🚨 CVE-2026-2651
A vulnerability in MLflow versions <=3.10.1.dev0 allows unauthorized access to multipart upload (MPU) endpoints when the `--serve-artifacts` mode is enabled. The authorization logic does not enforce resource-level permission checks for `/mlflow-artifacts/mpu/*` endpoints, enabling attackers to overwrite artifacts belonging to other users. This can lead to unauthorized cross-user writes, model supply chain poisoning, and arbitrary code execution when compromised models are loaded. The issue is resolved in version 3.10.0.
🎖@cveNotify
A vulnerability in MLflow versions <=3.10.1.dev0 allows unauthorized access to multipart upload (MPU) endpoints when the `--serve-artifacts` mode is enabled. The authorization logic does not enforce resource-level permission checks for `/mlflow-artifacts/mpu/*` endpoints, enabling attackers to overwrite artifacts belonging to other users. This can lead to unauthorized cross-user writes, model supply chain poisoning, and arbitrary code execution when compromised models are loaded. The issue is resolved in version 3.10.0.
🎖@cveNotify
GitHub
Auth support for MPU endpoints (#20919) · mlflow/mlflow@d729081
Signed-off-by: Tomu Hirata <tomu.hirata@gmail.com>
🚨 CVE-2026-48710
Starlette is a lightweight ASGI framework/toolkit. Prior to version 1.0.1, the HTTP `Host` request header was not validated before being used to reconstruct `request.url`. Because the routing algorithm relies on the raw HTTP path while `request.url` is rebuilt from the `Host` header, a malformed header could make `request.url.path` differ from the path that was actually requested. Middleware and endpoints that apply security restrictions based on `request.url` (rather than the raw `scope` path) could therefore be bypassed. Users should upgrade to a version greater than or equal to version 1.0.1, which validates the `Host` header against the grammar of RFC 9112 §3.2 / RFC 3986 §3.2.2 when constructing `request.url` and falls back to `scope["server"]` for malformed values.
🎖@cveNotify
Starlette is a lightweight ASGI framework/toolkit. Prior to version 1.0.1, the HTTP `Host` request header was not validated before being used to reconstruct `request.url`. Because the routing algorithm relies on the raw HTTP path while `request.url` is rebuilt from the `Host` header, a malformed header could make `request.url.path` differ from the path that was actually requested. Middleware and endpoints that apply security restrictions based on `request.url` (rather than the raw `scope` path) could therefore be bypassed. Users should upgrade to a version greater than or equal to version 1.0.1, which validates the `Host` header against the grammar of RFC 9112 §3.2 / RFC 3986 §3.2.2 when constructing `request.url` and falls back to `scope["server"]` for malformed values.
🎖@cveNotify
CVE-2026-48710 - Nemesis - BadHost
BadHost - CVE-2026-48710 Starlette Host-Header Auth Bypass
Free scanner for the critical Starlette auth bypass CVE-2026-48710 (BadHost). Affects FastAPI, MCP servers, LLM proxies, AI agent frameworks, and thousands of Python ASGI apps.
🚨 CVE-2026-11807
A missing authorization vulnerability was found in the Event-Driven Ansible (EDA) websocket API. The /api/eda/ws/ansible-rulebook endpoint does not verify user permissions when processing Worker messages. Any authenticated user can send a forged message with an arbitrary activation_id to receive plaintext credentials associated with that activation, including OAuth tokens, vault passwords, and SSH keys.
🎖@cveNotify
A missing authorization vulnerability was found in the Event-Driven Ansible (EDA) websocket API. The /api/eda/ws/ansible-rulebook endpoint does not verify user permissions when processing Worker messages. Any authenticated user can send a forged message with an arbitrary activation_id to receive plaintext credentials associated with that activation, including OAuth tokens, vault passwords, and SSH keys.
🎖@cveNotify
🚨 CVE-2026-49980
Rclone is a command-line program to sync files and directories to and from different cloud storage providers. From 1.46.0 until 1.74.3, rclone rcd --rc-serve accepts unauthenticated GET and HEAD requests to paths of the form: /[remote:path]/object. The remote value is parsed from the URL and passed to normal backend initialization. Inline remote configuration can set backend options that execute local commands during initialization. As a result, a single unauthenticated GET or HEAD request can execute a command as the rclone process user. This vulnerability is fixed in 1.74.3.
🎖@cveNotify
Rclone is a command-line program to sync files and directories to and from different cloud storage providers. From 1.46.0 until 1.74.3, rclone rcd --rc-serve accepts unauthenticated GET and HEAD requests to paths of the form: /[remote:path]/object. The remote value is parsed from the URL and passed to normal backend initialization. Inline remote configuration can set backend options that execute local commands during initialization. As a result, a single unauthenticated GET or HEAD request can execute a command as the rclone process user. This vulnerability is fixed in 1.74.3.
