🚨 CVE-2026-55958
Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected.

🎖@cveNotify

🚨 CVE-2026-55960
Un-negotiated Raw Public Key (RFC 7250) accepted in place of an X.509 certificate, bypassing chain validation. A raw public key has no chain, so ParseCertRelative() accepts it without performing any trust verification; it must therefore only be accepted when RPK was actually negotiated for that peer. The check now defaults the expected type to X.509 (per RFC 7250/8446) when no type was negotiated, comparing against the received server certificate type on the client and the selected client certificate type on the server, and rejects any mismatch, including an un-negotiated raw public key, with UNSUPPORTED_CERTIFICATE. Only affects builds with Raw Public Key support (HAVE_RPK) enabled - disabled by default in a standalone build, but included in --enable-all.

🎖@cveNotify

🚨 CVE-2026-55964
Chain intermediate CA:TRUE without keyCertSign accepted as a signing CA. Intermediate CA certificates are required to have the keyCertSign key usage when a Key Usage extension is present, but chain-supplied temporary CAs (WOLFSSL_TEMP_CA) added while building a certificate path were previously exempted from this check, so an intermediate asserting CA:TRUE but lacking keyCertSign was accepted as a signing CA. The check now applies to chain-supplied temporary CAs as well; only operator-loaded root certificates (WOLFSSL_USER_CA) and self-signed roots remain exempt. Per RFC 5280 an absent Key Usage extension implies all usages, so the requirement is enforced only when the extension is actually present (extKeyUsageSet). Affects the OpenSSL-compatibility certificate-path-building path (X509_verify_cert / X509_STORE, OPENSSL_EXTRA/OPENSSL_ALL), where untrusted chain intermediates are added as temporary CAs; native (non-OpenSSL-compat) certificate verification does not create temporary CAs and is unaffected. Within those builds, the check applies unless ALLOW_INVALID_CERTSIGN is defined.

🎖@cveNotify

🚨 CVE-2020-37256
Grav before 1.6.30 contains a cross-site scripting vulnerability in the Admin plugin page editor default security configuration. Privileged users with page editing capabilities can inject malicious scripts to execute arbitrary code and install malicious plugins for system access.

🎖@cveNotify

🚨 CVE-2021-47987
Parse Server before 4.10.0 was affected by a supply chain incident in which incorrect version tags were pushed to the official repository pointing to an unreviewed personal fork of a contributor with write access. No releases were published with these tags; a project was exposed only if it defined a git-based dependency referencing one of the affected tags (for example, parse-server#4.9.3). The code behind the tags was not reviewed or approved, and although no malicious code was identified, the introduction of security vulnerabilities could not be ruled out.

🎖@cveNotify

🚨 CVE-2025-71335
Flowise before 3.0.10 (affected versions 3.0.7 and earlier) fails to invalidate existing sessions and session tokens after a user changes their password. An attacker who already holds an active session, for example via a stolen session token or a device left logged in, remains authenticated as the legitimate user even after the user rotates their credentials, undermining the security purpose of the password change.

🎖@cveNotify

🚨 CVE-2026-40082
Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior have missing session_regenerate_id() after login, leading to Session Fixation. session_regenerate_id() is NOT called after successful login. The login flow at auth_login.php:203-207 directly sets $_SESSION[SESS_USER_ID] without rotating the session ID. The session cookie configuration is otherwise good (httponly=true, samesite=Strict, secure=true for HTTPS at include/global.php:513-537), but these do not prevent session fixation via same-site vectors. This issue has been fixed in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-49486
The Apache Airflow FTP provider's `FTPSHook.get_conn()` created an `ftplib.FTP_TLS` connection but never called `prot_p()`, so although the control channel was TLS-protected the data channel was transmitted in cleartext. Any deployment using `FTPSHook` or `FTPSFileTransmitOperator` to move files over FTPS exposed file contents and credentials-in-transit to a network attacker able to observe the data connection. Upgrade apache-airflow-providers-ftp to `3.15.1` or later, which issues `PROT P` to encrypt the data channel.

🎖@cveNotify

🚨 CVE-2026-13325
A flaw was found in KubeVirt's migration proxy. When spec.configuration.migrations.disableTLS is set to true on the KubeVirt custom resource, the target virt-handler binds a plain TCP listener on all interfaces (0.0.0.0/::) on a random port with no authentication, peer allow-list, or handshake token. This listener proxies directly into the target virt-launcher's virtqemud control socket. An attacker with a running pod on the cluster network can connect to this listener and issue unfiltered libvirt RPC commands against another tenant's virtual machine, including reading VM memory and configuration, modifying VM state via QMP, or destroying the VM. The bind address is unconditionally 0.0.0.0 — configuring a dedicated migration network via migrations.network only changes the advertised migration IP, not the listener bind address, so the port remains reachable on the pod network even when a dedicated migration network is configured. The API documentation describes disableTLS as removing "the additional layer of live migration encryption" without disclosing that it also removes all mutual authentication.

