🚨 CVE-2025-60468
GPAC Multimedia Open Source Project GPAC Project/MP4Box 2.5-DEV-rev1593-gfe88c3545-master is affected by: Buffer Overflow. The impact is: cause a denial of service (local). The component is: filter_core/filter_pid.c (L:574-580): function gf_filter_pid_inst_swap_delete_task() improperly accesses freed objects during PID instance swap/delete cleanup, leading to heap use-after-free. The attack vector is: Local (AV:L): a local, authenticated user who processes a specially crafted MPEG-2 TS/MP4 file with MP4Box can trigger the bug during filter teardown (PID instance swap/delete), causing a crash. ¶¶ In GPAC s MP4Box, gf_filter_pid_inst_swap_delete_task() in filter_core/filter_pid.c may dereference objects after they have been freed when cleaning up PID instances after a swap/delete operation. Crafted inputs (e.g., malformed MPEG-2 TS) can trigger a heap use-after-free and crash; exploitation may be possible.

🎖@cveNotify

🚨 CVE-2026-10043
MosaicML Composer Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of MosaicML Composer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.

The specific flaw exists within the parsing of checkpoints. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27990.

🎖@cveNotify

🚨 CVE-2026-10642
The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts.

🎖@cveNotify

🚨 CVE-2026-2050
GIMP HDR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.

The specific flaw exists within the parsing of HDR files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28266.

🎖@cveNotify

🚨 CVE-2026-39893
Cacti is an open source performance and fault management framework. In versions 1.2.30 and prior, the rfilter request variable was concatenated into a RLIKE SQL clause without sanitization. The endpoint does not require authentication (graph viewing supports guest access via the configured guest user), so the SQLi was reachable pre-auth on installs with guest viewing enabled. This issue was fixed in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-39894
Cacti is an open source performance and fault management framework. In versions 1.2.30 and below, the locale-dependent decimal formatting in rrdtool_function_update() can corrupt RRDtool metric values. The rrdtool_function_update() function checks metric values with is_numeric() and concatenates them into the RRDtool update command via PHP string interpolation. PHP's string cast of floats is locale-sensitive: if LC_NUMERIC uses comma as decimal separator (e.g., de_DE), a value of 1.5 becomes "1,5". RRDtool expects . as decimal separator, causing metric data to shift into wrong columns or be silently dropped. No setlocale() reset is present in the update path. This causes a data integrity issue, but is not remotely exploitable; it requires server locale misconfiguration. The issue has been fixed in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-39897
Cacti is an open source performance and fault management framework. Versions 1.2.30 and below contain a Reflected XSS vulnerability in the html_auth_footer. This issue has been fixed in version 1.2.31.

🎖@cveNotify

🚨 CVE-2026-47110
Tiptap for PHP before version 2.1.1 contains an input validation vulnerability that allows authenticated attackers to cause a denial of service by submitting Tiptap JSON with the attrs.href field set to an array instead of a string, causing an unhandled TypeError in the Link::isAllowedUri() function when passed to preg_match(). Attackers can persist malformed JSON records that permanently crash the server-side HTML rendering pipeline for all subsequent viewers of that record until the database entry is manually repaired.

🎖@cveNotify

🚨 CVE-2026-49979
Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 1.99, the POST /api/v1/admin/send-test-email endpoint accepts attacker-controlled smtpHost and smtpPort values and establishes a raw JavaMail TCP connection without any IP validation. This completely bypasses WebClientUtils.IP_CHECK_FILTER, which only applies to Spring WebClient HTTP requests. Additionally, the raw MailException.getMessage() is returned verbatim in the API error response, enabling error-based internal port scanning and service banner enumeration. This vulnerability is fixed in 1.99.

🎖@cveNotify

🚨 CVE-2026-50189
Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, Appsmith's bundled supervisord exposes an XML-RPC interface on port 9001, reachable from outside the container via a Caddy reverse-proxy route at /supervisor/* on the public ingress. Combined with the APPSMITH_SUPERVISOR_PASSWORD exposed via GET /api/v1/admin/env, any authenticated administrator can send arbitrary XML-RPC calls to supervisord and execute OS commands inside the Docker container via twiddler.addProgramToGroup. This vulnerability is fixed in 2.1.

