🚨 CVE-2026-49323
Weak authentication between the Wireless Control Module (WCM) and the Engine Control Module (ECM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with read access to the in-vehicle network to recover the per-vehicle ECM immobilizer secret by passively observing a single seed/key exchange. The WCM derives its response using a reversible, non-cryptographic operation rather than a cryptographic challenge-response, so the persistent immobilizer secret can be reconstructed from one captured exchange. With this secret the attacker can authenticate to the ECM independently of the WCM and start the engine, defeating the immobilizer. Specific protocol details have been withheld pending vendor remediation.
🎖@cveNotify
Weak authentication between the Wireless Control Module (WCM) and the Engine Control Module (ECM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with read access to the in-vehicle network to recover the per-vehicle ECM immobilizer secret by passively observing a single seed/key exchange. The WCM derives its response using a reversible, non-cryptographic operation rather than a cryptographic challenge-response, so the persistent immobilizer secret can be reconstructed from one captured exchange. With this secret the attacker can authenticate to the ECM independently of the WCM and start the engine, defeating the immobilizer. Specific protocol details have been withheld pending vendor remediation.
🎖@cveNotify
www.asrg.io
CVE-2026-49323 | ASRG Security Advisory | ASRG
Weak authentication between the Wireless Control Module (WCM) and the Engine Control Module (ECM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year a
🚨 CVE-2026-49324
Uncontrolled resource consumption in the Wireless Control Module (WCM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with write access to the in-vehicle network to permanently immobilize the motorcycle. The WCM enforces a brute-force lockout on the immobilizer authentication algorithm, but the lockout counter is reachable by any unauthenticated message, has no session binding, and does not reset on power cycle. An attacker can deliberately trip the lockout with a small number of crafted frames, leaving the bike un-startable until dealer service. Specific thresholds have been withheld pending vendor remediation.
🎖@cveNotify
Uncontrolled resource consumption in the Wireless Control Module (WCM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with write access to the in-vehicle network to permanently immobilize the motorcycle. The WCM enforces a brute-force lockout on the immobilizer authentication algorithm, but the lockout counter is reachable by any unauthenticated message, has no session binding, and does not reset on power cycle. An attacker can deliberately trip the lockout with a small number of crafted frames, leaving the bike un-startable until dealer service. Specific thresholds have been withheld pending vendor remediation.
🎖@cveNotify
www.asrg.io
CVE-2026-49324 | ASRG Security Advisory | ASRG
Uncontrolled resource consumption in the Wireless Control Module (WCM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network a
🚨 CVE-2026-49316
Expected behavior violation in the in-vehicle network of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker to bypass the motorcycle's anti-theft shutdown by forcing the Wireless Control Module (WCM) into the CAN bus-off state. Using a well-known CAN error-frame injection technique against a periodic WCM transmission, the attacker drives the WCM CAN controller's transmit error counter past the bus-off threshold, after which the WCM stops transmitting all messages, including the shutdown command. Peer ECUs do not interpret WCM silence as a security event and continue normal operation, allowing the motorcycle to be operated despite the immobilizer never having been unlocked. Specific protocol details have been withheld pending vendor remediation.
🎖@cveNotify
Expected behavior violation in the in-vehicle network of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker to bypass the motorcycle's anti-theft shutdown by forcing the Wireless Control Module (WCM) into the CAN bus-off state. Using a well-known CAN error-frame injection technique against a periodic WCM transmission, the attacker drives the WCM CAN controller's transmit error counter past the bus-off threshold, after which the WCM stops transmitting all messages, including the shutdown command. Peer ECUs do not interpret WCM silence as a security event and continue normal operation, allowing the motorcycle to be operated despite the immobilizer never having been unlocked. Specific protocol details have been withheld pending vendor remediation.
🎖@cveNotify
cwe.mitre.org
CWE -
CWE-440: Expected Behavior Violation (4.20)
CWE-440: Expected Behavior Violation (4.20)
Common Weakness Enumeration (CWE) is a list of software weaknesses.
