🚨 CVE-2026-20220
A vulnerability in the web-based management interface of Cisco Crosswork Network Controller could allow an authenticated, remote attacker to execute arbitrary commands on an affected device.
This vulnerability is due to insufficient input validation in the configuration template engine of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system in limited areas of the file system. This vulnerability affects only areas of the operating system for which the template user has write permissions.
To exploit this vulnerability, the attacker must have valid template user credentials with write permissions. Template users with read permissions cannot exploit this vulnerability.
🎖@cveNotify
A vulnerability in the web-based management interface of Cisco Crosswork Network Controller could allow an authenticated, remote attacker to execute arbitrary commands on an affected device.
This vulnerability is due to insufficient input validation in the configuration template engine of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system in limited areas of the file system. This vulnerability affects only areas of the operating system for which the template user has write permissions.
To exploit this vulnerability, the attacker must have valid template user credentials with write permissions. Template users with read permissions cannot exploit this vulnerability.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco Crosswork Network Controller Server-Side Template Injection Vulnerability
A vulnerability in the web-based management interface of Cisco Crosswork Network Controller could allow an authenticated, remote attacker to execute arbitrary commands on an affected device.
This vulnerability is due to insufficient input validation in the…
This vulnerability is due to insufficient input validation in the…
🚨 CVE-2026-20246
A vulnerability in the vmadmin CLI of Cisco Umbrella Virtual Appliance could allow an authenticated, local attacker to elevate privileges on an affected device.
This vulnerability is due to insufficient validation of user-supplied commands. An attacker with vmadmin privileges could exploit this vulnerability by using certain commands at the CLI. A successful exploit could allow the attacker to elevate privileges to root.
🎖@cveNotify
A vulnerability in the vmadmin CLI of Cisco Umbrella Virtual Appliance could allow an authenticated, local attacker to elevate privileges on an affected device.
This vulnerability is due to insufficient validation of user-supplied commands. An attacker with vmadmin privileges could exploit this vulnerability by using certain commands at the CLI. A successful exploit could allow the attacker to elevate privileges to root.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco Umbrella Virtual Appliance Privilege Escalation Vulnerability
A vulnerability in the vmadmin CLI of Cisco Umbrella Virtual Appliance could allow an authenticated, local attacker to elevate privileges on an affected device.
This vulnerability is due to insufficient validation of user-supplied commands. An attacker with…
This vulnerability is due to insufficient validation of user-supplied commands. An attacker with…
🚨 CVE-2026-32652
Dell AIOps Collector versions prior to 1.18.3 contain a "Use of Default Credentials" vulnerability. A low privileged attacker with console access could potentially exploit this vulnerability to gain Filesystem access. This vulnerability only affects fresh installations of Collector versions earlier than 1.18.3. Systems that have been upgraded (either manually or automatically) to version 1.18.3 or later are not impacted, even if they were originally installed on an earlier version.
🎖@cveNotify
Dell AIOps Collector versions prior to 1.18.3 contain a "Use of Default Credentials" vulnerability. A low privileged attacker with console access could potentially exploit this vulnerability to gain Filesystem access. This vulnerability only affects fresh installations of Collector versions earlier than 1.18.3. Systems that have been upgraded (either manually or automatically) to version 1.18.3 or later are not impacted, even if they were originally installed on an earlier version.
🎖@cveNotify
🚨 CVE-2026-35068
Dell PowerFlex Manager, version(s) [Versions], contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to information disclosure.
🎖@cveNotify
Dell PowerFlex Manager, version(s) [Versions], contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to information disclosure.
🎖@cveNotify
🚨 CVE-2026-35069
Dell PowerFlex Manager, version(s) [Versions], contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to Script injection.
🎖@cveNotify
Dell PowerFlex Manager, version(s) [Versions], contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to Script injection.
🎖@cveNotify
🚨 CVE-2026-3490
picklescan before 1.0.4 fails to block pkgutil.resolve_name, allowing attackers to bypass the entire blocklist by resolving any dangerous function through indirect REDUCE calls. Remote attackers can invoke any blocked function such as os.system, builtins.exec, or subprocess.call to achieve remote code execution.
🎖@cveNotify
picklescan before 1.0.4 fails to block pkgutil.resolve_name, allowing attackers to bypass the entire blocklist by resolving any dangerous function through indirect REDUCE calls. Remote attackers can invoke any blocked function such as os.system, builtins.exec, or subprocess.call to achieve remote code execution.
