🚨 CVE-2026-10593
The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream-qos pointer with only a stream != NULL guard. stream-qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep-qos struct, eliminating the NULL dereference.

🎖@cveNotify

🚨 CVE-2026-10644
The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte past the end of the caller-supplied buffer (CWE-787). The overflowed byte's value is the UART RX data supplied by the connected serial peer (adjacent attacker), while its size and location are fixed at one byte immediately after the buffer. Exploitation requires the async UART config (not enabled by default on the in-tree PIC32CM-JH boards) and a consumer that enables RX with a one-byte buffer; impact is limited single-byte memory corruption adjacent to the RX buffer (possible crash / denial of service). The defect shipped in v4.4.0. The fix reads the first byte with the CPU and, for one-byte buffers, performs no DMA at all; for larger buffers it sizes the DMA for the remaining len-1 bytes.

🎖@cveNotify

🚨 CVE-2026-10646
Zephyr's BSD-sockets getaddrinfo() implementation (subsys/net/lib/sockets/getaddrinfo.c) passes a pointer to a stack-allocated state object (struct getaddrinfo_state ai_state) as the user_data of an asynchronous DNS resolver query. The socket layer waits on a semaphore with a timeout deliberately set slightly longer than the resolver's own per-query timeout. When that semaphore wait nonetheless times out (-EAGAIN) - which can occur when the resolver's timeout work is delayed by workqueue contention, or in the documented multi-retry configuration where CONFIG_NET_SOCKETS_DNS_TIMEOUT exceeds CONFIG_NET_SOCKETS_DNS_BACKOFF_INTERVAL - the pre-fix code retries the query (goto again) without cancelling the previous one and without resetting the semaphore. The previous query slot remains active in the resolver with its callback and the stack pointer as user_data, and ai_state-dns_id is overwritten so the stale query can no longer be cancelled. A subsequent DNS response delivered over UDP and matched by its 16-bit transaction id (in dispatcher_cb()/dns_read()), or the resolver's own delayed query-timeout work, then invokes dns_resolve_cb() against the now out-of-scope stack frame, writing through the stale pointer (state-status, state-idx, state-ai_arr[], and k_sem_give()). Because the triggering response is network-delivered and its 16-bit id is spoofable/replayable by an on- or off-path attacker, this is a network-influenceable use-after-return that can corrupt reused stack memory, leading to crashes/denial of service or memory corruption. The fix cancels the timed-out query by name and type before retrying and resets the local semaphore, eliminating the stale callback path. Affected: Zephyr v4.0.0 through v4.4.0.

🎖@cveNotify

🚨 CVE-2026-10083
The APCu Manager WordPress plugin before 4.5.0 does not escape APCu object-cache keys before rendering them in an admin-area page, leading to a Stored Cross-Site Scripting vulnerability. When a persistent object cache is enabled, cache keys derived from unsanitised user input (e.g. a transient name created by another APCu Manager WordPress plugin before 4.5.0 from an unauthenticated request) are output without escaping and execute arbitrary JavaScript in the session of an administrator viewing the page.

🎖@cveNotify

🚨 CVE-2026-9676
The F4 Post Tree WordPress plugin before 2.0.5 does not perform capability checks or CSRF/nonce verification on one of its AJAX actions, allowing authenticated users with Subscriber-level access and above to modify the parent and menu order of arbitrary posts.

🎖@cveNotify

🚨 CVE-2026-22078
Because O+ Connect's IPC service does not authenticate clients, external applications can escalate privileges and perform sensitive actions through the IPC channel.

🎖@cveNotify

🚨 CVE-2026-9267
Eclipse tinydtls before commit b3efd41ad111a4920f599f51ffa4f5e9f1e72221 contains an out-of-bounds read vulnerability in the check_server_certificate() function that allows unauthenticated attackers to trigger reads beyond valid buffer boundaries by crafting a Certificate handshake message with a specific fragment_length value. Attackers can exploit missing buffer length validation before uint24 reads, memcmp, and memcpy operations during DTLS epoch 0 on both client and server paths to cause denial of service on memory-constrained devices.

🎖@cveNotify

🚨 CVE-2026-25707
A relative path traversal bug problem when processing repository metadata in libzypp before 17.38.10 could be used by remote attackers supplying repositories to overwrite files on the system, leading to denial of service or privilege escalation.

🎖@cveNotify

🚨 CVE-2026-41991
GNU gzip contains a vulnerability in the gzexe utility related to insecure temporary file handling. When the mktemp utility is not available in the user’s PATH, gzexe falls back to constructing a temporary file path based solely on the process ID (PID). This predictable filename is created without exclusive access or existence checks.
A local attacker can pre‑create the predicted temporary file path as a symbolic link pointing to an arbitrary file writable by the victim. When gzexe runs, it follows the symlink and overwrites the target file, resulting in a time‑of‑check to time‑of‑use (TOCTOU) condition that allows arbitrary file overwrite.

This issue has been fixed in the commit 4e6f8b24ab823146ab8776f0b7fe486ab34d4269

🎖@cveNotify

🚨 CVE-2026-41992
GNU gzip contains a global buffer overflow vulnerability in the LZH decompression logic caused by improper reuse of shared global state between different decompression formats within a single execution. GNU gzip maintains a global array that is shared across the LZ77, LZW, and LZH decompression routines and is not reinitialized between files processed in the same invocation.
By decompressing a specially crafted LZW file followed by a specially crafted LZH file in a single gzip -d command, an attacker can poison the shared global state and subsequently trigger an out‑of‑bounds read in the LZH decoder. The LZH decompression logic follows stale values left in the shared array, causing reads past the end of the allocated global buffer.

