🚨 CVE-2026-50189
Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, Appsmith's bundled supervisord exposes an XML-RPC interface on port 9001, reachable from outside the container via a Caddy reverse-proxy route at /supervisor/* on the public ingress. Combined with the APPSMITH_SUPERVISOR_PASSWORD exposed via GET /api/v1/admin/env, any authenticated administrator can send arbitrary XML-RPC calls to supervisord and execute OS commands inside the Docker container via twiddler.addProgramToGroup. This vulnerability is fixed in 2.1.

🎖@cveNotify

🚨 CVE-2026-53765
Chrome DevTools for agents (chrome-devtools-mcp) lets your coding agent control and inspect a live Chrome browser. From 0.20.0 until 1.1.0, The chrome-devtools-mcp daemon writes its PID file with fs.writeFileSync() to a deterministic runtime path. On typical macOS environments, and on Linux sessions where $XDG_RUNTIME_DIR is unset, that runtime path falls back to /tmp/chrome-devtools-mcp-<uid>/daemon.pid. Because the write does not use O_NOFOLLOW, a local low-privilege user on the same POSIX host can pre-create /tmp/chrome-devtools-mcp-<victim_uid>/daemon.pid as a symlink to a file writable by the victim. When the victim later starts daemon mode, fs.writeFileSync() follows the symlink and truncates the target file to the daemon PID string. This vulnerability is fixed in 1.1.0.

🎖@cveNotify

🚨 CVE-2026-53766
Chrome DevTools for agents (chrome-devtools-mcp) lets your coding agent control and inspect a live Chrome browser. From 0.24.0 until 1.1.0, McpContext.validatePath() enforces workspace roots by checking whether path.resolve(filePath) textually falls under one of the configured root paths. path.resolve() does not canonicalize symbolic links. As a result, a symlink inside a configured workspace root can point to a file outside that root, pass validation, and then be followed by downstream file read/write operations. This bypass applies even when the MCP client correctly declares the roots capability with a non-empty list. It is separate from the documented legacy behavior where missing roots capability allows all paths. The practical impact is a workspace-boundary bypass. In the write direction, filePath-writing tools can overwrite out-of-root files through an in-root symlink. In the read direction, upload_file can read through the symlink and send the file to the currently selected web page. This vulnerability is fixed in 1.1.0.

🎖@cveNotify

🚨 CVE-2026-54070
SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, renderPackageREADME in kernel/bazaar/readme.go renders a Bazaar package README from Markdown to HTML with the lute engine and SetSanitize(true). The lute sanitizer is an event-handler blocklist: allowAttr rejects only attribute names present in a fixed eventAttrs map copied from the w3schools legacy handler list. That map omits modern event handlers. onpointerover, onpointerdown, onauxclick, onbeforetoggle, onfocusin, onanimationstart, and ontransitionend are not in the list, so the sanitizer passes them through verbatim on any tag. The frontend assigns the rendered HTML to mdElement.innerHTML in app/src/config/bazaar.ts with no client-side DOMPurify on this path, into a normal element in the main document (no iframe, no sandbox). The kernel sends no Content-Security-Policy, X-Frame-Options, or X-Content-Type-Options header on any response, so an inline handler runs when its event fires. The README is rendered when an Administrator opens a package in Settings → Marketplace, after the one-time marketplace trust consent. Install is not required. Result: a third-party Bazaar package author runs JavaScript in the Administrator's authenticated SiYuan origin when the Administrator views and interacts with the package listing, and gains full control of the workspace. This vulnerability is fixed in 3.7.0.

🎖@cveNotify

🚨 CVE-2026-55454
Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, the bundled Caddy reverse-proxy's admin API — which has no authentication by default — is bound on 0.0.0.0:2019 inside the container. While this listener is not directly published to the host by docker-compose.yml, it is reachable from the Appsmith server process itself or a SSRF vulnerability. An authenticated low-privileged user can therefore drive the SSRF to issue POST /load (or any other admin-API call) against http://0.0.0.0:2019/, fully replacing the live Caddy configuration and taking over the reverse proxy. This vulnerability is fixed in 2.1.

