🚨 CVE-2025-32909
A flaw was found in libsoup. SoupContentSniffer may be vulnerable to a NULL pointer dereference in the sniff_mp4 function. The HTTP server may cause the libsoup client to crash.
🎖@cveNotify
A flaw was found in libsoup. SoupContentSniffer may be vulnerable to a NULL pointer dereference in the sniff_mp4 function. The HTTP server may cause the libsoup client to crash.
🎖@cveNotify
🚨 CVE-2025-32910
A flaw was found in libsoup, where soup_auth_digest_authenticate() is vulnerable to a NULL pointer dereference. This issue may cause the libsoup client to crash.
🎖@cveNotify
A flaw was found in libsoup, where soup_auth_digest_authenticate() is vulnerable to a NULL pointer dereference. This issue may cause the libsoup client to crash.
🎖@cveNotify
🚨 CVE-2025-32912
A flaw was found in libsoup, where SoupAuthDigest is vulnerable to a NULL pointer dereference. The HTTP server may cause the libsoup client to crash.
🎖@cveNotify
A flaw was found in libsoup, where SoupAuthDigest is vulnerable to a NULL pointer dereference. The HTTP server may cause the libsoup client to crash.
🎖@cveNotify
🚨 CVE-2025-32914
A flaw was found in libsoup, where the soup_multipart_new_from_message() function is vulnerable to an out-of-bounds read. This flaw allows a malicious HTTP client to induce the libsoup server to read out of bounds.
🎖@cveNotify
A flaw was found in libsoup, where the soup_multipart_new_from_message() function is vulnerable to an out-of-bounds read. This flaw allows a malicious HTTP client to induce the libsoup server to read out of bounds.
🎖@cveNotify
🚨 CVE-2025-3576
A vulnerability in the MIT Kerberos implementation allows GSSAPI-protected messages using RC4-HMAC-MD5 to be spoofed due to weaknesses in the MD5 checksum design. If RC4 is preferred over stronger encryption types, an attacker could exploit MD5 collisions to forge message integrity codes. This may lead to unauthorized message tampering.
🎖@cveNotify
A vulnerability in the MIT Kerberos implementation allows GSSAPI-protected messages using RC4-HMAC-MD5 to be spoofed due to weaknesses in the MD5 checksum design. If RC4 is preferred over stronger encryption types, an attacker could exploit MD5 collisions to forge message integrity codes. This may lead to unauthorized message tampering.
🎖@cveNotify
🚨 CVE-2025-48796
A flaw was found in GIMP. The GIMP ani_load_image() function is vulnerable to a stack-based overflow. If a user opens.ANI files, GIMP may be used to store more information than the capacity allows. This flaw allows a malicious ANI file to trigger arbitrary code execution.
🎖@cveNotify
A flaw was found in GIMP. The GIMP ani_load_image() function is vulnerable to a stack-based overflow. If a user opens.ANI files, GIMP may be used to store more information than the capacity allows. This flaw allows a malicious ANI file to trigger arbitrary code execution.
🎖@cveNotify
🚨 CVE-2025-48797
A flaw was found in GIMP when processing certain TGA image files. If a user opens one of these image files that has been specially crafted by an attacker, GIMP can be tricked into making serious memory errors, potentially leading to crashes and causing a heap buffer overflow.
🎖@cveNotify
A flaw was found in GIMP when processing certain TGA image files. If a user opens one of these image files that has been specially crafted by an attacker, GIMP can be tricked into making serious memory errors, potentially leading to crashes and causing a heap buffer overflow.
🎖@cveNotify
🚨 CVE-2025-48798
A flaw was found in GIMP when processing XCF image files. If a user opens one of these image files that has been specially crafted by an attacker, GIMP can be tricked into making serious memory errors, potentially leading to crashes and causing use-after-free issues.
🎖@cveNotify
A flaw was found in GIMP when processing XCF image files. If a user opens one of these image files that has been specially crafted by an attacker, GIMP can be tricked into making serious memory errors, potentially leading to crashes and causing use-after-free issues.
🎖@cveNotify
🚨 CVE-2025-49795
A NULL pointer dereference vulnerability was found in libxml2 when processing XPath XML expressions. This flaw allows an attacker to craft a malicious XML input to libxml2, leading to a denial of service.
🎖@cveNotify
A NULL pointer dereference vulnerability was found in libxml2 when processing XPath XML expressions. This flaw allows an attacker to craft a malicious XML input to libxml2, leading to a denial of service.
