🚨 CVE-2026-56311
Capgo before 12.128.2 contains an authorization bypass vulnerability in the public.get_current_plan_max_org RPC function that allows unauthenticated attackers to retrieve arbitrary organization plan limits. Attackers can call the RPC endpoint with any organization UUID using only the public Supabase key to disclose billing information including MAU, bandwidth, storage, and build time limits for any organization.

🎖@cveNotify

🚨 CVE-2026-56326
Nuxt versions 4.0.0 before 4.4.7 and 3.x before 3.21.7 contain a server-side open redirect vulnerability in navigateTo that fails to properly validate path-normalized payloads like /..//evil.com and /.//evil.com. Attackers can bypass external-host checks using path-normalization techniques to redirect users to attacker-controlled sites via the Location header or meta-refresh, enabling phishing and OAuth authorization-code theft.

🎖@cveNotify

🚨 CVE-2026-56348
n8n before 2.20.0 contains a credential exfiltration vulnerability in the POST /rest/dynamic-node-parameters/options endpoint that allows authenticated users to bypass Allowed HTTP Request Domains restrictions. Attackers with credential access can cause the n8n server to issue HTTP requests with credentials to unauthorized hosts, exfiltrating sensitive authentication data.

🎖@cveNotify

🚨 CVE-2026-41523
vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.22.0, an assert-based security check in vLLM's activation function loading allows any unauthenticated attacker to achieve arbitrary code execution on the server by publishing a malicious HuggingFace model, when vLLM runs in Python optimized mode (python -O or PYTHONOPTIMIZE=1). This vulnerability is fixed in 0.22.0.

🎖@cveNotify

🚨 CVE-2026-47155
vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.22.0, vLLM's revision pinning controls do not consistently apply to all artifacts loaded for a model. A deployment that supplies --revision or --code-revision can still load dynamic code, GGUF files, image processors, retrieval side weights, or same-repository subfolder weights/config from an unpinned/default revision. This is a supply-chain integrity issue for pinned vLLM deployments. Operators can believe they are serving a reviewed model revision while vLLM resolves behavior-affecting nested or sibling artifacts outside that reviewed revision. This vulnerability is fixed in 0.22.0.

🎖@cveNotify

🚨 CVE-2026-54233
vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.23.1rc0, vLLM's /v1/audio/transcriptions endpoint limits compressed upload size but not decoded PCM output. A 25MB OPUS file expands to ~14.9GB of float32 PCM at decode time. This vulnerability is fixed in 0.23.1rc0.

🎖@cveNotify

🚨 CVE-2026-54235
vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.23.1rc0, ll temperature validation gates use comparison operators (<, >), which silently evaluate to False for NaN and for positive Infinity in Python's IEEE 754 float semantics. Both values pass every guard and propagate to GPU sampling kernels, where they produce undefined behavior or CUDA errors that can crash the inference worker. This vulnerability is fixed in 0.23.1rc0.

🎖@cveNotify

🚨 CVE-2026-54236
vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.23.1rc0, the fix for CVE-2026-22778, which introduced a sanitize_message helper that strips object-repr memory addresses from error messages before they reach the client, is incomplete: several response paths echo str(exc) directly to clients without calling sanitize_message. The unsanitized sites include the Anthropic API router in vllm/entrypoints/anthropic/api_router.py (the POST /v1/messages and POST /v1/messages/count_tokens handlers), the Server-Sent Events streaming converter in vllm/entrypoints/anthropic/serving.py, and the realtime speech-to-text WebSocket in vllm/entrypoints/speech_to_text/realtime/connection.py. These paths catch the exception inside the route coroutine and construct the JSONResponse themselves, bypassing the sanitizing global FastAPI exception handler, and WebSocket frames do not traverse that handler chain at all. Using the same primitive as the parent issue, an unauthenticated attacker can send malformed image bytes through the Anthropic Messages API image content parts so that PIL.Image.open raises an UnidentifiedImageError whose message contains the BytesIO object repr, leaking the heap memory address verbatim in the error.message field of the response body. This vulnerability is fixed in 0.23.1rc0.

🎖@cveNotify

🚨 CVE-2026-10645
Zephyr's ext2 directory-entry parser does not fully validate on-disk directory entry structure before copying the entry name and advancing traversal state. In ext2_fetch_direntry() (subsys/fs/ext2/ext2_diskops.c), the code only checks de_name_len <= EXT2_MAX_FILE_NAME and then copies the name with memcpy without validating the structural relationship between de_rec_len, de_name_len, and the directory block boundary (for example that de_rec_len is non-zero, at least the size of the entry header, and that the record fits within the block). Callers such as find_dir_entry() and ext2_get_direntry() (subsys/fs/ext2/ext2_impl.c) then advance traversal using the unvalidated de_rec_len. A crafted ext2 image can therefore cause an out-of-bounds read from the directory block buffer when a malformed entry near the end of a block triggers an oversized name copy, or a zero-progress infinite loop when de_rec_len == 0. The issue is not reached at mount time but later through directory traversal paths such as pathname lookup, stat/open/unlink/rename, and readdir. The primary impact is denial of service and out-of-bounds reads under attacker-controlled ext2 images mounted from untrusted media.

