🚨 CVE-2026-38716
InHand Networks IR912 V1.0.0.r20042 and IR915 V1.0.0.r20042 (including earlier versions) were discovered to contain a command injection vulnerability in the Python application export function. This vulnerability allows remote attackers to execute arbitrary commands as root via a crafted input.

🎖@cveNotify

🚨 CVE-2026-38717
InHand Networks IR912 V1.0.0.r20042 and IR915 V1.0.0.r20042 (including earlier versions) were discovered to contain a command injection vulnerability in the file upload function. The vulnerability allows remote attackers to execute arbitrary commands as root via a crafted input.

🎖@cveNotify

🚨 CVE-2026-48617
A flaw in Node.js Permission Model enforcement allows Bypass via `process.report.writeReport()` Path Misvalidation. This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.

🎖@cveNotify

🚨 CVE-2026-48984
pam_usb provides hardware authentication for Linux using ordinary removable media. In versions 0.9.1 and below, the xfree() memory release helper in calls free() without first zeroing the buffer contents, releasing heap-allocated buffers containing sensitive data — including one-time pad bytes read from disk — without clearing, leaving the sensitive content in freed heap memory until it happens to be overwritten by a subsequent allocation. On a system where a use-after-free condition exists, or where a heap inspection primitive becomes available, this could allow recovery of pad values or other authentication material from freed memory regions. This is a defence-in-depth requirement consistent with prior hardening work in this codebase (GHSA-vx6f-rrqr-j87c applied explicit_bzero to some pad paths; this issue generalises the pattern to the central deallocation helper).

🎖@cveNotify

🚨 CVE-2026-48985
pam_usb provides hardware authentication for Linux using ordinary removable media. In versions 0.9.1 and below, pusb_is_loginctl_local() can cause a NULL dereference crash when parsing loginctl output. The function calls popen() and reads the result; if the Remote field is only a newline, fgets() succeeds but strtok_r(buf, "\n", &saveptr) returns NULL. A subsequent strcmp(is_remote, "no") then dereferences NULL, causing undefined behavior (typically SIGSEGV) and crashing the PAM module. This can crash the authenticating process (e.g., sudo, login) and, depending on PAM stack configuration, deny access for all users of the affected service. This issue has been fixed in version 0.9.2.

🎖@cveNotify

🚨 CVE-2026-12390
In AzeoTech DAQFactory versions 21.1 and prior, a Type Confusion vulnerability can be exploited by an attacker using specially crafted .ctl files which can result in code execution.

🎖@cveNotify

🚨 CVE-2026-47833
setupBpmLogs follows symlink for bpm.log open and chown — container-to-host privilege escalation via /etc/shadow. A compromised process inside a bpm container can cause root to chown an arbitrary host file to vcap and append bpm JSON log lines to it. The chown alone lets the attacker take ownership of /etc/shadow and read every password hash on the host via the read-only /etc bind mount. This is a container-to-host confidentiality break affecting every bpm-managed job.

Affected versions: bpm-release, all versions prior to v1.4.30.

🎖@cveNotify

🚨 CVE-2026-48937
A flaw in Node.js HTTP/2 server API can cause servers to keep accepting data even after sending a `GOAWAY` frame. This vulnerability affects two supported release lines: **Node.js 22** and **Node.js 24**.

🎖@cveNotify

🚨 CVE-2026-9692
Mojolicious::Sessions::Storable versions through 0.05 for Perl generate session ids insecurely.

The default session id generator returns a SHA-1 hash seeded with the built-in rand function, the epoch time, the heap address of an anonymous hash, and the PID.

These are predictable or low-entropy sources that are unsuitable for security purposes.

🎖@cveNotify

🚨 CVE-2026-25865
Punto Switcher through 4.5.0.583 contains an unquoted search path element vulnerability that allows local attackers to execute arbitrary code by exploiting the application's call to WinExec without a fully qualified path for RunDll32.exe when invoking shell32.dll Control_RunDLL input.dll. Attackers can place a malicious executable earlier in the search order to achieve arbitrary code execution in the context of the affected user.

🎖@cveNotify

🚨 CVE-2026-43915
Coturn is a free open source implementation of TURN and STUN Server. Versions prior to 4.11.0 contain a stored cross-site scripting (XSS) vulnerability in the web-admin HTTPS interface. An attacker who can create a TURN allocation with a crafted USERNAME value can inject HTML/JavaScript that executes when an authenticated web-admin user views the TURN session list. In configurations using anonymous TURN access (--no-auth), this may be exploitable without TURN credentials. In authenticated deployments, exploitation requires valid TURN credentials or control over a provisioned username. This issue has been fixed in version 4.11.0.

🎖@cveNotify

🚨 CVE-2026-47846
Bitnami Cassandra container images are affected by a retained default superuser vulnerability. When a custom administrator account is configured via the CASSANDRA_USER environment variable, the container initialization script creates the new superuser account but fails to drop the built-in cassandra account in certain scenarios. This leaves the default cassandra:cassandra superuser active as an unintended access path.

Affected versions — Container image: 4.0.x prior to 4.0.20-photon-5-r7; 4.1.x prior to 4.1.11-photon-5-r7; 5.0.x prior to 5.0.8-photon-5-r4 / 5.0.8-debian-12-r3.

🎖@cveNotify

🚨 CVE-2026-47847
Bitnami MariaDB Galera container images and Helm chart are affected by a hardcoded default credential vulnerability in the Galera replication health-check user. The MARIADB_REPLICATION_USER and MARIADB_REPLICATION_PASSWORD environment variables defaulted to monitor and monitor respectively. This user is granted REPLICATION CLIENT privileges from any host ('%'). The Bitnami Helm chart for MariaDB Galera did not expose parameters to configure this user's credentials, resulting in all chart deployments using this publicly known credential by default.

