🚨 CVE-2026-12993
A flaw was found in Apicurio Registry. The DocumentBuilderAccessor correctly blocks external DTD and schema access but does not disable DOCTYPE declarations or enable FEATURE_SECURE_PROCESSING. An attacker with artifact-write permission can upload XML documents with internal entity-expansion payloads (billion-laughs variant) that cause CPU and heap exhaustion, partially mitigated by the JAXP default 64,000 entity-expansion limit.

🎖@cveNotify

🚨 CVE-2026-46604
The TIFF decoder can panic when decoding an invalid image with an out-of-bounds strip offset.

🎖@cveNotify

🚨 CVE-2026-50765
A stored cross-site scripting (XSS) vulnerability in the patron restriction type administration page of Koha Library Management System 0 through 25.11 versions allow an authenticated remote attacker with administrator privileges to inject arbitrary web scripts via the restriction type label (display_text field).

🎖@cveNotify

🚨 CVE-2026-50766
A stored cross-site scripting (XSS) vulnerability in the OPAC item detail page of Koha Library Management System 0 through 25.11 versions allow an authenticated remote attacker with edit_items permission to inject arbitrary web scripts via the item public notes field (items.itemnotes).

🎖@cveNotify

🚨 CVE-2026-50767
A stored cross-site scripting (XSS) vulnerability in the item type administration page of Koha Library Management System 0 through 25.11 versions allow an authenticated remote attacker with administrator privileges to inject arbitrary web scripts via the item type check-in message field (checkinmsg).

🎖@cveNotify

🚨 CVE-2026-28701
Various versions of Daktronics Controller Firmware could allow authenticated and unauthenticated remote users to escape the intended directory and enumerate arbitrary file system paths.

🎖@cveNotify

🚨 CVE-2026-10820
The Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content WordPress plugin before 4.16.17 does not verify that the user performing a subscription action owns the targeted subscription, allowing any authenticated user (Subscriber+) to cancel other users' active subscriptions via an Insecure Direct Object Reference.

🎖@cveNotify

🚨 CVE-2026-12404
The NEX-Forms – Ultimate Forms Plugin for WordPress plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 9.2.2. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to enumerate sequential report IDs and download complete form submission data — including names, email addresses, phone numbers, postal addresses, payment details, and uploaded file paths — for any saved report on the site.

🎖@cveNotify

🚨 CVE-2026-10643
Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0.

🎖@cveNotify

🚨 CVE-2026-58049
FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.

🎖@cveNotify

🚨 CVE-2026-58050
libssh2 through 1.11.1 reads an attacker-controlled 32-bit attribute count from a publickey-subsystem response and uses it in the allocation num_attrs * sizeof(libssh2_publickey_attribute) without bounds checking, so on 32-bit platforms the multiplication overflows to an undersized buffer. A malicious SSH server can then drive the attribute-parsing loop to write past the allocation, causing a heap buffer overflow in a connecting libssh2 client.

🎖@cveNotify

🚨 CVE-2026-58051
libssh2 through 1.11.1 grows its publickey list with SSH2_REALLOC but does not zero-initialize new entries before parsing populates them, so a parse failure reaching the cleanup path leaves libssh2_publickey_list_free operating on an uninitialized entry. A malicious SSH server offering the publickey subsystem can use a malformed response to make cleanup free an uninitialized, attacker-influenceable attrs pointer in a connecting libssh2 client.

🎖@cveNotify

🚨 CVE-2026-58053
Gitea act_runner with the Docker backend (through act 0.262.0) passes a workflow's container.options string to the Docker job container's HostConfig and, when configured with privileged: false, forces only the Privileged flag off while merging options such as --pid=host, --cap-add, and --security-opt unchanged. A user who can run a workflow on a Docker-backed runner can create a job container with host namespaces and broad capabilities and escape to the host as root despite privileged mode being disabled.