🎖@cveNotify
GitHub
pkgutil.resolve_name universal blocklist bypass
## Summary
`pkgutil.resolve_name()` is a Python stdlib function that resolves any `"module:attribute"` string to the corresponding Python object at runtime. By using `pkgutil.resolve_n...
`pkgutil.resolve_name()` is a Python stdlib function that resolves any `"module:attribute"` string to the corresponding Python object at runtime. By using `pkgutil.resolve_n...
🚨 CVE-2026-53872
picklescan before 0.0.35 contains an unsafe pickle deserialization vulnerability allowing unauthenticated attackers to read arbitrary server files by chaining io.FileIO and urllib.request.urlopen. Attackers can bypass RCE-focused blocklists to exfiltrate sensitive data like /etc/passwd to external servers.
🎖@cveNotify
picklescan before 0.0.35 contains an unsafe pickle deserialization vulnerability allowing unauthenticated attackers to read arbitrary server files by chaining io.FileIO and urllib.request.urlopen. Attackers can bypass RCE-focused blocklists to exfiltrate sensitive data like /etc/passwd to external servers.
🎖@cveNotify
GitHub
Arbitrary file read using `io.FileIO`
### Summary
Unsafe pickle deserialization allows unauthenticated attackers to read arbitrary server files and perform SSRF. By chaining io.FileIO and urllib.request.urlopen, an attacker can bypass...
Unsafe pickle deserialization allows unauthenticated attackers to read arbitrary server files and perform SSRF. By chaining io.FileIO and urllib.request.urlopen, an attacker can bypass...
🚨 CVE-2026-53873
picklescan before 1.0.4 contains an incomplete blocklist for the profile module that fails to block the module-level profile.run() function, allowing attackers to achieve arbitrary code execution via exec(). Attackers can craft malicious pickle files calling profile.run(statement) to execute arbitrary Python code while picklescan reports zero security issues.
🎖@cveNotify
picklescan before 1.0.4 contains an incomplete blocklist for the profile module that fails to block the module-level profile.run() function, allowing attackers to achieve arbitrary code execution via exec(). Attackers can craft malicious pickle files calling profile.run(statement) to execute arbitrary Python code while picklescan reports zero security issues.
🎖@cveNotify
GitHub
profile.run blocklist mismatch allows exec() bypass
## Summary
picklescan v1.0.3 blocks `profile.Profile.run` and `profile.Profile.runctx` but does NOT block the module-level `profile.run()` function. A malicious pickle calling `profile.run(stat...
picklescan v1.0.3 blocks `profile.Profile.run` and `profile.Profile.runctx` but does NOT block the module-level `profile.run()` function. A malicious pickle calling `profile.run(stat...
🚨 CVE-2026-53875
picklescan before 1.0.3 contains a scanning bypass vulnerability in the scan_pytorch function that allows attackers to embed malicious magic numbers via dynamic eval using the __reduce__ trick. Attackers can craft malicious PyTorch payloads that evade picklescan detection while remaining executable, enabling arbitrary code execution when loaded with torch.load().
🎖@cveNotify
picklescan before 1.0.3 contains a scanning bypass vulnerability in the scan_pytorch function that allows attackers to embed malicious magic numbers via dynamic eval using the __reduce__ trick. Attackers can craft malicious PyTorch payloads that evade picklescan detection while remaining executable, enabling arbitrary code execution when loaded with torch.load().
🎖@cveNotify
🚨 CVE-2026-9675
Impact:
The undici WebSocket client enforces maxPayloadSize per-frame but does not enforce the cumulative size of fragmented uncompressed messages. A malicious WebSocket server can stream many small fragments that each pass per-frame validation but collectively exceed the configured limit, causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.
Affected applications are those using the undici WebSocket client (new WebSocket(...)) that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.
This is a regression specific to undici 8.1.0. The 6.25.0 line shipped the equivalent cumulative check from the start and is unaffected. The 7.x line never had the maxPayloadSize feature and is also unaffected.
Patches:
Upgrade to undici >= 8.5.0.
Workarounds:
No workaround is available. The fix must be applied through an upgrade.
🎖@cveNotify
Impact:
The undici WebSocket client enforces maxPayloadSize per-frame but does not enforce the cumulative size of fragmented uncompressed messages. A malicious WebSocket server can stream many small fragments that each pass per-frame validation but collectively exceed the configured limit, causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.
