🚨 CVE-2025-49175
A flaw was found in the X Rendering extension's handling of animated cursors. If a client provides no cursors, the server assumes at least one is present, leading to an out-of-bounds read and potential crash.
🎖@cveNotify
A flaw was found in the X Rendering extension's handling of animated cursors. If a client provides no cursors, the server assumes at least one is present, leading to an out-of-bounds read and potential crash.
🎖@cveNotify
🚨 CVE-2025-49176
A flaw was found in the Big Requests extension. The request length is multiplied by 4 before checking against the maximum allowed size, potentially causing an integer overflow and bypassing the size check.
🎖@cveNotify
A flaw was found in the Big Requests extension. The request length is multiplied by 4 before checking against the maximum allowed size, potentially causing an integer overflow and bypassing the size check.
🎖@cveNotify
🚨 CVE-2025-49177
A flaw was found in the XFIXES extension. The XFixesSetClientDisconnectMode handler does not validate the request length, allowing a client to read unintended memory from previous requests.
🎖@cveNotify
A flaw was found in the XFIXES extension. The XFixesSetClientDisconnectMode handler does not validate the request length, allowing a client to read unintended memory from previous requests.
🎖@cveNotify
🚨 CVE-2025-49179
A flaw was found in the X Record extension. The RecordSanityCheckRegisterClients function does not check for an integer overflow when computing request length, which allows a client to bypass length checks.
🎖@cveNotify
A flaw was found in the X Record extension. The RecordSanityCheckRegisterClients function does not check for an integer overflow when computing request length, which allows a client to bypass length checks.
🎖@cveNotify
🚨 CVE-2025-49180
A flaw was found in the RandR extension, where the RRChangeProviderProperty function does not properly validate input. This issue leads to an integer overflow when computing the total size to allocate.
🎖@cveNotify
A flaw was found in the RandR extension, where the RRChangeProviderProperty function does not properly validate input. This issue leads to an integer overflow when computing the total size to allocate.
🎖@cveNotify
🚨 CVE-2025-6019
A Local Privilege Escalation (LPE) vulnerability was found in libblockdev. Generally, the "allow_active" setting in Polkit permits a physically present user to take certain actions based on the session type. Due to the way libblockdev interacts with the udisks daemon, an "allow_active" user on a system may be able escalate to full root privileges on the target host. Normally, udisks mounts user-provided filesystem images with security flags like nosuid and nodev to prevent privilege escalation. However, a local attacker can create a specially crafted XFS image containing a SUID-root shell, then trick udisks into resizing it. This mounts their malicious filesystem with root privileges, allowing them to execute their SUID-root shell and gain complete control of the system.
🎖@cveNotify
A Local Privilege Escalation (LPE) vulnerability was found in libblockdev. Generally, the "allow_active" setting in Polkit permits a physically present user to take certain actions based on the session type. Due to the way libblockdev interacts with the udisks daemon, an "allow_active" user on a system may be able escalate to full root privileges on the target host. Normally, udisks mounts user-provided filesystem images with security flags like nosuid and nodev to prevent privilege escalation. However, a local attacker can create a specially crafted XFS image containing a SUID-root shell, then trick udisks into resizing it. This mounts their malicious filesystem with root privileges, allowing them to execute their SUID-root shell and gain complete control of the system.
🎖@cveNotify
🚨 CVE-2025-6032
A flaw was found in Podman. The podman machine init command fails to verify the TLS certificate when downloading the VM images from an OCI registry. This issue results in a Man In The Middle attack.
🎖@cveNotify
A flaw was found in Podman. The podman machine init command fails to verify the TLS certificate when downloading the VM images from an OCI registry. This issue results in a Man In The Middle attack.
🎖@cveNotify
🚨 CVE-2025-7424
A flaw was found in the libxslt library. The same memory field, psvi, is used for both stylesheet and input data, which can lead to type confusion during XML transformations. This vulnerability allows an attacker to crash the application or corrupt memory. In some cases, it may lead to denial of service or unexpected behavior.
🎖@cveNotify
A flaw was found in the libxslt library. The same memory field, psvi, is used for both stylesheet and input data, which can lead to type confusion during XML transformations. This vulnerability allows an attacker to crash the application or corrupt memory. In some cases, it may lead to denial of service or unexpected behavior.
🎖@cveNotify
🚨 CVE-2025-7425
A flaw was found in libxslt where the attribute type, atype, flags are modified in a way that corrupts internal memory management. When XSLT functions, such as the key() process, result in tree fragments, this corruption prevents the proper cleanup of ID attributes. As a result, the system may access freed memory, causing crashes or enabling attackers to trigger heap corruption.