🚨 CVE-2026-49317
Incorrect behavior order in the Infotainment / Digital Round display of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker to bypass the PIN entry screen. The Infotainment uses presence of Wireless Control Module (WCM) traffic during its boot window as a proxy for whether an immobilizer is fitted; if no WCM messages are observed, it skips the PIN entry screen and shows the normal user interface. An attacker who silences the WCM during the boot window — for example via a separately tracked CAN bus-off technique — can present a fully unlocked Infotainment despite the PIN never being entered. Specific timing and protocol details have been withheld pending vendor remediation.
🎖@cveNotify
Incorrect behavior order in the Infotainment / Digital Round display of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker to bypass the PIN entry screen. The Infotainment uses presence of Wireless Control Module (WCM) traffic during its boot window as a proxy for whether an immobilizer is fitted; if no WCM messages are observed, it skips the PIN entry screen and shows the normal user interface. An attacker who silences the WCM during the boot window — for example via a separately tracked CAN bus-off technique — can present a fully unlocked Infotainment despite the PIN never being entered. Specific timing and protocol details have been withheld pending vendor remediation.
🎖@cveNotify
cwe.mitre.org
CWE -
CWE-696: Incorrect Behavior Order (4.20)
CWE-696: Incorrect Behavior Order (4.20)
Common Weakness Enumeration (CWE) is a list of software weaknesses.
🚨 CVE-2026-49318
Incorrect behavior order in the Infotainment / Digital Round display of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker to bypass the PIN entry screen. The Infotainment uses presence of Wireless Control Module (WCM) traffic during its boot window as a proxy for whether an immobilizer is fitted; if no WCM messages are observed, it skips the PIN entry screen and shows the normal user interface. An attacker who silences the WCM during the boot window — for example via a separately tracked CAN bus-off technique — can present a fully unlocked Infotainment despite the PIN never being entered. Specific timing and protocol details have been withheld pending vendor remediation.
🎖@cveNotify
Incorrect behavior order in the Infotainment / Digital Round display of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker to bypass the PIN entry screen. The Infotainment uses presence of Wireless Control Module (WCM) traffic during its boot window as a proxy for whether an immobilizer is fitted; if no WCM messages are observed, it skips the PIN entry screen and shows the normal user interface. An attacker who silences the WCM during the boot window — for example via a separately tracked CAN bus-off technique — can present a fully unlocked Infotainment despite the PIN never being entered. Specific timing and protocol details have been withheld pending vendor remediation.
🎖@cveNotify
cwe.mitre.org
CWE -
CWE-696: Incorrect Behavior Order (4.20)
CWE-696: Incorrect Behavior Order (4.20)
Common Weakness Enumeration (CWE) is a list of software weaknesses.
🚨 CVE-2026-49325
Improper handling of physical conditions in the bike-shutdown control of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows a physical attacker with access to the Wireless Control Module (WCM) wiring harness to bypass the anti-theft shutdown. The WCM signals shutdown to a peer ECU via a falling-edge voltage transition on a dedicated wire pair. The receiving ECU does not distinguish between an active shutdown pulse and an open-circuit / disconnected condition; interrupting the relevant wires leaves the motorcycle fully operable even though the WCM never validated the rider's PIN. Specific connector details have been withheld pending vendor remediation.
🎖@cveNotify
Improper handling of physical conditions in the bike-shutdown control of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows a physical attacker with access to the Wireless Control Module (WCM) wiring harness to bypass the anti-theft shutdown. The WCM signals shutdown to a peer ECU via a falling-edge voltage transition on a dedicated wire pair. The receiving ECU does not distinguish between an active shutdown pulse and an open-circuit / disconnected condition; interrupting the relevant wires leaves the motorcycle fully operable even though the WCM never validated the rider's PIN. Specific connector details have been withheld pending vendor remediation.
🎖@cveNotify
cwe.mitre.org
CWE -
CWE-1384: Improper Handling of Physical or Environmental Conditions (4.20)
CWE-1384: Improper Handling of Physical or Environmental Conditions (4.20)
Common Weakness Enumeration (CWE) is a list of software weaknesses.
