🚨 CVE-2026-54448
Trivy is a security scanner. Prior to 0.71.0, when Trivy scans a Helm chart archive (.tgz), its custom tar unpacker reads each entry with io.ReadAll(tr) and no size limit. An attacker who can place a malicious .tgz file in the scanned path can craft a small compressed archive that decompresses to gigabytes, causing the Trivy process to be killed by the OS OOM killer. This vulnerability is fixed in 0.71.0.

🎖@cveNotify

🚨 CVE-2026-54573
Outline is a service that allows for collaborative documentation. Prior to 1.8.0, the AuthenticationHelper.canAccess function uses ctx.originalUrl to verify if an API key or OAuth token has the required scopes for a request. It extracts the resource by splitting the URL by / and taking the last segment. However, it fails to strip the URL fragment (#). Because Koa's router uses ctx.path (which strips the fragment) for routing, an attacker can append a fragment containing a permitted path (e.g., #foo/api/documents.info) to a restricted endpoint (e.g., /api/documents.create). The router will route the request to the restricted endpoint, but canAccess will evaluate the permitted path in the fragment, bypassing the API key scope restrictions and allowing privilege escalation. This vulnerability is fixed in 1.8.0.

🎖@cveNotify

🚨 CVE-2026-47770
jq is a command-line JSON processor. Prior to 1.8.2, comparing two sufficiently deeply nested arrays with the == operator exhausts the C stack on jq's ordinary command-line surface, resulting in denial of service via stack exhaustion (uncontrolled recursion). The crash occurs in jq's recursive structural comparison code, with the recursion repeating through jvp_array_equal() and jv_equal() in src/jv.c when comparing deeply nested arrays; a nearby sort comparator path through jv_cmp() in src/jv_aux.c overflows the stack at a larger nesting depth from the same missing recursion guard. Anyone running jq comparisons on attacker-controlled deeply nested JSON values, or embedding jq in a context where untrusted data can reach the == comparison path, is affected. This vulnerability is fixed in 1.8.2.

🎖@cveNotify

🚨 CVE-2026-49839
jq is a command-line JSON processor. Prior to 1.8.2,` jq --rawfile` can turn a handled oversized-string error into invalid-state reuse and a real heap out-of-bounds write in assertion-disabled builds. When jv_load_file(raw=1) reads an attacker-controlled file, it repeatedly appends file chunks to the same jv string accumulator. Once jv_string_append_buf() returns jv_invalid_with_msg("String too long"), the raw-file loop does not stop. If the file contains at least one more byte, the next loop iteration appends a new chunk to an object that is already invalid. With assertions enabled this aborts in jvp_string_ptr(). With assertions disabled, the invalid object is interpreted as a string object and ASan reports heap-buffer-overflow. This vulnerability is fixed in 1.8.2.

🎖@cveNotify

🚨 CVE-2026-50017
pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm can send user-level unscoped npm authentication credentials to a registry chosen by a repository-local .npmrc file. In the reproduced case, the user's npm config contains a default registry and an unscoped _authToken. The repository does not provide a token-bearing auth line. It only sets registry= to a different registry URL. During normal pnpm metadata/install workflows, pnpm binds the user-origin unscoped credential to the repository-selected registry and sends it as an Authorization header. This vulnerability is fixed in 10.34.0 and 11.4.0.

🎖@cveNotify

🚨 CVE-2026-54679
jq is a command-line JSON processor. Prior to 1.8.2, on 32bit system, jvp_string_append has a chance of integer/multiple overflowing and then causing a massive buffer overrun. This vulnerability is fixed in 1.8.2.

🎖@cveNotify

🚨 CVE-2026-46608
Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.5, the Glances XML-RPC server (glances -s) introduced a configurable CORS origin list in version 4.5.3 as a mitigation for CVE-2026-33533. However, the implementation silently falls back to Access-Control-Allow-Origin: * whenever cors_origins contains more than one entry. An operator who configures an explicit two-entry allowlist (e.g. two internal dashboard origins) intending to restrict browser access instead receives the unrestricted wildcard. A malicious web page served from any origin can issue a CORS simple request to /RPC2 and read the full system monitoring dataset without the victim's knowledge. This vulnerability is fixed in 4.5.5.

