🚨 CVE-2024-50067
In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include <stdio.h>
\#include <stdlib.h>
\#include <string.h>
// If string length large than MAX_STRING_SIZE, the fetch_store_strlen()
// will return 0, cause __get_data_size() return shorter size, and
// store_trace_args() will not trigger out-of-bounds access.
// So make string length less than 4096.
\#define STRLEN 4093
void generate_string(char *str, int n)
{
int i;
for (i = 0; i < n; ++i)
{
char c = i % 26 + 'a';
str[i] = c;
}
str[n-1] = '\0';
}
void print_string(char *str)
{
printf("%s\n", str);
}
int main()
{
char tmp[STRLEN];
generate_string(tmp, STRLEN);
print_string(tmp);
return 0;
}
```
3. compile program
`gcc -o test test.c`
4. get the offset of `print_string()`
```
objdump -t test | grep -w print_string
0000000000401199 g F .text 000000000000001b print_string
```
5. configure uprobe with offset 0x1199
```
off=0x1199
cd /sys/kernel/debug/tracing/
echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring"
> uprobe_events
echo 1 > events/uprobes/enable
echo 1 > tracing_on
```
6. run `test`, and kasan will report error.
==================================================================
BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0
Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x27/0x310
kasan_report+0x10f/0x120
? strncpy_from_user+0x1d6/0x1f0
strncpy_from_user+0x1d6/0x1f0
? rmqueue.constprop.0+0x70d/0x2ad0
process_fetch_insn+0xb26/0x1470
? __pfx_process_fetch_insn+0x10/0x10
? _raw_spin_lock+0x85/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __pte_offset_map+0x1f/0x2d0
? unwind_next_frame+0xc5f/0x1f80
? arch_stack_walk+0x68/0xf0
? is_bpf_text_address+0x23/0x30
? kernel_text_address.part.0+0xbb/0xd0
? __kernel_text_address+0x66/0xb0
? unwind_get_return_address+0x5e/0xa0
? __pfx_stack_trace_consume_entry+0x10/0x10
? arch_stack_walk+0xa2/0xf0
? _raw_spin_lock_irqsave+0x8b/0xf0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? depot_alloc_stack+0x4c/0x1f0
? _raw_spin_unlock_irqrestore+0xe/0x30
? stack_depot_save_flags+0x35d/0x4f0
? kasan_save_stack+0x34/0x50
? kasan_save_stack+0x24/0x50
? mutex_lock+0x91/0xe0
? __pfx_mutex_lock+0x10/0x10
prepare_uprobe_buffer.part.0+0x2cd/0x500
uprobe_dispatcher+0x2c3/0x6a0
? __pfx_uprobe_dispatcher+0x10/0x10
? __kasan_slab_alloc+0x4d/0x90
handler_chain+0xdd/0x3e0
handle_swbp+0x26e/0x3d0
? __pfx_handle_swbp+0x10/0x10
? uprobe_pre_sstep_notifier+0x151/0x1b0
irqentry_exit_to_user_mode+0xe2/0x1b0
asm_exc_int3+0x39/0x40
RIP: 0033:0x401199
Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce
RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206
RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2
RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0
RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20
R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040
R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000
</TASK>
This commit enforces the buffer's maxlen less than a page-size to avoid
store_trace_args() out-of-memory access.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include <stdio.h>
\#include <stdlib.h>
\#include <string.h>
// If string length large than MAX_STRING_SIZE, the fetch_store_strlen()
// will return 0, cause __get_data_size() return shorter size, and
// store_trace_args() will not trigger out-of-bounds access.
// So make string length less than 4096.
