🚨 CVE-2026-52996
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open
ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount
incremented via ksmbd_fp_get(). parse_durable_handle_context() in
the DURABLE_REQ_V2 case properly releases this reference on every
path inside the ClientGUID-match branch, either by calling
ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp
for a successful reconnect. However, when an entry exists in the
global file table with the same CreateGuid but a different
ClientGUID, the code simply falls through to the new-open path
without dropping the reference obtained from ksmbd_lookup_fd_cguid().
Per MS-SMB2 section 3.3.5.9.10 ("Handling the
SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server
MUST locate an Open whose Open.CreateGuid matches the request's
CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the
connection that received the request. If no such Open is found, the
server MUST continue with the normal open execution phase. A
CreateGuid hit with a ClientGUID mismatch is therefore the
"Open not found" case: proceeding with a new open is correct, but
the reference obtained purely as a side effect of the lookup must
not be leaked.
Repeated requests that hit this mismatch pin global_ft entries,
prevent __ksmbd_close_fd() from ever running for the corresponding
files, and defeat the durable scavenger, leading to long-lived
resource leaks.
Release the reference in the mismatch path and clear dh_info->fp so
subsequent logic does not mistake a non-matching lookup result for
a reconnect target.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open
ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount
incremented via ksmbd_fp_get(). parse_durable_handle_context() in
the DURABLE_REQ_V2 case properly releases this reference on every
path inside the ClientGUID-match branch, either by calling
ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp
for a successful reconnect. However, when an entry exists in the
global file table with the same CreateGuid but a different
ClientGUID, the code simply falls through to the new-open path
without dropping the reference obtained from ksmbd_lookup_fd_cguid().
Per MS-SMB2 section 3.3.5.9.10 ("Handling the
SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server
MUST locate an Open whose Open.CreateGuid matches the request's
CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the
connection that received the request. If no such Open is found, the
server MUST continue with the normal open execution phase. A
CreateGuid hit with a ClientGUID mismatch is therefore the
"Open not found" case: proceeding with a new open is correct, but
the reference obtained purely as a side effect of the lookup must
not be leaked.
Repeated requests that hit this mismatch pin global_ft entries,
prevent __ksmbd_close_fd() from ever running for the corresponding
files, and defeat the durable scavenger, leading to long-lived
resource leaks.
Release the reference in the mismatch path and clear dh_info->fp so
subsequent logic does not mistake a non-matching lookup result for
a reconnect target.
🎖@cveNotify
🚨 CVE-2026-52997
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_dualpi2: drain both C-queue and L-queue in dualpi2_change()
Fix dualpi2_change() to correctly enforce updated limit and memlimit
values after a configuration change of the dualpi2 qdisc.
Before this patch, dualpi2_change() always attempted to dequeue packets
via the root qdisc (C-queue) when reducing backlog or memory usage, and
unconditionally assumed that a valid skb will be returned. When traffic
classification results in packets being queued in the L-queue while the
C-queue is empty, this leads to a NULL skb dereference during limit or
memlimit enforcement.
This is fixed by first dequeuing from the C-queue path if it is
non-empty. Once the C-queue is empty, packets are dequeued directly from
the L-queue. Return values from qdisc_dequeue_internal() are checked for
both queues. When dequeuing from the L-queue, the parent qdisc qlen and
backlog counters are updated explicitly to keep overall qdisc statistics
consistent.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_dualpi2: drain both C-queue and L-queue in dualpi2_change()
Fix dualpi2_change() to correctly enforce updated limit and memlimit
values after a configuration change of the dualpi2 qdisc.
Before this patch, dualpi2_change() always attempted to dequeue packets
via the root qdisc (C-queue) when reducing backlog or memory usage, and
unconditionally assumed that a valid skb will be returned. When traffic
classification results in packets being queued in the L-queue while the
C-queue is empty, this leads to a NULL skb dereference during limit or
memlimit enforcement.
This is fixed by first dequeuing from the C-queue path if it is
non-empty. Once the C-queue is empty, packets are dequeued directly from
the L-queue. Return values from qdisc_dequeue_internal() are checked for
both queues. When dequeuing from the L-queue, the parent qdisc qlen and
backlog counters are updated explicitly to keep overall qdisc statistics
consistent.