🎖@cveNotify
GitHub
Unauthenticated command execution in `rclone rcd --rc-serve` via inline remote instantiation
## Summary
`rclone rcd --rc-serve` accepts unauthenticated `GET` and `HEAD` requests to paths of the form:
```text
/[remote:path]/object
```
The `remote` value is parsed from the URL and...
`rclone rcd --rc-serve` accepts unauthenticated `GET` and `HEAD` requests to paths of the form:
```text
/[remote:path]/object
```
The `remote` value is parsed from the URL and...
🚨 CVE-2026-13281
Integer overflow in Mojo in Google Chrome prior to 149.0.7827.201 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a malicious file. (Chromium security severity: High)
🎖@cveNotify
Integer overflow in Mojo in Google Chrome prior to 149.0.7827.201 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a malicious file. (Chromium security severity: High)
🎖@cveNotify
Chrome Releases
Stable Channel Update for Desktop
The Stable channel has been updated to 149.0.7827.200/201 for Windows and Mac and 149.0.7827.200 for Linux, which will roll out over the co...
🚨 CVE-2026-13283
Use after free in AdFilter in Google Chrome on Android prior to 149.0.7827.201 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High)
🎖@cveNotify
Use after free in AdFilter in Google Chrome on Android prior to 149.0.7827.201 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High)
🎖@cveNotify
Chrome Releases
Stable Channel Update for Desktop
The Stable channel has been updated to 149.0.7827.200/201 for Windows and Mac and 149.0.7827.200 for Linux, which will roll out over the co...
🚨 CVE-2026-40083
Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior have SQL Injection through unsanitized unserialize+implode in managers.php. At line 756 of managers.php, the application assigns $selected_items by calling cacti_unserialize(stripslashes(gnrv('selected_graphs_array'))). The cacti_unserialize() function calls unserialize() with allowed_classes set to false, which prevents object injection but still allows arbitrary string arrays to be deserialized. Then, at lines 760 to 766, the deserialized array values are passed directly into db_execute('DELETE FROM snmpagent_managers WHERE id IN (' . implode(',', $selected_items) . ')'), where they are imploded into the SQL statement without any integer validation, resulting in SQL Injection when using SNMP agent management permissions. This issue has been fixed in version 1.2.31.
🎖@cveNotify
Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior have SQL Injection through unsanitized unserialize+implode in managers.php. At line 756 of managers.php, the application assigns $selected_items by calling cacti_unserialize(stripslashes(gnrv('selected_graphs_array'))). The cacti_unserialize() function calls unserialize() with allowed_classes set to false, which prevents object injection but still allows arbitrary string arrays to be deserialized. Then, at lines 760 to 766, the deserialized array values are passed directly into db_execute('DELETE FROM snmpagent_managers WHERE id IN (' . implode(',', $selected_items) . ')'), where they are imploded into the SQL statement without any integer validation, resulting in SQL Injection when using SNMP agent management permissions. This issue has been fixed in version 1.2.31.
🎖@cveNotify
GitHub
Release v1.2.31 · Cacti/cacti
Release of Cacti 1.2.31
Thank you everyone who are using Cacti and especially those helping to make Cacti better!
For additional details check out the README located on GitHub.
Project Updates
This...
Thank you everyone who are using Cacti and especially those helping to make Cacti better!
For additional details check out the README located on GitHub.
Project Updates
This...
🚨 CVE-2026-53914
In JetBrains Kotlin before 2.4.20 code execution was possible via unsafe deserialization in the build cache metadata
🎖@cveNotify
In JetBrains Kotlin before 2.4.20 code execution was possible via unsafe deserialization in the build cache metadata
🎖@cveNotify
JetBrains
Fixed security issues
This page contains information about resolved security issues, including description, severity, assigned CVEs, and the product versions in which they were resolved.
🚨 CVE-2026-45257
The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data.
An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system.
🎖@cveNotify
The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data.
An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system.
🎖@cveNotify
🚨 CVE-2026-9640
A privilege escalation vulnerability exists in LXD from 6.0 before 6.9, 5.21.0 before 5.21.5, and 5.0.0 before 5.0.7 regarding the handling of project-restriction policies during snapshot restoration.. An authenticated project operator in a restricted multi-tenant environment can bypass policy restrictions by importing a maliciously crafted instance backup containing restricted configuration keys within a snapshot. When the snapshot is restored, these restricted keys are applied to the live instance without policy validation. Starting the modified instance grants the operator unauthorized host root access.
