🚨 CVE-2026-46280
In the Linux kernel, the following vulnerability has been resolved:
lib: test_hmm: evict device pages on file close to avoid use-after-free
Patch series "Minor hmm_test fixes and cleanups".
Two bugfixes a cleanup for the HMM kernel selftests. These were mostly
reported by Zenghui Yu with special thanks to Lorenzo for analysing and
pointing out the problems.
This patch (of 3):
When dmirror_fops_release() is called it frees the dmirror struct but
doesn't migrate device private pages back to system memory first. This
leaves those pages with a dangling zone_device_data pointer to the freed
dmirror.
If a subsequent fault occurs on those pages (eg. during coredump) the
dmirror_devmem_fault() callback dereferences the stale pointer causing a
kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64,
where a test failure triggered SIGABRT and the resulting coredump walked
the VMAs faulting in the stale device private pages.
Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in
dmirror_fops_release() to migrate all device private pages back to system
memory before freeing the dmirror struct. The function is moved earlier
in the file to avoid a forward declaration.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
lib: test_hmm: evict device pages on file close to avoid use-after-free
Patch series "Minor hmm_test fixes and cleanups".
Two bugfixes a cleanup for the HMM kernel selftests. These were mostly
reported by Zenghui Yu with special thanks to Lorenzo for analysing and
pointing out the problems.
This patch (of 3):
When dmirror_fops_release() is called it frees the dmirror struct but
doesn't migrate device private pages back to system memory first. This
leaves those pages with a dangling zone_device_data pointer to the freed
dmirror.
If a subsequent fault occurs on those pages (eg. during coredump) the
dmirror_devmem_fault() callback dereferences the stale pointer causing a
kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64,
where a test failure triggered SIGABRT and the resulting coredump walked
the VMAs faulting in the stale device private pages.
Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in
dmirror_fops_release() to migrate all device private pages back to system
memory before freeing the dmirror struct. The function is moved earlier
in the file to avoid a forward declaration.
🎖@cveNotify
🚨 CVE-2026-46288
In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix use-after-free in of_unittest_changeset()
The variable 'parent' is assigned the value of 'nchangeset' earlier in the
function, meaning both point to the same struct device_node. The call to
of_node_put(nchangeset) can decrement the reference count to zero and
free the node if there are no other holders. After that, the code still
uses 'parent' to check for the presence of a property and to read a
string property, leading to a use-after-free.
Fix this by moving the of_node_put() call after the last access to
'parent', avoiding the UAF.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix use-after-free in of_unittest_changeset()
The variable 'parent' is assigned the value of 'nchangeset' earlier in the
function, meaning both point to the same struct device_node. The call to
of_node_put(nchangeset) can decrement the reference count to zero and
free the node if there are no other holders. After that, the code still
uses 'parent' to check for the presence of a property and to read a
string property, leading to a use-after-free.
Fix this by moving the of_node_put() call after the last access to
'parent', avoiding the UAF.
🎖@cveNotify
🚨 CVE-2026-46289
In the Linux kernel, the following vulnerability has been resolved:
lib/scatterlist: fix length calculations in extract_kvec_to_sg
Patch series "Fix bugs in extract_iter_to_sg()", v3.
Fix bugs in the kvec and user variants of extract_iter_to_sg. This series
is growing due to useful remarks made by sashiko.dev.
The main bugs are:
- The length for an sglist entry when extracting from
a kvec can exceed the number of bytes in the page. This
is obviously not intended.
- When extracting a user buffer the sglist is temporarily
used as a scratch buffer for extracted page pointers.
If the sglist already contains some elements this scratch
buffer could overlap with existing entries in the sglist.
The series adds test cases to the kunit_iov_iter test that demonstrate all
of these bugs. Additionally, there is a memory leak fix for the test
itself.
The bugs were orignally introduced into kernel v6.3 where the function
lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in
v6.5. Thus the actual fix is only marked for backports to v6.5+.
This patch (of 5):
When extracting from a kvec to a scatterlist, do not cross page
boundaries. The required length was already calculated but not used as
intended.
Adjust the copied length if the loop runs out of sglist entries without
extracting everything.
While there, return immediately from extract_iter_to_sg if there are no
sglist entries at all.