🎖@cveNotify

🚨 CVE-2026-58056
RustDesk gates incoming control messages on per-capability flags rather than on the session's authorized connection type, and a file-transfer session does not clear those flags. A peer holding only a valid FileTransfer authorization can inject keyboard and mouse input and reach the unguarded screenshot and display-capture handlers, acting outside its granted scope.

🎖@cveNotify

🚨 CVE-2026-58058
Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans.

🎖@cveNotify

🚨 CVE-2026-10593
The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream-qos pointer with only a stream != NULL guard. stream-qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep-qos struct, eliminating the NULL dereference.

🎖@cveNotify

🚨 CVE-2026-10644
The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte past the end of the caller-supplied buffer (CWE-787). The overflowed byte's value is the UART RX data supplied by the connected serial peer (adjacent attacker), while its size and location are fixed at one byte immediately after the buffer. Exploitation requires the async UART config (not enabled by default on the in-tree PIC32CM-JH boards) and a consumer that enables RX with a one-byte buffer; impact is limited single-byte memory corruption adjacent to the RX buffer (possible crash / denial of service). The defect shipped in v4.4.0. The fix reads the first byte with the CPU and, for one-byte buffers, performs no DMA at all; for larger buffers it sizes the DMA for the remaining len-1 bytes.

🎖@cveNotify

🚨 CVE-2026-10646
Zephyr's BSD-sockets getaddrinfo() implementation (subsys/net/lib/sockets/getaddrinfo.c) passes a pointer to a stack-allocated state object (struct getaddrinfo_state ai_state) as the user_data of an asynchronous DNS resolver query. The socket layer waits on a semaphore with a timeout deliberately set slightly longer than the resolver's own per-query timeout. When that semaphore wait nonetheless times out (-EAGAIN) - which can occur when the resolver's timeout work is delayed by workqueue contention, or in the documented multi-retry configuration where CONFIG_NET_SOCKETS_DNS_TIMEOUT exceeds CONFIG_NET_SOCKETS_DNS_BACKOFF_INTERVAL - the pre-fix code retries the query (goto again) without cancelling the previous one and without resetting the semaphore. The previous query slot remains active in the resolver with its callback and the stack pointer as user_data, and ai_state-dns_id is overwritten so the stale query can no longer be cancelled. A subsequent DNS response delivered over UDP and matched by its 16-bit transaction id (in dispatcher_cb()/dns_read()), or the resolver's own delayed query-timeout work, then invokes dns_resolve_cb() against the now out-of-scope stack frame, writing through the stale pointer (state-status, state-idx, state-ai_arr[], and k_sem_give()). Because the triggering response is network-delivered and its 16-bit id is spoofable/replayable by an on- or off-path attacker, this is a network-influenceable use-after-return that can corrupt reused stack memory, leading to crashes/denial of service or memory corruption. The fix cancels the timed-out query by name and type before retrying and resets the local semaphore, eliminating the stale callback path. Affected: Zephyr v4.0.0 through v4.4.0.

🎖@cveNotify

🚨 CVE-2026-10083
The APCu Manager WordPress plugin before 4.5.0 does not escape APCu object-cache keys before rendering them in an admin-area page, leading to a Stored Cross-Site Scripting vulnerability. When a persistent object cache is enabled, cache keys derived from unsanitised user input (e.g. a transient name created by another APCu Manager WordPress plugin before 4.5.0 from an unauthenticated request) are output without escaping and execute arbitrary JavaScript in the session of an administrator viewing the page.

🎖@cveNotify

🚨 CVE-2026-9676
The F4 Post Tree WordPress plugin before 2.0.5 does not perform capability checks or CSRF/nonce verification on one of its AJAX actions, allowing authenticated users with Subscriber-level access and above to modify the parent and menu order of arbitrary posts.

🎖@cveNotify

🚨 CVE-2026-22078
Because O+ Connect's IPC service does not authenticate clients, external applications can escalate privileges and perform sensitive actions through the IPC channel.

🎖@cveNotify