🚨 CVE-2026-41727
Spring Kafka's retry topic infrastructure did not sufficiently validate user-controlled header values before acting on them. A producer could send a record with a crafted retry_topic-attempts header to supply an out-of-range attempt count and cause the retry topic router to misidentify where the message was in the retry sequence.
Affected versions:
Spring for Apache Kafka 4.0.0 through 4.0.5; 3.3.0 through 3.3.15; 3.2.0 through 3.2.13; 2.9.0 through 2.9.13; 2.8.0 through 2.8.11.
🎖@cveNotify
Spring Kafka's retry topic infrastructure did not sufficiently validate user-controlled header values before acting on them. A producer could send a record with a crafted retry_topic-attempts header to supply an out-of-range attempt count and cause the retry topic router to misidentify where the message was in the retry sequence.
Affected versions:
Spring for Apache Kafka 4.0.0 through 4.0.5; 3.3.0 through 3.3.15; 3.2.0 through 3.2.13; 2.9.0 through 2.9.13; 2.8.0 through 2.8.11.
🎖@cveNotify
CVE-2026-41727: In Spring for Apache Kafka, forged retry topic headers subvert retry routing and backoff behavior
Level up your Java code and explore what Spring can do for you.
🚨 CVE-2026-41731
JsonKafkaHeaderMapper and the deprecated DefaultKafkaHeaderMapper matched type headers against trusted packages using a prefix check, meaning that trusting any package implicitly trusted all of its subpackages. Combined with Jackson's default bean deserialization, a producer could supply crafted header values that caused the consumer to deserialize arbitrary JDK types.
Affected versions:
Spring for Apache Kafka 4.0.0 through 4.0.5; 3.3.0 through 3.3.15; 3.2.0 through 3.2.13; 2.9.0 through 2.9.13; 2.8.0 through 2.8.11.
🎖@cveNotify
JsonKafkaHeaderMapper and the deprecated DefaultKafkaHeaderMapper matched type headers against trusted packages using a prefix check, meaning that trusting any package implicitly trusted all of its subpackages. Combined with Jackson's default bean deserialization, a producer could supply crafted header values that caused the consumer to deserialize arbitrary JDK types.
Affected versions:
Spring for Apache Kafka 4.0.0 through 4.0.5; 3.3.0 through 3.3.15; 3.2.0 through 3.2.13; 2.9.0 through 2.9.13; 2.8.0 through 2.8.11.
🎖@cveNotify
CVE-2026-41731: In Spring for Apache Kafka, overly broad trusted-package matching in header mappers exposes JDK classes to deserialization
Level up your Java code and explore what Spring can do for you.
🚨 CVE-2026-41732
JsonPulsarHeaderMapper matched type headers against trusted packages using a prefix check, meaning that trusting any package implicitly trusted all of its subpackages. Additionally, an empty trusted-packages configuration fell back to trusting all packages rather than applying a safe default allow-list.
Affected versions:
Spring for Apache Pulsar 2.0.0 through 2.0.5; 1.2.0 through 1.2.17; 1.1.0 through 1.1.17.
🎖@cveNotify
JsonPulsarHeaderMapper matched type headers against trusted packages using a prefix check, meaning that trusting any package implicitly trusted all of its subpackages. Additionally, an empty trusted-packages configuration fell back to trusting all packages rather than applying a safe default allow-list.
Affected versions:
Spring for Apache Pulsar 2.0.0 through 2.0.5; 1.2.0 through 1.2.17; 1.1.0 through 1.1.17.
🎖@cveNotify
CVE-2026-41732: In Spring for Apache Pulsar, overly broad trusted-package matching in header mapper exposes JDK classes to deserialization
Level up your Java code and explore what Spring can do for you.
🚨 CVE-2026-6733
Impact:
Undici's HTTP/1.1 client is vulnerable to response queue poisoning on reused keep-alive sockets. An attacker-controlled upstream server can inject an unsolicited HTTP/1.1 response onto an idle socket after a request completes. When the client dispatches the next request on that socket, it associates the injected response with the new request, causing responses to be delivered to the wrong requests.
This requires an attacker-controlled or compromised upstream HTTP/1.1 server and keep-alive connection reuse.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
Disable keep-alive connection reuse by setting keepAliveTimeout: 0 on the Client or Pool.