🎖@cveNotify
🚨 CVE-2025-49175
A flaw was found in the X Rendering extension's handling of animated cursors. If a client provides no cursors, the server assumes at least one is present, leading to an out-of-bounds read and potential crash.
🎖@cveNotify
A flaw was found in the X Rendering extension's handling of animated cursors. If a client provides no cursors, the server assumes at least one is present, leading to an out-of-bounds read and potential crash.
🎖@cveNotify
🚨 CVE-2025-49176
A flaw was found in the Big Requests extension. The request length is multiplied by 4 before checking against the maximum allowed size, potentially causing an integer overflow and bypassing the size check.
🎖@cveNotify
A flaw was found in the Big Requests extension. The request length is multiplied by 4 before checking against the maximum allowed size, potentially causing an integer overflow and bypassing the size check.
🎖@cveNotify
🚨 CVE-2025-32988
A flaw was found in GnuTLS. A double-free vulnerability exists in GnuTLS due to incorrect ownership handling in the export logic of Subject Alternative Name (SAN) entries containing an otherName. If the type-id OID is invalid or malformed, GnuTLS will call asn1_delete_structure() on an ASN.1 node it does not own, leading to a double-free condition when the parent function or caller later attempts to free the same structure.
This vulnerability can be triggered using only public GnuTLS APIs and may result in denial of service or memory corruption, depending on allocator behavior.
🎖@cveNotify
A flaw was found in GnuTLS. A double-free vulnerability exists in GnuTLS due to incorrect ownership handling in the export logic of Subject Alternative Name (SAN) entries containing an otherName. If the type-id OID is invalid or malformed, GnuTLS will call asn1_delete_structure() on an ASN.1 node it does not own, leading to a double-free condition when the parent function or caller later attempts to free the same structure.
This vulnerability can be triggered using only public GnuTLS APIs and may result in denial of service or memory corruption, depending on allocator behavior.
🎖@cveNotify
🚨 CVE-2025-32989
A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly.
🎖@cveNotify
A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly.
🎖@cveNotify
🚨 CVE-2025-32990
A heap-buffer-overflow (off-by-one) flaw was found in the GnuTLS software in the template parsing logic within the certtool utility. When it reads certain settings from a template file, it allows an attacker to cause an out-of-bounds (OOB) NULL pointer write, resulting in memory corruption and a denial-of-service (DoS) that could potentially crash the system.
🎖@cveNotify
A heap-buffer-overflow (off-by-one) flaw was found in the GnuTLS software in the template parsing logic within the certtool utility. When it reads certain settings from a template file, it allows an attacker to cause an out-of-bounds (OOB) NULL pointer write, resulting in memory corruption and a denial-of-service (DoS) that could potentially crash the system.
🎖@cveNotify
🚨 CVE-2025-59088
If kdcproxy receives a request for a realm which does not have server addresses defined in its configuration, by default, it will query SRV records in the DNS zone matching the requested realm name. This creates a server-side request forgery vulnerability, since an attacker could send a request for a realm matching a DNS zone where they created SRV records pointing to arbitrary ports and hostnames (which may resolve to loopback or internal IP addresses). This vulnerability can be exploited to probe internal network topology and firewall rules, perform port scanning, and exfiltrate data. Deployments where
the "use_dns" setting is explicitly set to false are not affected.
🎖@cveNotify
If kdcproxy receives a request for a realm which does not have server addresses defined in its configuration, by default, it will query SRV records in the DNS zone matching the requested realm name. This creates a server-side request forgery vulnerability, since an attacker could send a request for a realm matching a DNS zone where they created SRV records pointing to arbitrary ports and hostnames (which may resolve to loopback or internal IP addresses). This vulnerability can be exploited to probe internal network topology and firewall rules, perform port scanning, and exfiltrate data. Deployments where
the "use_dns" setting is explicitly set to false are not affected.
🎖@cveNotify
🚨 CVE-2026-12243
NLTK version 3.9.4 is vulnerable to a path traversal attack due to an incomplete fix for GitHub Issue #3504. The `_UNSAFE_NO_PROTOCOL_RE` regex in `nltk/data.py` checks for literal `../` sequences but fails to account for percent-encoded traversal sequences such as `..%2f`. The `url2pathname()` function decodes these sequences after the validation step, allowing an attacker to bypass the protection. This vulnerability enables an attacker to read arbitrary files accessible to the Python process by controlling the resource name parameter passed to `nltk.data.load()` or `nltk.data.find()`. The issue affects applications that rely on NLTK for resource loading, including NLP web applications, Jupyter notebooks, and CLI tools. The default `pathsec.ENFORCE=False` setting exacerbates the impact by not blocking the file read at the `open()` stage.