🎖@cveNotify
🚨 CVE-2026-52998
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check
The nf_osf_ttl() function accessed skb->dev to perform a local interface
address lookup without verifying that the device pointer was valid.
Additionally, the implementation utilized an in_dev_for_each_ifa_rcu
loop to match the packet source address against local interface
addresses. It assumed that packets from the same subnet should not see a
decrement on the initial TTL. A packet might appear it is from the same
subnet but it actually isn't especially in modern environments with
containers and virtual switching.
Remove the device dereference and interface loop. Replace the logic with
a switch statement that evaluates the TTL according to the ttl_check.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check
The nf_osf_ttl() function accessed skb->dev to perform a local interface
address lookup without verifying that the device pointer was valid.
Additionally, the implementation utilized an in_dev_for_each_ifa_rcu
loop to match the packet source address against local interface
addresses. It assumed that packets from the same subnet should not see a
decrement on the initial TTL. A packet might appear it is from the same
subnet but it actually isn't especially in modern environments with
containers and virtual switching.
Remove the device dereference and interface loop. Replace the logic with
a switch statement that evaluates the TTL according to the ttl_check.
🎖@cveNotify
🚨 CVE-2026-53000
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook.
🎖@cveNotify
🚨 CVE-2026-53001
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xtables: restrict several matches to inet family
This is a partial revert of:
commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")
to allow ipv4 and ipv6 only.
- xt_mac
- xt_owner
- xt_physdev
These extensions are not used by ebtables in userspace.
Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4
specific.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xtables: restrict several matches to inet family
This is a partial revert of:
commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")
to allow ipv4 and ipv6 only.
- xt_mac
- xt_owner
- xt_physdev
These extensions are not used by ebtables in userspace.
Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4
specific.
🎖@cveNotify
🚨 CVE-2026-53002
In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: remove sprintf usage
Replace it with scnprintf, the buffer sizes are expected to be large enough
to hold the result, no need for snprintf+overflow check.
Increase buffer size in mangle_content_len() while at it.
BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270
Write of size 1 at addr [..]
vsnprintf+0xea5/0x1270
sprintf+0xb1/0xe0
mangle_content_len+0x1ac/0x280
nf_nat_sdp_session+0x1cc/0x240
process_sdp+0x8f8/0xb80
process_invite_request+0x108/0x2b0
process_sip_msg+0x5da/0xf50
sip_help_tcp+0x45e/0x780
nf_confirm+0x34d/0x990
[..]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: remove sprintf usage
Replace it with scnprintf, the buffer sizes are expected to be large enough
to hold the result, no need for snprintf+overflow check.
Increase buffer size in mangle_content_len() while at it.
BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270
Write of size 1 at addr [..]
vsnprintf+0xea5/0x1270
sprintf+0xb1/0xe0
mangle_content_len+0x1ac/0x280
nf_nat_sdp_session+0x1cc/0x240
process_sdp+0x8f8/0xb80
process_invite_request+0x108/0x2b0
process_sip_msg+0x5da/0xf50
sip_help_tcp+0x45e/0x780
nf_confirm+0x34d/0x990
[..]
🎖@cveNotify
🚨 CVE-2026-53003
In the Linux kernel, the following vulnerability has been resolved:
pppoe: drop PFC frames
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the current PPPoE driver assumes an
uncompressed (2-byte) protocol field. However, the generic PPP layer
function ppp_input() is not aware of the negotiation result, and still
accepts PFC frames.
If a peer with a broken implementation or an attacker sends a frame with
a compressed (1-byte) protocol field, the subsequent PPP payload is
shifted by one byte. This causes the network header to be 4-byte
misaligned, which may trigger unaligned access exceptions on some
architectures.
To reduce the attack surface, drop PPPoE PFC frames. Introduce
ppp_skb_is_compressed_proto() helper function to be used in both
ppp_generic.c and pppoe.c to avoid open-coding.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
pppoe: drop PFC frames
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the current PPPoE driver assumes an
uncompressed (2-byte) protocol field. However, the generic PPP layer
function ppp_input() is not aware of the negotiation result, and still
accepts PFC frames.
If a peer with a broken implementation or an attacker sends a frame with
a compressed (1-byte) protocol field, the subsequent PPP payload is
shifted by one byte. This causes the network header to be 4-byte
misaligned, which may trigger unaligned access exceptions on some
architectures.
