🚨 CVE-2026-54029
LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.4-rc1, the DELETE /api/messages/:conversationId/:messageId endpoint allows any authenticated user to delete any other user's messages. The validateMessageReq middleware only validates that the conversationId belongs to the requesting user, but the handler calls deleteMessages({ messageId }) using only the messageId as the MongoDB filter — without adding a user constraint. An attacker provides their own valid conversationId (to pass validation) and the victim's messageId (to target deletion), resulting in permanent, irrecoverable message deletion. This vulnerability is fixed in 0.8.4-rc1.

🎖@cveNotify

🚨 CVE-2026-54030
LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.5, LibreChat's MCP OAuth implementation does not validate that the resource parameter from OAuth Protected Resource metadata (RFC 9728) matches the configured MCP server URL, allowing a malicious MCP server to steal access tokens intended for a legitimate server. This vulnerability is fixed in 0.8.5.

🎖@cveNotify

🚨 CVE-2026-54033
LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.4-rc1, LibreChat allows users to configure custom OpenAI-compatible API endpoints by setting a baseURL. This URL is used to construct HTTP requests without any SSRF validation — no private IP check, no scheme restriction, no DNS pinning. An authenticated user can set baseURL to internal network addresses. This vulnerability is fixed in 0.8.4-rc1.

🎖@cveNotify

🚨 CVE-2026-54037
LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.4-rc1, the fix for CVE-2025-7105 added forkIpLimiter and forkUserLimiter rate limiters to POST /api/convos/fork to prevent rapid-fire conversation duplication. However, the POST /api/convos/duplicate endpoint — which is in the same file and performs the exact same expensive database operations — was not given any rate limiter. An authenticated user can bypass the CVE-2025-7105 fix by using /duplicate instead of /fork to exhaust server resources. This vulnerability is fixed in 0.8.4-rc1.

🎖@cveNotify

🚨 CVE-2026-54040
LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.4-rc1, the POST /api/auth/2fa/backup/regenerate endpoint regenerates all 2FA backup codes without requiring any TOTP token or existing backup code verification. An attacker with a stolen session token can silently replace a victim's backup codes and use them to bypass 2FA login or disable 2FA entirely. This vulnerability is fixed in 0.8.4-rc1.

🎖@cveNotify

🚨 CVE-2026-55411
ToolJet is the open-source foundation am AI-native platform for building and deploying internal tools, workflows and AI agents. Prior to 3.20.1780-lts, the authenticated endpoint POST /api/data-sources/decrypt returns the decrypted plaintext for any credential whose credential_id is supplied in the request body. Unlike every neighbouring data-source route, this handler is not protected by ValidateDataSourceGuard, does not receive the calling @User(), and the underlying CredentialsService.getValue() looks the credential up by id only, with no organization scoping. As a result, any authenticated user of any organization can decrypt the data-source secrets of any other organization by supplying that organization's credential_id — a cross-tenant confidentiality breach. This vulnerability is fixed in 3.20.1780-lts.

🎖@cveNotify

🚨 CVE-2026-55412
ToolJet is the open-source foundation am AI-native platform for building and deploying internal tools, workflows and AI agents. Prior to 3.20.178-lts, there's an SSRF in the RestAPI data source component. The RestAPI data source executes HTTP requests server-side, and its private IP filter only checks the hostname string — not the resolved IP. DNS names like 169.254.169.254.nip.io resolve to the Azure IMDS link-local address and bypass the filter entirely. This allows any authenticated user (free tier) to steal Azure managed identity tokens for the AKS production cluster. This vulnerability is fixed in 3.20.178-lts.

🎖@cveNotify

🚨 CVE-2026-55413
ToolJet is the open-source foundation am AI-native platform for building and deploying internal tools, workflows and AI agents. Prior to 3.20.178-lts, any authenticated user with builder role (free tier) can overwrite a globally-shared marketplace plugin with arbitrary JavaScript that executes server-side with full Node.js access (require, process). The malicious code runs whenever any user on the instance triggers a query using that plugin — achieving both RCE and supply-chain compromise of the entire ToolJet deployment. This vulnerability is fixed in 3.20.178-lts.