🎖@cveNotify
A privilege escalation vulnerability exists in LXD from 6.0 before 6.9, 5.21.0 before 5.21.5, and 5.0.0 before 5.0.7 regarding the handling of project-restriction policies during snapshot restoration.. An authenticated project operator in a restricted multi-tenant environment can bypass policy restrictions by importing a maliciously crafted instance backup containing restricted configuration keys within a snapshot. When the snapshot is restored, these restricted keys are applied to the live instance without policy validation. Starting the modified instance grants the operator unauthorized host root access.
🎖@cveNotify
GitHub
Instance: Improve snapshot config validation during import by tomponline · Pull Request #18301 · canonical/lxd
Powerful system container and virtual machine manager - Instance: Improve snapshot config validation during import by tomponline · Pull Request #18301 · canonical/lxd
🚨 CVE-2026-13331
The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to generic SQL Injection via the 'search' parameter in all versions up to, and including, 4.5.5 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with marketer-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
🎖@cveNotify
The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to generic SQL Injection via the 'search' parameter in all versions up to, and including, 4.5.5 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with marketer-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
🎖@cveNotify
🚨 CVE-2026-12415
The Invoice Generator plugin for WordPress is vulnerable to privilege escalation due to a missing capability check on the pravel_invoice_edit_account() AJAX action in versions up to, and including, 1.0.0. The handler is exposed via wp_ajax_nopriv_pravel_invoice_edit_account, accepts an attacker-controlled user_id and user_email from POST data, and calls wp_update_user() without verifying authentication, ownership, or a nonce. This makes it possible for unauthenticated attackers to change the email address of any user, including administrators, and then trigger WordPress's password reset flow to gain access to the targeted account.
🎖@cveNotify
The Invoice Generator plugin for WordPress is vulnerable to privilege escalation due to a missing capability check on the pravel_invoice_edit_account() AJAX action in versions up to, and including, 1.0.0. The handler is exposed via wp_ajax_nopriv_pravel_invoice_edit_account, accepts an attacker-controlled user_id and user_email from POST data, and calls wp_update_user() without verifying authentication, ownership, or a nonce. This makes it possible for unauthenticated attackers to change the email address of any user, including administrators, and then trigger WordPress's password reset flow to gain access to the targeted account.
🎖@cveNotify
🚨 CVE-2026-12218
A vulnerability was detected in Yealink SIP-T46U 108.87.50.1. The affected element is the function StartReportInformation of the file /api/inner/beforewifitest of the component Web FastCGI Service. The manipulation of the argument port results in stack-based buffer overflow. Access to the local network is required for this attack. The exploit is now public and may be used. The vendor was contacted early about this disclosure and is working on a patch to fix it.
🎖@cveNotify
A vulnerability was detected in Yealink SIP-T46U 108.87.50.1. The affected element is the function StartReportInformation of the file /api/inner/beforewifitest of the component Web FastCGI Service. The manipulation of the argument port results in stack-based buffer overflow. Access to the local network is required for this attack. The exploit is now public and may be used. The vendor was contacted early about this disclosure and is working on a patch to fix it.
🎖@cveNotify
🚨 CVE-2026-12219
A flaw has been found in Yealink SIP-T46U 108.86.0.118. The impacted element is the function mod_diagnose.CommandShellByType of the file /api/diagnosis/start of the component Web FastCGI Service. This manipulation of the argument Time causes command injection. The attack can be initiated remotely. The exploit has been published and may be used. Upgrading to version 108.87.0.23 is sufficient to resolve this issue. It is advisable to upgrade the affected component.
🎖@cveNotify
A flaw has been found in Yealink SIP-T46U 108.86.0.118. The impacted element is the function mod_diagnose.CommandShellByType of the file /api/diagnosis/start of the component Web FastCGI Service. This manipulation of the argument Time causes command injection. The attack can be initiated remotely. The exploit has been published and may be used. Upgrading to version 108.87.0.23 is sufficient to resolve this issue. It is advisable to upgrade the affected component.
🎖@cveNotify
🚨 CVE-2026-12220
A vulnerability has been found in Yealink SIP-T46U 108.86.0.118. This affects the function mod_upgrade.SparePartsUpload of the file /api/upgrade/accupgradebychunk of the component Firmware Chunk Upload handler. Such manipulation of the argument uid leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure and is working on a patch to fix it.