🎖@cveNotify

🚨 CVE-2026-50551
SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, SiYuan contains a stored cross-site scripting (XSS) vulnerability in the Attribute View (database) asset cell renderer that escalates to remote code execution (RCE) in the Electron desktop client. This vulnerability is fixed in 3.7.0.

🎖@cveNotify

🚨 CVE-2026-52794
Sentry is an error tracking and performance monitoring tool. From 24.4.0 until 26.5.2, a Regular Expression Denial of Service (ReDoS) vulnerability exists in Sentry's event ingestion pipeline, where a regex applied to attacker-controlled fields on incoming events can be made to consume disproportionate CPU time. This vulnerability is fixed in 26.5.2.

🎖@cveNotify

🚨 CVE-2026-53765
Chrome DevTools for agents (chrome-devtools-mcp) lets your coding agent control and inspect a live Chrome browser. From 0.20.0 until 1.1.0, The chrome-devtools-mcp daemon writes its PID file with fs.writeFileSync() to a deterministic runtime path. On typical macOS environments, and on Linux sessions where $XDG_RUNTIME_DIR is unset, that runtime path falls back to /tmp/chrome-devtools-mcp-<uid>/daemon.pid. Because the write does not use O_NOFOLLOW, a local low-privilege user on the same POSIX host can pre-create /tmp/chrome-devtools-mcp-<victim_uid>/daemon.pid as a symlink to a file writable by the victim. When the victim later starts daemon mode, fs.writeFileSync() follows the symlink and truncates the target file to the daemon PID string. This vulnerability is fixed in 1.1.0.

🎖@cveNotify

🚨 CVE-2026-53766
Chrome DevTools for agents (chrome-devtools-mcp) lets your coding agent control and inspect a live Chrome browser. From 0.24.0 until 1.1.0, McpContext.validatePath() enforces workspace roots by checking whether path.resolve(filePath) textually falls under one of the configured root paths. path.resolve() does not canonicalize symbolic links. As a result, a symlink inside a configured workspace root can point to a file outside that root, pass validation, and then be followed by downstream file read/write operations. This bypass applies even when the MCP client correctly declares the roots capability with a non-empty list. It is separate from the documented legacy behavior where missing roots capability allows all paths. The practical impact is a workspace-boundary bypass. In the write direction, filePath-writing tools can overwrite out-of-root files through an in-root symlink. In the read direction, upload_file can read through the symlink and send the file to the currently selected web page. This vulnerability is fixed in 1.1.0.

🎖@cveNotify

🚨 CVE-2026-54066
SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, the patch for CVE-2026-41894 ("Path Traversal via Double URL Encoding") sanitized the /export/ route but the identical root cause remains in the /assets/*path route. In publish mode (anonymous read-only HTTP endpoint, default port 6808), an unauthenticated remote attacker can read arbitrary files inside WorkspaceDir — including conf/conf.json (which contains the AccessAuthCode SHA256 hash, API token, and sync keys), temp/siyuan.db, temp/blocktree.db, and siyuan.log — by double-URL-encoding .. segments. This vulnerability is fixed in 3.7.0.

🎖@cveNotify

🚨 CVE-2026-54067
SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, CSS snippet body containing </style> breaks out of its surrounding <style> tag when renderSnippet() interpolates it via insertAdjacentHTML. A payload like runs arbitrary JavaScript in the renderer. On Electron desktop builds the renderer runs with nodeIntegration:true, so require('child_process') is reachable from the injected handler and the XSS chains to host RCE. Snippets sync via the workspace repository, so an attacker with write access to any synced workspace plants the payload once and it fires on every device that pulls. The bug also bypasses the user's enabledCSS / enabledJS separation. A user who turned enabledJS off was making a deliberate call not to run untrusted JavaScript; the CSS path runs it anyway. This vulnerability is fixed in 3.7.0.