🚨 CVE-2026-10118
A flaw was found in Poppler's Splash backend. A remote attacker could exploit this vulnerability by crafting a malicious PDF file that, when rendered, triggers an integer overflow in the `tilingPatternFill` function. This overflow leads to an undersized heap memory allocation, allowing a subsequent out-of-bounds write. Successful exploitation could result in arbitrary code execution, information disclosure, or denial of service within the context of the application processing the PDF.
🎖@cveNotify
A flaw was found in Poppler's Splash backend. A remote attacker could exploit this vulnerability by crafting a malicious PDF file that, when rendered, triggers an integer overflow in the `tilingPatternFill` function. This overflow leads to an undersized heap memory allocation, allowing a subsequent out-of-bounds write. Successful exploitation could result in arbitrary code execution, information disclosure, or denial of service within the context of the application processing the PDF.
🎖@cveNotify
🚨 CVE-2026-6893
A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP (Dynamic Host Configuration Protocol) options, such as a malicious hostname, to a system using dracut's legacy DHCP path. These options are improperly handled and written into temporary shell scripts without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs, potentially compromising the system's boot and network behavior.
🎖@cveNotify
A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP (Dynamic Host Configuration Protocol) options, such as a malicious hostname, to a system using dracut's legacy DHCP path. These options are improperly handled and written into temporary shell scripts without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs, potentially compromising the system's boot and network behavior.
🎖@cveNotify
🚨 CVE-2026-45258
dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).
🎖@cveNotify
dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).
🎖@cveNotify
🚨 CVE-2026-45259
sigqueue(2) was marked as permitted in capability mode with the introduction of Capsicum in 2011, but the implementation of kern_sigqueue did not include a capability mode check restricting signal delivery to the calling process's own PID.
A process in capability mode can use sigqueue(2) to send signals to any process it could signal following standard Unix permissions, bypassing the Capsicum sandbox restriction. A compromised sandboxed process could interfere with other processes, for example by sending SIGKILL or SIGSTOP. This could be any process running as the same user, or any process, for a superuser sandboxed process.
🎖@cveNotify
sigqueue(2) was marked as permitted in capability mode with the introduction of Capsicum in 2011, but the implementation of kern_sigqueue did not include a capability mode check restricting signal delivery to the calling process's own PID.
A process in capability mode can use sigqueue(2) to send signals to any process it could signal following standard Unix permissions, bypassing the Capsicum sandbox restriction. A compromised sandboxed process could interfere with other processes, for example by sending SIGKILL or SIGSTOP. This could be any process running as the same user, or any process, for a superuser sandboxed process.
🎖@cveNotify
🚨 CVE-2026-49412
The kernel handler for IPV6_MSFILTER dropped a serializing lock in order to copy the source-filter list from userspace, then reacquired the lock. During this window another thread could free the multicast filter structure, leaving the handler with a stale pointer to freed memory.
An unprivileged local user can exploit this use-after-free to escalate privileges.
🎖@cveNotify
The kernel handler for IPV6_MSFILTER dropped a serializing lock in order to copy the source-filter list from userspace, then reacquired the lock. During this window another thread could free the multicast filter structure, leaving the handler with a stale pointer to freed memory.
An unprivileged local user can exploit this use-after-free to escalate privileges.
🎖@cveNotify
🚨 CVE-2026-49413
The Linuxulator determined whether a binary was set-user-ID or set-group-ID by checking the P_SUGID process flag. During execve(2), this flag is not yet set at the point where the auxiliary vector is constructed, so AT_SECURE was incorrectly set to zero for set-user-ID and set-group-ID executables.
An unprivileged local user can inject a shared library via LD_PRELOAD into a set-user-ID or set-group-ID Linux binary, gaining the privileges of that binary.
🎖@cveNotify
The Linuxulator determined whether a binary was set-user-ID or set-group-ID by checking the P_SUGID process flag. During execve(2), this flag is not yet set at the point where the auxiliary vector is constructed, so AT_SECURE was incorrectly set to zero for set-user-ID and set-group-ID executables.