This issue has been fixed in the commit 63dbf6b3b9e6e781df1a6a64e609b10e23969681

🎖@cveNotify

🚨 CVE-2026-11979
libxml2 is vulnerable to multiple stack-based buffer overflows in the xmlcatalog utility when running in --shell mode. The usershell() function processes user input using fixed-size stack buffers without proper bounds checking.
By supplying an overly long input line, an attacker can overflow internal buffers (command, arg, and argv) during input parsing. This results in memory corruption within the stack frame.
Successful exploitation may cause a crash or potentially allow arbitrary code execution in the context of the xmlcatalog process.

This issue has been fixed in the commit c2e233fc.

NOTE:
The maintainers of this project did not agree that this issue is a vulnerability and considered it a bug.

🎖@cveNotify

🚨 CVE-2026-12616
The /v1/upload/sbom endpoint extracts the iss claim from the attacker-supplied JWT with signature verification disabled, then interpolates that string into three log statements before any validation gate. Because the configured log format ("%(asctime)s - %(name)s - %(levelname)s - %(message)s") renders newlines literally, an unauthenticated attacker can forge log records that are byte-for-byte indistinguishable from PIA's genuine "Successfully authenticated project" message. PIA is an authentication broker whose logs are explicitly relied upon for incident response (DESIGN.md §5.4 lists "Token verifications" and "Errors" as events to log), so the ability to plant fake auth-success entries directly undermines the audit trail the service exists to produce.

🎖@cveNotify

🚨 CVE-2026-13165
SzafirHost verifies the downloaded native library archive with one JarFile parser (reading the Central Directory) but extracts native libraries with JarInputStream parser (reading sequentially from local file headers). An attacker who controls the served archive can insert a malicious DLL/SO/DYLIB as a local-file-header entry between the last legitimate entry and the Central Directory, without adding it to the Central Directory. The signature verifier never sees the injected entry and accepts the archive as validly signed; the extractor reads it sequentially and writes the attacker library to the native temp directory with no hash check), while the archive-size check still passes. This can lead to remote code execution.

This issue was fixed in version 1.2.2.

🎖@cveNotify

🚨 CVE-2026-40521
FrontAccounting before 2.4.20 contains a path traversal vulnerability in the attachment upload handler that allows authenticated attackers to execute arbitrary code by uploading files with traversal sequences in the unique_name parameter. Attackers can supply path traversal sequences ../../../shell.php to write files outside the intended attachments directory into the web root, and by uploading PHP files without extension validation, achieve remote code execution as the web server user.

🎖@cveNotify

🚨 CVE-2026-40522
FrontAccounting before 2.4.20 contains a SQL injection vulnerability in the Bank Statement report handler that allows authenticated attackers to extract arbitrary database data by injecting UNION SELECT payloads into the PARAM_0 POST parameter. Attackers can supply malicious SQL syntax through the unparameterized WHERE clause to retrieve sensitive information including usernames, password hashes, and email addresses from the users table, rendered into PDF report output.

🎖@cveNotify

🚨 CVE-2026-40523
FrontAccounting before 2.4.20 contains a SQL injection vulnerability in the Audit Trail report handler that allows authenticated attackers with SA_GLANALYTIC permission to execute arbitrary SQL queries by injecting malicious code into the PARAM_2 and PARAM_3 POST parameters. Attackers can exploit time-based blind SQL injection through SLEEP() functions that are amplified across JOIN result sets to cause denial of service by exhausting database connections, or extract arbitrary database content through UNION-based injection techniques.

🎖@cveNotify

🚨 CVE-2026-40524
FrontAccounting before 2.4.20 contains a SQL injection vulnerability in the get_gl_transactions() function where the filter_type parameter is concatenated directly into a SQL IN() clause without parameterization. Attackers with SA_GLANALYTIC permission can inject arbitrary SQL by supplying a closing parenthesis followed by malicious conditions to extract sensitive journal entry data through boolean-based blind SQL injection with reliable response size differentials.

🎖@cveNotify

🚨 CVE-2026-55844
Home Assistant is open source home automation software that puts local control and privacy first. Prior to 2025.5.0, The iOS companion app ignores the SSID allowlist for internal networks. The app uses SSID to detect when to use the internal URL, but whenever the app cannot find any other URL to be used, it fallbacks to the internal URL as well, which can expose user's token when connected to a not secure network. This vulnerability is fixed in 2025.5.0.

🎖@cveNotify

🚨 CVE-2026-13437
Insertion of sensitive information into sent data in the AI Agent job API in Devolutions PowerShell Universal 2026.2.0 allows an authenticated user with AI Agent read access to obtain reusable, potentially higher-privileged authentication tokens via App Tokens serialized in plaintext in job API responses.

🎖@cveNotify

🚨 CVE-2026-13744
Improper neutralization of attacker-controlled content in Snowflake CLI versions prior to 3.19 allowed unintended SQL execution. By supplying crafted repository content, project configuration, manifest data, or specification input, an attacker could cause Snowflake CLI to execute unintended SQL in the context of the victim user's Snowflake session. Successful exploitation requires the victim to process attacker-controlled content through a vulnerable command path and is limited by the privileges assigned to that session. The fix is available in Snowflake CLI version 3.19. Users must manually upgrade.

🎖@cveNotify

🚨 CVE-2026-13746
Improper neutralization of local CLI parameters in Snowflake CLI versions prior to 3.19 allowed unintended SQL execution. A user could trigger this issue by supplying crafted values to vulnerable Cortex SQL or object listing command paths, causing Snowflake CLI to execute unintended SQL in the context of that user's Snowflake session. Successful exploitation is constrained to self-injection because the vulnerable parameters were supplied directly through local CLI arguments rather than through project files, repositories, or other external input sources, and impact is limited to the privileges already available to the current session. The fix is available in Snowflake CLI version 3.19, and users must manually upgrade.

🎖@cveNotify