🎖@cveNotify
Impact:
Undici's HTTP/1.1 client is vulnerable to response queue poisoning on reused keep-alive sockets. An attacker-controlled upstream server can inject an unsolicited HTTP/1.1 response onto an idle socket after a request completes. When the client dispatches the next request on that socket, it associates the injected response with the new request, causing responses to be delivered to the wrong requests.
This requires an attacker-controlled or compromised upstream HTTP/1.1 server and keep-alive connection reuse.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
Disable keep-alive connection reuse by setting keepAliveTimeout: 0 on the Client or Pool.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-6734
Impact:
When using Socks5ProxyAgent, undici reuses a single connection pool across different origins without verifying that the pool's origin matches the requested origin. All requests are dispatched through the pool connected to the first origin, regardless of the intended destination.
This causes cross-origin request routing: credentials and request data intended for origin B are sent to origin A, responses from the wrong origin are trusted, and HTTPS requests may be silently downgraded to HTTP.
Impacted users are applications that use Socks5ProxyAgent (directly or via setGlobalDispatcher) and make requests to more than one origin.
This was introduced in undici 7.23.0 via PR #4385 and affects all versions through 8.1.0.
Patches:
Upgrade to undici v7.26.0 or v8.2.0.
Workarounds:
Use a separate Socks5ProxyAgent instance per origin, or avoid using Socks5ProxyAgent with multiple origins.
🎖@cveNotify
Impact:
When using Socks5ProxyAgent, undici reuses a single connection pool across different origins without verifying that the pool's origin matches the requested origin. All requests are dispatched through the pool connected to the first origin, regardless of the intended destination.
This causes cross-origin request routing: credentials and request data intended for origin B are sent to origin A, responses from the wrong origin are trusted, and HTTPS requests may be silently downgraded to HTTP.
Impacted users are applications that use Socks5ProxyAgent (directly or via setGlobalDispatcher) and make requests to more than one origin.
This was introduced in undici 7.23.0 via PR #4385 and affects all versions through 8.1.0.
Patches:
Upgrade to undici v7.26.0 or v8.2.0.
Workarounds:
Use a separate Socks5ProxyAgent instance per origin, or avoid using Socks5ProxyAgent with multiple origins.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-12528
A flaw was found in 389 Directory Server in the __aclp__normalize_acltxt() function of aclparse.c. A malformed ACI (Access Control Instruction) string can trigger heap-buffer-overflow writes and reads during ACI parsing. The function fails to validate that the ACI keyword has sufficient length after whitespace stripping, leading to a 1-byte out-of-bounds write and subsequent out-of-bounds reads. An authenticated user with write access to the aci attribute could send a crafted ACI value to silently corrupt heap memory in the directory server process.
🎖@cveNotify
A flaw was found in 389 Directory Server in the __aclp__normalize_acltxt() function of aclparse.c. A malformed ACI (Access Control Instruction) string can trigger heap-buffer-overflow writes and reads during ACI parsing. The function fails to validate that the ACI keyword has sufficient length after whitespace stripping, leading to a 1-byte out-of-bounds write and subsequent out-of-bounds reads. An authenticated user with write access to the aci attribute could send a crafted ACI value to silently corrupt heap memory in the directory server process.
🎖@cveNotify
🚨 CVE-2026-56099
OpenBSD before commit 6a23123 (2026-06-18) contains an out-of-bounds read vulnerability in the mpls_do_error function within sys/netmpls/mpls_input.c that allows remote attackers to disclose kernel stack memory by sending crafted MPLS frames with 16 labels and no Bottom-of-Stack bit set.
🎖@cveNotify
OpenBSD before commit 6a23123 (2026-06-18) contains an out-of-bounds read vulnerability in the mpls_do_error function within sys/netmpls/mpls_input.c that allows remote attackers to disclose kernel stack memory by sending crafted MPLS frames with 16 labels and no Bottom-of-Stack bit set.
🎖@cveNotify
GitHub
Drop the incoming packet containing 16 MPLS labels with no BoS bit. · openbsd/src@6a23123
ok claudio
🚨 CVE-2026-41045
A time-to-check-time-of-use in polkit authentication of qSnapper before version 1.3.3 allowed a local attacker to bypass qSnappers authentication mechanism and operate e.g. as root user.
