🚨 CVE-2026-43499
In the Linux kernel, the following vulnerability has been resolved:

rtmutex: Use waiter::task instead of current in remove_waiter()

remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().

In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:

1) the rbtree dequeue happens without waiter::task::pi_lock being held

2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.

3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task

Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.

[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ]

🎖@cveNotify

🚨 CVE-2026-43501
In the Linux kernel, the following vulnerability has been resolved:

ipv6: rpl: reserve mac_len headroom when recompressed SRH grows

ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).

pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:

skb_set_mac_header(skb, -skb->mac_len);

will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.

A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.

Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards.

🎖@cveNotify

🚨 CVE-2026-43502
In the Linux kernel, the following vulnerability has been resolved:

net/rds: handle zerocopy send cleanup before the message is queued

A zerocopy send can fail after user pages have been pinned but before
the message is attached to the sending socket.

The purge path currently infers zerocopy state from rm->m_rs, so an
unqueued message can be cleaned up as if it owned normal payload pages.
However, zerocopy ownership is really determined by the presence of
op_mmp_znotifier, regardless of whether the message has reached the
socket queue.

Capture op_mmp_znotifier up front in rds_message_purge() and use it as
the cleanup discriminator. If the message is already associated with a
socket, keep the existing completion path. Otherwise, drop the pinned
page accounting directly and release the notifier before putting the
payload pages.

This keeps early send failure cleanup consistent with the zerocopy
lifetime rules without changing the normal queued completion path.

🎖@cveNotify

🚨 CVE-2026-49401
Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.7.14, Deno's permission system enforces filesystem and execution restrictions by comparing the requested path against the path supplied to --deny-read, --deny-write, --deny-run, or --deny-ffi. On macOS, that comparison was done at the raw-byte level while the APFS filesystem treats different Unicode spellings of the same name as the same file. That means a program could reach a denied path by spelling it differently than the deny rule. This vulnerability is fixed in 2.7.14.

🎖@cveNotify

🚨 CVE-2026-49402
Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.7.10, Deno's node:child_process implementation provided an escapeShellArg() helper used when callers passed shell: true to spawn / spawnSync / exec and friends. On Windows, the helper failed to quote arguments that contained cmd.exe metacharacters and did not neutralize % (which cmd.exe expands even inside double-quoted strings). An attacker who controlled any portion of an argument passed to such a call could inject arbitrary additional commands into the spawned cmd.exe invocation. This vulnerability is fixed in 2.7.10.

🎖@cveNotify

🚨 CVE-2026-49406
Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.7.12, when Deno was run in BYONM mode (nodeModulesDir: "manual"), the module resolver did not validate that a package's resolved entrypoint stayed within its node_modules/<pkg>/ directory. A malicious package.json whose main field contained .. segments was able to resolve to an arbitrary path on disk, and the resolver then read that file without consulting the --allow-read allowlist. This let a require("evil-pkg") call return the contents of a file that a direct Deno.readTextFileSync(...) call would have been blocked from reading. This vulnerability is fixed in 2.7.12.

🎖@cveNotify

🚨 CVE-2026-49411
Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.8.0, the Node.js compatibility TCP path checked the permission against the original hostname string before resolution and then did not re-check after resolution. A caller could therefore pass a numeric alias of an IP address (for example the decimal integer 2130706433 or the hex form 0x7f000001, both of which resolve to 127.0.0.1) and reach the denied destination through node:net.connect or node:http.request's { host, port } options form. This vulnerability is fixed in 2.8.0.

🎖@cveNotify

🚨 CVE-2026-48940
A Joomla user with K2 "create item" rights (Author tier by default) can submit an article whose `embedVideo` POST field contains a raw `<script>` tag; K2 stores it verbatim and renders it unescaped to any visitor of the article page.

🎖@cveNotify

🚨 CVE-2026-48941
The K2 frontend `item.checkin` task accepts an unauthenticated `sigProFolder` query parameter and uses it directly to address a `JFolder::delete()` call under `/media/k2/galleries/`

🎖@cveNotify

🚨 CVE-2026-48942
K2 ≤ 2.26 renders the `#__k2_users.image` column directly into HTML `src` attributes via two distinct templates, in both cases without HTML escaping.

🎖@cveNotify

🚨 CVE-2026-48943
K2 ≤ 2.24 contains a mass-assignment defect in the K2 system user plugin `plg_user_k2`. A Registered Joomla user, by including the field `K2UserForm=1` in a standard `com_users` `profile.save` POST, can write arbitrary values into the `notes`, `image`, and `plugins` columns of their own row in the `#__k2_users` table — none of which are exposed by the K2 frontend profile-edit form.

