🚨 CVE-2026-41049
Incorrect caching of authentication between different users of the  qSnapper dbus service before version 1.3.3 allowed any local attacker to use dbus functions after a privileged users has authenticated for them.

🎖@cveNotify

🚨 CVE-2026-12163
Fortra File Integrity Monitoring (FIM), formerly Tripwire Enterprise, versions prior to 9.4.0.1 contain a stored cross-site scripting (XSS) vulnerability in the Asset View UI component. An authenticated user with sufficient privileges to create or modify affected node or database configuration fields could store script content that may be rendered as HTML instead of safely escaped text when the affected Asset View UI content is displayed.

🎖@cveNotify

🚨 CVE-2026-10643
Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0.

🎖@cveNotify

🚨 CVE-2026-8095
The Frontend File Manager Plugin plugin for WordPress is vulnerable to Authenticated Arbitrary File Deletion in versions up to and including 23.6. This is due to a case-sensitive bypass of the wpfm_dir_path parameter sanitization in the wpfm_file_meta_update AJAX handler, where supplying WPFM_DIR_PATH in uppercase evades the unset check and is normalized to wpfm_dir_path by sanitize_key() during update_post_meta(), allowing an attacker to overwrite the stored file path with an arbitrary filesystem path that is then passed directly to unlink() in delete_file_locally() without any directory containment validation. This makes it possible for authenticated attackers with Subscriber-level access to delete arbitrary files on the server, including sensitive files such as wp-config.php, potentially leading to full site takeover.

🎖@cveNotify

🚨 CVE-2026-56113
dhcpcd through 10.3.2, fixed in commit 5733d3c, contains a heap use-after-free vulnerability that allows unauthenticated same-link attackers to crash the daemon by sending a crafted DHCPv6 RENEW reply with RFC6603 OPTION_PD_EXCLUDE and both preferred and valid lifetimes set to zero. Attackers acting as or impersonating a DHCPv6 server can trigger dhcp6_deprecatedele() to free a delegated child address while an outer TAILQ_FOREACH_SAFE iterator in dhcp6_deprecateaddrs() still holds the freed pointer, causing a use-after-free when TAILQ_REMOVE is reached.

🎖@cveNotify

🚨 CVE-2026-56114
dhcpcd through 10.3.2, fixed in commit 2f00c7b, contains a one-byte stack out-of-bounds write vulnerability in dhcp6_makemessage() in src/dhcp6.c that allows unauthenticated same-link attackers to write beyond a fixed local buffer by serializing an oversized RFC6603 OPTION_PD_EXCLUDE option body. Attackers can send a crafted DHCPv6 ADVERTISE message containing an IA_PD IAPREFIX /0 with a valid OPTION_PD_EXCLUDE using an exclude prefix length of /121 through /128 to trigger the out-of-bounds write and potentially corrupt adjacent stack memory.

🎖@cveNotify

🚨 CVE-2026-56115
Bootimus through 0.1.70 contains a broken access control vulnerability that allows authenticated low-privileged users to perform administrative actions by exploiting missing role enforcement in the JWTMiddleware function in internal/auth/auth.go, which validates JWT tokens and account status but fails to inspect the is_admin flag. Attackers can send requests to any endpoint under the /api/users path to create new administrator accounts or reset administrator passwords, thereby gaining full control of the server and the ability to modify boot menus and installation scripts served to PXE clients.

🎖@cveNotify

🚨 CVE-2026-56116
dhcpcd through 10.3.2, fixed in commit 708b4a5, contains a memory leak vulnerability in the IPv6 Router Advertisement route information handling that allows an unauthenticated same-link attacker to cause denial of service by sending crafted Router Advertisements. Attackers can repeatedly send Router Advertisements containing Route Information options with a lifetime of zero, triggering unfreed allocations in routeinfo_findalloc() that cause linear memory exhaustion and eventual daemon crash.

🎖@cveNotify

🚨 CVE-2026-56117
dhcpcd through 10.3.2, fixed in commit 78ea09e, contains a heap use-after-free vulnerability in the control socket handling within src/control.c that allows local unprivileged attackers to trigger memory corruption when privilege separation is disabled. Attackers can connect to the control socket and send a privileged command such as -x, causing control_recvdata() to free the client object while the same READ+HANGUP event subsequently reaches control_hangup() with the stale pointer, resulting in a use-after-free condition exploitable in deployments using --disable-privsep or where privsep initialization has failed with the control socket operating in mode 0666.

🎖@cveNotify

🚨 CVE-2026-58049
FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.

