🚨 CVE-2026-7531
Use-after-free in PQC hybrid key-share handling. This is an incomplete-fix follow-up to CVE-2026-5460 (released in 5.9.1): a malicious TLS 1.3 server sending a truncated PQC hybrid KeyShare can still trigger the error cleanup path to operate on freed memory.

🎖@cveNotify

🚨 CVE-2026-45846
In the Linux kernel, the following vulnerability has been resolved:

bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()

bareudp_fill_metadata_dst() passes bareudp->sock to
udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.
The socket is only created in bareudp_open() and NULLed in
bareudp_stop(), so calling this function while the device is down
triggers a NULL dereference via sock->sk.

BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160)
Call Trace:
<TASK>
bareudp_fill_metadata_dst (drivers/net/bareudp.c:532)
do_execute_actions (net/openvswitch/actions.c:901)
ovs_execute_actions (net/openvswitch/actions.c:1589)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:700)
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1209)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>

Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths
in the same driver.

🎖@cveNotify

🚨 CVE-2025-71303
In the Linux kernel, the following vulnerability has been resolved:

accel/amdxdna: Fix race condition when checking rpm_on

When autosuspend is triggered, driver rpm_on flag is set to indicate that
a suspend/resume is already in progress. However, when a userspace
application submits a command during this narrow window,
amdxdna_pm_resume_get() may incorrectly skip the resume operation because
the rpm_on flag is still set. This results in commands being submitted
while the device has not actually resumed, causing unexpected behavior.

The set_dpm() is called by suspend/resume, it relied on rpm_on flag to
avoid calling into rpm suspend/resume recursivly. So to fix this, remove
the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm()
which explicitly resumes the device before invoking set_dpm(). With this
change, set_dpm() is called directly inside the suspend or resume execution
path. Otherwise, aie2_pm_set_dpm() is called.

🎖@cveNotify

🚨 CVE-2025-71304
In the Linux kernel, the following vulnerability has been resolved:

smack: /smack/doi: accept previously used values

Writing to /smack/doi a value that has ever been
written there in the past disables networking for
non-ambient labels.
E.g.

# cat /smack/doi
3
# netlabelctl -p cipso list
Configured CIPSO mappings (1)
DOI value : 3
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (3)
domain: "_" (IPv4)
protocol: UNLABELED
domain: DEFAULT (IPv4)
protocol: CIPSO, DOI = 3
domain: DEFAULT (IPv6)
protocol: UNLABELED

# cat /smack/ambient
_
# cat /proc/$$/attr/smack/current
_
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms
# echo foo >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms
unknown option 86

# echo 4 >/smack/doi
# echo 3 >/smack/doi
!> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17
# echo 3 >/smack/doi
!> [ 249.402261] smk_cipso_doi:678 remove rc = -2
!> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17

# ping -c1 10.1.95.12
!!> ping: 10.1.95.12: Address family for hostname not supported

# echo _ >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms

This happens because Smack keeps decommissioned DOIs,
fails to re-add them, and consequently refuses to add
the “default” domain map:

# netlabelctl -p cipso list
Configured CIPSO mappings (2)
DOI value : 3
mapping type : PASS_THROUGH
DOI value : 4
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (2)
domain: "_" (IPv4)
protocol: UNLABELED
!> (no ipv4 map for default domain here)
domain: DEFAULT (IPv6)
protocol: UNLABELED

Fix by clearing decommissioned DOI definitions and
serializing concurrent DOI updates with a new lock.

Also:
- allow /smack/doi to live unconfigured, since
adding a map (netlbl_cfg_cipsov4_map_add) may fail.
CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI
- add new DOI before removing the old default map,
so the old map remains if the add fails

(2008-02-04, Casey Schaufler)

🎖@cveNotify

🚨 CVE-2025-71305
In the Linux kernel, the following vulnerability has been resolved:

drm/display/dp_mst: Add protection against 0 vcpi

When releasing a timeslot there is a slight chance we may end up
with the wrong payload mask due to overflow if the delayed_destroy_work
ends up coming into play after a DP 2.1 monitor gets disconnected
which causes vcpi to become 0 then we try to make the payload =
~BIT(vcpi - 1) which is a negative shift. VCPI id should never
really be 0 hence skip changing the payload mask if VCPI is 0.