A subsequent commit will add kunit test cases that demonstrate that the
patch is necessary.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
lib/scatterlist: fix length calculations in extract_kvec_to_sg
Patch series "Fix bugs in extract_iter_to_sg()", v3.
Fix bugs in the kvec and user variants of extract_iter_to_sg. This series
is growing due to useful remarks made by sashiko.dev.
The main bugs are:
- The length for an sglist entry when extracting from
a kvec can exceed the number of bytes in the page. This
is obviously not intended.
- When extracting a user buffer the sglist is temporarily
used as a scratch buffer for extracted page pointers.
If the sglist already contains some elements this scratch
buffer could overlap with existing entries in the sglist.
The series adds test cases to the kunit_iov_iter test that demonstrate all
of these bugs. Additionally, there is a memory leak fix for the test
itself.
The bugs were orignally introduced into kernel v6.3 where the function
lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in
v6.5. Thus the actual fix is only marked for backports to v6.5+.
This patch (of 5):
When extracting from a kvec to a scatterlist, do not cross page
boundaries. The required length was already calculated but not used as
intended.
Adjust the copied length if the loop runs out of sglist entries without
extracting everything.
While there, return immediately from extract_iter_to_sg if there are no
sglist entries at all.
A subsequent commit will add kunit test cases that demonstrate that the
patch is necessary.
🎖@cveNotify
🚨 CVE-2025-15546
The Iptanus File Upload WordPress plugin before 5.1.7 does not implement proper file handling when the duplicatepolicy setting is configured to "maintain both." Due to a Time-of-Check to Time-of-Use (TOCTOU) race condition between the file existence check and the actual file write operation, an authenticated attacker can overwrite files uploaded by other users.
🎖@cveNotify
The Iptanus File Upload WordPress plugin before 5.1.7 does not implement proper file handling when the duplicatepolicy setting is configured to "maintain both." Due to a Time-of-Check to Time-of-Use (TOCTOU) race condition between the file existence check and the actual file write operation, an authenticated attacker can overwrite files uploaded by other users.
🎖@cveNotify
WPScan
Iptanus File Upload < 5.1.7 - File Overwrite via Race Condition
See details on Iptanus File Upload < 5.1.7 - File Overwrite via Race Condition CVE 2025-15546. View the latest Plugin Vulnerabilities on WPScan.
🚨 CVE-2016-4978
The getObject method of the javax.jms.ObjectMessage class in the (1) JMS Core client, (2) Artemis broker, and (3) Artemis REST component in Apache ActiveMQ Artemis before 1.4.0 might allow remote authenticated users with permission to send messages to the Artemis broker to deserialize arbitrary objects and execute arbitrary code by leveraging gadget classes being present on the Artemis classpath.
🎖@cveNotify
The getObject method of the javax.jms.ObjectMessage class in the (1) JMS Core client, (2) Artemis broker, and (3) Artemis REST component in Apache ActiveMQ Artemis before 1.4.0 might allow remote authenticated users with permission to send messages to the Artemis broker to deserialize arbitrary objects and execute arbitrary code by leveraging gadget classes being present on the Artemis classpath.
🎖@cveNotify
🚨 CVE-2017-12174
It was found that when Artemis and HornetQ before 2.4.0 are configured with UDP discovery and JGroups discovery a huge byte array is created when receiving an unexpected multicast message. This may result in a heap memory exhaustion, full GC, or OutOfMemoryError.
🎖@cveNotify
It was found that when Artemis and HornetQ before 2.4.0 are configured with UDP discovery and JGroups discovery a huge byte array is created when receiving an unexpected multicast message. This may result in a heap memory exhaustion, full GC, or OutOfMemoryError.
🎖@cveNotify
🚨 CVE-2020-10727
A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.
🎖@cveNotify
A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.
🎖@cveNotify
🚨 CVE-2020-13932
In Apache ActiveMQ Artemis 2.5.0 to 2.13.0, a specially crafted MQTT packet which has an XSS payload as client-id or topic name can exploit this vulnerability. The XSS payload is being injected into the admin console's browser. The XSS payload is triggered in the diagram plugin; queue node and the info section.
🎖@cveNotify
In Apache ActiveMQ Artemis 2.5.0 to 2.13.0, a specially crafted MQTT packet which has an XSS payload as client-id or topic name can exploit this vulnerability. The XSS payload is being injected into the admin console's browser. The XSS payload is triggered in the diagram plugin; queue node and the info section.
