🚨 CVE-2026-21734
A web page that contains unusual GPU shader code is loaded into the GPU compiler process and can trigger a write out-of-bounds write crash in the GPU shader compiler library. On certain platforms, when the compiler process has system privileges this could enable further exploits on the device.



An edge case using a very small value in GPU shader code can cause a segmentation fault in the GPU shader compiler due to am out-of-bounds write.

🎖@cveNotify

🚨 CVE-2026-44018
Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.45.0 until 2.91.0, the METS-GBS backend's XML parsing and the input document format detection lacked security controls. An attacker could craft malicious METS-GBS archives that, when processed, could read sensitive files, exhaust system resources, or cause application crashes. This vulnerability is fixed in 2.91.0.

🎖@cveNotify

🚨 CVE-2026-45195
Kernel software installed and running inside a Host VM may post improper commands to the GPU Firmware to trigger a memory read or write outside the permitted range of memory for the host kernel.



Addresses passed to the GPU Firmware can be used by the Firmware for more privileged memory accesses than are permitted by the system.

🎖@cveNotify

🚨 CVE-2026-47214
Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. Prior to 2.94.0, the HTML backend has unsafe URI and path handling. This vulnerability is fixed in 2.94.0.

🎖@cveNotify

🚨 CVE-2026-5757
Unauthenticated remote information disclosure vulnerability in Ollama's model quantization engine allows an attacker to read and exfiltrate the server's heap memory, potentially leading to sensitive data exposure, further compromise, and stealthy persistence.

🎖@cveNotify

🚨 CVE-2026-9639
Nil-pointer dereference in CreateCustomVolumeFromBackup in LXD up to version 6.8 and 5.21 on Linux allows an authenticated user with can_create_storage_volumes permissions to cause a denial of service via a specially crafted custom-volume backup tarball that omits the expires_at snapshot field.

🎖@cveNotify

🚨 CVE-2026-9640
A privilege escalation vulnerability exists in LXD from 6.0 before 6.9, 5.21.0 before 5.21.5, and 5.0.0 before 5.0.7 regarding the handling of project-restriction policies during snapshot restoration.. An authenticated project operator in a restricted multi-tenant environment can bypass policy restrictions by importing a maliciously crafted instance backup containing restricted configuration keys within a snapshot. When the snapshot is restored, these restricted keys are applied to the live instance without policy validation. Starting the modified instance grants the operator unauthorized host root access.

🎖@cveNotify

🚨 CVE-2025-6965
There exists a vulnerability in SQLite versions before 3.50.2 where the number of aggregate terms could exceed the number of columns available. This could lead to a memory corruption issue. We recommend upgrading to version 3.50.2 or above.

🎖@cveNotify

🚨 CVE-2026-8823
Mattermost versions 11.7.x <= 11.7.0, 10.11.x <= 10.11.17 fail to validate bot targets when demoting users to guests which allows a lower-privileged administrator to degrade arbitrary bot accounts via the standard demote-user API.. Mattermost Advisory ID: MMSA-2026-00669

🎖@cveNotify

🚨 CVE-2026-53622
Traefik is an HTTP reverse proxy and load balancer. Prior to 3.7.3, there is a critical vulnerability in Traefik's HTTP/3 (QUIC) TLS configuration selection that allows unauthenticated clients to bypass router-specific mTLS enforcement. When HTTP/3 is enabled on an entrypoint, the TLS handshake selects the applicable TLS configuration through an exact, case-sensitive lookup on the SNI value, which fails to match wildcard host patterns (e.g., *.example.com) or case variants of the configured hostname. Because the handshake falls back to the default TLS configuration — which may not require client certificates — a client can complete the QUIC handshake without presenting a certificate, while the subsequent HTTP routing layer still dispatches the request to a backend protected by a router-specific mTLS policy. The issue affects deployments where HTTP/3 is enabled, a router uses a wildcard Host rule or case-insensitive hostname matching, a router-specific TLSOptions enforces client certificate authentication, and UDP access to the entrypoint is reachable by an attacker. This vulnerability is fixed in 3.7.3.

🎖@cveNotify

🚨 CVE-2026-54761
Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.21 and 3.7.5, there is a high severity vulnerability in Traefik's Kubernetes Gateway provider affecting the crossProviderNamespaces allowlist. For HTTPRoute rules that declare multiple (WRR) backendRefs, Traefik evaluates the allowlist against the target backendRef.namespace instead of the route's own namespace. As a result, an HTTPRoute created in a namespace that is not allow-listed can reference a cross-provider TraefikService such as api@internal, dashboard@internal or rest@internal by pointing backendRef.namespace at an allow-listed namespace covered by a Gateway API ReferenceGrant, exposing internal Traefik services on the data plane. Exploitation requires the ability to create an accepted HTTPRoute and a matching ReferenceGrant from an allow-listed namespace; it does not require any change to Traefik static configuration, RBAC, or the deployment itself. This vulnerability is fixed in 3.6.21 and 3.7.5.