Affected versions — Container image: 10.6.x prior to 10.6.27-photon-5-r0; 10.11.x prior to 10.11.17-photon-5-r1; 11.4.x prior to 11.4.12-photon-5-r0; 11.8.x prior to 11.8.7-photon-5-r1; 12.3.x prior to 12.3.2-photon-5-r0 / 12.3.2-debian-12-r0. Helm chart: prior to 18.3.0.

🎖@cveNotify

🚨 CVE-2026-48716
nanobot is a personal AI assistant. In versions 0.1.5.post3 and prior, the WhatsApp bridge in bridge/src/whatsapp.ts constructs a filesystem path using the fileName field from an incoming WhatsApp document message without sanitization. The WhatsApp bridge downloads media attachments and writes them to disk using a filename derived from the sender's message via documentMessage.fileName, which is concatenated with a prefix and its raw value is passed directly to path.join(mediaDir, outFilename). Node.js path.join resolves .. components, allowing an attacker to escape the intended media/ directory by sending a document with a crafted fileName such as ../../../.ssh/authorized_keys. Because the attacker also controls the file content (the downloaded buffer), this is a write-anywhere primitive — both path and content are attacker-controlled. A fix for this issue is planned for version 0.1.5.post4.

🎖@cveNotify

🚨 CVE-2026-48980
pam_usb provides hardware authentication for Linux using removable media. In versions prior to 0.9.2, getenv() environment variables XRDP_SESSION, DISPLAY and TMUX allow environment variable injection into local-check logic. These environment variables influence whether a current session is local or remote, and a PAM module that runs in the context of setuid binaries (sudo, su), getenv() returns attacker-controlled values whenever the process environment has been manipulated by a local user. This issue has been fixed in version 0.9.2.

🎖@cveNotify

🚨 CVE-2026-48981
pam_usb provides hardware authentication for Linux using ordinary removable media. In versions prior to 0.9.2, pam_usb calls xmlReadFile() with flags=0 when loading the configuration file, allowing libxml2 to process external entity references (XXE), potentially making outbound network connections or local file reads at XML parse time from the context of the authenticating process. The vulnerability requires the configuration file to contain crafted XML entity references. Since pam_usb.conf is root-owned, direct exploitation requires prior write access to the config, but the defence-in-depth impact is significant given that pam_usb.so runs in setuid contexts (sudo, su). This issue has been fixed in version 0.9.2.

🎖@cveNotify

🚨 CVE-2026-48982
pam_usb provides hardware authentication for Linux using ordinary removable media. In versions prior to 0.9.2, when updating a one-time pad file, a temporary file is created using open() without the O_EXCL flag. Without O_EXCL, the create operation is not atomic: two concurrent processes racing to update the same pad may both succeed in opening the file, with the second write silently overwriting the first. The one-time pad is the core replay-prevention mechanism of pam_usb. A successful race could result in the stored pad value diverging from what either process expected, potentially causing authentication failures or, in a precisely timed attack, creating a window for pad reuse. This issue has been fixed in version 0.9.2.

🎖@cveNotify

🚨 CVE-2026-48983
pam_usb provides hardware authentication for Linux using ordinary removable media. In versions prior to 0.9.2, a symlink race condition exists in per-device and per-user pad directory creation. pam_usb uses a check-then-act pattern: it calls lstat() to test for existence and then calls mkdir() separately to create the directory. A local attacker can win the race between these calls by replacing the target path with a symlink to a directory they control. If successful, one-time pad files may be written to an attacker-controlled location, potentially exposing future pad values before use or disrupting authentication. This issue has been fixed in version 0.9.2.

🎖@cveNotify

🚨 CVE-2026-56099
OpenBSD before commit 6a23123 (2026-06-18) contains an out-of-bounds read vulnerability in the mpls_do_error function within sys/netmpls/mpls_input.c that allows remote attackers to disclose kernel stack memory by sending crafted MPLS frames with 16 labels and no Bottom-of-Stack bit set.

🎖@cveNotify

🚨 CVE-2025-38415
In the Linux kernel, the following vulnerability has been resolved:

Squashfs: check return result of sb_min_blocksize

Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug.

Syzkaller forks multiple processes which after mounting the Squashfs
filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000).
Now if this ioctl occurs at the same time another process is in the
process of mounting a Squashfs filesystem on /dev/loop0, the failure
occurs. When this happens the following code in squashfs_fill_super()
fails.

----
msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE);
msblk->devblksize_log2 = ffz(~msblk->devblksize);
----

sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0.

As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2
is set to 64.

This subsequently causes the

UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36
shift exponent 64 is too large for 64-bit type 'u64' (aka
'unsigned long long')

This commit adds a check for a 0 return by sb_min_blocksize().

🎖@cveNotify

🚨 CVE-2026-9064
A flaw was found in 389-ds-base. The get_ldapmessage_controls_ext() function in the LDAP server does not enforce an upper bound on the number of controls per LDAP message. A remote, unauthenticated attacker can send a specially crafted LDAP request containing hundreds of thousands of minimal controls within the default maximum BER message size (2 MB), causing excessive CPU consumption and heap allocation on the server. Under concurrent exploitation, this leads to significant latency degradation, worker thread starvation, or out-of-memory termination, resulting in a denial of service.

🎖@cveNotify