To reduce the attack surface, drop PPPoE PFC frames. Introduce
ppp_skb_is_compressed_proto() helper function to be used in both
ppp_generic.c and pppoe.c to avoid open-coding.
🎖@cveNotify
🚨 CVE-2026-53004
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks
sctp_getsockopt_peer_auth_chunks() checks that the caller's optval
buffer is large enough for the peer AUTH chunk list with
if (len < num_chunks)
return -EINVAL;
but then writes num_chunks bytes to p->gauth_chunks, which lives
at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8
inside optval. The check is missing the sizeof(struct
sctp_authchunks) = 8-byte header. When the caller supplies
len == num_chunks (for any num_chunks > 0) the test passes but
copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes
past the declared buffer.
The sibling function sctp_getsockopt_local_auth_chunks() at the
next line already has the correct check:
if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
Align the peer variant with its sibling.
Reproducer confirms on v7.0-13-generic: an unprivileged userspace
caller that opens a loopback SCTP association with AUTH enabled,
queries num_chunks with a short optval, then issues the real
getsockopt with len == num_chunks and sentinel bytes painted past
the buffer observes those sentinel bytes overwritten with the
peer's AUTH chunk type. The bytes written are under the peer's
control but land in the caller's own userspace; this is not a
kernel memory corruption, but it is a kernel-side contract
violation that can silently corrupt adjacent userspace data.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks
sctp_getsockopt_peer_auth_chunks() checks that the caller's optval
buffer is large enough for the peer AUTH chunk list with
if (len < num_chunks)
return -EINVAL;
but then writes num_chunks bytes to p->gauth_chunks, which lives
at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8
inside optval. The check is missing the sizeof(struct
sctp_authchunks) = 8-byte header. When the caller supplies
len == num_chunks (for any num_chunks > 0) the test passes but
copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes
past the declared buffer.
The sibling function sctp_getsockopt_local_auth_chunks() at the
next line already has the correct check:
if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
Align the peer variant with its sibling.
Reproducer confirms on v7.0-13-generic: an unprivileged userspace
caller that opens a loopback SCTP association with AUTH enabled,
queries num_chunks with a short optval, then issues the real
getsockopt with len == num_chunks and sentinel bytes painted past
the buffer observes those sentinel bytes overwritten with the
peer's AUTH chunk type. The bytes written are under the peer's
control but land in the caller's own userspace; this is not a
kernel memory corruption, but it is a kernel-side contract
violation that can silently corrupt adjacent userspace data.
🎖@cveNotify
🚨 CVE-2026-53005
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Drop all SCM attributes for SOCKMAP.
SOCKMAP can hide inflight fd from AF_UNIX GC.
When a socket in SOCKMAP receives skb with inflight fd,
sk_psock_verdict_data_ready() looks up the mapped socket and
enqueue skb to its psock->ingress_skb.
Since neither the old nor the new GC can inspect the psock
queue, the hidden skb leaks the inflight sockets. Note that
this cannot be detected via kmemleak because inflight sockets
are linked to a global list.
In addition, SOCKMAP redirect breaks the Tarjan-based GC's
assumption that unix_edge.successor is always alive, which
is no longer true once skb is redirected, resulting in
use-after-free below. [0]
Moreover, SOCKMAP does not call scm_stat_del() properly,
so unix_show_fdinfo() could report an incorrect fd count.
sk_msg_recvmsg() does not support any SCM attributes in the
first place.
Let's drop all SCM attributes before passing skb to the
SOCKMAP layer.
[0]:
BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
Read of size 8 at addr ffff888125362670 by task kworker/56:1/496
CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379)
kasan_report (mm/kasan/report.c:597)
unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
unix_destroy_fpl (net/unix/garbage.c:317)
unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976)
sk_psock_backlog (./include/linux/skbuff.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
</TASK>
Allocated by task 955:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
__kasan_slab_alloc (mm/kasan/common.c:369)
kmem_cache_alloc_noprof (mm/slub.c:4539)
sk_prot_alloc (net/core/sock.c:2240)
sk_alloc (net/core/sock.c:2301)
unix_create1 (net/unix/af_unix.c:1099)
unix_create (net/unix/af_unix.c:1169)
__sock_create (net/socket.c:1606)
__sys_socketpair (net/socket.c:1811)
__x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860)
do_syscall_64 (arch/x86/entry/syscall_64.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 496:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kmem_cache_free (mm/slub.c:6165)
__sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384)
sk_psock_destroy (./include/net/sock.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Drop all SCM attributes for SOCKMAP.