Affected applications are those using the undici WebSocket client (new WebSocket(...)) that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.
This is a regression specific to undici 8.1.0. The 6.25.0 line shipped the equivalent cumulative check from the start and is unaffected. The 7.x line never had the maxPayloadSize feature and is also unaffected.
Patches:
Upgrade to undici >= 8.5.0.
Workarounds:
No workaround is available. The fix must be applied through an upgrade.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-11525
Impact:
When undici parses a Set-Cookie header, it accepts any SameSite attribute value that contains Strict, Lax, or None as a substring, rather than the case-insensitive exact match specified by RFC 6265. Non-spec values are silently mapped to one of the three standard tokens. For example, SameSite=NoneOfYourBusiness is parsed as None (the most permissive setting), and SameSite=StrictLax is parsed as Lax (a downgrade from Strict).
Affected applications are those that consume Set-Cookie headers from server responses (for example via undici's fetch or proxy code paths) and then forward or rely on the parsed sameSite attribute. A malicious or non-compliant server can coerce the consumer's view of a cookie's SameSite policy to a weaker value, silently degrading the SameSite enforcement the cookie is supposed to provide.
This was introduced in undici 5.15.0 when the cookies feature was added.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
After parsing a Set-Cookie header, validate that the resulting sameSite attribute is one of 'Strict', 'Lax', or 'None' (exact, case-insensitive) before forwarding or relying on it.
🎖@cveNotify
Impact:
When undici parses a Set-Cookie header, it accepts any SameSite attribute value that contains Strict, Lax, or None as a substring, rather than the case-insensitive exact match specified by RFC 6265. Non-spec values are silently mapped to one of the three standard tokens. For example, SameSite=NoneOfYourBusiness is parsed as None (the most permissive setting), and SameSite=StrictLax is parsed as Lax (a downgrade from Strict).
Affected applications are those that consume Set-Cookie headers from server responses (for example via undici's fetch or proxy code paths) and then forward or rely on the parsed sameSite attribute. A malicious or non-compliant server can coerce the consumer's view of a cookie's SameSite policy to a weaker value, silently degrading the SameSite enforcement the cookie is supposed to provide.
This was introduced in undici 5.15.0 when the cookies feature was added.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
After parsing a Set-Cookie header, validate that the resulting sameSite attribute is one of 'Strict', 'Lax', or 'None' (exact, case-insensitive) before forwarding or relying on it.
🎖@cveNotify
OpenJS Foundation CVE Numbering Authority
Security Advisories
The OpenJS Foundation’s CVE Numbering Authority (CNA)
🚨 CVE-2026-20178
A vulnerability in the browser-based version of Cisco Webex App could have allowed an unauthenticated, remote attacker to redirect users to a malicious webpage. Cisco has addressed this vulnerability in the Cisco Webex App, and no customer action is needed.
This vulnerability existed due to improper input validation of URL parameters in an HTTP request. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to click a crafted URL. A successful exploit could have allowed the attacker to redirect a user to a malicious website.
🎖@cveNotify
A vulnerability in the browser-based version of Cisco Webex App could have allowed an unauthenticated, remote attacker to redirect users to a malicious webpage. Cisco has addressed this vulnerability in the Cisco Webex App, and no customer action is needed.
This vulnerability existed due to improper input validation of URL parameters in an HTTP request. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to click a crafted URL. A successful exploit could have allowed the attacker to redirect a user to a malicious website.
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco Webex App Open Redirect Vulnerability
A vulnerability in the browser-based version of Cisco Webex App could have allowed an unauthenticated, remote attacker to redirect users to a malicious webpage. Cisco has addressed this vulnerability in the Cisco Webex App, and no customer action is needed.…
🚨 CVE-2026-20265
In Splunk AI Toolkit versions below 5.7.4, a low-privileged user that does not hold the "admin" or "power" Splunk roles could cause the Splunk AI Toolkit to make outbound requests over HTTP to a server that an attacker controls, which could allow for data exfiltration.
The vulnerability exists because of an insecure default domain allowlist in the Splunk AI Toolkit, which does not restrict outbound AI agent requests to approved external domains.
🎖@cveNotify
In Splunk AI Toolkit versions below 5.7.4, a low-privileged user that does not hold the "admin" or "power" Splunk roles could cause the Splunk AI Toolkit to make outbound requests over HTTP to a server that an attacker controls, which could allow for data exfiltration.