🎖@cveNotify

🚨 CVE-2026-54068
SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, the /api/icon/getDynamicIcon endpoint is explicitly excluded from authentication in SiYuan's kernel router (router.go, "不需要鉴权" -- no auth needed). When called with type=8 and a valid block id parameter, this endpoint invokes RenderDynamicIconContentTemplate, which executes a Go template that includes the querySQL and queryBlocks functions. These functions run arbitrary SELECT statements against the SiYuan SQLite database. An unauthenticated network-adjacent attacker who knows a valid block ID can exfiltrate all user note content, tags, asset references, and block attributes from the database. This vulnerability is fixed in 3.7.0.

🎖@cveNotify

🚨 CVE-2026-54069
SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, SiYuan Note's kernel HTTP server unconditionally trusts all chrome-extension:// origins, granting RoleAdministrator access to every installed browser extension without any authentication. Combined with the default empty AccessAuthCode on desktop installs, any Chrome/Chromium extension -- including a compromised legitimate extension via supply chain attack -- can make fully authenticated admin API calls to the SiYuan kernel at 127.0.0.1:6806, enabling data exfiltration, stored XSS injection, and configuration tampering. This vulnerability is fixed in 3.7.0.

🎖@cveNotify

🚨 CVE-2026-54070
SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, renderPackageREADME in kernel/bazaar/readme.go renders a Bazaar package README from Markdown to HTML with the lute engine and SetSanitize(true). The lute sanitizer is an event-handler blocklist: allowAttr rejects only attribute names present in a fixed eventAttrs map copied from the w3schools legacy handler list. That map omits modern event handlers. onpointerover, onpointerdown, onauxclick, onbeforetoggle, onfocusin, onanimationstart, and ontransitionend are not in the list, so the sanitizer passes them through verbatim on any tag. The frontend assigns the rendered HTML to mdElement.innerHTML in app/src/config/bazaar.ts with no client-side DOMPurify on this path, into a normal element in the main document (no iframe, no sandbox). The kernel sends no Content-Security-Policy, X-Frame-Options, or X-Content-Type-Options header on any response, so an inline handler runs when its event fires. The README is rendered when an Administrator opens a package in Settings → Marketplace, after the one-time marketplace trust consent. Install is not required. Result: a third-party Bazaar package author runs JavaScript in the Administrator's authenticated SiYuan origin when the Administrator views and interacts with the package listing, and gains full control of the workspace. This vulnerability is fixed in 3.7.0.

🎖@cveNotify

🚨 CVE-2026-54158
SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, the attribute-view (database) cell renderer genAVValueHTML interpolates cell content raw in four of its branches: text, url, phone, and mAsset. A cell value like </textarea><img src=x onerror="..."> or "><img src=x onerror="..."> breaks out of its surrounding tag and runs arbitrary JavaScript in the renderer when the victim opens the block-attribute panel. On Electron desktop the renderer runs with nodeIntegration:true, so the XSS chains to host RCE via require('child_process'). AV files live under the workspace and ride normal sync, so an attacker with write access to any synced workspace plants the payload once and it fires on every device that opens a panel containing that row.he kernel doesn't escape on the way in either, so the malicious cell persists byte-for-byte. There's no equivalent of the html.EscapeAttrVal call that protects block IAL attributes at kernel/model/blockial.go:261. This vulnerability is fixed in 3.7.0.

🎖@cveNotify

🚨 CVE-2026-55454
Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, the bundled Caddy reverse-proxy's admin API — which has no authentication by default — is bound on 0.0.0.0:2019 inside the container. While this listener is not directly published to the host by docker-compose.yml, it is reachable from the Appsmith server process itself or a SSRF vulnerability. An authenticated low-privileged user can therefore drive the SSRF to issue POST /load (or any other admin-API call) against http://0.0.0.0:2019/, fully replacing the live Caddy configuration and taking over the reverse proxy. This vulnerability is fixed in 2.1.

🎖@cveNotify