🎖@cveNotify
NLTK version 3.9.4 is vulnerable to a path traversal attack due to an incomplete fix for GitHub Issue #3504. The `_UNSAFE_NO_PROTOCOL_RE` regex in `nltk/data.py` checks for literal `../` sequences but fails to account for percent-encoded traversal sequences such as `..%2f`. The `url2pathname()` function decodes these sequences after the validation step, allowing an attacker to bypass the protection. This vulnerability enables an attacker to read arbitrary files accessible to the Python process by controlling the resource name parameter passed to `nltk.data.load()` or `nltk.data.find()`. The issue affects applications that rely on NLTK for resource loading, including NLP web applications, Jupyter notebooks, and CLI tools. The default `pathsec.ENFORCE=False` setting exacerbates the impact by not blocking the file read at the `open()` stage.
🎖@cveNotify
🚨 CVE-2024-21626
runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. In runc 1.1.11 and earlier, due to an internal file descriptor leak, an attacker could cause a newly-spawned container process (from runc exec) to have a working directory in the host filesystem namespace, allowing for a container escape by giving access to the host filesystem ("attack 2"). The same attack could be used by a malicious image to allow a container process to gain access to the host filesystem through runc run ("attack 1"). Variants of attacks 1 and 2 could be also be used to overwrite semi-arbitrary host binaries, allowing for complete container escapes ("attack 3a" and "attack 3b"). runc 1.1.12 includes patches for this issue.
🎖@cveNotify
runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. In runc 1.1.11 and earlier, due to an internal file descriptor leak, an attacker could cause a newly-spawned container process (from runc exec) to have a working directory in the host filesystem namespace, allowing for a container escape by giving access to the host filesystem ("attack 2"). The same attack could be used by a malicious image to allow a container process to gain access to the host filesystem through runc run ("attack 1"). Variants of attacks 1 and 2 could be also be used to overwrite semi-arbitrary host binaries, allowing for complete container escapes ("attack 3a" and "attack 3b"). runc 1.1.12 includes patches for this issue.
🎖@cveNotify
packetstorm.news
Packet Storm Security
Packet Storm Security provides security news, exploits, advisories, and tools for information security professionals.
🚨 CVE-2025-7345
A flaw exists in gdk‑pixbuf within the gdk_pixbuf__jpeg_image_load_increment function (io-jpeg.c) and in glib’s g_base64_encode_step (glib/gbase64.c). When processing maliciously crafted JPEG images, a heap buffer overflow can occur during Base64 encoding, allowing out-of-bounds reads from heap memory, potentially causing application crashes or arbitrary code execution.
🎖@cveNotify
A flaw exists in gdk‑pixbuf within the gdk_pixbuf__jpeg_image_load_increment function (io-jpeg.c) and in glib’s g_base64_encode_step (glib/gbase64.c). When processing maliciously crafted JPEG images, a heap buffer overflow can occur during Base64 encoding, allowing out-of-bounds reads from heap memory, potentially causing application crashes or arbitrary code execution.
🎖@cveNotify
🚨 CVE-2025-6395
A NULL pointer dereference flaw was found in the GnuTLS software in _gnutls_figure_common_ciphersuite().
🎖@cveNotify
A NULL pointer dereference flaw was found in the GnuTLS software in _gnutls_figure_common_ciphersuite().
🎖@cveNotify
🚨 CVE-2025-7519
A flaw was found in polkit. When processing an XML policy with 32 or more nested elements in depth, an out-of-bounds write can be triggered. This issue can lead to a crash or other unexpected behavior, and arbitrary code execution is not discarded. To exploit this flaw, a high-privilege account is needed as it's required to place the malicious policy file properly.
🎖@cveNotify
A flaw was found in polkit. When processing an XML policy with 32 or more nested elements in depth, an out-of-bounds write can be triggered. This issue can lead to a crash or other unexpected behavior, and arbitrary code execution is not discarded. To exploit this flaw, a high-privilege account is needed as it's required to place the malicious policy file properly.
🎖@cveNotify
🚨 CVE-2025-8114
A flaw was found in libssh, a library that implements the SSH protocol. When calculating the session ID during the key exchange (KEX) process, an allocation failure in cryptographic functions may lead to a NULL pointer dereference. This issue can cause the client or server to crash.
🎖@cveNotify
A flaw was found in libssh, a library that implements the SSH protocol. When calculating the session ID during the key exchange (KEX) process, an allocation failure in cryptographic functions may lead to a NULL pointer dereference. This issue can cause the client or server to crash.
🎖@cveNotify