🎖@cveNotify

🚨 CVE-2026-55439
Halo is an open source website building tool. Prior to 2.24.3, a path traversal vulnerability in the backup download endpoint allows authenticated administrators to read arbitrary files from the server filesystem. The backup download endpoint (GET /apis/console.api.migration.halo.run/v1alpha1/backups/{name}/files/{filename}) in MigrationServiceImpl.download() resolves the backup filename via Path.resolve() without validating that the resolved path stays within the designated backups directory. Also, the Backup creation endpoint (POST /apis/migration.halo.run/v1alpha1/backups) does not sanitize the status fields during creation This vulnerability is fixed in 2.24.3.

🎖@cveNotify

🚨 CVE-2026-9083
A flaw was found in Keycloak. A realm administrator with the "manage-realm" role can exploit this vulnerability by submitting an arbitrary filesystem path as a keystore parameter when creating a key provider component. This allows the administrator to probe arbitrary filesystem paths, determining which files exist and are readable by the Keycloak process. This information disclosure could be used to identify high-value targets for follow-on attacks.

🎖@cveNotify

🚨 CVE-2026-9086
A flaw was found in Keycloak. A remote attacker with administrative privileges, specifically those with `manage-client` permission or access to client registration endpoints, could bypass client Uniform Resource Identifier (URI) validation. This is achieved by registering a malicious client with a specially crafted redirect URI using a case-insensitive `javascript:` or `data:` scheme. This Cross-Site Scripting (XSS) vulnerability allows for arbitrary code execution in the Keycloak origin when a victim clicks the crafted link, such as in the logout flow or the Admin Console.

🎖@cveNotify

🚨 CVE-2026-9099
A flaw was found in Keycloak. A missing authorization check in the GroupResource.addChild() endpoint within the Admin REST API allows an authenticated user with limited administrative privileges to reparent any existing group. When Fine-Grained Admin Permissions v2 (FGAPv2) is enabled, an attacker with management rights over a single low-privilege group can reparent a highly privileged group (such as one possessing the realm-admin role) under their managed group.

Because group permissions follow a hierarchical structure, this action unauthorizedly grants the attacker management and password-reset capabilities over the members of the targeted privileged group. An attacker can exploit this to reset an administrator's password, compromise the account, and achieve a full realm takeover, leading to a complete compromise of confidentiality, integrity, and availability.

🎖@cveNotify

🚨 CVE-2026-9705
A flaw was found in Keycloak's client registration service. A remote attacker, possessing a previously issued Registration Access Token (RAT), could exploit this vulnerability to re-enable a client that an administrator had explicitly disabled. This bypasses security controls, allowing the attacker to reset the client's secret and potentially regain privileged API access. The primary impact includes unauthorized information disclosure and potential integrity compromise.

🎖@cveNotify

🚨 CVE-2026-9799
A flaw was found in org.keycloak.authorization. An authenticated user with a granted User-Managed Access (UMA) permission ticket for one resource can exploit this by using a specific permission request prefix to bypass per-resource access control. This allows the user to gain unauthorized access to all resources of that type within the same resource server, even if they do not have a ticket for those specific resources. This vulnerability requires the resource server to be configured in PERMISSIVE policy enforcement mode and affects typed resources with ownerManagedAccess enabled, where no explicit policy protects the resource type. The primary consequence is unauthorized information disclosure or modification of resources.

🎖@cveNotify

🚨 CVE-2026-9800
A flaw was found in Keycloak Policy Enforcer. This vulnerability allows any authenticated user to bypass all authorization policies, including role, scope, and User-Managed Access (UMA) permission checks. By including the configured access-denied page path within a request URL, either as a path segment or a query parameter, an attacker can gain unauthorized access to protected resources.

