🚨 CVE-2026-10592
Certificates with wildcard DNS SANs (e.g. *.example.com) bypassed CA name-constraint checks. A certificate with a wildcard DNS SAN that should be rejected by the issuing CA's permitted/excluded DNS name constraints could be accepted.

🎖@cveNotify

🚨 CVE-2026-11310
X.509 trust-chain bypass in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra (OPENSSL_EXTRA) and whose application validates certificates by calling X509_verify_cert() with caller-supplied untrusted intermediate certificates; for those users it is critical, otherwise the library is unaffected. In particular, native wolfSSL TLS/DTLS usage is not impacted. wolfSSL's X509_verify_cert() temporarily loads each caller-supplied untrusted intermediate into the certificate manager but failed to drop them before the trusted-store check, so an untrusted intermediate could anchor the path itself. An attacker can present a chain that never reaches a configured trust anchor and have it accepted, resulting in acceptance of an attacker-controlled certificate. This is certificate verification independent of TLS (e.g. S/MIME/CMS, code/firmware signing, JWT/JWS x5c), is not specific to any key type or algorithm, and a single untrusted intermediate suffices. The default wolfSSL TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only TLS applications doing manual or deferred peer verification through this API are, which also requires --enable-sessioncerts.

🎖@cveNotify

🚨 CVE-2026-12340
Out-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key without checking that the key is at least that long. A public key shorter than 65 bytes results in an out-of-bounds heap read, leading to a potential crash (denial of service); there is no out-of-bounds write. Note this only affects builds with SM2 support (--enable-sm2 or --enable-all).

🎖@cveNotify

🚨 CVE-2026-2299
The Mattermost Google Drive plugin before version 1.1.0 fails to validate channel membership in the file creation endpoint, allowing authenticated users with a connected Google account to share Google Drive files to unauthorized private channels and disclose private channel membership.

🎖@cveNotify

🚨 CVE-2026-37149
GROCERY-STORE-MANAGEMENT-SYSTEM-USING-PHP-AND-MYSQL-PHPMYADMIN v1.0 was discovered to contain a SQL injection vulnerability in the scost parameter in /grocery/search_products.php. This vulnerability allows attackers to access sensitive database information via a crafted SQL statement.

🎖@cveNotify

🚨 CVE-2026-37454
Insecure Permissions vulnerability in MSI NBFoundation Service v.2.0.2506.1201 allows a remote attacker to obtain sensitive information via the 3DES-ECB encryption

🎖@cveNotify

🚨 CVE-2026-46601
The webp decoder can panic when processing a VP8 chunk with dimensions that do not match the canvas size.

🎖@cveNotify

🚨 CVE-2026-46602
The TIFF decoder does not set a limit on the size of tiles in tiled images, permitting a malicious or corrupt image containing a very large tile to cause unbounded memory consumption.

🎖@cveNotify

🚨 CVE-2026-55958
Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected.

🎖@cveNotify

🚨 CVE-2026-55960
Un-negotiated Raw Public Key (RFC 7250) accepted in place of an X.509 certificate, bypassing chain validation. A raw public key has no chain, so ParseCertRelative() accepts it without performing any trust verification; it must therefore only be accepted when RPK was actually negotiated for that peer. The check now defaults the expected type to X.509 (per RFC 7250/8446) when no type was negotiated, comparing against the received server certificate type on the client and the selected client certificate type on the server, and rejects any mismatch, including an un-negotiated raw public key, with UNSUPPORTED_CERTIFICATE. Only affects builds with Raw Public Key support (HAVE_RPK) enabled - disabled by default in a standalone build, but included in --enable-all.

🎖@cveNotify

🚨 CVE-2026-55964
Chain intermediate CA:TRUE without keyCertSign accepted as a signing CA. Intermediate CA certificates are required to have the keyCertSign key usage when a Key Usage extension is present, but chain-supplied temporary CAs (WOLFSSL_TEMP_CA) added while building a certificate path were previously exempted from this check, so an intermediate asserting CA:TRUE but lacking keyCertSign was accepted as a signing CA. The check now applies to chain-supplied temporary CAs as well; only operator-loaded root certificates (WOLFSSL_USER_CA) and self-signed roots remain exempt. Per RFC 5280 an absent Key Usage extension implies all usages, so the requirement is enforced only when the extension is actually present (extKeyUsageSet). Affects the OpenSSL-compatibility certificate-path-building path (X509_verify_cert / X509_STORE, OPENSSL_EXTRA/OPENSSL_ALL), where untrusted chain intermediates are added as temporary CAs; native (non-OpenSSL-compat) certificate verification does not create temporary CAs and is unaffected. Within those builds, the check applies unless ALLOW_INVALID_CERTSIGN is defined.