🎖@cveNotify

🚨 CVE-2026-48944
The K2 frontend article-save handler accepts an `attachment[N][existing]` POST field that is concatenated with `JPATH_SITE/` and passed to `JFile::copy()`. `JPath::clean` does NOT strip `..`, and there is no allow-list of source paths. An Author can therefore copy `configuration.php` (or any other file readable by the web user — including `../../../etc/passwd`) into `/media/k2/attachments/`, then retrieve the contents via the K2 attachment-download endpoint.

🎖@cveNotify

🚨 CVE-2026-48945
The K2 article gallery upload path accepts a zip/tar archive, extracts it under `/media/k2/galleries/<id>/`, and only renames image files (gif/jpg/jpeg/png/webp) to safe names — non-image files (including `.php`) are extracted as-is and remain executable via direct HTTP access.

🎖@cveNotify

🚨 CVE-2026-57518
Pagekit CMS 1.0.18 contains a privilege escalation vulnerability that allows authenticated users with the 'user: manage users' permission to escalate privileges by assigning arbitrary custom roles to themselves due to missing authorization checks in UserApiController::saveAction(). Attackers can assign themselves a custom role with the 'system: manage packages' permission and then upload and install a malicious PHP package through the admin package installer to achieve remote code execution.

🎖@cveNotify

🚨 CVE-2020-9711
Acrobat Reader versions 2020.009.20074, 2020.001.30002, 2017.011.30171, 2015.006.30523 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

🎖@cveNotify

🚨 CVE-2020-9713
Adobe Acrobat and Reader versions 2020.009.20074 and earlier, 2020.001.30002, 2017.011.30171 and earlier, and 2015.006.30523 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

🎖@cveNotify

🚨 CVE-2025-71382
MuPDF before 1.27.0-rc1 contains an uncontrolled recursion vulnerability in the EPUB CSS rendering engine that allows remote attackers to cause a denial of service by supplying a maliciously crafted EPUB file with deeply nested HTML elements and inline CSS styles. The function value_from_inheritable_property() in css-apply.c recurses through the CSS property inheritance chain without a depth limit, exhausting the process stack and causing a crash in any application using MuPDF for EPUB rendering.

🎖@cveNotify

🚨 CVE-2026-44726
Deno is a JavaScript, TypeScript, and WebAssembly runtime. From 2.0.0 until 2.7.8, a flaw in Deno's Node.js tls compatibility layer could cause a TLS client to transmit application data in plaintext after a connection retry. When `autoSelectFamily was enabled and the first address-family attempt failed, the socket reinitialization path reused a stale TLS upgrade hook that was bound to the original, failed handle. As a result, the replacement TCP connection was never upgraded to TLS, and any data the application wrote before the secureConnect event travelled over the network unencrypted. A network attacker positioned to cause the initial connection attempt to fail (for example, by dropping IPv6 traffic on a dual-stack host) could deterministically trigger the fallback path and observe or tamper with traffic that the application believed was TLS-protected. This vulnerability is fixed in 2.7.8.

🎖@cveNotify

🚨 CVE-2026-45135
Caddy is an extensible server platform that uses TLS by default. From 2.7.0 until 2.11.3, the FastCGI transport's splitPos() in modules/caddyhttp/reverseproxy/fastcgi/fastcgi.go misuses golang.org/x/text/search with search.IgnoreCase when the request path contains a non-ASCII byte. Two distinct flaws in that fallback let an attacker mislead Caddy's FastCGI splitting into treating a non-.php (or other configured split_path extension) file as a script. In any deployment where the attacker can place content into a file served via FastCGI (uploads, file storage, etc.), this can be escalated to remote code execution by crafting a URL whose path triggers either flaw. This vulnerability is fixed in 2.11.3.

🎖@cveNotify

🚨 CVE-2026-45692
Caddy is an extensible server platform that uses TLS by default. From 2.4.0 until 2.11.3, the authorization layer and the /config traversal layer do not agree on what object the path refers to. In this case, a path authorized for one config object is accepted, but then resolves to a different config object during traversal. This happens because the authorization layer uses string prefix matching and the /config traversal layer parses array indices numerically using strconv.Atoi(). This vulnerability is fixed in 2.11.3.

🎖@cveNotify

🚨 CVE-2026-5309
GitLab has remediated an issue in GitLab EE affecting all versions from 18.6 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an authenticated user to read or modify another group's virtual registry cleanup policy settings without authorization.

🎖@cveNotify