🎖@cveNotify
🚨 CVE-2021-26117
The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password.
🎖@cveNotify
The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password.
🎖@cveNotify
🚨 CVE-2021-26118
While investigating ARTEMIS-2964 it was found that the creation of advisory messages in the OpenWire protocol head of Apache ActiveMQ Artemis 2.15.0 bypassed policy based access control for the entire session. Production of advisory messages was not subject to access control in error.
🎖@cveNotify
While investigating ARTEMIS-2964 it was found that the creation of advisory messages in the OpenWire protocol head of Apache ActiveMQ Artemis 2.15.0 bypassed policy based access control for the entire session. Production of advisory messages was not subject to access control in error.
🎖@cveNotify
🚨 CVE-2022-23913
In Apache ActiveMQ Artemis prior to 2.20.0 or 2.19.1, an attacker could partially disrupt availability (DoS) through uncontrolled resource consumption of memory.
🎖@cveNotify
In Apache ActiveMQ Artemis prior to 2.20.0 or 2.19.1, an attacker could partially disrupt availability (DoS) through uncontrolled resource consumption of memory.
🎖@cveNotify
🚨 CVE-2022-35278
In Apache ActiveMQ Artemis prior to 2.24.0, an attacker could show malicious content and/or redirect users to a malicious URL in the web console by using HTML in the name of an address or queue.
🎖@cveNotify
In Apache ActiveMQ Artemis prior to 2.24.0, an attacker could show malicious content and/or redirect users to a malicious URL in the web console by using HTML in the name of an address or queue.
🎖@cveNotify
🚨 CVE-2021-4040
A flaw was found in AMQ Broker. This issue can cause a partial interruption to the availability of AMQ Broker via an Out of memory (OOM) condition. This flaw allows an attacker to partially disrupt availability to the broker through a sustained attack of maliciously crafted messages. The highest threat from this vulnerability is system availability.
🎖@cveNotify
A flaw was found in AMQ Broker. This issue can cause a partial interruption to the availability of AMQ Broker via an Out of memory (OOM) condition. This flaw allows an attacker to partially disrupt availability to the broker through a sustained attack of maliciously crafted messages. The highest threat from this vulnerability is system availability.
🎖@cveNotify
🚨 CVE-2023-50780
Apache ActiveMQ Artemis allows access to diagnostic information and controls through MBeans, which are also exposed through the authenticated Jolokia endpoint. Before version 2.29.0, this also included the Log4J2 MBean. This MBean is not meant for exposure to non-administrative users. This could eventually allow an authenticated attacker to write arbitrary files to the filesystem and indirectly achieve RCE.
Users are recommended to upgrade to version 2.29.0 or later, which fixes the issue.
🎖@cveNotify
Apache ActiveMQ Artemis allows access to diagnostic information and controls through MBeans, which are also exposed through the authenticated Jolokia endpoint. Before version 2.29.0, this also included the Log4J2 MBean. This MBean is not meant for exposure to non-administrative users. This could eventually allow an authenticated attacker to write arbitrary files to the filesystem and indirectly achieve RCE.
Users are recommended to upgrade to version 2.29.0 or later, which fixes the issue.
🎖@cveNotify
🚨 CVE-2025-27427
A vulnerability exists in Apache ActiveMQ Artemis whereby a user with the createDurableQueue or createNonDurableQueue permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. When combined with the send permission and automatic queue creation a user could successfully send a message with a routing-type not supported by the address when that message should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address.
This issue affects Apache ActiveMQ Artemis from 2.0.0 through 2.39.0.
Users are recommended to upgrade to version 2.40.0 which fixes the issue.
🎖@cveNotify
A vulnerability exists in Apache ActiveMQ Artemis whereby a user with the createDurableQueue or createNonDurableQueue permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. When combined with the send permission and automatic queue creation a user could successfully send a message with a routing-type not supported by the address when that message should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address.
This issue affects Apache ActiveMQ Artemis from 2.0.0 through 2.39.0.
Users are recommended to upgrade to version 2.40.0 which fixes the issue.
🎖@cveNotify
🚨 CVE-2025-27391
Insertion of Sensitive Information into Log File vulnerability in Apache ActiveMQ Artemis. All the values of the broker properties are logged when the org.apache.activemq.artemis.core.config.impl.ConfigurationImpl logger has the debug level enabled.