🎖@cveNotify

🚨 CVE-2026-57914
By sending a deeply nested ASN1 structure to a Apache Kerby client or service, it's possible to trigger a StackOverFlow Exception which can lead to denial of service issues. Users are recommended to upgrade to version 2.1.2, which fixes this issue.

🎖@cveNotify

🚨 CVE-2025-55017
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache IoTDB.

This issue affects Apache IoTDB: from 2.0.0 before 2.0.6, from 1.0.0 before 1.3.6.

Users are recommended to upgrade to version 1.3.6 and 2.0.6, which fixes the issue.

🎖@cveNotify

🚨 CVE-2025-64152
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache IoTDB.

This issue affects Apache IoTDB: from 1.0.0 before 1.3.6, from 2.0.0 before 2.0.7.

Users are recommended to upgrade to version 1.3.6 and 2.0.7, which fixes the issue.

🎖@cveNotify

🚨 CVE-2026-57915
It is possible to bypass the Kerberos pre-authentication check in Apache Kerby by sending a PA-DATA with an unrecognized or unsupported type. Users are recommended to upgrade to version 2.1.2, which fixes this issue.

🎖@cveNotify

🚨 CVE-2026-45256
When used to deliver a signal to a specific thread, thr_kill2(2) called p_cansignal() to determine whether the operation was permitted but did not check the result before delivering the signal. The signal was sent even when the permission check failed. The system call returned the resulting error to the caller, but by then the signal had already been delivered.

The missing check allows an unprivileged local user who knows or can guess a target's process and thread IDs to send any signal to a process they would not normally be permitted to signal, including processes owned by other users or by root. The same check enforces jail boundaries, so a jailed process can signal processes on the host or in other jails. Thread IDs are allocated globally and sequentially, and so can be discovered by brute force with no visibility into the target.

An attacker can stop or terminate arbitrary processes, including critical system daemons, resulting in a Denial of Service (DoS).

🎖@cveNotify

🚨 CVE-2026-45257
The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data.

An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system.

🎖@cveNotify

🚨 CVE-2026-47214
Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. Prior to 2.94.0, the HTML backend has unsafe URI and path handling. This vulnerability is fixed in 2.94.0.

🎖@cveNotify

🚨 CVE-2026-5757
Unauthenticated remote information disclosure vulnerability in Ollama's model quantization engine allows an attacker to read and exfiltrate the server's heap memory, potentially leading to sensitive data exposure, further compromise, and stealthy persistence.

🎖@cveNotify

🚨 CVE-2026-45405
Dokku is a docker-powered PaaS. Prior to 0.38.2, the git:from-archive and certs:add commands extract user-supplied tar/zip archives into temporary directories without sanitizing member paths or preventing symlink traversal. GNU tar creates symlinks during extraction and follows them for subsequent entries, allowing an attacker to write arbitrary files anywhere writable by the dokku user — including overwriting ~/.ssh/authorized_keys to gain unrestricted shell access. This vulnerability is fixed in 0.38.2.

🎖@cveNotify

🚨 CVE-2026-45407
Dokku is a docker-powered PaaS. Prior to 0.38.2, the git:auth command creates $DOKKU_ROOT/.netrc using bash's touch command, which applies the default umask of 0644. This pre-creation defeats the netrc binary's built-in 0600 permission setting, leaving git credentials readable by any local user who can traverse the dokku home directory. This vulnerability is fixed in 0.38.2.

🎖@cveNotify

🚨 CVE-2026-45408
Dokku is a docker-powered PaaS. Prior to 0.38.2, the app name validation regex (^[a-z0-9][^/:_A-Z]*$) permits shell metacharacters. When an authenticated user pushes to a git remote with a crafted app name, the name is embedded unquoted into a bash pre-receive hook script via an unquoted heredoc (<<EOF instead of <<'EOF') in fn-git-create-hook() at plugins/git/internal-functions:378. On git push, bash interprets the semicolon as a command separator, executing arbitrary commands as the dokku user. This vulnerability is fixed in 0.38.2.

🎖@cveNotify

🚨 CVE-2026-54636
Dokku is a docker-powered PaaS. Prior to 0.38.7, the cron plugin utilizes commands in the app.json file to manage system cron running as the Dokku user. An app.json cron command utilizing special shell characters - including, but not limited to, > or ; - can break out of the Docker container and execute commands on the host as the Dokku user. This vulnerability is fixed in 0.38.7.

🎖@cveNotify