SOCKMAP can hide inflight fd from AF_UNIX GC.
When a socket in SOCKMAP receives skb with inflight fd,
sk_psock_verdict_data_ready() looks up the mapped socket and
enqueue skb to its psock->ingress_skb.
Since neither the old nor the new GC can inspect the psock
queue, the hidden skb leaks the inflight sockets. Note that
this cannot be detected via kmemleak because inflight sockets
are linked to a global list.
In addition, SOCKMAP redirect breaks the Tarjan-based GC's
assumption that unix_edge.successor is always alive, which
is no longer true once skb is redirected, resulting in
use-after-free below. [0]
Moreover, SOCKMAP does not call scm_stat_del() properly,
so unix_show_fdinfo() could report an incorrect fd count.
sk_msg_recvmsg() does not support any SCM attributes in the
first place.
Let's drop all SCM attributes before passing skb to the
SOCKMAP layer.
[0]:
BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
Read of size 8 at addr ffff888125362670 by task kworker/56:1/496
CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379)
kasan_report (mm/kasan/report.c:597)
unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
unix_destroy_fpl (net/unix/garbage.c:317)
unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976)
sk_psock_backlog (./include/linux/skbuff.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
</TASK>
Allocated by task 955:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
__kasan_slab_alloc (mm/kasan/common.c:369)
kmem_cache_alloc_noprof (mm/slub.c:4539)
sk_prot_alloc (net/core/sock.c:2240)
sk_alloc (net/core/sock.c:2301)
unix_create1 (net/unix/af_unix.c:1099)
unix_create (net/unix/af_unix.c:1169)
__sock_create (net/socket.c:1606)
__sys_socketpair (net/socket.c:1811)
__x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860)
do_syscall_64 (arch/x86/entry/syscall_64.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 496:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kmem_cache_free (mm/slub.c:6165)
__sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384)
sk_psock_destroy (./include/net/sock.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
🎖@cveNotify
🚨 CVE-2026-53006
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in icmpv6_rcv()
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in icmpv6_rcv()
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call.
🎖@cveNotify
🚨 CVE-2026-53007
In the Linux kernel, the following vulnerability has been resolved:
ice: fix potential NULL pointer deref in error path of ice_set_ringparam()
ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without
clearing ICE_TX_RING_FLAGS_TXTIME bit.
When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent
ice_setup_tx_ring() call fails, a NULL pointer dereference could happen
in the unwinding sequence:
ice_clean_tx_ring()
-> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set)
-> ice_free_tx_tstamp_ring()
-> ice_free_tstamp_ring()
-> tstamp_ring->desc (NULL deref)
Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue.
Note that this potential issue is found by manual code review.
Compile test only since unfortunately I don't have E830 devices.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ice: fix potential NULL pointer deref in error path of ice_set_ringparam()
ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without
clearing ICE_TX_RING_FLAGS_TXTIME bit.
When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent
ice_setup_tx_ring() call fails, a NULL pointer dereference could happen
in the unwinding sequence:
ice_clean_tx_ring()
-> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set)
-> ice_free_tx_tstamp_ring()
-> ice_free_tstamp_ring()
-> tstamp_ring->desc (NULL deref)
Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue.
Note that this potential issue is found by manual code review.
Compile test only since unfortunately I don't have E830 devices.
🎖@cveNotify
🚨 CVE-2026-53008
In the Linux kernel, the following vulnerability has been resolved:
ice: fix race condition in TX timestamp ring cleanup
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ice: fix race condition in TX timestamp ring cleanup
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME
🎖@cveNotify
🚨 CVE-2026-53009
In the Linux kernel, the following vulnerability has been resolved:
ice: fix double-free of tx_buf skb
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ice: fix double-free of tx_buf skb
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any.
🎖@cveNotify
🚨 CVE-2026-53010
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_open during durable reconnect
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_open during durable reconnect
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns.
