🚨 CVE-2026-47634
Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network.
🎖@cveNotify
Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network.
🎖@cveNotify
🚨 CVE-2026-47636
Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network.
🎖@cveNotify
Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network.
🎖@cveNotify
🚨 CVE-2026-44963
A vulnerability allowing remote code execution (RCE) on the Backup Server by an authenticated domain user.
🎖@cveNotify
A vulnerability allowing remote code execution (RCE) on the Backup Server by an authenticated domain user.
🎖@cveNotify
Veeam Software
KB4869: Vulnerability Resolved in Veeam Backup & Replication 12.3.2.4854
🚨 CVE-2026-44505
Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. network-libp2p handles kad get-record query progress in handle_dht_get (network-libp2p/src/swarm.rs). Prior to version 1.4.0, when a peer returns a FoundRecord, the code verifies the record via dht_verifier.verify(&record.record). On verifier error, handle_dht_get logs and returns early without completing the oneshot used by Network::dht_get, and without cleaning up per-query bookkeeping. Later query progress can hit the "DHT inconsistent state" path and also return without cleanup. Because Network::dht_get awaits the oneshot without a timeout, the caller future can hang indefinitely. This issue has been patched in version 1.4.0.
🎖@cveNotify
Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. network-libp2p handles kad get-record query progress in handle_dht_get (network-libp2p/src/swarm.rs). Prior to version 1.4.0, when a peer returns a FoundRecord, the code verifies the record via dht_verifier.verify(&record.record). On verifier error, handle_dht_get logs and returns early without completing the oneshot used by Network::dht_get, and without cleaning up per-query bookkeeping. Later query progress can hit the "DHT inconsistent state" path and also return without cleanup. Because Network::dht_get awaits the oneshot without a timeout, the caller future can hang indefinitely. This issue has been patched in version 1.4.0.
🎖@cveNotify
GitHub
Fix DHT GetRecord query wedge on untrusted peer responses by jsdanielh · Pull Request #3716 · nimiq/core-rs-albatross
An untrusted peer could respond to a DHT GetRecord query in ways that left the query in an inconsistent state, preventing it from ever completing and wedging the requester.
This change:
Adds DhtGe...
This change:
Adds DhtGe...
🚨 CVE-2026-46144
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix error unwind in mana_ib_create_qp_rss()
Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal
destroy path cleans it up.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix error unwind in mana_ib_create_qp_rss()
Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal
destroy path cleans it up.
🎖@cveNotify
🚨 CVE-2026-46145
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Validate rx_hash_key_len
Sashiko points out that rx_hash_key_len comes from a uAPI structure and is
blindly passed to memcpy, allowing the userspace to trash kernel
memory. Bounds check it so the memcpy cannot overflow.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Validate rx_hash_key_len
Sashiko points out that rx_hash_key_len comes from a uAPI structure and is
blindly passed to memcpy, allowing the userspace to trash kernel
memory. Bounds check it so the memcpy cannot overflow.
🎖@cveNotify
🚨 CVE-2026-46146
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole.
🎖@cveNotify
🚨 CVE-2026-46147
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the existing 'unlock' label.
2. register_hyp_vcpu() publishes the new vCPU pointer into
'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller
of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU
object.
Ensure the store uses smp_store_release() and the load uses
smp_load_acquire(). While 'vm_table_lock' currently serialises the
store and the load, these barriers ensure the reader sees the fully
initialised 'hyp_vcpu' object even if there were a lockless path or
if the lock's own ordering guarantees were insufficient for nested
object initialization.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the existing 'unlock' label.
2. register_hyp_vcpu() publishes the new vCPU pointer into
'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller
of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU
object.
Ensure the store uses smp_store_release() and the load uses
smp_load_acquire(). While 'vm_table_lock' currently serialises the
store and the load, these barriers ensure the reader sees the fully
initialised 'hyp_vcpu' object even if there were a lockless path or
if the lock's own ordering guarantees were insufficient for nested
object initialization.
