🚨 CVE-2026-53038
In the Linux kernel, the following vulnerability has been resolved:

ima_fs: Correctly create securityfs files for unsupported hash algos

ima_tpm_chip->allocated_banks[i].crypto_id is initialized to
HASH_ALGO__LAST if the TPM algorithm is not supported. However there
are places relying on the algorithm to be valid because it is accessed
by hash_algo_name[].

On 6.12.40 I observe the following read out-of-bounds in hash_algo_name:
==================================================================
BUG: KASAN: global-out-of-bounds in create_securityfs_measurement_lists+0x396/0x440
Read of size 8 at addr ffffffff83e18138 by task swapper/0/1

CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #3
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x90
print_report+0xc4/0x580
? kasan_addr_to_slab+0x26/0x80
? create_securityfs_measurement_lists+0x396/0x440
kasan_report+0xc2/0x100
? create_securityfs_measurement_lists+0x396/0x440
create_securityfs_measurement_lists+0x396/0x440
ima_fs_init+0xa3/0x300
ima_init+0x7d/0xd0
init_ima+0x28/0x100
do_one_initcall+0xa6/0x3e0
kernel_init_freeable+0x455/0x740
kernel_init+0x24/0x1d0
ret_from_fork+0x38/0x80
ret_from_fork_asm+0x11/0x20
</TASK>

The buggy address belongs to the variable:
hash_algo_name+0xb8/0x420

Memory state around the buggy address:
ffffffff83e18000: 00 01 f9 f9 f9 f9 f9 f9 00 01 f9 f9 f9 f9 f9 f9
ffffffff83e18080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffff83e18100: 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 00 05 f9 f9
^
ffffffff83e18180: f9 f9 f9 f9 00 00 00 00 00 00 00 04 f9 f9 f9 f9
ffffffff83e18200: 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 f9
==================================================================

Seems like the TPM chip supports sha3_256, which isn't yet in
tpm_algorithms:
tpm tpm0: TPM with unsupported bank algorithm 0x0027

That's TPM_ALG_SHA3_256 == 0x0027 from "Trusted Platform Module 2.0
Library Part 2: Structures", page 51 [1].
See also the related U-Boot algorithms update [2].

Thus solve the problem by creating a file name with "_tpm_alg_<ID>"
postfix if the crypto algorithm isn't initialized.

This is how it looks on the test machine (patch ported to v6.12 release):
# ls -1 /sys/kernel/security/ima/
ascii_runtime_measurements
ascii_runtime_measurements_tpm_alg_27
ascii_runtime_measurements_sha1
ascii_runtime_measurements_sha256
binary_runtime_measurements
binary_runtime_measurements_tpm_alg_27
binary_runtime_measurements_sha1
binary_runtime_measurements_sha256
policy
runtime_measurements_count
violations

[1]: https://trustedcomputinggroup.org/wp-content/uploads/Trusted-Platform-Module-2.0-Library-Part-2-Version-184_pub.pdf
[2]: https://lists.denx.de/pipermail/u-boot/2024-July/558835.html

🎖@cveNotify

🚨 CVE-2026-53039
In the Linux kernel, the following vulnerability has been resolved:

ocfs2: validate group add input before caching

[BUG]
OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in
ocfs2_set_new_buffer_uptodate():

kernel BUG at fs/ocfs2/uptodate.c:509!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509
Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df
Call Trace:
ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507
ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7bbfb55a966d

[CAUSE]
ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a
user-controlled group block before ocfs2_verify_group_and_input()
validates that block number. That helper is only valid for newly
allocated metadata and asserts that the block is not already present in
the chosen metadata cache. The code also uses INODE_CACHE(inode) even
though the group descriptor belongs to main_bm_inode and later journal
accesses use that cache context instead.

[FIX]
Validate the on-disk group descriptor before caching it, then add it to
the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the
validation failure path separate from the later cleanup path so we only
remove the buffer from that cache after it has actually been inserted.
This keeps the group buffer lifetime consistent across validation,
journaling, and cleanup.

🎖@cveNotify

🚨 CVE-2026-53040
In the Linux kernel, the following vulnerability has been resolved:

ocfs2: validate bg_bits during freefrag scan

[BUG]
A crafted filesystem can trigger an out-of-bounds bitmap walk when
OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.

BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186 [inline]
kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200
__kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
test_bit_le include/asm-generic/bitops/le.h:21 [inline]
ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828
ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
...

[CAUSE]
ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the
bitmap scan limit. The coherent path reads group descriptors through
ocfs2_read_group_descriptor(), which validates the descriptor before
use. The non-coherent path uses ocfs2_read_blocks_sync() instead and
skips that validation, so an impossible bg_bits value can drive the
bitmap walk past the end of the block.

[FIX]
Compute the bitmap capacity from the filesystem format with
ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds
that limit, and clamp the scan to the computed capacity. This keeps the
freefrag report going while avoiding reads beyond the buffer.

🎖@cveNotify

🚨 CVE-2026-53042
In the Linux kernel, the following vulnerability has been resolved:

fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal

CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so
`cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls
`fwctl_register()` and then `device_add()`, fwctl_class is not yet
registered because fwctl_init() hasn't run, causing `class_to_subsys()` to
return NULL and skip knode_class initialization.