This issue affects Apache ActiveMQ Artemis: from 1.5.1 before 2.40.0. It can be mitigated by restricting log access to only trusted users.
Users are recommended to upgrade to version 2.40.0, which fixes the issue.
🎖@cveNotify
Insertion of Sensitive Information into Log File vulnerability in Apache ActiveMQ Artemis. All the values of the broker properties are logged when the org.apache.activemq.artemis.core.config.impl.ConfigurationImpl logger has the debug level enabled.
This issue affects Apache ActiveMQ Artemis: from 1.5.1 before 2.40.0. It can be mitigated by restricting log access to only trusted users.
Users are recommended to upgrade to version 2.40.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-27446
Missing Authentication for Critical Function (CWE-306) vulnerability in Apache Artemis, Apache ActiveMQ Artemis. An unauthenticated remote attacker can use the Core protocol to force a target broker to establish an outbound Core federation connection to an attacker-controlled rogue broker. This could potentially result in message injection into any queue and/or message exfiltration from any queue via the rogue broker. This impacts environments that allow both:
- incoming Core protocol connections from untrusted sources to the broker
- outgoing Core protocol connections from the broker to untrusted targets
This issue affects:
- Apache Artemis from 2.50.0 through 2.51.0
- Apache ActiveMQ Artemis from 2.11.0 through 2.44.0.
Users are recommended to upgrade to Apache Artemis version 2.52.0, which fixes the issue.
The issue can be mitigated by one of the following:
- Remove Core protocol support from any acceptor receiving connections from untrusted sources. Incoming Core protocol connections are supported by default via the "artemis" acceptor listening on port 61616. See the "protocols" URL parameter configured for the acceptor. An acceptor URL without this parameter supports all protocols by default, including Core.
- Use two-way SSL (i.e. certificate-based authentication) in order to force every client to present the proper SSL certificate when establishing a connection before any message protocol handshake is attempted. This will prevent unauthenticated exploitation of this vulnerability.
- Implement and deploy a Core interceptor to deny all Core downstream federation connect packets. Such packets have a type of (int) -16 or (byte) 0xfffffff0. Documentation for interceptors is available at https://artemis.apache.org/components/artemis/documentation/latest/intercepting-operations.html .
🎖@cveNotify
Missing Authentication for Critical Function (CWE-306) vulnerability in Apache Artemis, Apache ActiveMQ Artemis. An unauthenticated remote attacker can use the Core protocol to force a target broker to establish an outbound Core federation connection to an attacker-controlled rogue broker. This could potentially result in message injection into any queue and/or message exfiltration from any queue via the rogue broker. This impacts environments that allow both:
- incoming Core protocol connections from untrusted sources to the broker
- outgoing Core protocol connections from the broker to untrusted targets
This issue affects:
- Apache Artemis from 2.50.0 through 2.51.0
- Apache ActiveMQ Artemis from 2.11.0 through 2.44.0.
Users are recommended to upgrade to Apache Artemis version 2.52.0, which fixes the issue.
The issue can be mitigated by one of the following:
- Remove Core protocol support from any acceptor receiving connections from untrusted sources. Incoming Core protocol connections are supported by default via the "artemis" acceptor listening on port 61616. See the "protocols" URL parameter configured for the acceptor. An acceptor URL without this parameter supports all protocols by default, including Core.
- Use two-way SSL (i.e. certificate-based authentication) in order to force every client to present the proper SSL certificate when establishing a connection before any message protocol handshake is attempted. This will prevent unauthenticated exploitation of this vulnerability.
- Implement and deploy a Core interceptor to deny all Core downstream federation connect packets. Such packets have a type of (int) -16 or (byte) 0xfffffff0. Documentation for interceptors is available at https://artemis.apache.org/components/artemis/documentation/latest/intercepting-operations.html .
🎖@cveNotify
🚨 CVE-2026-32642
Incorrect Authorization (CWE-863) vulnerability in Apache Artemis, Apache ActiveMQ Artemis exists when an application using the OpenWire protocol attempts to create a non-durable JMS topic subscription on an address that doesn't exist with an authenticated user which has the "createDurableQueue" permission but does not have the "createAddress" permission and address auto-creation is disabled. In this circumstance, a temporary address will be created whereas the attempt to create the non-durable subscription should instead fail since the user is not authorized to create the corresponding address. When the OpenWire connection is closed the address is removed.