🎖@cveNotify
A time-to-check-time-of-use in polkit authentication of qSnapper before version 1.3.3 allowed a local attacker to bypass qSnappers authentication mechanism and operate e.g. as root user.
🎖@cveNotify
🚨 CVE-2026-41046
A path traversal attack when using a "configName" parameter in qSnapper before version 1.3.3 allowed a local attacker to use malicious config files for snapper and so cause a denial of service or potentially escalate privileges to root.
🎖@cveNotify
A path traversal attack when using a "configName" parameter in qSnapper before version 1.3.3 allowed a local attacker to use malicious config files for snapper and so cause a denial of service or potentially escalate privileges to root.
🎖@cveNotify
🚨 CVE-2026-41047
Lack of authentication when using the "snapshot diff" functions in qSnapper before version 1.3.3 allowed a local attacker to see otherwise read protected information.
🎖@cveNotify
Lack of authentication when using the "snapshot diff" functions in qSnapper before version 1.3.3 allowed a local attacker to see otherwise read protected information.
🎖@cveNotify
🚨 CVE-2026-41048
Incorrect caching of authentication between different polkit methods in qSnapper before version 1.3.3 allowed a local attacker to use functions like "restore from snapshot" even if only allowed to do "delete snapshot".
🎖@cveNotify
Incorrect caching of authentication between different polkit methods in qSnapper before version 1.3.3 allowed a local attacker to use functions like "restore from snapshot" even if only allowed to do "delete snapshot".
🎖@cveNotify
🚨 CVE-2026-41049
Incorrect caching of authentication between different users of the qSnapper dbus service before version 1.3.3 allowed any local attacker to use dbus functions after a privileged users has authenticated for them.
🎖@cveNotify
Incorrect caching of authentication between different users of the qSnapper dbus service before version 1.3.3 allowed any local attacker to use dbus functions after a privileged users has authenticated for them.
🎖@cveNotify
🚨 CVE-2026-12163
Fortra File Integrity Monitoring (FIM), formerly Tripwire Enterprise, versions prior to 9.4.0.1 contain a stored cross-site scripting (XSS) vulnerability in the Asset View UI component. An authenticated user with sufficient privileges to create or modify affected node or database configuration fields could store script content that may be rendered as HTML instead of safely escaped text when the affected Asset View UI content is displayed.
🎖@cveNotify
Fortra File Integrity Monitoring (FIM), formerly Tripwire Enterprise, versions prior to 9.4.0.1 contain a stored cross-site scripting (XSS) vulnerability in the Asset View UI component. An authenticated user with sufficient privileges to create or modify affected node or database configuration fields could store script content that may be rendered as HTML instead of safely escaped text when the affected Asset View UI content is displayed.
🎖@cveNotify
🚨 CVE-2026-10643
Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0.
🎖@cveNotify
Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0.
🎖@cveNotify
GitHub
net: sockets: fix inet recvmsg ancillary buffer accounting · zephyrproject-rtos/zephyr@01fe77b
Use NET_CMSG_SPACE() when checking ancillary buffer capacity and
account for aligned cmsg storage in msg_controllen.
This keeps recvmsg() control-data handling consistent with cmsghdr
layout and a...
account for aligned cmsg storage in msg_controllen.
This keeps recvmsg() control-data handling consistent with cmsghdr
layout and a...
🚨 CVE-2026-8095
The Frontend File Manager Plugin plugin for WordPress is vulnerable to Authenticated Arbitrary File Deletion in versions up to and including 23.6. This is due to a case-sensitive bypass of the wpfm_dir_path parameter sanitization in the wpfm_file_meta_update AJAX handler, where supplying WPFM_DIR_PATH in uppercase evades the unset check and is normalized to wpfm_dir_path by sanitize_key() during update_post_meta(), allowing an attacker to overwrite the stored file path with an arbitrary filesystem path that is then passed directly to unlink() in delete_file_locally() without any directory containment validation. This makes it possible for authenticated attackers with Subscriber-level access to delete arbitrary files on the server, including sensitive files such as wp-config.php, potentially leading to full site takeover.