On device removal, `class_to_subsys()` returns non-NULL, and
`device_del()` calls `klist_del()` on the uninitialized knode, triggering
a NULL pointer dereference.

🎖@cveNotify

🚨 CVE-2026-53043
In the Linux kernel, the following vulnerability has been resolved:

ocfs2/dlm: validate qr_numregions in dlm_match_regions()

Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()".

In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION
network message is used to drive loops over the qr_regions buffer without
sufficient validation. This series fixes two issues:

- Patch 1 adds a bounds check to reject messages where qr_numregions
exceeds O2NM_MAX_REGIONS. The o2net layer only validates message
byte length; it does not constrain field values, so a crafted message
can set qr_numregions up to 255 and trigger out-of-bounds reads past
the 1024-byte qr_regions buffer.

- Patch 2 fixes an off-by-one in the local-vs-remote comparison loop,
which uses '<=' instead of '<', reading one entry past the valid range
even when qr_numregions is within bounds.


This patch (of 2):

The qr_numregions field from a DLM_QUERY_REGION network message is used
directly as loop bounds in dlm_match_regions() without checking against
O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS
(32) entries, a crafted message with qr_numregions > 32 causes
out-of-bounds reads past the qr_regions buffer.

Add a bounds check for qr_numregions before entering the loops.

🎖@cveNotify

🚨 CVE-2026-53044
In the Linux kernel, the following vulnerability has been resolved:

soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables

Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could
cause out-of-bounds access during target timeout lookup.

🎖@cveNotify

🚨 CVE-2026-53045
In the Linux kernel, the following vulnerability has been resolved:

memory: tegra124-emc: Fix dll_change check

The code checking whether the specified memory timing enables DLL
in the EMRS register was reversed. DLL is enabled if bit A0 is low.
Fix the check.

🎖@cveNotify

🚨 CVE-2026-53046
In the Linux kernel, the following vulnerability has been resolved:

ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine

ksmbd_crypt_message() sets a NULL completion callback on AEAD requests
and does not handle the -EINPROGRESS return code from async hardware
crypto engines like the Qualcomm Crypto Engine (QCE). When QCE returns
-EINPROGRESS, ksmbd treats it as an error and immediately frees the
request while the hardware DMA operation is still in flight. The DMA
completion callback then dereferences freed memory, causing a NULL
pointer crash:

pc : qce_skcipher_done+0x24/0x174
lr : vchan_complete+0x230/0x27c
...
el1h_64_irq+0x68/0x6c
ksmbd_free_work_struct+0x20/0x118 [ksmbd]
ksmbd_exit_file_cache+0x694/0xa4c [ksmbd]

Use the standard crypto_wait_req() pattern with crypto_req_done() as
the completion callback, matching the approach used by the SMB client
in fs/smb/client/smb2ops.c. This properly handles both synchronous
engines (immediate return) and async engines (-EINPROGRESS followed
by callback notification).

🎖@cveNotify

🚨 CVE-2026-53047
In the Linux kernel, the following vulnerability has been resolved:

efi/capsule-loader: fix incorrect sizeof in phys array reallocation

The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses
sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be
causing an undersized allocation.

The allocation is also inconsistent with the initial array allocation in
efi_capsule_open() that allocates one entry with sizeof(phys_addr_t),
and the efi_capsule_write() function that stores phys_addr_t values (not
pointers) via page_to_phys().

On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this
goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but
pointers are 32-bit, this allocates half the required space, which might
lead to a heap buffer overflow when storing physical addresses.

This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader:
fix incorrect allocation size") which fixed the same issue at the initial
allocation site.

🎖@cveNotify

🚨 CVE-2026-53048
In the Linux kernel, the following vulnerability has been resolved:

gfs2: prevent NULL pointer dereference during unmount

When flushing out outstanding glock work during an unmount, gfs2_log_flush()
can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc
is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in
gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it
missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that.

🎖@cveNotify

🚨 CVE-2026-53049
In the Linux kernel, the following vulnerability has been resolved:

gfs2: add some missing log locking

Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(),
gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock,
but these functions require exclusion against concurrent transactions.

To fix that, add a non-locking __gfs2_log_flush() function. Then, in
gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log
flushing functions and __gfs2_log_flush().

🎖@cveNotify

🚨 CVE-2026-53050
In the Linux kernel, the following vulnerability has been resolved:

quota: Fix race of dquot_scan_active() with quota deactivation

dquot_scan_active() can race with quota deactivation in
quota_release_workfn() like:

CPU0 (quota_release_workfn) CPU1 (dquot_scan_active)
============================== ==============================
spin_lock(&dq_list_lock);
list_replace_init(
&releasing_dquots, &rls_head);
/* dquot X on rls_head,
dq_count == 0,
DQ_ACTIVE_B still set */
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
spin_lock(&dq_list_lock);
list_for_each_entry(dquot,
&inuse_list, dq_inuse) {
/* finds dquot X */
dquot_active(X) -> true
atomic_inc(&X->dq_count);
}
spin_unlock(&dq_list_lock);
spin_lock(&dq_list_lock);
dquot = list_first_entry(&rls_head);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));

The problem is not only a cosmetic one as under memory pressure the
caller of dquot_scan_active() can end up working on freed dquot.