Otherwise it leads to
<7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc
[drm_display_helper]] port ffff888126ce9000 (3)
<4> [515.287267] -----------[ cut here ]-----------
<3> [515.287268] UBSAN: shift-out-of-bounds in
../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36
<3> [515.287271] shift exponent -1 is negative
<4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G
S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary)
<4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
<4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P
WIFI, BIOS 1645 03/15/2024
<4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work
[drm_display_helper]
<4> [515.287303] Call Trace:
<4> [515.287304] <TASK>
<4> [515.287306] dump_stack_lvl+0xc1/0xf0
<4> [515.287313] dump_stack+0x10/0x20
<4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0
<4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0
<4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d
[drm_display_helper]
<4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe]
<4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0
<4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60
<4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe]
<4> [515.287740] ? find_held_lock+0x31/0x90
<4> [515.287747] ? lock_release+0xce/0x2a0
<4> [515.287754] drm_atomic_check_only+0x6a2/0xb40
<4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140
<4> [515.287765] drm_atomic_commit+0x6e/0xf0
<4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10
<4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0
<4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0
<4> [515.287795] ? mutex_lock_nested+0x1b/0x30
<4> [515.287801] drm_client_modeset_commit+0x26/0x50
<4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110
<4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140
<4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0
<4> [515.287819] drm_client_hotplug+0x6c/0xf0
<4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0
<4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30
<4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410
[drm_display_helper]
<4> [515.287861] process_one_work+0x22b/0x6f0
<4> [515.287874] worker_thread+0x1e8/0x3d0
<4> [515.287879] ? __pfx_worker_thread+0x10/0x10
<4> [515.287882] kthread+0x11c/0x250
<4> [515.287886] ? __pfx_kthread+0x10/0x10
<4> [515.287890] ret_from_fork+0x2d7/0x310
<4> [515.287894] ? __pfx_kthread+0x10/0x10
<4> [515.287897] ret_from_fork_asm+0x1a/0x30

🎖@cveNotify

🚨 CVE-2025-71306
In the Linux kernel, the following vulnerability has been resolved:

ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec()

KASAN reported a stack-out-of-bounds access in ima_appraise_measurement
from is_bprm_creds_for_exec:

BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0
Read of size 1 at addr ffffc9000160f940 by task sudo/550
The buggy address belongs to stack of task sudo/550
and is located at offset 24 in frame:
ima_appraise_measurement+0x0/0x16a0
This frame has 2 objects:
[48, 56) 'file'
[80, 148) 'hash'

This is caused by using container_of on the *file pointer. This offset
calculation is what triggers the stack-out-of-bounds error.

In order to fix this, pass in a bprm_is_check boolean which can be set
depending on how process_measurement is called. If the caller has a
linux_binprm pointer and the function is BPRM_CHECK we can determine
is_check and set it then. Otherwise set it to false.

🎖@cveNotify

🚨 CVE-2025-71307
In the Linux kernel, the following vulnerability has been resolved:

drm/panthor: Fix NULL pointer dereference on panthor_fw_unplug

This patch removes the MCU halt and wait for halt procedures during
panthor_fw_unplug() as the MCU can be in a variety of states or the FW
may not even be loaded/initialized at all, the latter of which can lead
to a NULL pointer dereference.

It should be safe on unplug to just disable the MCU without waiting for
it to halt as it may not be able to.

