🚨 CVE-2022-35278
In Apache ActiveMQ Artemis prior to 2.24.0, an attacker could show malicious content and/or redirect users to a malicious URL in the web console by using HTML in the name of an address or queue.
🎖@cveNotify
In Apache ActiveMQ Artemis prior to 2.24.0, an attacker could show malicious content and/or redirect users to a malicious URL in the web console by using HTML in the name of an address or queue.
🎖@cveNotify
🚨 CVE-2021-4040
A flaw was found in AMQ Broker. This issue can cause a partial interruption to the availability of AMQ Broker via an Out of memory (OOM) condition. This flaw allows an attacker to partially disrupt availability to the broker through a sustained attack of maliciously crafted messages. The highest threat from this vulnerability is system availability.
🎖@cveNotify
A flaw was found in AMQ Broker. This issue can cause a partial interruption to the availability of AMQ Broker via an Out of memory (OOM) condition. This flaw allows an attacker to partially disrupt availability to the broker through a sustained attack of maliciously crafted messages. The highest threat from this vulnerability is system availability.
🎖@cveNotify
🚨 CVE-2023-50780
Apache ActiveMQ Artemis allows access to diagnostic information and controls through MBeans, which are also exposed through the authenticated Jolokia endpoint. Before version 2.29.0, this also included the Log4J2 MBean. This MBean is not meant for exposure to non-administrative users. This could eventually allow an authenticated attacker to write arbitrary files to the filesystem and indirectly achieve RCE.
Users are recommended to upgrade to version 2.29.0 or later, which fixes the issue.
🎖@cveNotify
Apache ActiveMQ Artemis allows access to diagnostic information and controls through MBeans, which are also exposed through the authenticated Jolokia endpoint. Before version 2.29.0, this also included the Log4J2 MBean. This MBean is not meant for exposure to non-administrative users. This could eventually allow an authenticated attacker to write arbitrary files to the filesystem and indirectly achieve RCE.
Users are recommended to upgrade to version 2.29.0 or later, which fixes the issue.
🎖@cveNotify
🚨 CVE-2025-27427
A vulnerability exists in Apache ActiveMQ Artemis whereby a user with the createDurableQueue or createNonDurableQueue permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. When combined with the send permission and automatic queue creation a user could successfully send a message with a routing-type not supported by the address when that message should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address.
This issue affects Apache ActiveMQ Artemis from 2.0.0 through 2.39.0.
Users are recommended to upgrade to version 2.40.0 which fixes the issue.
🎖@cveNotify
A vulnerability exists in Apache ActiveMQ Artemis whereby a user with the createDurableQueue or createNonDurableQueue permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. When combined with the send permission and automatic queue creation a user could successfully send a message with a routing-type not supported by the address when that message should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address.
This issue affects Apache ActiveMQ Artemis from 2.0.0 through 2.39.0.
Users are recommended to upgrade to version 2.40.0 which fixes the issue.
🎖@cveNotify
🚨 CVE-2025-27391
Insertion of Sensitive Information into Log File vulnerability in Apache ActiveMQ Artemis. All the values of the broker properties are logged when the org.apache.activemq.artemis.core.config.impl.ConfigurationImpl logger has the debug level enabled.
This issue affects Apache ActiveMQ Artemis: from 1.5.1 before 2.40.0. It can be mitigated by restricting log access to only trusted users.
Users are recommended to upgrade to version 2.40.0, which fixes the issue.
🎖@cveNotify
Insertion of Sensitive Information into Log File vulnerability in Apache ActiveMQ Artemis. All the values of the broker properties are logged when the org.apache.activemq.artemis.core.config.impl.ConfigurationImpl logger has the debug level enabled.
This issue affects Apache ActiveMQ Artemis: from 1.5.1 before 2.40.0. It can be mitigated by restricting log access to only trusted users.
Users are recommended to upgrade to version 2.40.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-27446
Missing Authentication for Critical Function (CWE-306) vulnerability in Apache Artemis, Apache ActiveMQ Artemis. An unauthenticated remote attacker can use the Core protocol to force a target broker to establish an outbound Core federation connection to an attacker-controlled rogue broker. This could potentially result in message injection into any queue and/or message exfiltration from any queue via the rogue broker. This impacts environments that allow both:
- incoming Core protocol connections from untrusted sources to the broker
- outgoing Core protocol connections from the broker to untrusted targets
This issue affects:
- Apache Artemis from 2.50.0 through 2.51.0
- Apache ActiveMQ Artemis from 2.11.0 through 2.44.0.