Fix the problem by making sure the dquot is removed from releasing list
when we acquire a reference to it.

🎖@cveNotify

🚨 CVE-2026-53051
In the Linux kernel, the following vulnerability has been resolved:

PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on

When PERST# is deasserted twice (assert -> deassert -> assert -> deassert),
a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc
(PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify()
and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers
on the controller core.

The call chain that causes the timeout:

pex_ep_event_pex_rst_deassert()
pci_epc_deinit_notify()
pci_epf_test_epc_deinit()
pci_epf_test_clear_bar()
pci_epc_clear_bar()
dw_pcie_ep_clear_bar()
__dw_pcie_ep_reset_bar()
dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register
reset_control_deassert(pcie->core_rst) <- Core powered on HERE

The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only
accessible after the controller core is powered on via
reset_control_deassert(pcie->core_rst). Accessing them before this point
results in a CBB timeout because the hardware is not yet operational.

Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to
after reset_control_deassert(pcie->core_rst), ensuring the controller is
fully powered on before any DBI register accesses occur.

🎖@cveNotify

🚨 CVE-2026-53052
In the Linux kernel, the following vulnerability has been resolved:

ASoC: qcom: qdsp6: topology: check widget type before accessing data

Check widget type before accessing the private data, as this could a
virtual widget which is no associated with a dsp graph, container and
module. Accessing witout check could lead to incorrect memory access.

🎖@cveNotify

🚨 CVE-2026-53053
In the Linux kernel, the following vulnerability has been resolved:

iommu/amd: Fix clone_alias() to use the original device's devid

Currently clone_alias() assumes first argument (pdev) is always the
original device pointer. This function is called by
pci_for_each_dma_alias() which based on topology decides to send
original or alias device details in first argument.

This meant that the source devid used to look up and copy the DTE
may be incorrect, leading to wrong or stale DTE entries being
propagated to alias device.

Fix this by passing the original pdev as the opaque data argument to
both the direct clone_alias() call and pci_for_each_dma_alias(). Inside
clone_alias(), retrieve the original device from data and compute devid
from it.

🎖@cveNotify

🚨 CVE-2026-53054
In the Linux kernel, the following vulnerability has been resolved:

drm/msm: Fix VM_BIND UNMAP locking

Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.

Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.

Patchwork: https://patchwork.freedesktop.org/patch/713898/

🎖@cveNotify

🚨 CVE-2026-53055
In the Linux kernel, the following vulnerability has been resolved:

crypto: hisilicon/sec2 - prevent req used-after-free for sec

During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx.

🎖@cveNotify

🚨 CVE-2026-53056
In the Linux kernel, the following vulnerability has been resolved:

drm/msm/dpu: fix mismatch between power and frequency

During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops
the MMCX rail to MIN_SVS while the core clock frequency remains at its
original (highest) rate. When runtime resume re-enables the clock, this
may result in a mismatch between the rail voltage and the clock rate.

For example, in the DPU bind path, the sequence could be:
cpu0: dev_sync_state -> rpmhpd_sync_state
cpu1: dpu_kms_hw_init
timeline 0 ------------------------------------------------> t

After rpmhpd_sync_state, the voltage performance is no longer guaranteed
to stay at the highest level. During dpu_kms_hw_init, calling
dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to
fall to MIN_SVS while the core clock is still at its maximum frequency.
When the power is re-enabled, only the clock is enabled, leading to a
situation where the MMCX rail is at MIN_SVS but the core clock is at its
highest rate. In this state, the rail cannot sustain the clock rate,
which may cause instability or system crash.

Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend
to ensure the correct vote is restored when DPU resumes.

Patchwork: https://patchwork.freedesktop.org/patch/710077/

🎖@cveNotify

🚨 CVE-2026-53057
In the Linux kernel, the following vulnerability has been resolved:

iommu/riscv: Add IOTINVAL after updating DDT/PDT entries

Add riscv_iommu_iodir_iotinval() to perform required TLB and context cache
invalidations after updating DDT or PDT entries, as mandated by the RISC-V
IOMMU specification (Section 6.3.1 and 6.3.2).

🎖@cveNotify

🚨 CVE-2026-53058
In the Linux kernel, the following vulnerability has been resolved:

drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable()

In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read()
in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit
NULL pointer while trying to access the mutex. We need the connector to
be set before that. Unlike in legacy cases with flag
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised
in bridge_attach(), so add the mhdp->connector_ptr in device structure
to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and
!DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to
avoid possible NULL pointer dereference in recovery paths like
modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set.

🎖@cveNotify

🚨 CVE-2026-53059
In the Linux kernel, the following vulnerability has been resolved:

dm log: fix out-of-bounds write due to region_count overflow

The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.

Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.

This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:

dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'

The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):

$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...

This leads to a kernel crash in core_in_sync:

BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!

Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.

🎖@cveNotify