This issue affects Apache Artemis: from 2.50.0 through 2.52.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.53.0, which fixes the issue.
🎖@cveNotify
Incorrect Authorization (CWE-863) vulnerability in Apache Artemis, Apache ActiveMQ Artemis exists when an application using the OpenWire protocol attempts to create a non-durable JMS topic subscription on an address that doesn't exist with an authenticated user which has the "createDurableQueue" permission but does not have the "createAddress" permission and address auto-creation is disabled. In this circumstance, a temporary address will be created whereas the attempt to create the non-durable subscription should instead fail since the user is not authorized to create the corresponding address. When the OpenWire connection is closed the address is removed.
This issue affects Apache Artemis: from 2.50.0 through 2.52.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.53.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-40914
A vulnerability exists in Apache Artemis whereby an application using the STOMP protocol with security credentials that grant either the consume or send permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. A user could successfully send a message to an address or consume a message from a queue with a routing-type not supported by the corresponding address when that operation should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address. Even though the user was already granted permission to send and/or consume messages, they should not be able to augment the routing-type of the address without the createAddress permission.
This issue affects Apache Artemis: from 2.50.0 through 2.53.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.54.0, which fixes the issue.
🎖@cveNotify
A vulnerability exists in Apache Artemis whereby an application using the STOMP protocol with security credentials that grant either the consume or send permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. A user could successfully send a message to an address or consume a message from a queue with a routing-type not supported by the corresponding address when that operation should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address. Even though the user was already granted permission to send and/or consume messages, they should not be able to augment the routing-type of the address without the createAddress permission.
This issue affects Apache Artemis: from 2.50.0 through 2.53.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.54.0, which fixes the issue.
🎖@cveNotify
🚨 CVE-2026-52859
Vim is an open source, command line text editor. Prior to version 9.2.0565, the update_snapshot() function in src/terminal.c copies the visible terminal screen into the scrollback buffer when a snapshot is taken. For each screen cell it walks the cell's chars[] array with no upper bound, stopping only when it encounters a NUL terminator. When a cell legitimately fills all VTERM_MAX_CHARS_PER_CELL (6) slots — a base character plus five combining marks — the bundled libvterm returns the array without a terminating NUL, so the loop reads past the fixed six-element array and appends the out-of-bounds values to a buffer reserved for only six characters. A program whose output is rendered inside a :terminal window can trigger this with a short byte sequence and no Vim scripting, leading to a crash. This issue has been patched in version 9.2.0565.
🎖@cveNotify
Vim is an open source, command line text editor. Prior to version 9.2.0565, the update_snapshot() function in src/terminal.c copies the visible terminal screen into the scrollback buffer when a snapshot is taken. For each screen cell it walks the cell's chars[] array with no upper bound, stopping only when it encounters a NUL terminator. When a cell legitimately fills all VTERM_MAX_CHARS_PER_CELL (6) slots — a base character plus five combining marks — the bundled libvterm returns the array without a terminating NUL, so the loop reads past the fixed six-element array and appends the out-of-bounds values to a buffer reserved for only six characters. A program whose output is rendered inside a :terminal window can trigger this with a short byte sequence and no Vim scripting, leading to a crash. This issue has been patched in version 9.2.0565.
🎖@cveNotify
GitHub
patch 9.2.0565: [security]: out-of-bounds read in update_snapshot() · vim/vim@63680c6
Problem: Out-of-bounds read in update_snapshot() when a terminal cell
fills all VTERM_MAX_CHARS_PER_CELL slots (a base character
plus five combining marks): the loop over cell....
fills all VTERM_MAX_CHARS_PER_CELL slots (a base character
plus five combining marks): the loop over cell....
🚨 CVE-2026-50261
A use-after-free flaw was found in the X.Org X server and Xwayland in SyncChangeCounter(). A client that sets up multiple SyncCounters can trigger a use-after-free when destroying those counters via a second client connection while changing those counters. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify
A use-after-free flaw was found in the X.Org X server and Xwayland in SyncChangeCounter(). A client that sets up multiple SyncCounters can trigger a use-after-free when destroying those counters via a second client connection while changing those counters. This may be used to crash the server, or for privilege escalation if the X server runs as root.
🎖@cveNotify