Users are recommended to upgrade to Apache Artemis version 2.52.0, which fixes the issue.
The issue can be mitigated by one of the following:
- Remove Core protocol support from any acceptor receiving connections from untrusted sources. Incoming Core protocol connections are supported by default via the "artemis" acceptor listening on port 61616. See the "protocols" URL parameter configured for the acceptor. An acceptor URL without this parameter supports all protocols by default, including Core.
- Use two-way SSL (i.e. certificate-based authentication) in order to force every client to present the proper SSL certificate when establishing a connection before any message protocol handshake is attempted. This will prevent unauthenticated exploitation of this vulnerability.
- Implement and deploy a Core interceptor to deny all Core downstream federation connect packets. Such packets have a type of (int) -16 or (byte) 0xfffffff0. Documentation for interceptors is available at https://artemis.apache.org/components/artemis/documentation/latest/intercepting-operations.html .
🎖@cveNotify
Missing Authentication for Critical Function (CWE-306) vulnerability in Apache Artemis, Apache ActiveMQ Artemis. An unauthenticated remote attacker can use the Core protocol to force a target broker to establish an outbound Core federation connection to an attacker-controlled rogue broker. This could potentially result in message injection into any queue and/or message exfiltration from any queue via the rogue broker. This impacts environments that allow both:
- incoming Core protocol connections from untrusted sources to the broker
- outgoing Core protocol connections from the broker to untrusted targets
This issue affects:
- Apache Artemis from 2.50.0 through 2.51.0
- Apache ActiveMQ Artemis from 2.11.0 through 2.44.0.
Users are recommended to upgrade to Apache Artemis version 2.52.0, which fixes the issue.
The issue can be mitigated by one of the following:
- Remove Core protocol support from any acceptor receiving connections from untrusted sources. Incoming Core protocol connections are supported by default via the "artemis" acceptor listening on port 61616. See the "protocols" URL parameter configured for the acceptor. An acceptor URL without this parameter supports all protocols by default, including Core.
- Use two-way SSL (i.e. certificate-based authentication) in order to force every client to present the proper SSL certificate when establishing a connection before any message protocol handshake is attempted. This will prevent unauthenticated exploitation of this vulnerability.
- Implement and deploy a Core interceptor to deny all Core downstream federation connect packets. Such packets have a type of (int) -16 or (byte) 0xfffffff0. Documentation for interceptors is available at https://artemis.apache.org/components/artemis/documentation/latest/intercepting-operations.html .
🎖@cveNotify
🚨 CVE-2026-32642
Incorrect Authorization (CWE-863) vulnerability in Apache Artemis, Apache ActiveMQ Artemis exists when an application using the OpenWire protocol attempts to create a non-durable JMS topic subscription on an address that doesn't exist with an authenticated user which has the "createDurableQueue" permission but does not have the "createAddress" permission and address auto-creation is disabled. In this circumstance, a temporary address will be created whereas the attempt to create the non-durable subscription should instead fail since the user is not authorized to create the corresponding address. When the OpenWire connection is closed the address is removed.
This issue affects Apache Artemis: from 2.50.0 through 2.52.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.53.0, which fixes the issue.
🎖@cveNotify
Incorrect Authorization (CWE-863) vulnerability in Apache Artemis, Apache ActiveMQ Artemis exists when an application using the OpenWire protocol attempts to create a non-durable JMS topic subscription on an address that doesn't exist with an authenticated user which has the "createDurableQueue" permission but does not have the "createAddress" permission and address auto-creation is disabled. In this circumstance, a temporary address will be created whereas the attempt to create the non-durable subscription should instead fail since the user is not authorized to create the corresponding address. When the OpenWire connection is closed the address is removed.