🎖@cveNotify

🚨 CVE-2026-10651
A malformed Bluetooth Classic SDP attribute can trigger a reachable assertion in Zephyr's SDP parser. In subsys/bluetooth/host/classic/sdp.c, bt_sdp_parse_attribute() accepts an input buffer once it contains the 1-byte attribute type and 2-byte attribute id, but then unconditionally pulls an additional byte for the value type without verifying that the byte is present. A truncated 3-byte attribute (for example 09 00 09) therefore reaches net_buf_simple_pull() with insufficient remaining length, triggering the __ASSERT_NO_MSG(buf->len >= len) check and a kernel panic in assert-enabled builds (denial of service). In builds where assertions are disabled, parsing may continue past the end of the available buffer, leading to an out-of-bounds read and undefined behavior.

🎖@cveNotify

🚨 CVE-2026-10658
A missing length validation in the Zephyr Bluetooth Host ISO receive path can be triggered by malformed HCI ISO data. In bt_iso_recv() (subsys/bluetooth/host/iso.c), when processing PB=START/SINGLE fragments, the code pulls a TS SDU header (8 bytes, ts=1) or a non-TS SDU header (4 bytes, ts=0) without first verifying that buf->len contains at least that many bytes. The outer HCI ISO length check in hci_iso() validates payload length consistency but not the minimum inner SDU header size, so a packet with payload length 1 passes hci_iso() and then reaches net_buf_pull_mem(), which asserts buf->len >= len. As a result, malformed ISO traffic deterministically triggers a kernel assert (denial of service) in assert-enabled builds, and in non-assert builds the same path may proceed with an undersized buffer, leading to out-of-bounds read behavior. The issue affects products using the Zephyr Host with CONFIG_BT_ISO_RX enabled, particularly where incoming HCI data can be influenced by a malicious or compromised controller or malformed forwarded ISO traffic.

🎖@cveNotify

🚨 CVE-2026-11833
Overview:
A vulnerability has been found in FAST/TOOLS and CI Server. The web server may return a response containing the CI Server setting information. This information could
be exploited by an attacker for other attacks.

The affected products and versions are as follows:

FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to R10.04

CI Server (All packages) R1.01 to R1.04

🎖@cveNotify

🚨 CVE-2026-55654
A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service.

🎖@cveNotify

🚨 CVE-2026-55655
A flaw was found in OpenSSH. A local unprivileged attacker on a Linux client host can hijack client-side X11 forwarding connections. This is possible by pre-binding the preferred abstract X socket name when X11 forwarding is enabled and a local UNIX-domain X socket is used. A successful attack can compromise the confidentiality of forwarded X11 traffic, including sensitive window contents and input, and may allow some manipulation of the forwarded session.

🎖@cveNotify

🚨 CVE-2026-12866
All versions of the package expr-eval are vulnerable to Code Execution via the toJSFunction() API. An attacker can execute arbitrary JavaScript by supplying crafted expressions that are compiled into native code using new Function(). Because user-controlled expressions are transformed directly into executable JavaScript, attackers can escape the intended expression sandbox and run arbitrary code within the application's context.

🎖@cveNotify

🚨 CVE-2026-7842
The Infility Global Infility Global WordPress plugin before 2.15.20 for WordPress does not sanitize or validate the orderby and order parameters in the import_list(), url_detail(), and file_detail() admin page callbacks before using them in SQL queries, allowing authenticated attackers with Editor-level access or higher to perform time-based blind SQL injection and extract sensitive data from the database. The ImportData module must be enabled via the Infility Global WordPress plugin before 2.15.20's module toggle page.

🎖@cveNotify

🚨 CVE-2026-8163
The Infility Global WordPress plugin before 2.15.19 does not properly sanitize and escape some parameters before using them in SQL statements, leading to a SQL Injection vulnerability exploitable by authenticated users with Subscriber-level access and above.

🎖@cveNotify

🚨 CVE-2026-8172
The Simple Basic Contact Form WordPress plugin through 20250114 does not escape user-supplied input before reflecting it into the contact form output on validation errors, leading to a Reflected Cross-Site Scripting vulnerability that unauthenticated attackers can exploit against site visitors via a crafted link or cross-site form submission.

🎖@cveNotify

🚨 CVE-2026-10521
An high privileged remote attacker can access a hidden configuration method, that should not be accessible by any user, to modify critical program parameters. This can result in a total loss of confidentiality, integrity and availability.

🎖@cveNotify

🚨 CVE-2026-11374
In ManageEngine ADSelfService Plus, RecoveryManager Plus, M365 Manager Plus, and ADAudit Plus, the SSO tickets generated to authenticate that session could be predicted
by an unauthenticated user, leading to account takeover.

🎖@cveNotify

🚨 CVE-2026-4983
Open VSX Registry does not sanitize SVG files uploaded as extension icons prior to storage, and serves them with Content-Type: image/svg+xml without security headers such as Content-Security-Policy or Content-Disposition: attachment. This allows an attacker to publish an extension with a malicious SVG icon and achieve stored cross-site scripting (XSS) when a user navigates directly to the icon URL.




On deployments using local storage, script execution occurs within the Open VSX application origin, enabling session hijacking, authentication token theft, and unauthorized extension publishing. On deployments backed by external storage (such as open-vsx.org with an S3-backed CDN), execution is confined to the storage origin, reducing impact but still permitting phishing attacks and credential harvesting through attacker-crafted pages.

🎖@cveNotify