🎖@cveNotify
The Frontend File Manager Plugin plugin for WordPress is vulnerable to Authenticated Arbitrary File Deletion in versions up to and including 23.6. This is due to a case-sensitive bypass of the wpfm_dir_path parameter sanitization in the wpfm_file_meta_update AJAX handler, where supplying WPFM_DIR_PATH in uppercase evades the unset check and is normalized to wpfm_dir_path by sanitize_key() during update_post_meta(), allowing an attacker to overwrite the stored file path with an arbitrary filesystem path that is then passed directly to unlink() in delete_file_locally() without any directory containment validation. This makes it possible for authenticated attackers with Subscriber-level access to delete arbitrary files on the server, including sensitive files such as wp-config.php, potentially leading to full site takeover.
🎖@cveNotify
🚨 CVE-2026-56113
dhcpcd through 10.3.2, fixed in commit 5733d3c, contains a heap use-after-free vulnerability that allows unauthenticated same-link attackers to crash the daemon by sending a crafted DHCPv6 RENEW reply with RFC6603 OPTION_PD_EXCLUDE and both preferred and valid lifetimes set to zero. Attackers acting as or impersonating a DHCPv6 server can trigger dhcp6_deprecatedele() to free a delegated child address while an outer TAILQ_FOREACH_SAFE iterator in dhcp6_deprecateaddrs() still holds the freed pointer, causing a use-after-free when TAILQ_REMOVE is reached.
🎖@cveNotify
dhcpcd through 10.3.2, fixed in commit 5733d3c, contains a heap use-after-free vulnerability that allows unauthenticated same-link attackers to crash the daemon by sending a crafted DHCPv6 RENEW reply with RFC6603 OPTION_PD_EXCLUDE and both preferred and valid lifetimes set to zero. Attackers acting as or impersonating a DHCPv6 server can trigger dhcp6_deprecatedele() to free a delegated child address while an outer TAILQ_FOREACH_SAFE iterator in dhcp6_deprecateaddrs() still holds the freed pointer, causing a use-after-free when TAILQ_REMOVE is reached.
🎖@cveNotify
GitHub
DHCPv6: When deprecating addresses, restart on prefix deletions · NetworkConfiguration/dhcpcd@5733d3c
As that might invalidate the next address to iterate on.
Reported-by: CuB3y0nd <root@cubeyond.net>
Reported-by: CuB3y0nd <root@cubeyond.net>
🚨 CVE-2026-56114
dhcpcd through 10.3.2, fixed in commit 2f00c7b, contains a one-byte stack out-of-bounds write vulnerability in dhcp6_makemessage() in src/dhcp6.c that allows unauthenticated same-link attackers to write beyond a fixed local buffer by serializing an oversized RFC6603 OPTION_PD_EXCLUDE option body. Attackers can send a crafted DHCPv6 ADVERTISE message containing an IA_PD IAPREFIX /0 with a valid OPTION_PD_EXCLUDE using an exclude prefix length of /121 through /128 to trigger the out-of-bounds write and potentially corrupt adjacent stack memory.
🎖@cveNotify
dhcpcd through 10.3.2, fixed in commit 2f00c7b, contains a one-byte stack out-of-bounds write vulnerability in dhcp6_makemessage() in src/dhcp6.c that allows unauthenticated same-link attackers to write beyond a fixed local buffer by serializing an oversized RFC6603 OPTION_PD_EXCLUDE option body. Attackers can send a crafted DHCPv6 ADVERTISE message containing an IA_PD IAPREFIX /0 with a valid OPTION_PD_EXCLUDE using an exclude prefix length of /121 through /128 to trigger the out-of-bounds write and potentially corrupt adjacent stack memory.
🎖@cveNotify
GitHub
DHCPv6: Prefix exclude option can be 17 octets (#671) · NetworkConfiguration/dhcpcd@2f00c7b
Well that's a simple off by one error
Reported-by: CuB3y0nd <root@cubeyond.net>
Reported-by: CuB3y0nd <root@cubeyond.net>
🚨 CVE-2026-56115
Bootimus through 0.1.70 contains a broken access control vulnerability that allows authenticated low-privileged users to perform administrative actions by exploiting missing role enforcement in the JWTMiddleware function in internal/auth/auth.go, which validates JWT tokens and account status but fails to inspect the is_admin flag. Attackers can send requests to any endpoint under the /api/users path to create new administrator accounts or reset administrator passwords, thereby gaining full control of the server and the ability to modify boot menus and installation scripts served to PXE clients.