This issue affects Apache Artemis: from 2.50.0 through 2.52.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.53.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-40914
A vulnerability exists in Apache Artemis whereby an application using the STOMP protocol with security credentials that grant either the consume or send permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. A user could successfully send a message to an address or consume a message from a queue with a routing-type not supported by the corresponding address when that operation should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address. Even though the user was already granted permission to send and/or consume messages, they should not be able to augment the routing-type of the address without the createAddress permission.
This issue affects Apache Artemis: from 2.50.0 through 2.53.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.54.0, which fixes the issue.
🎖@cveNotify
A vulnerability exists in Apache Artemis whereby an application using the STOMP protocol with security credentials that grant either the consume or send permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. A user could successfully send a message to an address or consume a message from a queue with a routing-type not supported by the corresponding address when that operation should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address. Even though the user was already granted permission to send and/or consume messages, they should not be able to augment the routing-type of the address without the createAddress permission.
This issue affects Apache Artemis: from 2.50.0 through 2.53.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.54.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-52859
Vim is an open source, command line text editor. Prior to version 9.2.0565, the update_snapshot() function in src/terminal.c copies the visible terminal screen into the scrollback buffer when a snapshot is taken. For each screen cell it walks the cell's chars[] array with no upper bound, stopping only when it encounters a NUL terminator. When a cell legitimately fills all VTERM_MAX_CHARS_PER_CELL (6) slots — a base character plus five combining marks — the bundled libvterm returns the array without a terminating NUL, so the loop reads past the fixed six-element array and appends the out-of-bounds values to a buffer reserved for only six characters. A program whose output is rendered inside a :terminal window can trigger this with a short byte sequence and no Vim scripting, leading to a crash. This issue has been patched in version 9.2.0565.
🎖@cveNotify
Vim is an open source, command line text editor. Prior to version 9.2.0565, the update_snapshot() function in src/terminal.c copies the visible terminal screen into the scrollback buffer when a snapshot is taken. For each screen cell it walks the cell's chars[] array with no upper bound, stopping only when it encounters a NUL terminator. When a cell legitimately fills all VTERM_MAX_CHARS_PER_CELL (6) slots — a base character plus five combining marks — the bundled libvterm returns the array without a terminating NUL, so the loop reads past the fixed six-element array and appends the out-of-bounds values to a buffer reserved for only six characters. A program whose output is rendered inside a :terminal window can trigger this with a short byte sequence and no Vim scripting, leading to a crash. This issue has been patched in version 9.2.0565.
🎖@cveNotify
GitHub
patch 9.2.0565: [security]: out-of-bounds read in update_snapshot() · vim/vim@63680c6
Problem: Out-of-bounds read in update_snapshot() when a terminal cell
fills all VTERM_MAX_CHARS_PER_CELL slots (a base character
plus five combining marks): the loop over cell....
fills all VTERM_MAX_CHARS_PER_CELL slots (a base character
plus five combining marks): the loop over cell....
🚨 CVE-2026-50261
A use-after-free flaw was found in the X.Org X server and Xwayland in SyncChangeCounter(). A client that sets up multiple SyncCounters can trigger a use-after-free when destroying those counters via a second client connection while changing those counters. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
A use-after-free flaw was found in the X.Org X server and Xwayland in SyncChangeCounter(). A client that sets up multiple SyncCounters can trigger a use-after-free when destroying those counters via a second client connection while changing those counters. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
🚨 CVE-2026-50262
An out-of-bounds read flaw was found in the X.Org X server and Xwayland in __glXDisp_ChangeDrawableAttributes(). A wrong size validation check can read a client-controlled number of bytes, exceeding the request buffer, leading to information disclosure. A write path also exists but requires byte-swapped clients which is disabled by default.
🎖@cveNotify
An out-of-bounds read flaw was found in the X.Org X server and Xwayland in __glXDisp_ChangeDrawableAttributes(). A wrong size validation check can read a client-controlled number of bytes, exceeding the request buffer, leading to information disclosure. A write path also exists but requires byte-swapped clients which is disabled by default.
🎖@cveNotify
🚨 CVE-2026-47167
Vim is an open source, command line text editor. Prior to version 9.2.0496, a code injection vulnerability exists in s:stepmatch() in the cucumber filetype plugin (runtime/ftplugin/cucumber.vim) on Vim builds with +ruby support. Step-definition patterns read from .rb files under the repository's features/*/ or stories/*/ directories are embedded into a Ruby Kernel.eval argument without sufficient escaping, allowing a crafted pattern in an attacker-controlled repository to execute arbitrary Ruby (and through it arbitrary shell commands) when the user invokes a step-jump mapping ([d, ]d). This issue has been patched in version 9.2.0496.