\#define STRLEN 4093
void generate_string(char *str, int n)
{
int i;
for (i = 0; i < n; ++i)
{
char c = i % 26 + 'a';
str[i] = c;
}
str[n-1] = '\0';
}
void print_string(char *str)
{
printf("%s\n", str);
}
int main()
{
char tmp[STRLEN];
generate_string(tmp, STRLEN);
print_string(tmp);
return 0;
}
```
3. compile program
`gcc -o test test.c`
4. get the offset of `print_string()`
```
objdump -t test | grep -w print_string
0000000000401199 g F .text 000000000000001b print_string
```
5. configure uprobe with offset 0x1199
```
off=0x1199
cd /sys/kernel/debug/tracing/
echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring"
> uprobe_events
echo 1 > events/uprobes/enable
echo 1 > tracing_on
```
6. run `test`, and kasan will report error.
==================================================================
BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0
Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x27/0x310
kasan_report+0x10f/0x120
? strncpy_from_user+0x1d6/0x1f0
strncpy_from_user+0x1d6/0x1f0
? rmqueue.constprop.0+0x70d/0x2ad0
process_fetch_insn+0xb26/0x1470
? __pfx_process_fetch_insn+0x10/0x10
? _raw_spin_lock+0x85/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __pte_offset_map+0x1f/0x2d0
? unwind_next_frame+0xc5f/0x1f80
? arch_stack_walk+0x68/0xf0
? is_bpf_text_address+0x23/0x30
? kernel_text_address.part.0+0xbb/0xd0
? __kernel_text_address+0x66/0xb0
? unwind_get_return_address+0x5e/0xa0
? __pfx_stack_trace_consume_entry+0x10/0x10
? arch_stack_walk+0xa2/0xf0
? _raw_spin_lock_irqsave+0x8b/0xf0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? depot_alloc_stack+0x4c/0x1f0
? _raw_spin_unlock_irqrestore+0xe/0x30
? stack_depot_save_flags+0x35d/0x4f0
? kasan_save_stack+0x34/0x50
? kasan_save_stack+0x24/0x50
? mutex_lock+0x91/0xe0
? __pfx_mutex_lock+0x10/0x10
prepare_uprobe_buffer.part.0+0x2cd/0x500
uprobe_dispatcher+0x2c3/0x6a0
? __pfx_uprobe_dispatcher+0x10/0x10
? __kasan_slab_alloc+0x4d/0x90
handler_chain+0xdd/0x3e0
handle_swbp+0x26e/0x3d0
? __pfx_handle_swbp+0x10/0x10
? uprobe_pre_sstep_notifier+0x151/0x1b0
irqentry_exit_to_user_mode+0xe2/0x1b0
asm_exc_int3+0x39/0x40
RIP: 0033:0x401199
Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce
RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206
RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2
RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0
RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20
R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040
R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000
</TASK>
This commit enforces the buffer's maxlen less than a page-size to avoid
store_trace_args() out-of-memory access.
🎖@cveNotify
🚨 CVE-2024-9342
In Eclipse GlassFish versions before 8.0.3 it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts. GlassFish 8.0.3 adds automatic attack protection documented in https://glassfish.org/docs/latest/security-guide.html#brute-force-attack-protection .
🎖@cveNotify
In Eclipse GlassFish versions before 8.0.3 it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts. GlassFish 8.0.3 adds automatic attack protection documented in https://glassfish.org/docs/latest/security-guide.html#brute-force-attack-protection .
🎖@cveNotify
GitLab
Glassfish brute force login (#33) · Issues · Eclipse Projects Security / cve-assignment · GitLab
The Eclipse Foundation is a Common Vulnerabilities and Exposures (CVE) Numbering Authority. This issue it used to request and track the progress...
🚨 CVE-2023-53543
In the Linux kernel, the following vulnerability has been resolved:
vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa max vqp attr to avoid
such bugs.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa max vqp attr to avoid
such bugs.
🎖@cveNotify
🚨 CVE-2023-53596
In the Linux kernel, the following vulnerability has been resolved:
drivers: base: Free devm resources when unregistering a device
In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.
This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.
We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.
This is effectively the same change than commit 2f8d16a996da ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddeaca ("driver core: free devres in device_release") over
memory leaks concerns.
This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drivers: base: Free devm resources when unregistering a device
In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.
This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.
We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.
This is effectively the same change than commit 2f8d16a996da ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddeaca ("driver core: free devres in device_release") over
memory leaks concerns.