🎖@cveNotify

🚨 CVE-2025-71308
In the Linux kernel, the following vulnerability has been resolved:

accel/amdxdna: Fix potential NULL pointer dereference in context cleanup

aie_destroy_context() is invoked during error handling in
aie2_create_context(). However, aie_destroy_context() assumes that the
context's mailbox channel pointer is non-NULL. If mailbox channel
creation fails, the pointer remains NULL and calling aie_destroy_context()
can lead to a NULL pointer dereference.

In aie2_create_context(), replace aie_destroy_context() with a function
which request firmware to remove the context created previously.

🎖@cveNotify

🚨 CVE-2025-71309
In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: fix deadlock in ni_read_folio_cmpr

Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr).
This is caused by a lock inversion deadlock involving the inode mutex
(ni_lock) and page locks.

Scenario:
1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock.
2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in
the compressed frame (including page Y).
3. Concurrently, Task B (e.g., via readahead) has locked page Y and
calls ntfs_read_folio().
4. Task B waits for ni_lock (held by A).
5. Task A waits for page Y lock (held by B).
-> DEADLOCK.

The fix is to restructure locking: do not take ni_lock in ntfs_read_folio().
Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required
page locks for the frame have been successfully acquired. This restores the
correct lock ordering (Page Lock -> ni_lock) consistent with VFS.

[almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr]

🎖@cveNotify

🚨 CVE-2025-71311
In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: Initialize new folios before use

KMSAN reports an uninitialized value in longest_match_std(), invoked
from ntfs_compress_write(). When new folios are allocated without being
marked uptodate and ni_read_frame() is skipped because the caller expects
the frame to be completely overwritten, some reserved folios may remain
only partially filled, leaving the rest memory uninitialized.

🎖@cveNotify

🚨 CVE-2025-71312
In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super()

In ntfs_fill_super(), the fc->fs_private pointer is set to NULL without
first freeing the memory it points to. This causes the subsequent call to
ntfs_fs_free() to skip freeing the ntfs_mount_options structure.

This results in a kmemleak report:

unreferenced object 0xff1100015378b800 (size 32):
comm "mount", pid 582, jiffies 4294890685
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 ed ff ed ff 00 04 00 00 ................
backtrace (crc ed541d8c):
__kmalloc_cache_noprof+0x424/0x5a0
__ntfs_init_fs_context+0x47/0x590
alloc_fs_context+0x5d8/0x960
__x64_sys_fsopen+0xb1/0x190
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e

This issue can be reproduced using the following commands:
fallocate -l 100M test.file
mount test.file /tmp/test

Since sbi->options is duplicated from fc->fs_private and does not
directly use the memory allocated for fs_private, it is unnecessary to
set fc->fs_private to NULL.

Additionally, this patch simplifies the code by utilizing the helper
function put_mount_options() instead of open-coding the cleanup logic.

🎖@cveNotify

🚨 CVE-2026-45847
In the Linux kernel, the following vulnerability has been resolved:

net: remove WARN_ON_ONCE when accessing forward path array

Although unlikely, recent support for IPIP tunnels increases chances of
reaching this WARN_ON_ONCE if userspace manages to build a sufficiently
long forward path.

Remove it.

🎖@cveNotify

🚨 CVE-2026-45848
In the Linux kernel, the following vulnerability has been resolved:

apparmor: fix NULL sock in aa_sock_file_perm

Deal with the potential that sock and sock-sk can be NULL during
socket setup or teardown. This could lead to an oops. The fix for NULL
pointer dereference in __unix_needs_revalidation shows this is at
least possible for af_unix sockets. While the fix for af_unix sockets
applies for newer mediation this is still the fall back path for older
af_unix mediation and other sockets, so ensure it is covered.

🎖@cveNotify

🚨 CVE-2026-45849
In the Linux kernel, the following vulnerability has been resolved:

net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj()

ocelot_port_xmit_inj() calls ocelot_can_inject() and
ocelot_port_inject_frame() without holding the injection group lock.
Both functions contain lockdep_assert_held() for the injection lock,
and the correct caller felix_port_deferred_xmit() properly acquires
the lock using ocelot_lock_inj_grp() before calling these functions.

Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register
injection path to fix the missing lock protection. The FDMA path is not
affected as it uses its own locking mechanism.

🎖@cveNotify

🚨 CVE-2026-45850
In the Linux kernel, the following vulnerability has been resolved:

ipvs: skip ipv6 extension headers for csum checks

Protocol checksum validation fails for IPv6 if there are extension
headers before the protocol header. iph->len already contains its
offset, so use it to fix the problem.

🎖@cveNotify

🚨 CVE-2026-45851
In the Linux kernel, the following vulnerability has been resolved:

efi: Fix reservation of unaccepted memory table

The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.

If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().

This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).

Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation.

🎖@cveNotify

🚨 CVE-2026-45852
In the Linux kernel, the following vulnerability has been resolved:

RDMA/rxe: Fix double free in rxe_srq_from_init

In rxe_srq_from_init(), the queue pointer 'q' is assigned to
'srq->rq.queue' before copying the SRQ number to user space.
If copy_to_user() fails, the function calls rxe_queue_cleanup()
to free the queue, but leaves the now-invalid pointer in
'srq->rq.queue'.

The caller of rxe_srq_from_init() (rxe_create_srq) eventually
calls rxe_srq_cleanup() upon receiving the error, which triggers
a second rxe_queue_cleanup() on the same memory, leading to a
double free.

The call trace looks like this:
kmem_cache_free+0x.../0x...
rxe_queue_cleanup+0x1a/0x30 [rdma_rxe]
rxe_srq_cleanup+0x42/0x60 [rdma_rxe]
rxe_elem_release+0x31/0x70 [rdma_rxe]
rxe_create_srq+0x12b/0x1a0 [rdma_rxe]
ib_create_srq_user+0x9a/0x150 [ib_core]

Fix this by moving 'srq->rq.queue = q' after copy_to_user.

🎖@cveNotify

🚨 CVE-2026-45853
In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges()

amdgpu_discovery_get_nps_info() internally allocates memory for ranges
using kvcalloc(), which may use vmalloc() for large allocation. Using
kfree() to release vmalloc memory will lead to a memory corruption.

Use kvfree() to safely handle both kmalloc and vmalloc allocations.

Compile tested only. Issue found using a prototype static analysis tool
and code review.

🎖@cveNotify

🚨 CVE-2026-45854
In the Linux kernel, the following vulnerability has been resolved:

crypto: inside-secure/eip93 - unregister only available algorithm

EIP93 has an options register. This register indicates which crypto
algorithms are implemented in silicon. Supported algorithms are
registered on this basis. Unregister algorithms on the same basis.
Currently, all algorithms are unregistered, even those not supported
by HW. This results in panic on platforms that don't have all options
implemented in silicon.

🎖@cveNotify

🚨 CVE-2026-45855
In the Linux kernel, the following vulnerability has been resolved:

ata: libata-scsi: avoid Non-NCQ command starvation

When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.

However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.

Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.

Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.

This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.

When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.

Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout.

🎖@cveNotify

🚨 CVE-2026-45856
In the Linux kernel, the following vulnerability has been resolved:

RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send

ib_uverbs_post_send() uses cmd.wqe_size from userspace without any
validation before passing it to kmalloc() and using the allocated
buffer as struct ib_uverbs_send_wr.

If a user provides a small wqe_size value (e.g., 1), kmalloc() will
succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge,
and other fields will read beyond the allocated buffer, resulting in
an out-of-bounds read from kernel heap memory. This could potentially
leak sensitive kernel information to userspace.

Additionally, providing an excessively large wqe_size can trigger a
WARNING in the memory allocation path, as reported by syzkaller.

This is inconsistent with ib_uverbs_unmarshall_recv() which properly
validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before
proceeding.

Add the same validation for ib_uverbs_post_send() to ensure wqe_size
is at least sizeof(struct ib_uverbs_send_wr).

🎖@cveNotify