🎖@cveNotify
🚨 CVE-2026-46148
In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: control built-in cs manually
The coreQSPI IP supports only a single chip select, which is
automagically operated by the hardware - set low when the transmit
buffer first gets written to and set high when the number of bytes
written to the TOTALBYTES field of the FRAMES register have been sent on
the bus. Additional devices must use GPIOs for their chip selects.
It was reported to me that if there are two devices attached to this
QSPI controller that the in-built chip select is set low while linux
tries to access the device attached to the GPIO.
This went undetected as the boards that connected multiple devices to
the SPI controller all exclusively used GPIOs for chip selects, not
relying on the built-in chip select at all. It turns out that this was
because the built-in chip select, when controlled automagically, is set
low when active and high when inactive, thereby ruling out its use for
active-high devices or devices that need to transmit with the chip
select disabled.
Modify the driver so that it controls chip select directly, retaining
the behaviour for mem_ops of setting the chip select active for the
entire duration of the transfer in the exec_op callback. For regular
transfers, implement the set_cs callback for the core to use.
As part of this, the existing setup callback, mchp_coreqspi_setup_op(),
is removed. Modifying the CLKIDLE field is not safe to do during
operation when there are multiple devices, so this code is removed
entirely. Setting the MASTER and ENABLE fields is something that can be
done once at probe, it doesn't need to be re-run for each device.
Instead the new setup callback sets the built-in chip select to its
inactive state for active-low devices, as the reset value of the chip
select in software controlled mode is low.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: control built-in cs manually
The coreQSPI IP supports only a single chip select, which is
automagically operated by the hardware - set low when the transmit
buffer first gets written to and set high when the number of bytes
written to the TOTALBYTES field of the FRAMES register have been sent on
the bus. Additional devices must use GPIOs for their chip selects.
It was reported to me that if there are two devices attached to this
QSPI controller that the in-built chip select is set low while linux
tries to access the device attached to the GPIO.
This went undetected as the boards that connected multiple devices to
the SPI controller all exclusively used GPIOs for chip selects, not
relying on the built-in chip select at all. It turns out that this was
because the built-in chip select, when controlled automagically, is set
low when active and high when inactive, thereby ruling out its use for
active-high devices or devices that need to transmit with the chip
select disabled.
Modify the driver so that it controls chip select directly, retaining
the behaviour for mem_ops of setting the chip select active for the
entire duration of the transfer in the exec_op callback. For regular
transfers, implement the set_cs callback for the core to use.
As part of this, the existing setup callback, mchp_coreqspi_setup_op(),
is removed. Modifying the CLKIDLE field is not safe to do during
operation when there are multiple devices, so this code is removed
entirely. Setting the MASTER and ENABLE fields is something that can be
done once at probe, it doesn't need to be re-run for each device.
Instead the new setup callback sets the built-in chip select to its
inactive state for active-low devices, as the reset value of the chip
select in software controlled mode is low.
🎖@cveNotify
🚨 CVE-2026-46149
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()
will be triggered.
Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length
check to avoid buffer overflow") added the same bound to the
target_lu_gp_members_show() but the tg_pt_gp variant was missed so
resolve that here.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()
will be triggered.
Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length
check to avoid buffer overflow") added the same bound to the
target_lu_gp_members_show() but the tg_pt_gp variant was missed so
resolve that here.
🎖@cveNotify
🚨 CVE-2026-4874
A flaw was found in Keycloak. An authenticated attacker can perform Server-Side Request Forgery (SSRF) by manipulating the `client_session_host` parameter during refresh token requests. This occurs when a Keycloak client is configured to use the `backchannel.logout.url` with the `application.session.host` placeholder. Successful exploitation allows the attacker to make HTTP requests from the Keycloak server’s network context, potentially probing internal networks or internal APIs, leading to information disclosure.
🎖@cveNotify
A flaw was found in Keycloak. An authenticated attacker can perform Server-Side Request Forgery (SSRF) by manipulating the `client_session_host` parameter during refresh token requests. This occurs when a Keycloak client is configured to use the `backchannel.logout.url` with the `application.session.host` placeholder. Successful exploitation allows the attacker to make HTTP requests from the Keycloak server’s network context, potentially probing internal networks or internal APIs, leading to information disclosure.