🎖@cveNotify
Vim is an open source, command line text editor. Prior to version 9.2.0496, a code injection vulnerability exists in s:stepmatch() in the cucumber filetype plugin (runtime/ftplugin/cucumber.vim) on Vim builds with +ruby support. Step-definition patterns read from .rb files under the repository's features/*/ or stories/*/ directories are embedded into a Ruby Kernel.eval argument without sufficient escaping, allowing a crafted pattern in an attacker-controlled repository to execute arbitrary Ruby (and through it arbitrary shell commands) when the user invokes a step-jump mapping ([d, ]d). This issue has been patched in version 9.2.0496.
🎖@cveNotify
GitHub
patch 9.2.0496: [security]: Code Injection in cucumber filetype plugin · vim/vim@a65a52d
Problem: [security]: Code Injection in cucumber filetype plugin
(Christopher Lusk)
Solution: Use rubys Regexp.new() with the untrusted pattern
Github Security Advisory:
https://github.c...
(Christopher Lusk)
Solution: Use rubys Regexp.new() with the untrusted pattern
Github Security Advisory:
https://github.c...
🚨 CVE-2026-52858
Vim is an open source, command line text editor. Prior to version 9.2.0561, the Python omni-completion script in python3complete.vim for Vim with the +python3 interpreter enabled (and the legacy pythoncomplete.vim for builds with the +python interpreter) executes the import and from statements found in the current buffer through Python's import machinery. Because the buffer's working directory is on sys.path, opening a hostile .py file with a sibling Python package and invoking omni-completion runs that package's top-level code as the editing user. This issue has been patched in version 9.2.0561.
🎖@cveNotify
Vim is an open source, command line text editor. Prior to version 9.2.0561, the Python omni-completion script in python3complete.vim for Vim with the +python3 interpreter enabled (and the legacy pythoncomplete.vim for builds with the +python interpreter) executes the import and from statements found in the current buffer through Python's import machinery. Because the buffer's working directory is on sys.path, opening a hostile .py file with a sibling Python package and invoking omni-completion runs that package's top-level code as the editing user. This issue has been patched in version 9.2.0561.
🎖@cveNotify
GitHub
patch 9.2.0561: [security]: possible code execution with python3complete · vim/vim@4b85045
Problem: [security]: possible code execution with python3complete
Solution: Disable execution of import/from statements
Github Security Advisory:
https://github.com/vim/vim/security/advisories/GH...
Solution: Disable execution of import/from statements
Github Security Advisory:
https://github.com/vim/vim/security/advisories/GH...
🚨 CVE-2026-52860
Vim is an open source, command line text editor. Prior to version 9.2.0597, Vim's Python omni-completion executes reconstructed function and class definitions from the current buffer with exec() as part of populating the completion dictionary. Python evaluates function default values, parameter annotations, and class base expressions at definition time, so a hostile buffer can execute attacker-controlled Python expressions during omni-completion. The existing g:pythoncomplete_allow_import mitigation (GHSA-52mc-rq6p-rc7c) does not cover this path, because the attacker-controlled code is not a harvested import/from statement. This issue has been patched in version 9.2.0597.
🎖@cveNotify
Vim is an open source, command line text editor. Prior to version 9.2.0597, Vim's Python omni-completion executes reconstructed function and class definitions from the current buffer with exec() as part of populating the completion dictionary. Python evaluates function default values, parameter annotations, and class base expressions at definition time, so a hostile buffer can execute attacker-controlled Python expressions during omni-completion. The existing g:pythoncomplete_allow_import mitigation (GHSA-52mc-rq6p-rc7c) does not cover this path, because the attacker-controlled code is not a harvested import/from statement. This issue has been patched in version 9.2.0597.
🎖@cveNotify
GitHub
patch 9.2.0597: [security]: possible code execution with python complete · vim/vim@c8c6367
Problem: [security]: another possible code execution with python complete
(David Carliez)
Solution: Strip default expressions and annotations from generated
source for pythonco...