🎖@cveNotify
A vulnerability has been found in Yealink SIP-T46U 108.86.0.118. This affects the function mod_upgrade.SparePartsUpload of the file /api/upgrade/accupgradebychunk of the component Firmware Chunk Upload handler. Such manipulation of the argument uid leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure and is working on a patch to fix it.
🎖@cveNotify
🚨 CVE-2026-12221
A vulnerability was found in Yealink SIP-T46U 108.86.0.118. This impacts the function sprintf of the file /api/upgrade/upgrade of the component Firmware Chunk Upload Handler. Performing a manipulation of the argument uid/start_offset results in stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been made public and could be used. The vendor was contacted early about this disclosure and is working on a patch to fix it.
🎖@cveNotify
A vulnerability was found in Yealink SIP-T46U 108.86.0.118. This impacts the function sprintf of the file /api/upgrade/upgrade of the component Firmware Chunk Upload Handler. Performing a manipulation of the argument uid/start_offset results in stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been made public and could be used. The vendor was contacted early about this disclosure and is working on a patch to fix it.
🎖@cveNotify
🚨 CVE-2026-12222
A vulnerability was determined in Yealink SIP-T46U 108.86.0.118. Affected is the function mod_webd.BlueToothTest of the file /api/inner/bttest of the component Web FastCGI Service. Executing a manipulation of the argument btMac/pin/reserved can lead to stack-based buffer overflow. The attack needs to be done within the local network. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure and is working on a patch to fix it.
🎖@cveNotify
A vulnerability was determined in Yealink SIP-T46U 108.86.0.118. Affected is the function mod_webd.BlueToothTest of the file /api/inner/bttest of the component Web FastCGI Service. Executing a manipulation of the argument btMac/pin/reserved can lead to stack-based buffer overflow. The attack needs to be done within the local network. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure and is working on a patch to fix it.
🎖@cveNotify
🚨 CVE-2026-12223
A vulnerability was identified in Yealink SIP-T46U 108.86.0.118. Affected by this vulnerability is the function mod_webd.TFTPUploadIperf of the file /api/inner/tftpuploadiperf of the component Web FastCGI Service. The manipulation of the argument ip/port leads to command injection. The attack needs to be initiated within the local network. The exploit is publicly available and might be used. Upgrading to version 108.87.0.23 addresses this issue. Upgrading the affected component is recommended. The vendor explains: "It has been fixed (...) for our technical support branch. However, please note that this specific support branch firmware is not publicly released yet."
🎖@cveNotify
A vulnerability was identified in Yealink SIP-T46U 108.86.0.118. Affected by this vulnerability is the function mod_webd.TFTPUploadIperf of the file /api/inner/tftpuploadiperf of the component Web FastCGI Service. The manipulation of the argument ip/port leads to command injection. The attack needs to be initiated within the local network. The exploit is publicly available and might be used. Upgrading to version 108.87.0.23 addresses this issue. Upgrading the affected component is recommended. The vendor explains: "It has been fixed (...) for our technical support branch. However, please note that this specific support branch firmware is not publicly released yet."
🎖@cveNotify
🚨 CVE-2025-60467
A use-after-free in the gf_filter_pid_inst_swap_delete_task function (/filter_core/filter_pid.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted media file.
🎖@cveNotify
A use-after-free in the gf_filter_pid_inst_swap_delete_task function (/filter_core/filter_pid.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted media file.
🎖@cveNotify
GitHub
Fixed #3286 · gpac/gpac@976dacf
GPAC Ultramedia OSS for Video Streaming & Next-Gen Multimedia Transcoding, Packaging & Delivery - Fixed #3286 · gpac/gpac@976dacf
🚨 CVE-2025-60474
A buffer overflow in the gf_media_import function (/media_tools/av_parsers.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input.
🎖@cveNotify
A buffer overflow in the gf_media_import function (/media_tools/av_parsers.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input.
🎖@cveNotify
GitHub
Fixed #3287 · gpac/gpac@bd7fd6b
GPAC Ultramedia OSS for Video Streaming & Next-Gen Multimedia Transcoding, Packaging & Delivery - Fixed #3287 · gpac/gpac@bd7fd6b
🚨 CVE-2025-60466
A use-after-free in the gf_filter_pid_get_packet function (/filter_core/filter_pid.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted media file.
🎖@cveNotify
A use-after-free in the gf_filter_pid_get_packet function (/filter_core/filter_pid.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted media file.
🎖@cveNotify
GitHub
Fixed #3284 · gpac/gpac@4a7ea06
GPAC Ultramedia OSS for Video Streaming & Next-Gen Multimedia Transcoding, Packaging & Delivery - Fixed #3284 · gpac/gpac@4a7ea06