🎖@cveNotify
A flaw was found in libxslt where the attribute type, atype, flags are modified in a way that corrupts internal memory management. When XSLT functions, such as the key() process, result in tree fragments, this corruption prevents the proper cleanup of ID attributes. As a result, the system may access freed memory, causing crashes or enabling attackers to trigger heap corruption.
🎖@cveNotify
🚨 CVE-2025-6018
A Local Privilege Escalation (LPE) vulnerability has been discovered in pam-config within Linux Pluggable Authentication Modules (PAM). This flaw allows an unprivileged local attacker (for example, a user logged in via SSH) to obtain the elevated privileges normally reserved for a physically present, "allow_active" user. The highest risk is that the attacker can then perform all allow_active yes Polkit actions, which are typically restricted to console users, potentially gaining unauthorized control over system configurations, services, or other sensitive operations.
🎖@cveNotify
A Local Privilege Escalation (LPE) vulnerability has been discovered in pam-config within Linux Pluggable Authentication Modules (PAM). This flaw allows an unprivileged local attacker (for example, a user logged in via SSH) to obtain the elevated privileges normally reserved for a physically present, "allow_active" user. The highest risk is that the attacker can then perform all allow_active yes Polkit actions, which are typically restricted to console users, potentially gaining unauthorized control over system configurations, services, or other sensitive operations.
🎖@cveNotify
🚨 CVE-2023-32256
A flaw was found in the Linux kernel's ksmbd component. A race condition between smb2 close operation and logoff in multichannel connections could result in a use-after-free issue.
🎖@cveNotify
A flaw was found in the Linux kernel's ksmbd component. A race condition between smb2 close operation and logoff in multichannel connections could result in a use-after-free issue.
🎖@cveNotify
🚨 CVE-2025-8067
A flaw was found in the Udisks daemon, where it allows unprivileged users to create loop devices using the D-BUS system. This is achieved via the loop device handler, which handles requests sent through the D-BUS interface. As two of the parameters of this handle, it receives the file descriptor list and index specifying the file where the loop device should be backed. The function itself validates the index value to ensure it isn't bigger than the maximum value allowed. However, it fails to validate the lower bound, allowing the index parameter to be a negative value. Under these circumstances, an attacker can cause the UDisks daemon to crash or perform a local privilege escalation by gaining access to files owned by privileged users.
🎖@cveNotify
A flaw was found in the Udisks daemon, where it allows unprivileged users to create loop devices using the D-BUS system. This is achieved via the loop device handler, which handles requests sent through the D-BUS interface. As two of the parameters of this handle, it receives the file descriptor list and index specifying the file where the loop device should be backed. The function itself validates the index value to ensure it isn't bigger than the maximum value allowed. However, it fails to validate the lower bound, allowing the index parameter to be a negative value. Under these circumstances, an attacker can cause the UDisks daemon to crash or perform a local privilege escalation by gaining access to files owned by privileged users.
🎖@cveNotify
🚨 CVE-2025-9566
There's a vulnerability in podman where an attacker may use the kube play command to overwrite host files when the kube file container a Secrete or a ConfigMap volume mount and such volume contains a symbolic link to a host file path. In a successful attack, the attacker can only control the target file to be overwritten but not the content to be written into the file.
Binary-Affected: podman
Upstream-version-introduced: v4.0.0
Upstream-version-fixed: v5.6.1
🎖@cveNotify
There's a vulnerability in podman where an attacker may use the kube play command to overwrite host files when the kube file container a Secrete or a ConfigMap volume mount and such volume contains a symbolic link to a host file path. In a successful attack, the attacker can only control the target file to be overwritten but not the content to be written into the file.
Binary-Affected: podman
Upstream-version-introduced: v4.0.0
Upstream-version-fixed: v5.6.1
🎖@cveNotify
🚨 CVE-2025-9900
A flaw was found in Libtiff. This vulnerability is a "write-what-where" condition, triggered when the library processes a specially crafted TIFF image file.
By providing an abnormally large image height value in the file's metadata, an attacker can trick the library into writing attacker-controlled color data to an arbitrary memory location. This memory corruption can be exploited to cause a denial of service (application crash) or to achieve arbitrary code execution with the permissions of the user.
🎖@cveNotify
A flaw was found in Libtiff. This vulnerability is a "write-what-where" condition, triggered when the library processes a specially crafted TIFF image file.
By providing an abnormally large image height value in the file's metadata, an attacker can trick the library into writing attacker-controlled color data to an arbitrary memory location. This memory corruption can be exploited to cause a denial of service (application crash) or to achieve arbitrary code execution with the permissions of the user.