🎖@cveNotify

🚨 CVE-2026-57520
Bitwarden Server before 2026.5.0 contains a privilege escalation vulnerability that allows authenticated Custom users with ManageUsers permission to remove Admin accounts from an organization by exploiting a missing role hierarchy check in the bulk user-remove endpoint. Attackers can supply Admin organization-user IDs in a bulk DELETE request to bypass the guard enforced on the single-user removal path, effectively removing one or more Admin accounts from an organization.

🎖@cveNotify

🚨 CVE-2026-57521
Bitwarden Server before 2026.5.0 contains a broken access control vulnerability that allows any authenticated user to access arbitrary organization billing data by supplying an arbitrary organizationId to the PreviewInvoiceController endpoints without membership or authorization checks. Attackers can exploit the missing ManageOrganizationBillingRequirement on the preview invoice endpoints to retrieve Stripe-computed tax totals, subscription status, and billing details derived from any target organization's real customer and subscription data.

🎖@cveNotify

🚨 CVE-2026-57522
Bitwarden Server before 2026.5.0 contains a JSON injection vulnerability in IntegrationTemplateProcessor.ReplaceTokens(), which substitutes user-controlled values into event-integration templates without JSON encoding. When an organization has configured an event integration whose template references a user-controlled token (such as #ActingUserName# or #UserName#, populated from a member's display name), an authenticated member can set their display name to JSON metacharacters and inject arbitrary key-value pairs into the rendered payloads delivered to webhook, SIEM, Slack, Teams, or Datadog endpoints, making injected fields indistinguishable from legitimate template output.

🎖@cveNotify

🚨 CVE-2026-7531
Use-after-free in PQC hybrid key-share handling. This is an incomplete-fix follow-up to CVE-2026-5460 (released in 5.9.1): a malicious TLS 1.3 server sending a truncated PQC hybrid KeyShare can still trigger the error cleanup path to operate on freed memory.

🎖@cveNotify

🚨 CVE-2026-45846
In the Linux kernel, the following vulnerability has been resolved:

bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()

bareudp_fill_metadata_dst() passes bareudp->sock to
udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.
The socket is only created in bareudp_open() and NULLed in
bareudp_stop(), so calling this function while the device is down
triggers a NULL dereference via sock->sk.

BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160)
Call Trace:
<TASK>
bareudp_fill_metadata_dst (drivers/net/bareudp.c:532)
do_execute_actions (net/openvswitch/actions.c:901)
ovs_execute_actions (net/openvswitch/actions.c:1589)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:700)
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1209)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>

Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths
in the same driver.

🎖@cveNotify

🚨 CVE-2025-71303
In the Linux kernel, the following vulnerability has been resolved:

accel/amdxdna: Fix race condition when checking rpm_on

When autosuspend is triggered, driver rpm_on flag is set to indicate that
a suspend/resume is already in progress. However, when a userspace
application submits a command during this narrow window,
amdxdna_pm_resume_get() may incorrectly skip the resume operation because
the rpm_on flag is still set. This results in commands being submitted
while the device has not actually resumed, causing unexpected behavior.

The set_dpm() is called by suspend/resume, it relied on rpm_on flag to
avoid calling into rpm suspend/resume recursivly. So to fix this, remove
the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm()
which explicitly resumes the device before invoking set_dpm(). With this
change, set_dpm() is called directly inside the suspend or resume execution
path. Otherwise, aie2_pm_set_dpm() is called.

🎖@cveNotify

🚨 CVE-2025-71304
In the Linux kernel, the following vulnerability has been resolved:

smack: /smack/doi: accept previously used values

Writing to /smack/doi a value that has ever been
written there in the past disables networking for
non-ambient labels.
E.g.

# cat /smack/doi
3
# netlabelctl -p cipso list
Configured CIPSO mappings (1)
DOI value : 3
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (3)
domain: "_" (IPv4)
protocol: UNLABELED
domain: DEFAULT (IPv4)
protocol: CIPSO, DOI = 3
domain: DEFAULT (IPv6)
protocol: UNLABELED

# cat /smack/ambient
_
# cat /proc/$$/attr/smack/current
_
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms
# echo foo >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms
unknown option 86

# echo 4 >/smack/doi
# echo 3 >/smack/doi
!> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17
# echo 3 >/smack/doi
!> [ 249.402261] smk_cipso_doi:678 remove rc = -2
!> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17

# ping -c1 10.1.95.12
!!> ping: 10.1.95.12: Address family for hostname not supported

# echo _ >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms

This happens because Smack keeps decommissioned DOIs,
fails to re-add them, and consequently refuses to add
the “default” domain map:

# netlabelctl -p cipso list
Configured CIPSO mappings (2)
DOI value : 3
mapping type : PASS_THROUGH
DOI value : 4
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (2)
domain: "_" (IPv4)
protocol: UNLABELED
!> (no ipv4 map for default domain here)
domain: DEFAULT (IPv6)
protocol: UNLABELED

Fix by clearing decommissioned DOI definitions and
serializing concurrent DOI updates with a new lock.