🎖@cveNotify

🚨 CVE-2026-39951
Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior have a Stored SQL Injection vulnerability through graph_name_regexp in the Reports feature. This issue has been fixed in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-13311
shell-quote prior to 1.8.5 finalizes parsed tokens in parse() using Array.prototype.concat as a reduce accumulator, which reallocates and copies the entire growing array on every iteration. As a result parse() runs in O(n^2) time relative to the number of input tokens. An attacker who can supply an attacker-controlled string to any code path that calls parse() (no shell metacharacters are required; plain space-separated words suffice) can block the single-threaded Node.js event loop for an extended period with a small input, resulting in a denial of service. There is no code execution or data disclosure; impact is to availability only. Fixed in 1.8.5.

🎖@cveNotify

🚨 CVE-2026-41120
Dell Wyse Management Suite, versions prior to WMS 5.5 HF1, contain an Acceptance of Extraneous Untrusted Data With Trusted Data vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution.

🎖@cveNotify

🚨 CVE-2026-49506
Dell Wyse Management Suite, versions prior to WMS 5.5 HF1, contain an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution.

🎖@cveNotify

🚨 CVE-2026-57234
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, the NONET parse option, which Nokogiri turns on by default for Nokogiri::XML::Schema (see CVE-2020-26247), was not correctly enforced on the JRuby implementation. As a result, a schema parsed with default options could still cause external resources to be fetched over the network, potentially enabling SSRF or XXE attacks. This vulnerability is fixed in 1.19.4.

🎖@cveNotify

🚨 CVE-2026-54036
LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.4-rc1, the GET /api/auth/2fa/enable endpoint can be called by an authenticated user (or attacker with a stolen session) even when 2FA is already fully enabled on the account. This endpoint overwrites the existing TOTP secret, generates new backup codes, and sets twoFactorEnabled to false — all without requiring any TOTP or backup code verification. An attacker with a valid session token can completely take over a victim's 2FA, locking the legitimate user out of their own two-factor authentication. This vulnerability is fixed in 0.8.4-rc1.

🎖@cveNotify

🚨 CVE-2026-55892
Vim is an open source, command line text editor. Prior to 9.2.0662, the dump_prefixes() function in src/spell.c walks a spell-file prefix trie iteratively with a depth counter while dumping the prefixes that apply to a word. The counter is bounded only by the trie structure itself; it is never checked against the size of the fixed MAXWLEN-element stack arrays it indexes (prefix[], arridx[], curi[]). A crafted .spl file, loaded when the user dumps the word list, can drive the descent arbitrarily deep, so the function writes past the end of those arrays. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0662.

🎖@cveNotify

🚨 CVE-2026-57454
Vim is an open source, command line text editor. From 9.2.0320 until 9.2.0679, a crafted undo or swap file can store a virtual-text property whose offset and length point outside the line's property data. When Vim restores or displays such a line it converts the offset into a pointer and reads the virtual text without bounds checking, causing an out-of-bounds read that can crash Vim or disclose adjacent heap memory. This vulnerability is fixed in 9.2.0679.

🎖@cveNotify

🚨 CVE-2026-54027
LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.4-rc1, the POST /api/files/images endpoint allows any authenticated user to upload files into any agent's tool_resources (e.g., context, execute_code) without verifying ownership or EDIT permission on the target agent. A permission check was added to the POST /api/files route in a previous patch, but the image upload route was never updated with the same check. An attacker can simply use the image endpoint instead of the file endpoint to bypass the authorization entirely. This vulnerability is fixed in 0.8.4-rc1.