(David Carliez)
Solution: Strip default expressions and annotations from generated
source for pythonco...
🚨 CVE-2024-39011
Prototype Pollution in chargeover redoc v2.0.9-rc.69 allows attackers to execute arbitrary code or cause a Denial of Service (DoS) and cause other impacts via the function mergeObjects.
🎖@cveNotify
Prototype Pollution in chargeover redoc v2.0.9-rc.69 allows attackers to execute arbitrary code or cause a Denial of Service (DoS) and cause other impacts via the function mergeObjects.
🎖@cveNotify
Gist
[CVE-2024-39011] Vulnerability Advisory: Prototype Pollution in @chargeover/redoc, version 2.0.9-rc.69
[CVE-2024-39011] Vulnerability Advisory: Prototype Pollution in @chargeover/redoc, version 2.0.9-rc.69 - Advisory_Redocly.md
🚨 CVE-2026-46476
Flowise is a drag & drop user interface to build a customized large language model flow. Prior to version 3.1.2, CustomTemplate create and update mass-assignment allows cross-workspace template takeover. This issue has been patched in version 3.1.2.
🎖@cveNotify
Flowise is a drag & drop user interface to build a customized large language model flow. Prior to version 3.1.2, CustomTemplate create and update mass-assignment allows cross-workspace template takeover. This issue has been patched in version 3.1.2.
🎖@cveNotify
GitHub
Release flowise@3.1.2 · FlowiseAI/Flowise
What's Changed
Hardcoded CORS wildcard on TTS endpoint enables cross-origin credential abuse from any webpage by @christopherholland-workday in #5901
Additional Improvements to MCP Server Conf...
Hardcoded CORS wildcard on TTS endpoint enables cross-origin credential abuse from any webpage by @christopherholland-workday in #5901
Additional Improvements to MCP Server Conf...
🚨 CVE-2026-46477
Flowise is a drag & drop user interface to build a customized large language model flow. Prior to version 3.1.2, dataset create and update mass-assignment allows cross-workspace dataset takeover. This issue has been patched in version 3.1.2.
🎖@cveNotify
Flowise is a drag & drop user interface to build a customized large language model flow. Prior to version 3.1.2, dataset create and update mass-assignment allows cross-workspace dataset takeover. This issue has been patched in version 3.1.2.
🎖@cveNotify
GitHub
Release flowise@3.1.2 · FlowiseAI/Flowise
What's Changed
Hardcoded CORS wildcard on TTS endpoint enables cross-origin credential abuse from any webpage by @christopherholland-workday in #5901
Additional Improvements to MCP Server Conf...
Hardcoded CORS wildcard on TTS endpoint enables cross-origin credential abuse from any webpage by @christopherholland-workday in #5901
Additional Improvements to MCP Server Conf...
🚨 CVE-2026-45650
User interface (ui) misrepresentation of critical information in Microsoft Bing allows an unauthorized attacker to perform spoofing over a network.
🎖@cveNotify
User interface (ui) misrepresentation of critical information in Microsoft Bing allows an unauthorized attacker to perform spoofing over a network.
🎖@cveNotify
🚨 CVE-2026-47281
Improper input validation in Visual Studio Code allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
Improper input validation in Visual Studio Code allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
🚨 CVE-2026-47284
Exposure of sensitive information to an unauthorized actor in Visual Studio Code allows an unauthorized attacker to disclose information over a network.
🎖@cveNotify
Exposure of sensitive information to an unauthorized actor in Visual Studio Code allows an unauthorized attacker to disclose information over a network.
🎖@cveNotify
🚨 CVE-2022-32511
jmespath.rb (aka JMESPath for Ruby) before 1.6.1 uses JSON.load in a situation where JSON.parse is preferable.
🎖@cveNotify
jmespath.rb (aka JMESPath for Ruby) before 1.6.1 uses JSON.load in a situation where JSON.parse is preferable.
🎖@cveNotify
GitHub
Comparing v1.6.0...v1.6.1 · jmespath/jmespath.rb
Ruby implementation of JMESPath. Contribute to jmespath/jmespath.rb development by creating an account on GitHub.