CVE Notify
19.1K subscribers
4 photos
185K links
Alert on the latest CVEs

Partner channel: @malwr
Download Telegram
🚨 CVE-2026-12218
A vulnerability was detected in Yealink SIP-T46U 108.87.50.1. The affected element is the function StartReportInformation of the file /api/inner/beforewifitest of the component Web FastCGI Service. The manipulation of the argument port results in stack-based buffer overflow. Access to the local network is required for this attack. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

πŸŽ–@cveNotify
🚨 CVE-2026-12219
A flaw has been found in Yealink SIP-T46U 108.86.0.118. The impacted element is the function mod_diagnose.CommandShellByType of the file /api/diagnosis/start of the component Web FastCGI Service. This manipulation of the argument Time causes command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

πŸŽ–@cveNotify
🚨 CVE-2026-12220
A vulnerability has been found in Yealink SIP-T46U 108.86.0.118. This affects the function mod_upgrade.SparePartsUpload of the file /api/upgrade/accupgradebychunk of the component Firmware Chunk Upload handler. Such manipulation of the argument uid leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

πŸŽ–@cveNotify
🚨 CVE-2026-12221
A vulnerability was found in Yealink SIP-T46U 108.86.0.118. This impacts the function sprintf of the file /api/upgrade/upgrade of the component Firmware Chunk Upload Handler. Performing a manipulation of the argument uid/start_offset results in stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

πŸŽ–@cveNotify
🚨 CVE-2026-12222
A vulnerability was determined in Yealink SIP-T46U 108.86.0.118. Affected is the function mod_webd.BlueToothTest of the file /api/inner/bttest of the component Web FastCGI Service. Executing a manipulation of the argument btMac/pin/reserved can lead to stack-based buffer overflow. The attack needs to be done within the local network. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

πŸŽ–@cveNotify
🚨 CVE-2026-12223
A vulnerability was identified in Yealink SIP-T46U 108.86.0.118. Affected by this vulnerability is the function mod_webd.TFTPUploadIperf of the file /api/inner/tftpuploadiperf of the component Web FastCGI Service. The manipulation of the argument ip/port leads to command injection. The attack needs to be initiated within the local network. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

πŸŽ–@cveNotify
🚨 CVE-2026-8385
The WP Go Maps WordPress plugin before 10.0.10 does not properly enforce the marker approval filter on the admin-ajax fallback for its datatables route, allowing unauthenticated visitors to retrieve marker records that the site owner has not approved for public display, including their title, category, address and description fields.

πŸŽ–@cveNotify
🚨 CVE-2026-8386
The WP Go Maps WordPress plugin before 10.0.10 does not perform any approval-state filtering on its public single-marker REST endpoint, allowing unauthenticated users to retrieve marker records that an administrator has not yet approved for public display, including any PII placed in the address and description fields and the marker's geographic coordinates.

πŸŽ–@cveNotify
🚨 CVE-2026-8935
The WP MAPS PRO WordPress plugin before 6.1.1 registers an unauthenticated AJAX action which, given a valid nonce that is publicly emitted on any frontend page enqueuing its map script, unconditionally creates an administrator account and returns a magic-login URL granting interactive admin access.

πŸŽ–@cveNotify
🚨 CVE-2026-11860
Quick.CMS deserializes user-controlled data received over plaintext HTTP without ensuring integrity or authenticity. This allows attackers to tamper with serialized payloads in transit and inject malicious objects. Because deserialization is performed without proper validation or class restrictions, crafted payloads can trigger dangerous magic methods (e.g., __wakeup() and __destruct()) and leverage gadget chains, resulting in arbitrary code execution. Exploitation is triggered automatically when an administrator accesses the admin panel.

When successfully exploited, this vulnerability allows attackers to execute arbitrary code on the server via manipulated serialized data transmitted over an unprotected channel.

This issue was mitigated by limiting the communication to HTTPS in a patch for version 6.8 published on 14.05.2026, deployments without this patch remain vulnerable.

πŸŽ–@cveNotify
🚨 CVE-2026-44188
A flaw was found in Ansible Lightspeed. This vulnerability, related to insufficient session expiration, allows a remote attacker to maintain persistent access to the Ansible Lightspeed instance. If an attacker exfiltrates a valid OAuth (Open Authorization) access token before a user logs out, they can continue to authenticate and access sensitive data. This is because the application fails to invalidate the token on the backend, leaving it valid until its natural expiration. This can lead to unauthorized read access to Ansible resources such as inventories, playbooks, and configuration data.