An unprivileged local user can inject a shared library via LD_PRELOAD into a set-user-ID or set-group-ID Linux binary, gaining the privileges of that binary.
🎖@cveNotify
🚨 CVE-2026-49417
Second, the audio buffer backing a mapping could be freed when the device was closed even though the mapping remained valid. The freed memory could then be reused elsewhere while still accessible through the stale mapping.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).
🎖@cveNotify
Second, the audio buffer backing a mapping could be freed when the device was closed even though the mapping remained valid. The freed memory could then be reused elsewhere while still accessible through the stale mapping.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).
🎖@cveNotify
🚨 CVE-2026-49414
The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before. As a result, a user-requested ASLR disable was still in effect at the point where the base address was chosen.
An unprivileged local user can disable ASLR for a setuid PIE binary by calling procctl(2) before execve(2). This makes exploitation of any separate memory corruption vulnerability in that binary significantly easier.
🎖@cveNotify
The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before. As a result, a user-requested ASLR disable was still in effect at the point where the base address was chosen.
An unprivileged local user can disable ASLR for a setuid PIE binary by calling procctl(2) before execve(2). This makes exploitation of any separate memory corruption vulnerability in that binary significantly easier.
🎖@cveNotify
🚨 CVE-2026-49416
The CONS_HISTORY ioctl handler did not adequately validate the requested history size. A large value caused an integer overflow in the buffer size calculation, resulting in a heap allocation smaller than expected. Subsequent initialization of the buffer wrote beyond the end of the allocation.
An unprivileged local user with access to a vt(4) device can trigger an out-of-bounds write in the kernel, potentially escalating privileges.
🎖@cveNotify
The CONS_HISTORY ioctl handler did not adequately validate the requested history size. A large value caused an integer overflow in the buffer size calculation, resulting in a heap allocation smaller than expected. Subsequent initialization of the buffer wrote beyond the end of the allocation.
An unprivileged local user with access to a vt(4) device can trigger an out-of-bounds write in the kernel, potentially escalating privileges.
🎖@cveNotify
🚨 CVE-2026-46252
In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix locking in regulator_resolve_supply() error path
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix locking in regulator_resolve_supply() error path
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference.
🎖@cveNotify
🚨 CVE-2026-52938
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get().
🎖@cveNotify
🚨 CVE-2026-53070
In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver
🎖@cveNotify
🚨 CVE-2026-9496
Versions of the package pacote from 11.2.7 and before 21.5.1 are vulnerable to Denial of Service (DoS) via the addGitSha function. An attacker can exploit this vulnerability by supplying a specially crafted spec.rawSpec value that triggers the function’s regex replacement and string-manipulation logic, causing excessive CPU consumption and potentially stalling or crashing the process.
🎖@cveNotify
Versions of the package pacote from 11.2.7 and before 21.5.1 are vulnerable to Denial of Service (DoS) via the addGitSha function. An attacker can exploit this vulnerability by supplying a specially crafted spec.rawSpec value that triggers the function’s regex replacement and string-manipulation logic, causing excessive CPU consumption and potentially stalling or crashing the process.
🎖@cveNotify
🚨 CVE-2024-54011
Penetration Testing engineers at Amazon have discovered a flaw where the camera system fails to properly handle data supplied in certain requests, causing a service disruption. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds.
🎖@cveNotify
Penetration Testing engineers at Amazon have discovered a flaw where the camera system fails to properly handle data supplied in certain requests, causing a service disruption. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds.
🎖@cveNotify
🚨 CVE-2024-54013
Penetration Testing engineers at Amazon have identified a security flaw related to request handling in the web server component that could, under certain conditions, lead to unintended access to protected functions. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds
🎖@cveNotify
Penetration Testing engineers at Amazon have identified a security flaw related to request handling in the web server component that could, under certain conditions, lead to unintended access to protected functions. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds
🎖@cveNotify