The vulnerability exists because of an insecure default domain allowlist in the Splunk AI Toolkit, which does not restrict outbound AI agent requests to approved external domains.
🎖@cveNotify
Splunk Vulnerability Disclosure
Insecure Default Domain Allowlist in Splunk AI Toolkit
In Splunk AI Toolkit versions below 5.7.4, a low-privileged user that does not hold the
🚨 CVE-2026-20266
In Splunk AI Toolkit versions below 5.7.4, a user who holds the "admin" Splunk role could execute arbitrary OS commands on the host running the Splunk Enterprise instance.
The vulnerability is possible because of an unsafe shell execution pattern in the btool configuration helper, which constructs OS command strings from dynamic parameters without disabling shell interpretation.
🎖@cveNotify
In Splunk AI Toolkit versions below 5.7.4, a user who holds the "admin" Splunk role could execute arbitrary OS commands on the host running the Splunk Enterprise instance.
The vulnerability is possible because of an unsafe shell execution pattern in the btool configuration helper, which constructs OS command strings from dynamic parameters without disabling shell interpretation.
🎖@cveNotify
Splunk Vulnerability Disclosure
OS Command Injection in the btool Configuration Helper in Splunk AI Toolkit
In Splunk AI Toolkit versions below 5.7.4, a user who holds the
🚨 CVE-2026-2467
Heap-based Buffer Overflow vulnerability in RTI Connext Professional (Core Libraries) allows Overflow Variables and Tags.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*, from 5.0.0 before 5.2.*.
🎖@cveNotify
Heap-based Buffer Overflow vulnerability in RTI Connext Professional (Core Libraries) allows Overflow Variables and Tags.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*, from 5.0.0 before 5.2.*.
🎖@cveNotify
🚨 CVE-2026-2674
Out-of-bounds Write, Out-of-bounds Write, Out-of-bounds Write vulnerability in RTI Connext Professional (Queueing Service,Core Libraries,Persistence Service) allows Overflow Buffers, Overflow Buffers, Overflow Buffers.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*.
🎖@cveNotify
Out-of-bounds Write, Out-of-bounds Write, Out-of-bounds Write vulnerability in RTI Connext Professional (Queueing Service,Core Libraries,Persistence Service) allows Overflow Buffers, Overflow Buffers, Overflow Buffers.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*.
🎖@cveNotify
🚨 CVE-2026-2675
Missing Authentication for Critical Function vulnerability in RTI Connext Professional (Security Plugins) allows Fake the Source of Data.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*.
🎖@cveNotify
Missing Authentication for Critical Function vulnerability in RTI Connext Professional (Security Plugins) allows Fake the Source of Data.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*.
🎖@cveNotify
🚨 CVE-2026-30799
Missing Authentication for Critical Function vulnerability in RTI Connext Professional (Security Plugins) allows Identity Spoofing.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.*, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*.
🎖@cveNotify
Missing Authentication for Critical Function vulnerability in RTI Connext Professional (Security Plugins) allows Identity Spoofing.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.*, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*.
🎖@cveNotify
🚨 CVE-2026-30802
Out-of-bounds Read vulnerability in RTI Connext Micro (Core Libraries) allows Overread Buffers.This issue affects Connext Micro: from 4.0.0 before 4.3.0.
🎖@cveNotify
Out-of-bounds Read vulnerability in RTI Connext Micro (Core Libraries) allows Overread Buffers.This issue affects Connext Micro: from 4.0.0 before 4.3.0.
🎖@cveNotify
🚨 CVE-2026-30803
Integer Underflow (Wrap or Wraparound) vulnerability in RTI Connext Micro (Core Libraries) allows Overread Buffers.This issue affects Connext Micro: from 4.0.0 before 4.3.0.
🎖@cveNotify
Integer Underflow (Wrap or Wraparound) vulnerability in RTI Connext Micro (Core Libraries) allows Overread Buffers.This issue affects Connext Micro: from 4.0.0 before 4.3.0.
🎖@cveNotify
🚨 CVE-2026-3894
Out-of-bounds Read vulnerability in RTI Connext Professional (Core Libraries) allows Overread Buffers.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*, from 5.0.0 before 5.2.*.
🎖@cveNotify
Out-of-bounds Read vulnerability in RTI Connext Professional (Core Libraries) allows Overread Buffers.This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*, from 6.0.0 before 6.0.*, from 5.3.0 before 5.3.*, from 5.0.0 before 5.2.*.
🎖@cveNotify