🚨 CVE-2026-10783
A security flaw has been discovered in gradio-app gradio 6.14.0. This affects the function save_audio_to_cache of the component Audio Cache Key Handler. Performing a manipulation results in use of weak hash. The attack must be initiated from a local position. The attack is considered to have high complexity. It is indicated that the exploitability is difficult. The exploit has been released to the public and may be used for attacks. The patch is named 13394. To fix this issue, it is recommended to deploy a patch.

🎖@cveNotify

🚨 CVE-2026-10804
A vulnerability has been found in Streamlit up to 1.53.0. Impacted is an unknown function in the library lib/streamlit/runtime/caching/hashing.py of the component Palette Handler. Such manipulation leads to use of weak hash. Local access is required to approach this attack. The attack requires a high level of complexity. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The pull request to fix this issue awaits acceptance.

🎖@cveNotify

🚨 CVE-2026-47648
Untrusted search path in Windows Storage allows an authorized attacker to elevate privileges locally.

🎖@cveNotify

🚨 CVE-2026-47652
Out-of-bounds read in Windows Hyper-V allows an unauthorized attacker to execute code locally.

🎖@cveNotify

🚨 CVE-2026-47656
Protection mechanism failure in Windows Boot Manager allows an authorized attacker to bypass a security feature locally.

🎖@cveNotify

🚨 CVE-2026-46219
In the Linux kernel, the following vulnerability has been resolved:

spi: mpc52xx: fix use-after-free on unbind

The state machine work is scheduled by the interrupt handler and
therefore needs to be cancelled after disabling interrupts to avoid a
potential use-after-free.

🎖@cveNotify

🚨 CVE-2026-46220
In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission

sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.

Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.

The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.

(cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e)

🎖@cveNotify

🚨 CVE-2026-46221
In the Linux kernel, the following vulnerability has been resolved:

EDAC/versalnet: Fix device name memory leak

The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.

Use a stack-local char array instead of using kzalloc() for name.

🎖@cveNotify

🚨 CVE-2026-46222
In the Linux kernel, the following vulnerability has been resolved:

media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads

The pads missed checks for connected devices which may a null dereference
when the stream is enabled.

Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
pc : rkcif_interface_enable_streams+0x48/0xf0
lr : rkcif_interface_enable_streams+0x44/0xf0
Call trace:
rkcif_interface_enable_streams+0x48/0xf0
v4l2_subdev_enable_streams+0x26c/0x3f0
rkcif_stream_start_streaming+0x140/0x278
vb2_start_streaming+0x74/0x188
vb2_core_streamon+0xe0/0x1d8
vb2_ioctl_streamon+0x60/0xa8
v4l_streamon+0x2c/0x40
__video_do_ioctl+0x34c/0x400
video_usercopy+0x2d0/0x800
video_ioctl2+0x20/0x60
v4l2_ioctl+0x48/0x78

🎖@cveNotify

🚨 CVE-2026-46224
In the Linux kernel, the following vulnerability has been resolved:

drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure

When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.

xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.

Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.

v2: Add comments to explain the free logic.

(cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9)

🎖@cveNotify

🚨 CVE-2026-46225
In the Linux kernel, the following vulnerability has been resolved:

spi: rspi: fix controller deregistration

Make sure to deregister the controller before releasing underlying
resources like DMA during driver unbind.

🎖@cveNotify

🚨 CVE-2026-5713
The "profiling.sampling" module (Python 3.15+) and "asyncio introspection capabilities" (3.14+, "python -m asyncio ps" and "python -m asyncio pstree") features could be used to read and write addresses in a privileged process if that process connected to a malicious or "infected" Python process via the remote debugging feature. This vulnerability requires persistently and repeatedly connecting to the process to be exploited, even after the connecting process crashes with high likelihood due to ASLR.

🎖@cveNotify

🚨 CVE-2026-7210
`xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch.

🎖@cveNotify

🚨 CVE-2026-8328
The ftpcp() function in Lib/ftplib.py was not updated when
CVE-2021-4189 was fixed. While makepasv() was patched to replace
server-supplied PASV host addresses with the actual peer address
(getpeername()[0]), ftpcp() still calls parse227() directly and passes
the raw attacker-controllable IP address and port to target.sendport(). This patch is related to CVE-2021-4189.