This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds.
🎖@cveNotify
🚨 CVE-2026-39813
A path traversal: '../filedir' vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.5, FortiSandbox 4.4.0 through 4.4.8 may allow attacker to escalation of privilege via specially crafted HTTP requests.
🎖@cveNotify
A path traversal: '../filedir' vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.5, FortiSandbox 4.4.0 through 4.4.8 may allow attacker to escalation of privilege via specially crafted HTTP requests.
🎖@cveNotify
FortiGuard Labs
PSIRT | FortiGuard Labs
None
🚨 CVE-2026-42919
A vulnerability exists in BIG-IP systems that may allow an authenticated attacker with administrative access to escalate their privileges. A successful exploit may allow the attacker to cross a security boundary.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
A vulnerability exists in BIG-IP systems that may allow an authenticated attacker with administrative access to escalate their privileges. A successful exploit may allow the attacker to cross a security boundary.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
F5
BIG-IP Appliance mode vulnerability CVE-2026-42919
Security Advisory Description A vulnerability exists in BIG-IP systems that may allow an authenticated attacker with administrative access to escalate their privileges. A successful exploit may allow the attacker to cross a security boundary. (CVE-2026-42919)…
🚨 CVE-2026-42920
When a Client SSL profile is configured with Allow Dynamic Record Sizing on a UDP virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
When a Client SSL profile is configured with Allow Dynamic Record Sizing on a UDP virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
F5
BIG-IP DTLS vulnerability CVE-2026-42920
Security Advisory Description When a Client SSL profile is configured with Allow Dynamic Record Sizing on a UDP virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. (CVE-2026-42920) Impact Traffic is disrupted…
🚨 CVE-2026-42924
An authenticated attacker with the Resource Administrator or Administrator role can create SNMP configuration objects through iControl SOAP resulting in privilege escalation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
An authenticated attacker with the Resource Administrator or Administrator role can create SNMP configuration objects through iControl SOAP resulting in privilege escalation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
F5
BIG-IP iControl SOAP vulnerability CVE-2026-42924
Security Advisory Description An authenticated attacker with the Resource Administrator or Administrator role can create SNMP configuration objects through iControl SOAP resulting in privilege escalation. (CVE-2026-42924) Impact This vulnerability may allow…
🚨 CVE-2026-42926
When NGINX Open Source is configured to proxy HTTP/2 traffic by setting proxy_http_version to 2, and also uses proxy_set_body, an attacker may be able to inject frame headers and payload bytes to the upstream peer. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
When NGINX Open Source is configured to proxy HTTP/2 traffic by setting proxy_http_version to 2, and also uses proxy_set_body, an attacker may be able to inject frame headers and payload bytes to the upstream peer. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
F5
NGINX ngx_http_proxy_v2_module vulnerability CVE-2026-42926
Security Advisory Description When NGINX Open Source is configured to proxy HTTP/2 traffic by setting proxy_http_version to 2, and also uses proxy_set_body, an attacker may be able to inject frame headers and payload bytes to the upstream peer. (CVE-2026…
🚨 CVE-2026-42930
When running in Appliance mode, an authenticated attacker assigned the 'Administrator' role may be able to bypass Appliance mode restrictions on a BIG-IP system.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
When running in Appliance mode, an authenticated attacker assigned the 'Administrator' role may be able to bypass Appliance mode restrictions on a BIG-IP system.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
F5
Appliance mode iControl REST vulnerability CVE-2026-42930
Security Advisory Description When running in Appliance mode, an authenticated attacker assigned the Administrator role may be able to bypass Appliance mode restrictions on a BIG-IP system. (CVE-2026-42930) Impact An authenticated attacker with local system…
🚨 CVE-2026-42934
NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_charset_module module. When charset, source_charset, and charset_map and proxy_pass with disabled buffering ("off") directives are configured, unauthenticated attackers can send requests that with conditions beyond the attackers' control to cause a heap buffer over-read in the NGINX worker process, leading to limited disclosure of memory or a restart.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_charset_module module. When charset, source_charset, and charset_map and proxy_pass with disabled buffering ("off") directives are configured, unauthenticated attackers can send requests that with conditions beyond the attackers' control to cause a heap buffer over-read in the NGINX worker process, leading to limited disclosure of memory or a restart.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
F5
NGINX ngx_http_charset_module vulnerability CVE-2026-42934
Security Advisory Description NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_charset_module module. When charset, source_charset, and charset_map and proxy_pass with disabled buffering ("off") directives are configured, unauthenticated…
🚨 CVE-2026-42945
NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_rewrite_module module. This vulnerability exists when the rewrite directive is followed by a rewrite, if, or set directive and an unnamed Perl-Compatible Regular Expression (PCRE) capture (for example, $1, $2) with a replacement string that includes a question mark (?). An unauthenticated attacker along with conditions beyond its control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_rewrite_module module. This vulnerability exists when the rewrite directive is followed by a rewrite, if, or set directive and an unnamed Perl-Compatible Regular Expression (PCRE) capture (for example, $1, $2) with a replacement string that includes a question mark (?). An unauthenticated attacker along with conditions beyond its control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
F5
NGINX ngx_http_rewrite_module vulnerability CVE-2026-42945
Security Advisory Description NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_rewrite_module module. This vulnerability exists when the "rewrite" directive with a query string is followed (in the same location) by the "if" or "set" directive…
🚨 CVE-2026-42946
A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to read the memory of the NGINX worker process or restart it. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to read the memory of the NGINX worker process or restart it. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
🎖@cveNotify
F5
NGINX ngx_http_scgi_module and ngx_http_uwsgi_module vulnerability CVE-2026-42946
Security Advisory Description A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker…
🚨 CVE-2026-41178
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Versions 1.41.0 and 1.43.0 removed raw-length rejection and it causes `Parse` to process arbitrarily large/invalid baggage headers and log errors, enabling DoS via oversized inputs. Versions 1.42.0 and 1.44.0 fix the issue.
🎖@cveNotify
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Versions 1.41.0 and 1.43.0 removed raw-length rejection and it causes `Parse` to process arbitrarily large/invalid baggage headers and log errors, enabling DoS via oversized inputs. Versions 1.42.0 and 1.44.0 fix the issue.
🎖@cveNotify
GitHub
Comply with W3C Baggage specification limits by XSAM · Pull Request #7880 · open-telemetry/opentelemetry-go
Updates the baggage implementation to comply with https://www.w3.org/TR/baggage/#limits:
Changed maxMembers from 180 to 64 (the W3C compliance requirement)
The resulting baggage-string contains ...
Changed maxMembers from 180 to 64 (the W3C compliance requirement)
The resulting baggage-string contains ...
🚨 CVE-2026-45287
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Prior to version 0.0.17, `go.opentelemetry.io/otel/schema/v1.0` and `go.opentelemetry.io/otel/schema/v1.1` leaks one file descriptor on each successful `ParseFile` call. `ParseFile` opens the schema file and passes it to `Parse` without closing it; repeated parsing in a long-running process can exhaust the process file descriptor limit and cause denial of service. Exploitation depends on a consuming application exposing repeated schema parsing to an attacker-controlled path. Version 0.0.17 contains a patch for the issue.
🎖@cveNotify
OpenTelemetry-Go is the Go implementation of OpenTelemetry. Prior to version 0.0.17, `go.opentelemetry.io/otel/schema/v1.0` and `go.opentelemetry.io/otel/schema/v1.1` leaks one file descriptor on each successful `ParseFile` call. `ParseFile` opens the schema file and passes it to `Parse` without closing it; repeated parsing in a long-running process can exhaust the process file descriptor limit and cause denial of service. Exploitation depends on a consuming application exposing repeated schema parsing to an attacker-controlled path. Version 0.0.17 contains a patch for the issue.