🎖@cveNotify

🚨 CVE-2026-54091
File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.6, File Browser's public share handlers rebase the share owner's filesystem root to the shared directory and then evaluate descendant paths against the owner's global and per-user rules using the rebased relative path instead of the original path relative to the owner's scope. As a result, an attacker who knows a public directory share URL can access files and subdirectories that the owner explicitly blocked with rules, as long as those blocked paths are located underneath the shared directory. In the simplest case this is an unauthenticated information disclosure through `GET /api/public/share/*` and `GET /api/public/dl/*`. This vulnerability is fixed in 2.63.6.

🎖@cveNotify

🚨 CVE-2026-54250
K3s is a fully conformant production-ready Kubernetes distribution. Prior to 1.35.3+k3s1, 1.34.6+k3s1, v1.33.10+k3s1, a path traversal vulnerability exists in K3s's etcd snapshot decompression functionality. Zip files containing archive members with maliciously crafted names can be written to arbitrary locations on the filesystem when an administrator restores the archive as a compressed etcd snapshot. This vulnerability is fixed in 1.35.3+k3s1, 1.34.6+k3s1, v1.33.10+k3s1.

🎖@cveNotify

🚨 CVE-2025-60464
A use-after-free in the gf_sei_load_from_state_internal function (/filters/sei_load.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MPEG-2 TS file.

🎖@cveNotify

🚨 CVE-2026-11310
X.509 trust-chain bypass in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra (OPENSSL_EXTRA) and whose application validates certificates by calling X509_verify_cert() with caller-supplied untrusted intermediate certificates; for those users it is critical, otherwise the library is unaffected. In particular, native wolfSSL TLS/DTLS usage is not impacted. wolfSSL's X509_verify_cert() temporarily loads each caller-supplied untrusted intermediate into the certificate manager but failed to drop them before the trusted-store check, so an untrusted intermediate could anchor the path itself. An attacker can present a chain that never reaches a configured trust anchor and have it accepted, resulting in acceptance of an attacker-controlled certificate. This is certificate verification independent of TLS (e.g. S/MIME/CMS, code/firmware signing, JWT/JWS x5c), is not specific to any key type or algorithm, and a single untrusted intermediate suffices. The default wolfSSL TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only TLS applications doing manual or deferred peer verification through this API are, which also requires --enable-sessioncerts.

🎖@cveNotify

🚨 CVE-2026-12340
Out-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key without checking that the key is at least that long. A public key shorter than 65 bytes results in an out-of-bounds heap read, leading to a potential crash (denial of service); there is no out-of-bounds write. Note this only affects builds with SM2 support (--enable-sm2 or --enable-all).

🎖@cveNotify

🚨 CVE-2026-55958
Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected.

🎖@cveNotify

🚨 CVE-2026-55960
Un-negotiated Raw Public Key (RFC 7250) accepted in place of an X.509 certificate, bypassing chain validation. A raw public key has no chain, so ParseCertRelative() accepts it without performing any trust verification; it must therefore only be accepted when RPK was actually negotiated for that peer. The check now defaults the expected type to X.509 (per RFC 7250/8446) when no type was negotiated, comparing against the received server certificate type on the client and the selected client certificate type on the server, and rejects any mismatch, including an un-negotiated raw public key, with UNSUPPORTED_CERTIFICATE. Only affects builds with Raw Public Key support (HAVE_RPK) enabled - disabled by default in a standalone build, but included in --enable-all.