🎖@cveNotify

🚨 CVE-2026-54029
LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.4-rc1, the DELETE /api/messages/:conversationId/:messageId endpoint allows any authenticated user to delete any other user's messages. The validateMessageReq middleware only validates that the conversationId belongs to the requesting user, but the handler calls deleteMessages({ messageId }) using only the messageId as the MongoDB filter — without adding a user constraint. An attacker provides their own valid conversationId (to pass validation) and the victim's messageId (to target deletion), resulting in permanent, irrecoverable message deletion. This vulnerability is fixed in 0.8.4-rc1.

🎖@cveNotify

🚨 CVE-2026-54448
Trivy is a security scanner. Prior to 0.71.0, when Trivy scans a Helm chart archive (.tgz), its custom tar unpacker reads each entry with io.ReadAll(tr) and no size limit. An attacker who can place a malicious .tgz file in the scanned path can craft a small compressed archive that decompresses to gigabytes, causing the Trivy process to be killed by the OS OOM killer. This vulnerability is fixed in 0.71.0.

🎖@cveNotify

🚨 CVE-2026-54573
Outline is a service that allows for collaborative documentation. Prior to 1.8.0, the AuthenticationHelper.canAccess function uses ctx.originalUrl to verify if an API key or OAuth token has the required scopes for a request. It extracts the resource by splitting the URL by / and taking the last segment. However, it fails to strip the URL fragment (#). Because Koa's router uses ctx.path (which strips the fragment) for routing, an attacker can append a fragment containing a permitted path (e.g., #foo/api/documents.info) to a restricted endpoint (e.g., /api/documents.create). The router will route the request to the restricted endpoint, but canAccess will evaluate the permitted path in the fragment, bypassing the API key scope restrictions and allowing privilege escalation. This vulnerability is fixed in 1.8.0.

🎖@cveNotify

🚨 CVE-2026-47770
jq is a command-line JSON processor. Prior to 1.8.2, comparing two sufficiently deeply nested arrays with the == operator exhausts the C stack on jq's ordinary command-line surface, resulting in denial of service via stack exhaustion (uncontrolled recursion). The crash occurs in jq's recursive structural comparison code, with the recursion repeating through jvp_array_equal() and jv_equal() in src/jv.c when comparing deeply nested arrays; a nearby sort comparator path through jv_cmp() in src/jv_aux.c overflows the stack at a larger nesting depth from the same missing recursion guard. Anyone running jq comparisons on attacker-controlled deeply nested JSON values, or embedding jq in a context where untrusted data can reach the == comparison path, is affected. This vulnerability is fixed in 1.8.2.

🎖@cveNotify

🚨 CVE-2026-49839
jq is a command-line JSON processor. Prior to 1.8.2,` jq --rawfile` can turn a handled oversized-string error into invalid-state reuse and a real heap out-of-bounds write in assertion-disabled builds. When jv_load_file(raw=1) reads an attacker-controlled file, it repeatedly appends file chunks to the same jv string accumulator. Once jv_string_append_buf() returns jv_invalid_with_msg("String too long"), the raw-file loop does not stop. If the file contains at least one more byte, the next loop iteration appends a new chunk to an object that is already invalid. With assertions enabled this aborts in jvp_string_ptr(). With assertions disabled, the invalid object is interpreted as a string object and ASan reports heap-buffer-overflow. This vulnerability is fixed in 1.8.2.

🎖@cveNotify

🚨 CVE-2026-50017
pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm can send user-level unscoped npm authentication credentials to a registry chosen by a repository-local .npmrc file. In the reproduced case, the user's npm config contains a default registry and an unscoped _authToken. The repository does not provide a token-bearing auth line. It only sets registry= to a different registry URL. During normal pnpm metadata/install workflows, pnpm binds the user-origin unscoped credential to the repository-selected registry and sends it as an Authorization header. This vulnerability is fixed in 10.34.0 and 11.4.0.

🎖@cveNotify

🚨 CVE-2026-54679
jq is a command-line JSON processor. Prior to 1.8.2, on 32bit system, jvp_string_append has a chance of integer/multiple overflowing and then causing a massive buffer overrun. This vulnerability is fixed in 1.8.2.

🎖@cveNotify