🎖@cveNotify
GitHub
Add ability to parse Schema files according to OTEP 0152 (#2267) · open-telemetry/opentelemetry-go@e72a235
* Add ability to parse Schema files according to OTEP 0152
The parser and parsed representation (AST) are placed in a separate
Go module so that they are can be consumed independently without
...
The parser and parsed representation (AST) are placed in a separate
Go module so that they are can be consumed independently without
...
🚨 CVE-2026-49975
Memory Allocation with Excessive Size Value vulnerability in Apache HTTP Server's mod_http leads to denial of service via malicious HTTP requests.
This issue affects Apache HTTP Server: from 2.4.17 through 2.4.67.
🎖@cveNotify
Memory Allocation with Excessive Size Value vulnerability in Apache HTTP Server's mod_http leads to denial of service via malicious HTTP requests.
This issue affects Apache HTTP Server: from 2.4.17 through 2.4.67.
🎖@cveNotify
httpd.apache.org
Apache HTTP Server 2.4 vulnerabilities - The Apache HTTP Server Project
🚨 CVE-2026-0416
An insufficient input validation vulnerability in certain NETGEAR router models as listed allows an authenticated administrator with local network access to submit crafted input that bypasses intended management interface restrictions, resulting in unauthorized modification of protected router software or functionality.
🎖@cveNotify
An insufficient input validation vulnerability in certain NETGEAR router models as listed allows an authenticated administrator with local network access to submit crafted input that bypasses intended management interface restrictions, resulting in unauthorized modification of protected router software or functionality.
🎖@cveNotify
NETGEAR KB
June 2026 NETGEAR Security Advisory
NETGEAR's Product Security Team has assessed the following product vulnerabilities and provided guidance to address these vulnerabilities in the table below. Because firmware updates contain security fixes, bug fixes, and new features for your products, we…
🚨 CVE-2026-0417
Insufficient input validation vulnerability in the listed NETGEAR devices allows
authenticated administrators connected to the local network to tamper with
the router's integrity.
🎖@cveNotify
Insufficient input validation vulnerability in the listed NETGEAR devices allows
authenticated administrators connected to the local network to tamper with
the router's integrity.
🎖@cveNotify
NETGEAR KB
June 2026 NETGEAR Security Advisory
NETGEAR's Product Security Team has assessed the following product vulnerabilities and provided guidance to address these vulnerabilities in the table below. Because firmware updates contain security fixes, bug fixes, and new features for your products, we…
🚨 CVE-2026-0418
Insufficient configuration management in the listed devices allows authenticated administrators connected to the local network
to tamper with the system.
🎖@cveNotify
Insufficient configuration management in the listed devices allows authenticated administrators connected to the local network
to tamper with the system.
🎖@cveNotify
NETGEAR KB
June 2026 NETGEAR Security Advisory
NETGEAR's Product Security Team has assessed the following product vulnerabilities and provided guidance to address these vulnerabilities in the table below. Because firmware updates contain security fixes, bug fixes, and new features for your products, we…
🚨 CVE-2026-3088
Unauthenticated users on the local network can cause the router to become unavailable by sending specially crafted requests.
🎖@cveNotify
Unauthenticated users on the local network can cause the router to become unavailable by sending specially crafted requests.
🎖@cveNotify
NETGEAR KB
June 2026 NETGEAR Security Advisory
NETGEAR's Product Security Team has assessed the following product vulnerabilities and provided guidance to address these vulnerabilities in the table below. Because firmware updates contain security fixes, bug fixes, and new features for your products, we…
🚨 CVE-2026-9210
Insufficient input validation vulnerability in the listed NETGEAR models allows authenticated administrators connected to the local network to make unauthorized modification of router software and functionality.
🎖@cveNotify
Insufficient input validation vulnerability in the listed NETGEAR models allows authenticated administrators connected to the local network to make unauthorized modification of router software and functionality.
🎖@cveNotify
NETGEAR KB
June 2026 NETGEAR Security Advisory
NETGEAR's Product Security Team has assessed the following product vulnerabilities and provided guidance to address these vulnerabilities in the table below. Because firmware updates contain security fixes, bug fixes, and new features for your products, we…