🎖@cveNotify
🚨 CVE-2025-10230
A flaw was found in Samba, in the front-end WINS hook handling: NetBIOS names from registration packets are passed to a shell without proper validation or escaping. Unsanitized NetBIOS name data from WINS registration packets are inserted into a shell command and executed by the Samba Active Directory Domain Controller’s wins hook, allowing an unauthenticated network attacker to achieve remote command execution as the Samba process.
🎖@cveNotify
A flaw was found in Samba, in the front-end WINS hook handling: NetBIOS names from registration packets are passed to a shell without proper validation or escaping. Unsanitized NetBIOS name data from WINS registration packets are inserted into a shell command and executed by the Samba Active Directory Domain Controller’s wins hook, allowing an unauthenticated network attacker to achieve remote command execution as the Samba process.
🎖@cveNotify
🚨 CVE-2025-59088
If kdcproxy receives a request for a realm which does not have server addresses defined in its configuration, by default, it will query SRV records in the DNS zone matching the requested realm name. This creates a server-side request forgery vulnerability, since an attacker could send a request for a realm matching a DNS zone where they created SRV records pointing to arbitrary ports and hostnames (which may resolve to loopback or internal IP addresses). This vulnerability can be exploited to probe internal network topology and firewall rules, perform port scanning, and exfiltrate data. Deployments where
the "use_dns" setting is explicitly set to false are not affected.
🎖@cveNotify
If kdcproxy receives a request for a realm which does not have server addresses defined in its configuration, by default, it will query SRV records in the DNS zone matching the requested realm name. This creates a server-side request forgery vulnerability, since an attacker could send a request for a realm matching a DNS zone where they created SRV records pointing to arbitrary ports and hostnames (which may resolve to loopback or internal IP addresses). This vulnerability can be exploited to probe internal network topology and firewall rules, perform port scanning, and exfiltrate data. Deployments where
the "use_dns" setting is explicitly set to false are not affected.
🎖@cveNotify
🚨 CVE-2025-66287
A flaw was found in WebKitGTK. Processing malicious web content can cause an unexpected process crash due to improper memory handling.
🎖@cveNotify
A flaw was found in WebKitGTK. Processing malicious web content can cause an unexpected process crash due to improper memory handling.
🎖@cveNotify
🚨 CVE-2025-2515
A vulnerability was found in BlueChi, a multi-node systemd service controller used in RHIVOS. This flaw allows a user with root privileges on a managed node (qm) to create or override systemd service unit files that affect the host node. This issue can lead to privilege escalation, unauthorized service execution, and potential system compromise.
🎖@cveNotify
A vulnerability was found in BlueChi, a multi-node systemd service controller used in RHIVOS. This flaw allows a user with root privileges on a managed node (qm) to create or override systemd service unit files that affect the host node. This issue can lead to privilege escalation, unauthorized service execution, and potential system compromise.
🎖@cveNotify
🚨 CVE-2026-8658
OS Command Injection vulnerability in Rapid7 InsightConnect Tcpdump Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the options or filter parameters due to insufficient input sanitization in shell command construction.
🎖@cveNotify
OS Command Injection vulnerability in Rapid7 InsightConnect Tcpdump Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the options or filter parameters due to insufficient input sanitization in shell command construction.
🎖@cveNotify
Rapid7 Extensions
Discover Extensions for the Rapid7 Command Platform
🚨 CVE-2026-8662
Path Traversal vulnerability in the create_archive function of Rapid7 InsightConnect Compression Plugin on Linux allows authenticated attackers to write to unintended file paths via crafted filename input. The impact is limited to file corruption as content cannot be controlled by the attacker.
🎖@cveNotify
Path Traversal vulnerability in the create_archive function of Rapid7 InsightConnect Compression Plugin on Linux allows authenticated attackers to write to unintended file paths via crafted filename input. The impact is limited to file corruption as content cannot be controlled by the attacker.
🎖@cveNotify
Rapid7 Extensions
Discover Extensions for the Rapid7 Command Platform
🚨 CVE-2024-8418
A flaw was found in Aardvark-dns, which is vulnerable to a Denial of Service attack due to the serial processing of TCP DNS queries. An attacker can exploit this flaw by keeping a TCP connection open indefinitely, causing the server to become unresponsive and resulting in other DNS queries timing out. This issue prevents legitimate users from accessing DNS services, thereby disrupting normal operations and causing service downtime.
🎖@cveNotify
A flaw was found in Aardvark-dns, which is vulnerable to a Denial of Service attack due to the serial processing of TCP DNS queries. An attacker can exploit this flaw by keeping a TCP connection open indefinitely, causing the server to become unresponsive and resulting in other DNS queries timing out. This issue prevents legitimate users from accessing DNS services, thereby disrupting normal operations and causing service downtime.
🎖@cveNotify