🎖@cveNotify

🚨 CVE-2026-58050
libssh2 through 1.11.1 reads an attacker-controlled 32-bit attribute count from a publickey-subsystem response and uses it in the allocation num_attrs * sizeof(libssh2_publickey_attribute) without bounds checking, so on 32-bit platforms the multiplication overflows to an undersized buffer. A malicious SSH server can then drive the attribute-parsing loop to write past the allocation, causing a heap buffer overflow in a connecting libssh2 client.

🎖@cveNotify

🚨 CVE-2026-58051
libssh2 through 1.11.1 grows its publickey list with SSH2_REALLOC but does not zero-initialize new entries before parsing populates them, so a parse failure reaching the cleanup path leaves libssh2_publickey_list_free operating on an uninitialized entry. A malicious SSH server offering the publickey subsystem can use a malformed response to make cleanup free an uninitialized, attacker-influenceable attrs pointer in a connecting libssh2 client.

🎖@cveNotify

🚨 CVE-2026-58052
7-Zip for Windows through 26.02 fails to preserve the Mark-of-the-Web when extracting a crafted RAR5 archive, because its guard that suppresses an archive-supplied Zone.Identifier stream matches the exact name 'Zone.Identifier' while a RAR5 STM record named ':Zone.Identifier:$DATA' is not matched and NTFS canonicalizes it to the same stream, overwriting the propagated Internet-zone marker with ZoneId=0. A second STM record named '::$DATA' overwrites the extracted file's default data stream, letting an attacker defeat SmartScreen/MotW warnings and spoof file content.

🎖@cveNotify

🚨 CVE-2026-58053
Gitea act_runner with the Docker backend (through act 0.262.0) passes a workflow's container.options string to the Docker job container's HostConfig and, when configured with privileged: false, forces only the Privileged flag off while merging options such as --pid=host, --cap-add, and --security-opt unchanged. A user who can run a workflow on a Docker-backed runner can create a job container with host namespaces and broad capabilities and escape to the host as root despite privileged mode being disabled.

🎖@cveNotify

🚨 CVE-2026-58054
MyBB 1.8.40 does not restrict which usergroup a limited Admin Control Panel user may assign when creating or editing users; the user module offers the Administrators group (gid 4) and its datahandler's verify_usergroup() unconditionally returns true. An admin holding only the delegated user-management permission can assign the Administrators group to an account and escalate to the full Administrator permission set.

🎖@cveNotify

🚨 CVE-2026-58055
nghttp2's nghttpx proxy through 1.69.0 forwards an HTTP/1.1 Upgrade request that also carries a Content-Length header and body onto reusable keep-alive backend connections, re-adding the Upgrade and Connection headers while passing Content-Length verbatim. A backend that resolves the resulting ambiguous message in the attacker's favor enables HTTP request/response smuggling and cross-client response-queue poisoning.

🎖@cveNotify

🚨 CVE-2026-58056
RustDesk gates incoming control messages on per-capability flags rather than on the session's authorized connection type, and a file-transfer session does not clear those flags. A peer holding only a valid FileTransfer authorization can inject keyboard and mouse input and reach the unguarded screenshot and display-capture handlers, acting outside its granted scope.

🎖@cveNotify

🚨 CVE-2026-58057
Flowise before 3.1.3 validates Custom MCP stdio environment variables against a denylist using a case-sensitive comparison, so on Windows, where environment names are case-insensitive, supplying 'node_options' bypasses the NODE_OPTIONS denylist entry. An authenticated user who can configure a Custom MCP node can thereby inject NODE_OPTIONS --require and execute arbitrary code in the Flowise server context.

🎖@cveNotify

🚨 CVE-2026-58058
Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans.

🎖@cveNotify

🚨 CVE-2026-10593
The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream-qos pointer with only a stream != NULL guard. stream-qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep-qos struct, eliminating the NULL dereference.

🎖@cveNotify

🚨 CVE-2026-10644
The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte past the end of the caller-supplied buffer (CWE-787). The overflowed byte's value is the UART RX data supplied by the connected serial peer (adjacent attacker), while its size and location are fixed at one byte immediately after the buffer. Exploitation requires the async UART config (not enabled by default on the in-tree PIC32CM-JH boards) and a consumer that enables RX with a one-byte buffer; impact is limited single-byte memory corruption adjacent to the RX buffer (possible crash / denial of service). The defect shipped in v4.4.0. The fix reads the first byte with the CPU and, for one-byte buffers, performs no DMA at all; for larger buffers it sizes the DMA for the remaining len-1 bytes.

🎖@cveNotify