Also:
- allow /smack/doi to live unconfigured, since
adding a map (netlbl_cfg_cipsov4_map_add) may fail.
CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI
- add new DOI before removing the old default map,
so the old map remains if the add fails

(2008-02-04, Casey Schaufler)

🎖@cveNotify

🚨 CVE-2025-71305
In the Linux kernel, the following vulnerability has been resolved:

drm/display/dp_mst: Add protection against 0 vcpi

When releasing a timeslot there is a slight chance we may end up
with the wrong payload mask due to overflow if the delayed_destroy_work
ends up coming into play after a DP 2.1 monitor gets disconnected
which causes vcpi to become 0 then we try to make the payload =
~BIT(vcpi - 1) which is a negative shift. VCPI id should never
really be 0 hence skip changing the payload mask if VCPI is 0.

Otherwise it leads to
<7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc
[drm_display_helper]] port ffff888126ce9000 (3)
<4> [515.287267] -----------[ cut here ]-----------
<3> [515.287268] UBSAN: shift-out-of-bounds in
../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36
<3> [515.287271] shift exponent -1 is negative
<4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G
S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary)
<4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
<4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P
WIFI, BIOS 1645 03/15/2024
<4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work
[drm_display_helper]
<4> [515.287303] Call Trace:
<4> [515.287304] <TASK>
<4> [515.287306] dump_stack_lvl+0xc1/0xf0
<4> [515.287313] dump_stack+0x10/0x20
<4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0
<4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0
<4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d
[drm_display_helper]
<4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe]
<4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0
<4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60
<4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe]
<4> [515.287740] ? find_held_lock+0x31/0x90
<4> [515.287747] ? lock_release+0xce/0x2a0
<4> [515.287754] drm_atomic_check_only+0x6a2/0xb40
<4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140
<4> [515.287765] drm_atomic_commit+0x6e/0xf0
<4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10
<4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0
<4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0
<4> [515.287795] ? mutex_lock_nested+0x1b/0x30
<4> [515.287801] drm_client_modeset_commit+0x26/0x50
<4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110
<4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140
<4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0
<4> [515.287819] drm_client_hotplug+0x6c/0xf0
<4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0
<4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30
<4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410
[drm_display_helper]
<4> [515.287861] process_one_work+0x22b/0x6f0
<4> [515.287874] worker_thread+0x1e8/0x3d0
<4> [515.287879] ? __pfx_worker_thread+0x10/0x10
<4> [515.287882] kthread+0x11c/0x250
<4> [515.287886] ? __pfx_kthread+0x10/0x10
<4> [515.287890] ret_from_fork+0x2d7/0x310
<4> [515.287894] ? __pfx_kthread+0x10/0x10
<4> [515.287897] ret_from_fork_asm+0x1a/0x30

🎖@cveNotify

🚨 CVE-2025-71306
In the Linux kernel, the following vulnerability has been resolved:

ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec()

KASAN reported a stack-out-of-bounds access in ima_appraise_measurement
from is_bprm_creds_for_exec:

BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0
Read of size 1 at addr ffffc9000160f940 by task sudo/550
The buggy address belongs to stack of task sudo/550
and is located at offset 24 in frame:
ima_appraise_measurement+0x0/0x16a0
This frame has 2 objects:
[48, 56) 'file'
[80, 148) 'hash'

This is caused by using container_of on the *file pointer. This offset
calculation is what triggers the stack-out-of-bounds error.

In order to fix this, pass in a bprm_is_check boolean which can be set
depending on how process_measurement is called. If the caller has a
linux_binprm pointer and the function is BPRM_CHECK we can determine
is_check and set it then. Otherwise set it to false.

🎖@cveNotify

🚨 CVE-2025-71307
In the Linux kernel, the following vulnerability has been resolved:

drm/panthor: Fix NULL pointer dereference on panthor_fw_unplug

This patch removes the MCU halt and wait for halt procedures during
panthor_fw_unplug() as the MCU can be in a variety of states or the FW
may not even be loaded/initialized at all, the latter of which can lead
to a NULL pointer dereference.

It should be safe on unplug to just disable the MCU without waiting for
it to halt as it may not be able to.

🎖@cveNotify