🎖@cveNotify
🚨 CVE-2026-28367
A flaw was found in Undertow. A remote attacker can exploit this vulnerability by sending `\r\r\r` as a header block terminator. This can be used for request smuggling with certain proxy servers, such as older versions of Apache Traffic Server and Google Cloud Classic Application Load Balancer, potentially leading to unauthorized access or manipulation of web requests.
🎖@cveNotify
A flaw was found in Undertow. A remote attacker can exploit this vulnerability by sending `\r\r\r` as a header block terminator. This can be used for request smuggling with certain proxy servers, such as older versions of Apache Traffic Server and Google Cloud Classic Application Load Balancer, potentially leading to unauthorized access or manipulation of web requests.
🎖@cveNotify
🚨 CVE-2026-28368
A flaw was found in Undertow. This vulnerability allows a remote attacker to construct specially crafted requests where header names are parsed differently by Undertow compared to upstream proxies. This discrepancy in header interpretation can be exploited to launch request smuggling attacks, potentially bypassing security controls and accessing unauthorized resources.
🎖@cveNotify
A flaw was found in Undertow. This vulnerability allows a remote attacker to construct specially crafted requests where header names are parsed differently by Undertow compared to upstream proxies. This discrepancy in header interpretation can be exploited to launch request smuggling attacks, potentially bypassing security controls and accessing unauthorized resources.
🎖@cveNotify
🚨 CVE-2026-28369
A flaw was found in Undertow. When Undertow receives an HTTP request where the first header line starts with one or more spaces, it incorrectly processes the request by stripping these leading spaces. This behavior, which violates HTTP standards, can be exploited by a remote attacker to perform request smuggling. Request smuggling allows an attacker to bypass security mechanisms, access restricted information, or manipulate web caches, potentially leading to unauthorized actions or data exposure.
🎖@cveNotify
A flaw was found in Undertow. When Undertow receives an HTTP request where the first header line starts with one or more spaces, it incorrectly processes the request by stripping these leading spaces. This behavior, which violates HTTP standards, can be exploited by a remote attacker to perform request smuggling. Request smuggling allows an attacker to bypass security mechanisms, access restricted information, or manipulate web caches, potentially leading to unauthorized actions or data exposure.
🎖@cveNotify
🚨 CVE-2026-37977
A flaw was found in Keycloak. A remote attacker can exploit a Cross-Origin Resource Sharing (CORS) header injection vulnerability in Keycloak's User-Managed Access (UMA) token endpoint. This flaw occurs because the `azp` claim from a client-supplied JSON Web Token (JWT) is used to set the `Access-Control-Allow-Origin` header before the JWT signature is validated. When a specially crafted JWT with an attacker-controlled `azp` value is processed, this value is reflected as the CORS origin, even if the grant is later rejected. This can lead to the exposure of low-sensitivity information from authorization server error responses, weakening origin isolation, but only when a target client is misconfigured with `webOrigins: ["*"]`.
🎖@cveNotify
A flaw was found in Keycloak. A remote attacker can exploit a Cross-Origin Resource Sharing (CORS) header injection vulnerability in Keycloak's User-Managed Access (UMA) token endpoint. This flaw occurs because the `azp` claim from a client-supplied JSON Web Token (JWT) is used to set the `Access-Control-Allow-Origin` header before the JWT signature is validated. When a specially crafted JWT with an attacker-controlled `azp` value is processed, this value is reflected as the CORS origin, even if the grant is later rejected. This can lead to the exposure of low-sensitivity information from authorization server error responses, weakening origin isolation, but only when a target client is misconfigured with `webOrigins: ["*"]`.
🎖@cveNotify
🚨 CVE-2026-7500
When Keycloak is started with `--features-disabled=account,account-api`, the Account REST API is only partially disabled. Five endpoints under the versioned path `/account/v1alpha1` remain fully functional — including both read and write operations — because they lack the `checkAccountApiEnabled()` gate that correctly blocks four other endpoints in the same REST service class. The user needs to have permissions to use the API.