🎖@cveNotify

🚨 CVE-2026-11999
X.509 trust-chain bypass (path-depth exhaustion) in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra whose application calls X509_verify_cert() with caller-supplied untrusted intermediates; for those users it is critical, otherwise the library is unaffected. Native wolfSSL TLS/DTLS usage is not impacted. X509_verify_cert() returned success based only on the last verified link rather than on reaching a trust anchor: when the supplied chain is deeper than the verifier's maximum path depth (default 100), path building runs out of depth while still walking untrusted intermediates and the chain is accepted even though it never reaches a configured trust anchor, allowing acceptance of an attacker-controlled certificate. The default TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only applications doing manual or deferred verification through this API are.

🎖@cveNotify

🚨 CVE-2026-47770
jq is a command-line JSON processor. Prior to 1.8.2, comparing two sufficiently deeply nested arrays with the == operator exhausts the C stack on jq's ordinary command-line surface, resulting in denial of service via stack exhaustion (uncontrolled recursion). The crash occurs in jq's recursive structural comparison code, with the recursion repeating through jvp_array_equal() and jv_equal() in src/jv.c when comparing deeply nested arrays; a nearby sort comparator path through jv_cmp() in src/jv_aux.c overflows the stack at a larger nesting depth from the same missing recursion guard. Anyone running jq comparisons on attacker-controlled deeply nested JSON values, or embedding jq in a context where untrusted data can reach the == comparison path, is affected. This vulnerability is fixed in 1.8.2.

🎖@cveNotify

🚨 CVE-2026-49839
jq is a command-line JSON processor. Prior to 1.8.2,` jq --rawfile` can turn a handled oversized-string error into invalid-state reuse and a real heap out-of-bounds write in assertion-disabled builds. When jv_load_file(raw=1) reads an attacker-controlled file, it repeatedly appends file chunks to the same jv string accumulator. Once jv_string_append_buf() returns jv_invalid_with_msg("String too long"), the raw-file loop does not stop. If the file contains at least one more byte, the next loop iteration appends a new chunk to an object that is already invalid. With assertions enabled this aborts in jvp_string_ptr(). With assertions disabled, the invalid object is interpreted as a string object and ASan reports heap-buffer-overflow. This vulnerability is fixed in 1.8.2.

🎖@cveNotify

🚨 CVE-2026-50014
pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm passes the lockfile-controlled git resolution.commit value to git fetch without a -- separator or commit-format validation. For git dependencies fetched through the shallow-fetch path, a malicious lockfile can replace the expected 40-character commit hash with a Git option such as --upload-pack=<command>. For SSH and local transports, --upload-pack can execute the supplied command. HTTPS transports ignore --upload-pack, so the practical attack surface is primarily SSH or local git dependencies. This vulnerability is fixed in 10.34.0 and 11.4.0.

🎖@cveNotify

🚨 CVE-2026-50015
pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm's patch application pipeline (@pnpm/patch-package) performs no path validation on file paths extracted from .patch files. An attacker who contributes a malicious patch file via a pull request can write attacker-controlled content to or delete arbitrary files on the filesystem during pnpm install, as the user running the install. The diff --git header paths containing ../../ sequences traverse out of the package directory, and the traversal is difficult to catch in code review because patch file diff headers are opaque to most reviewers. This vulnerability is fixed in 10.34.0 and 11.4.0.

🎖@cveNotify

🚨 CVE-2026-50016
pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm allows a transitive dependency alias from registry package metadata to contain path traversal segments. During install, pnpm later uses that alias as a filesystem path when linking dependency nodes. As a result, a registry package can cause `pnpm install --ignore-scripts` to replace paths in the current project with symlinks to attacker-controlled dependency package directories. This vulnerability is fixed in 10.34.0 and 11.4.0.

🎖@cveNotify