🎖@cveNotify
🚨 CVE-2026-53011
In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calculated end_time.
setup_first_end_time() sets the first entry's end_time to
base_time + interval when the schedule is installed, so the value
is already correct.
The deleted 'end_time = sched_base_time(admin)' assignment was also
harmful independently: it would overwrite the new first entry's
pre-calculated end_time with just base_time.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calculated end_time.
setup_first_end_time() sets the first entry's end_time to
base_time + interval when the schedule is installed, so the value
is already correct.
The deleted 'end_time = sched_base_time(admin)' assignment was also
harmful independently: it would overwrite the new first entry's
pre-calculated end_time with just base_time.
🎖@cveNotify
🚨 CVE-2026-53012
In the Linux kernel, the following vulnerability has been resolved:
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3
🎖@cveNotify
🚨 CVE-2026-53013
In the Linux kernel, the following vulnerability has been resolved:
macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF
macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but
macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1.
This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb
runs out of space, triggering a WARN_ON in rtnetlink and preventing the
interface from being dumped.
The bug can be reproduced with:
ip link add macvlan0 link eth0 type macvlan mode bridge
ip link set macvlan0 type macvlan bc_cutoff 0
ip -d link show macvlan0 # fails with -EMSGSIZE
The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add
netlink attribute for broadcast cutoff"), which added the nla_put_s32()
call in macvlan_fill_info() but missed adding the corresponding
nla_total_size(4) in macvlan_get_size(). A follow-up commit
55cef78c244d ("macvlan: add forgotten nla_policy for
IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still
did not fix the size calculation.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF
macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but
macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1.
This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb
runs out of space, triggering a WARN_ON in rtnetlink and preventing the
interface from being dumped.
The bug can be reproduced with:
ip link add macvlan0 link eth0 type macvlan mode bridge
ip link set macvlan0 type macvlan bc_cutoff 0
ip -d link show macvlan0 # fails with -EMSGSIZE
The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add
netlink attribute for broadcast cutoff"), which added the nla_put_s32()
call in macvlan_fill_info() but missed adding the corresponding
nla_total_size(4) in macvlan_get_size(). A follow-up commit
55cef78c244d ("macvlan: add forgotten nla_policy for
IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still
did not fix the size calculation.
🎖@cveNotify
🚨 CVE-2026-53014
In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir
In tcf_blockcast_redir(), when iterating block ports to redirect
packets to multiple devices, the mac_header_xmit flag is queried
from the wrong device. The loop sends to dev_prev but queries
dev_is_mac_header_xmit(dev) — which is the NEXT device in the
iteration, not the one being sent to.
This causes tcf_mirred_to_dev() to make incorrect decisions about
whether to push or pull the MAC header. When the block contains
mixed device types (e.g., an ethernet veth and a tunnel device),
intermediate devices get the wrong mac_header_xmit flag, leading to
skb header corruption. In the worst case, skb_push_rcsum with an
incorrect mac_len can exhaust headroom and panic.
The last device in the loop is handled correctly (line 365-366 uses
dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste
oversight for the intermediate devices.
Fix by using dev_prev instead of dev for the mac_header_xmit query,
consistent with the device actually being sent to.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir
In tcf_blockcast_redir(), when iterating block ports to redirect
packets to multiple devices, the mac_header_xmit flag is queried
from the wrong device. The loop sends to dev_prev but queries
dev_is_mac_header_xmit(dev) — which is the NEXT device in the
iteration, not the one being sent to.
This causes tcf_mirred_to_dev() to make incorrect decisions about
whether to push or pull the MAC header. When the block contains
mixed device types (e.g., an ethernet veth and a tunnel device),
intermediate devices get the wrong mac_header_xmit flag, leading to
skb header corruption. In the worst case, skb_push_rcsum with an
incorrect mac_len can exhaust headroom and panic.
The last device in the loop is handled correctly (line 365-366 uses
dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste
oversight for the intermediate devices.
Fix by using dev_prev instead of dev for the mac_header_xmit query,
consistent with the device actually being sent to.
🎖@cveNotify
🚨 CVE-2026-53015
In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com
🎖@cveNotify
🚨 CVE-2026-53016
In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
🎖@cveNotify
🚨 CVE-2026-53017
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed.
🎖@cveNotify