🎖@cveNotify
When Keycloak is started with `--features-disabled=account,account-api`, the Account REST API is only partially disabled. Five endpoints under the versioned path `/account/v1alpha1` remain fully functional — including both read and write operations — because they lack the `checkAccountApiEnabled()` gate that correctly blocks four other endpoints in the same REST service class. The user needs to have permissions to use the API.
🎖@cveNotify
🚨 CVE-2026-8830
A flaw was found in Keycloak. An authenticated user can bypass configured WebAuthn policies during credential registration by manipulating client-side JavaScript. This occurs because the server-side processAction() fails to validate that the newly created credential's parameters, such as public key algorithms, match the realm's configured WebAuthn policies. This could lead to the creation of credentials that do not adhere to administrative security requirements, potentially weakening the overall security posture of the system by allowing non-compliant authentication methods.
🎖@cveNotify
A flaw was found in Keycloak. An authenticated user can bypass configured WebAuthn policies during credential registration by manipulating client-side JavaScript. This occurs because the server-side processAction() fails to validate that the newly created credential's parameters, such as public key algorithms, match the realm's configured WebAuthn policies. This could lead to the creation of credentials that do not adhere to administrative security requirements, potentially weakening the overall security posture of the system by allowing non-compliant authentication methods.
🎖@cveNotify
🚨 CVE-2026-8922
A flaw was found in Keycloak. When both realm-level and client-level `notBefore` revocation policies are configured, Keycloak's OpenID Connect (OIDC) Introspection feature fails to properly honor the realm-level policy. This allows tokens that should have been revoked to remain active, potentially leading to unauthorized access or continued session validity. This could impact the security of systems utilizing Keycloak for identity and access management.
🎖@cveNotify
A flaw was found in Keycloak. When both realm-level and client-level `notBefore` revocation policies are configured, Keycloak's OpenID Connect (OIDC) Introspection feature fails to properly honor the realm-level policy. This allows tokens that should have been revoked to remain active, potentially leading to unauthorized access or continued session validity. This could impact the security of systems utilizing Keycloak for identity and access management.
🎖@cveNotify
🚨 CVE-2026-9087
A flaw was found in Keycloak. The cross-session verification proof is keyed only by (local userId,
idpAlias) and is not bound to the upstream identity that was actually verified, so a second upstream account on the same IdP can consume it and get linked to the victim's local account.
🎖@cveNotify
A flaw was found in Keycloak. The cross-session verification proof is keyed only by (local userId,
idpAlias) and is not bound to the upstream identity that was actually verified, so a second upstream account on the same IdP can consume it and get linked to the victim's local account.
🎖@cveNotify
🚨 CVE-2026-9704
A flaw was found in Keycloak. An authenticated user with low privileges can exploit this vulnerability by sending an oversized subject_token JSON Web Token (JWT) to the TokenEndpoint. When the token exceeds a 4000-character limit, it is silently dropped, causing the system to fall back to client credentials. This allows the user to gain the permissions of the client's service account, leading to privilege escalation.
🎖@cveNotify
A flaw was found in Keycloak. An authenticated user with low privileges can exploit this vulnerability by sending an oversized subject_token JSON Web Token (JWT) to the TokenEndpoint. When the token exceeds a 4000-character limit, it is silently dropped, causing the system to fall back to client credentials. This allows the user to gain the permissions of the client's service account, leading to privilege escalation.
🎖@cveNotify
🚨 CVE-2026-9791
A flaw was found in Keycloak. An authenticated user with existing organization membership can exploit this flaw by accessing user-facing APIs, such as the account API or by requesting an OpenID Connect (OIDC) token with the 'organization' scope. This allows organization metadata to be disclosed in tokens, even after an administrator has explicitly disabled the Organizations feature, potentially leading to incorrect authorization decisions by resource servers.
🎖@cveNotify
A flaw was found in Keycloak. An authenticated user with existing organization membership can exploit this flaw by accessing user-facing APIs, such as the account API or by requesting an OpenID Connect (OIDC) token with the 'organization' scope. This allows organization metadata to be disclosed in tokens, even after an administrator has explicitly disabled the Organizations feature, potentially leading to incorrect authorization decisions by resource servers.
🎖@cveNotify