🎖@cveNotify

🚨 CVE-2026-54762
Traefik is an HTTP reverse proxy and load balancer. From 3.7.0-ea.1 until 3.7.5, there is a medium severity vulnerability in Traefik's Kubernetes Ingress NGINX provider that causes affected routes to fail open. When an Ingress explicitly enables BasicAuth or DigestAuth through the supported nginx.ingress.kubernetes.io/auth-type and auth-secret annotations, but the referenced auth Secret cannot be resolved or parsed, Traefik logs the resolution error, skips installing the authentication middleware, and still emits a router to the backend service. A route that operators intended to protect is therefore published to the data plane without its authentication control, allowing unauthenticated access to the backend. The trigger is an invalid or unresolved auth dependency — a missing, malformed, unreadable, or policy-denied Secret — rather than an intentionally unprotected route. This vulnerability is fixed in 3.7.5.

🎖@cveNotify

🚨 CVE-2026-57436
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::Document#root= validated only that the new root was a Nokogiri::XML::Node, allowing a DTD node to be set as the document root. The result is a heap use-after-free during garbage collection or finalization, leading to an invalid memory read or potentially a segfault. This vulnerability is fixed in 1.19.4.

🎖@cveNotify

🚨 CVE-2026-57437
Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::XPathContext did not keep its source document alive for garbage collection. If an XPathContext outlived its document and the document was collected, evaluating an XPath expression could read invalid memory and potentially segfault. This is only reachable when application code constructs an XPathContext directly and lets the document become unreachable while continuing to use the context. The normal Document#xpath, #css, and related search methods are not affected, and it is not triggerable by malicious document input. This vulnerability is fixed in 1.19.4.

🎖@cveNotify

🚨 CVE-2026-57587
A SQL injection vulnerability in Nessus allows a remote, unauthenticated attacker who controls reverse DNS records for a scanned host to inject malicious SQL into the scan results database, potentially enabling exfiltration of scan-result data.

🎖@cveNotify

🚨 CVE-2026-57588
A SQL injection vulnerability in Nessus allows an attacker to craft a malicious scan result file that, when imported by a privileged user, injects malicious SQL into the scan results database, potentially enabling exfiltration of scan-result data.

🎖@cveNotify

🚨 CVE-2026-56123
socat versions 1.8.0.0 through 1.8.1.1 contain a heap-based buffer overflow vulnerability that allows a malicious SOCKS5 proxy server to overwrite adjacent heap memory by exploiting a sign-extension flaw in the DOMAINNAME reply parser. During connection setup, the domain name length byte is read through a signed char field causing a negative bytes_to_read value that is implicitly converted to size_t, resulting in an unbounded heap write into the 262-byte reply buffer with attacker-controlled size and content.

🎖@cveNotify

🚨 CVE-2026-11999
X.509 trust-chain bypass (path-depth exhaustion) in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra whose application calls X509_verify_cert() with caller-supplied untrusted intermediates; for those users it is critical, otherwise the library is unaffected. Native wolfSSL TLS/DTLS usage is not impacted. X509_verify_cert() returned success based only on the last verified link rather than on reaching a trust anchor: when the supplied chain is deeper than the verifier's maximum path depth (default 100), path building runs out of depth while still walking untrusted intermediates and the chain is accepted even though it never reaches a configured trust anchor, allowing acceptance of an attacker-controlled certificate. The default TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only applications doing manual or deferred verification through this API are.

🎖@cveNotify

🚨 CVE-2026-55961
wolfSSL_PKCS7_verify() returning success for a degenerate (certs-only) PKCS#7 object that contains no signer. Such an object has empty signerInfos, so the underlying signed-data verification succeeds without authenticating any content. The compatibility-layer verify path now rejects the object when no signer signature has actually been verified, so a PKCS#7 carrying no valid signature is no longer reported as verified. This is enforced regardless of the PKCS7_NOVERIFY flag, which only suppresses signer certificate chain validation and was never intended to waive the requirement that a signature exist. Only affects OpenSSL compatibility builds that call the PKCS7_verify() compatibility API on potentially degenerate PKCS#7 bundles.

🎖@cveNotify

🚨 CVE-2026-55967
AES-GCM encryption/decryption with extremely large cumulative single message sizes (>64 GiB) were not properly rejected by the streaming APIs, allowing counter wrap, keystream reuse, and consequent plaintext recovery.

🎖@cveNotify

🚨 CVE-2026-6091
Partial-chain certificate verification may accept chains that terminate at a peer-supplied, untrusted intermediate certificate rather than a trusted anchor. An attacker could present a chain that ends at an intermediate they control and have it accepted as valid. This affects the OpenSSL compatibility certificate-path-building path (wolfSSL_X509_verify_cert / X509_STORE, OPENSSL_EXTRA) when the X509_V_FLAG_PARTIAL_CHAIN verify flag is enabled.

🎖@cveNotify