🎖@cveNotify
Bootimus through 0.1.70 contains a broken access control vulnerability that allows authenticated low-privileged users to perform administrative actions by exploiting missing role enforcement in the JWTMiddleware function in internal/auth/auth.go, which validates JWT tokens and account status but fails to inspect the is_admin flag. Attackers can send requests to any endpoint under the /api/users path to create new administrator accounts or reset administrator passwords, thereby gaining full control of the server and the ability to modify boot menus and installation scripts served to PXE clients.
🎖@cveNotify
GitHub
security: any logged-in user can take over the admin account · Issue #84 · garybowers/bootimus
Hi, I went through a Coordinated Vulnerability Disclosure program to report this issue but it seems it was not acknowledged. Not sure what happened, but I am sharing it here for clarity. Would be h...
🚨 CVE-2026-56116
dhcpcd through 10.3.2, fixed in commit 708b4a5, contains a memory leak vulnerability in the IPv6 Router Advertisement route information handling that allows an unauthenticated same-link attacker to cause denial of service by sending crafted Router Advertisements. Attackers can repeatedly send Router Advertisements containing Route Information options with a lifetime of zero, triggering unfreed allocations in routeinfo_findalloc() that cause linear memory exhaustion and eventual daemon crash.
🎖@cveNotify
dhcpcd through 10.3.2, fixed in commit 708b4a5, contains a memory leak vulnerability in the IPv6 Router Advertisement route information handling that allows an unauthenticated same-link attacker to cause denial of service by sending crafted Router Advertisements. Attackers can repeatedly send Router Advertisements containing Route Information options with a lifetime of zero, triggering unfreed allocations in routeinfo_findalloc() that cause linear memory exhaustion and eventual daemon crash.
🎖@cveNotify
GitHub
IPv6ND: Free routeinfo when it expires (#670) · NetworkConfiguration/dhcpcd@708b4a5
Reported-by: CuB3y0nd <root@cubeyond.net>
🚨 CVE-2026-56117
dhcpcd through 10.3.2, fixed in commit 78ea09e, contains a heap use-after-free vulnerability in the control socket handling within src/control.c that allows local unprivileged attackers to trigger memory corruption when privilege separation is disabled. Attackers can connect to the control socket and send a privileged command such as -x, causing control_recvdata() to free the client object while the same READ+HANGUP event subsequently reaches control_hangup() with the stale pointer, resulting in a use-after-free condition exploitable in deployments using --disable-privsep or where privsep initialization has failed with the control socket operating in mode 0666.
🎖@cveNotify
dhcpcd through 10.3.2, fixed in commit 78ea09e, contains a heap use-after-free vulnerability in the control socket handling within src/control.c that allows local unprivileged attackers to trigger memory corruption when privilege separation is disabled. Attackers can connect to the control socket and send a privileged command such as -x, causing control_recvdata() to free the client object while the same READ+HANGUP event subsequently reaches control_hangup() with the stale pointer, resulting in a use-after-free condition exploitable in deployments using --disable-privsep or where privsep initialization has failed with the control socket operating in mode 0666.
🎖@cveNotify
GitHub
control: Avoid hangup in the recvdata path · NetworkConfiguration/dhcpcd@78ea09e
Instead return an error and bubble it up where it can be
hangup / freed more cleanly.
Reported-by: CuB3y0nd <root@cubeyond.net>
hangup / freed more cleanly.
Reported-by: CuB3y0nd <root@cubeyond.net>
🚨 CVE-2026-58049
FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.
🎖@cveNotify
FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption.
🎖@cveNotify
GitHub
FFmpeg/libavcodec/rasc.c at master · FFmpeg/FFmpeg
Mirror of https://git.ffmpeg.org/ffmpeg.git. Contribute to FFmpeg/FFmpeg development by creating an account on GitHub.