🎖@cveNotify

🚨 CVE-2026-55964
Chain intermediate CA:TRUE without keyCertSign accepted as a signing CA. Intermediate CA certificates are required to have the keyCertSign key usage when a Key Usage extension is present, but chain-supplied temporary CAs (WOLFSSL_TEMP_CA) added while building a certificate path were previously exempted from this check, so an intermediate asserting CA:TRUE but lacking keyCertSign was accepted as a signing CA. The check now applies to chain-supplied temporary CAs as well; only operator-loaded root certificates (WOLFSSL_USER_CA) and self-signed roots remain exempt. Per RFC 5280 an absent Key Usage extension implies all usages, so the requirement is enforced only when the extension is actually present (extKeyUsageSet). Affects the OpenSSL-compatibility certificate-path-building path (X509_verify_cert / X509_STORE, OPENSSL_EXTRA/OPENSSL_ALL), where untrusted chain intermediates are added as temporary CAs; native (non-OpenSSL-compat) certificate verification does not create temporary CAs and is unaffected. Within those builds, the check applies unless ALLOW_INVALID_CERTSIGN is defined.

🎖@cveNotify

🚨 CVE-2020-37256
Grav before 1.6.30 contains a cross-site scripting vulnerability in the Admin plugin page editor default security configuration. Privileged users with page editing capabilities can inject malicious scripts to execute arbitrary code and install malicious plugins for system access.

🎖@cveNotify

🚨 CVE-2021-47987
Parse Server before 4.10.0 was affected by a supply chain incident in which incorrect version tags were pushed to the official repository pointing to an unreviewed personal fork of a contributor with write access. No releases were published with these tags; a project was exposed only if it defined a git-based dependency referencing one of the affected tags (for example, parse-server#4.9.3). The code behind the tags was not reviewed or approved, and although no malicious code was identified, the introduction of security vulnerabilities could not be ruled out.

🎖@cveNotify

🚨 CVE-2025-71335
Flowise before 3.0.10 (affected versions 3.0.7 and earlier) fails to invalidate existing sessions and session tokens after a user changes their password. An attacker who already holds an active session, for example via a stolen session token or a device left logged in, remains authenticated as the legitimate user even after the user rotates their credentials, undermining the security purpose of the password change.

🎖@cveNotify

🚨 CVE-2026-40082
Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior have missing session_regenerate_id() after login, leading to Session Fixation. session_regenerate_id() is NOT called after successful login. The login flow at auth_login.php:203-207 directly sets $_SESSION[SESS_USER_ID] without rotating the session ID. The session cookie configuration is otherwise good (httponly=true, samesite=Strict, secure=true for HTTPS at include/global.php:513-537), but these do not prevent session fixation via same-site vectors. This issue has been fixed in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-49486
The Apache Airflow FTP provider's `FTPSHook.get_conn()` created an `ftplib.FTP_TLS` connection but never called `prot_p()`, so although the control channel was TLS-protected the data channel was transmitted in cleartext. Any deployment using `FTPSHook` or `FTPSFileTransmitOperator` to move files over FTPS exposed file contents and credentials-in-transit to a network attacker able to observe the data connection. Upgrade apache-airflow-providers-ftp to `3.15.1` or later, which issues `PROT P` to encrypt the data channel.

🎖@cveNotify

🚨 CVE-2026-13325
A flaw was found in KubeVirt's migration proxy. When spec.configuration.migrations.disableTLS is set to true on the KubeVirt custom resource, the target virt-handler binds a plain TCP listener on all interfaces (0.0.0.0/::) on a random port with no authentication, peer allow-list, or handshake token. This listener proxies directly into the target virt-launcher's virtqemud control socket. An attacker with a running pod on the cluster network can connect to this listener and issue unfiltered libvirt RPC commands against another tenant's virtual machine, including reading VM memory and configuration, modifying VM state via QMP, or destroying the VM. The bind address is unconditionally 0.0.0.0 — configuring a dedicated migration network via migrations.network only changes the advertised migration IP, not the listener bind address, so the port remains reachable on the pod network even when a dedicated migration network is configured. The API documentation describes disableTLS as removing "the additional layer of live migration encryption" without disclosing that it also removes all mutual authentication.

🎖@cveNotify