a potential vulnerability in Traefik managing TLS handshake on TCP routers. When Traefik processes a TLS connection on a TCP router, the read deadline used to bound protocol sniffing is cleared before the TLS handshake is completed. When a TLS handshake read error occurs, the code attempts a second handshake with different connection parameters, silently ignoring the initial error. A remote unauthenticated client can exploit this by sending an incomplete TLS record and stopping further data transmission, causing the TLS handshake to stall indefinitely and holding connections open. By opening many such stalled connections in parallel, an attacker can exhaust file descriptors and goroutines, degrading availability of all services on the affected entrypoint. This issue has been patched in versions 2.11.38 and 3.6.9.

🎖@cveNotify

🚨 CVE-2026-29054
Traefik is an HTTP reverse proxy and load balancer. From version 2.11.9 to 2.11.37 and from version 3.1.3 to 3.6.8, there is a potential vulnerability in Traefik managing the Connection header with X-Forwarded headers. When Traefik processes HTTP/1.1 requests, the protection put in place to prevent the removal of Traefik-managed X-Forwarded headers (such as X-Real-Ip, X-Forwarded-Host, X-Forwarded-Port, etc.) via the Connection header does not handle case sensitivity correctly. The Connection tokens are compared case-sensitively against the protected header names, but the actual header deletion operates case-insensitively. As a result, a remote unauthenticated client can use lowercase Connection tokens (e.g. Connection: x-real-ip) to bypass the protection and trigger the removal of Traefik-managed forwarded identity headers. This issue has been patched in versions 2.11.38 and 3.6.9.

🎖@cveNotify

🚨 CVE-2026-3009
A security flaw in the IdentityBrokerService.performLogin endpoint of Keycloak allows authentication to proceed using an Identity Provider (IdP) even after it has been disabled by an administrator. An attacker who knows the IdP alias can reuse a previously generated login request to bypass the administrative restriction. This undermines access control enforcement and may allow unauthorized authentication through a disabled external provider.

🎖@cveNotify

🚨 CVE-2026-3047
A flaw was found in org.keycloak.broker.saml. When a disabled Security Assertion Markup Language (SAML) client is configured as an Identity Provider (IdP)-initiated broker landing target, it can still complete the login process and establish a Single Sign-On (SSO) session. This allows a remote attacker to gain unauthorized access to other enabled clients without re-authentication, effectively bypassing security restrictions.

🎖@cveNotify

🚨 CVE-2026-28802
Authlib is a Python library which builds OAuth and OpenID Connect servers. From version 1.6.5 to before version 1.6.7, previous tests involving passing a malicious JWT containing alg: none and an empty signature was passing the signature verification step without any changes to the application code when a failure was expected.. This issue has been patched in version 1.6.7.

🎖@cveNotify

🚨 CVE-2026-29062
jackson-core contains core low-level incremental ("streaming") parser and generator abstractions used by Jackson Data Processor. From version 3.0.0 to before version 3.1.0, the UTF8DataInputJsonParser, which is used when parsing from a java.io.DataInput source, bypasses the maxNestingDepth constraint (default: 500) defined in StreamReadConstraints. A similar issue was found in ReaderBasedJsonParser. This allows a user to supply a JSON document with excessive nesting, which can cause a StackOverflowError when the structure is processed, leading to a Denial of Service (DoS). This issue has been patched in version 3.1.0.

🎖@cveNotify

🚨 CVE-2026-29074
SVGO, short for SVG Optimizer, is a Node.js library and command-line application for optimizing SVG files. From version 2.1.0 to before version 2.8.1, from version 3.0.0 to before version 3.3.3, and before version 4.0.1, SVGO accepts XML with custom entities, without guards against entity expansion or recursion. This can result in a small XML file (811 bytes) stalling the application and even crashing the Node.js process with JavaScript heap out of memory. This issue has been patched in versions 2.8.1, 3.3.3, and 4.0.1.

🎖@cveNotify

🚨 CVE-2026-26017
CoreDNS is a DNS server that chains plugins. Prior to version 1.14.2, a logical vulnerability in CoreDNS allows DNS access controls to be bypassed due to the default execution order of plugins. Security plugins such as acl are evaluated before the rewrite plugin, resulting in a Time-of-Check Time-of-Use (TOCTOU) flaw. This issue has been patched in version 1.14.2.

🎖@cveNotify

🚨 CVE-2026-26018
CoreDNS is a DNS server that chains plugins. Prior to version 1.14.2, a denial of service vulnerability exists in CoreDNS's loop detection plugin that allows an attacker to crash the DNS server by sending specially crafted DNS queries. The vulnerability stems from the use of a predictable pseudo-random number generator (PRNG) for generating a secret query name, combined with a fatal error handler that terminates the entire process. This issue has been patched in version 1.14.2.

🎖@cveNotify

🚨 CVE-2026-29091
Locutus brings stdlibs of other programming languages to JavaScript for educational purposes. Prior to version 3.0.0, a remote code execution (RCE) flaw was discovered in the locutus project, specifically within the call_user_func_array function implementation. The vulnerability allows an attacker to inject arbitrary JavaScript code into the application's runtime environment. This issue stems from an insecure implementation of the call_user_func_array function (and its wrapper call_user_func), which fails to properly validate all components of a callback array before passing them to eval(). This issue has been patched in version 3.0.0.

🎖@cveNotify

🚨 CVE-2026-29063
Immutable.js provides many Persistent Immutable data structures. Prior to versions 3.8.3, 4.3.7, and 5.1.5, Prototype Pollution is possible in immutable via the mergeDeep(), mergeDeepWith(), merge(), Map.toJS(), and Map.toObject() APIs. This issue has been patched in versions 3.8.3, 4.3.7, and 5.1.5.

🎖@cveNotify

🚨 CVE-2026-25679
url.Parse insufficiently validated the host/authority component and accepted some invalid URLs.

🎖@cveNotify