πŸŽ–@cveNotify
🚨 CVE-2026-34021
The Wertheim SafeController 5400, Controller 5400 - AssemblyVersion 6.11.8130.22320, uses RS-485 communication between the server and the microcontroller without cryptographic protection. An attacker with access to the communication path between the server and the microcontroller can sniff RS-485 messages and replay previously observed messages. This can be used, for example, to spoof a "quit alarm" message and continuously deactivate the safe alarm.

πŸŽ–@cveNotify
🚨 CVE-2026-34022
The Wertheim SafeController Family 65000, Controller 65000 - AssemblyVersion 6.11.8130.22319, uses weak custom cryptographic algorithms with hard-coded cryptographic keys to protect communication. An attacker in an adversary-in-the-middle position can decrypt the data traffic. During reassessment, it was possible to break the encryption/decryption routine and decrypt messages without knowledge of the encryption key. It was also possible to gain knowledge about the encryption key by intercepting enough messages.

πŸŽ–@cveNotify
🚨 CVE-2026-34023
The Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, contains an incorrect authorization vulnerability in the WebSocket communication used by the SafeController WebMessageBroker. An authenticated attacker with valid low-privileged branch user credentials can manipulate WebSocket messages by specifying controller identifiers belonging to other branches. This allows the attacker to access restricted functions and resources in other branches, including activating boxes outside of the user's authorized branch.

πŸŽ–@cveNotify
🚨 CVE-2026-34024
The Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, contains missing authorization checks on multiple web application endpoints. An authenticated attacker with minimal privileges can access endpoints that are not visible in the frontend but remain directly reachable. This allows the attacker to perform restricted actions such as switching the user's branch, uploading arbitrary files, downloading arbitrary files, and viewing details of arbitrary branches.

πŸŽ–@cveNotify
🚨 CVE-2026-34025
The Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, contains an IP restriction bypass vulnerability in the login process. The application restricts user logins based on the IP address associated with a branch location, but the client IP address is derived from the HTTP X-Forwarded-For header when that header is present. An attacker with valid branch user credentials can manipulate the X-Forwarded-For header during login to spoof the expected branch IP address and obtain a valid authenticated session from an unauthorized network location.

πŸŽ–@cveNotify
🚨 CVE-2026-34026
Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, contains a path traversal vulnerability in the documentName parameter of the /safe/selfservice/openselfservicedocument endpoint. The application constructs a file path using attacker-controlled input without sufficient validation, allowing an authenticated attacker with any role or permission level to traverse out of the intended document directory and download arbitrary files accessible to the application. This includes, but is not limited to, application log files containing sensitive information and application binaries.

πŸŽ–@cveNotify
🚨 CVE-2026-34027
The Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, contains insufficient server-side file type validation in the /safe/contract/uploadcustomdocuments endpoint. The application validates uploaded files based on the user-controlled HTTP Content-Type value and accepts the upload if this value contains an allowed string such as pdf, jpeg, tiff, or png. An authenticated attacker with any role or permission level can spoof the Content-Type value and upload arbitrary file content.

πŸŽ–@cveNotify
🚨 CVE-2026-34028
The Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, exposes web-accessible file paths that are not protected by an authorization scheme. An unauthenticated attacker can directly access HTTP endpoints to download files from locations such as /Resources/CompanyId_[ID]/Audio/ and /SafeData/.

πŸŽ–@cveNotify
🚨 CVE-2026-34029
The Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, contains a hard-coded cryptographic key in the SafeSystem.Infrastructure.Security.dll component. An attacker with access to the application files can reverse engineer the DLL and recover the hard-coded cryptographic key. This key can be used to decrypt the licence.whs file, which contains sensitive information about the licensing party and a second key that can be used to decrypt other configuration files.

πŸŽ–@cveNotify
🚨 CVE-2026-34030
The Wertheim SafeController Software, AssemblyVersion 6.15.8328.28014, does not sufficiently validate the branch code when a new branch is created. The branch code is later used in multiple application functions, including filesystem path generation for uploaded files, profile pictures, and settings. An authenticated attacker with the settings_branches_manage privilege can include path traversal sequences in the branch code and influence the final filesystem location used by affected file operations. This can allow files to be stored in unintended locations, subject to service-account write permissions and branch-code length restrictions.

πŸŽ–@cveNotify