🎖@cveNotify

🚨 CVE-2026-46193
In the Linux kernel, the following vulnerability has been resolved:

xfrm: ah: account for ESN high bits in async callbacks

AH allocates its temporary auth/ICV layout differently when ESN is enabled:
the async ahash setup appends a 4-byte seqhi slot before the ICV or
auth_data area, but the async completion callbacks still reconstruct the
temporary layout as if seqhi were absent.

With an async AH implementation selected, that makes AH copy or compare
the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH
with ESN and forced async hmac(sha1), ping fails with 100% packet loss,
and the callback logs show the pre-fix drift:

ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24
ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36

Reconstruct the callback-side layout the same way the setup path built it
by skipping the ESN seqhi slot before locating the saved auth_data or ICV.
Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV
computation, so the async callbacks must account for the seqhi slot.

Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows
the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24
expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o
build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the
change has not been tested against a real async hardware AH engine.

🎖@cveNotify

🚨 CVE-2026-46194
In the Linux kernel, the following vulnerability has been resolved:

f2fs: fix node_cnt race between extent node destroy and writeback

f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing
extent nodes. When called from f2fs_drop_inode() with I_SYNC set,
concurrent kworker writeback can insert new extent nodes into the same
extent tree, racing with the destroy and triggering f2fs_bug_on() in
__destroy_extent_node(). The scenario is as follows:

drop inode writeback
- iput
- f2fs_drop_inode // I_SYNC set
- f2fs_destroy_extent_node
- __destroy_extent_node
- while (node_cnt) {
write_lock(&et->lock)
__free_extent_tree
write_unlock(&et->lock)
- __writeback_single_inode
- f2fs_outplace_write_data
- f2fs_update_read_extent_cache
- __update_extent_tree_range
// FI_NO_EXTENT not set,
// insert new extent node
} // node_cnt == 0, exit while
- f2fs_bug_on(node_cnt) // node_cnt > 0

Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for
EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected.

This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(),
consistent with other callers (__update_extent_tree_range and
__drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and
EX_BLOCK_AGE tree.

🎖@cveNotify

🚨 CVE-2026-46195
In the Linux kernel, the following vulnerability has been resolved:

smb: client: validate dacloffset before building DACL pointers

parse_sec_desc(), build_sec_desc(), and the chown path in
id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd
before proving a DACL header fits inside the returned security
descriptor.

On 32-bit builds a malicious server can return dacloffset near
U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip
past the later pointer-based bounds checks. build_sec_desc() and
id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped
pointer in the chmod/chown rewrite paths.

Validate dacloffset numerically before building any DACL pointer and
reuse the same helper at the three DACL entry points.

🎖@cveNotify

🚨 CVE-2026-46196
In the Linux kernel, the following vulnerability has been resolved:

tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()

When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.

For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.

Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration.

🎖@cveNotify

🚨 CVE-2026-46206
In the Linux kernel, the following vulnerability has been resolved:

batman-adv: reject new tp_meter sessions during teardown

Prevent tp_meter from starting new sender or receiver sessions after
mesh_state has left BATADV_MESH_ACTIVE.

🎖@cveNotify

🚨 CVE-2026-46207
In the Linux kernel, the following vulnerability has been resolved:

vsock/virtio: fix empty payload in tap skb for non-linear buffers

For non-linear skbs, virtio_transport_build_skb() goes through
virtio_transport_copy_nonlinear_skb() to copy the original payload
in the new skb to be delivered to the vsockmon tap device.
This manually initializes an iov_iter but does not set iov_iter.count.
Since the iov_iter is zero-initialized, the copy length is zero and no
payload is actually copied to the monitor interface, leaving data
un-initialized.

Fix this by removing the linear vs non-linear split and using
skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as
vhost-vsock already does. This handles both linear and non-linear skbs,
properly initializes the iov_iter, and removes the now unused
virtio_transport_copy_nonlinear_skb().

While touching this code, let's also check the return value of
skb_copy_datagram_iter(), even though it's unlikely to fail.

🎖@cveNotify

🚨 CVE-2026-46208
In the Linux kernel, the following vulnerability has been resolved:

batman-adv: stop tp_meter sessions during mesh teardown

TP meter sessions remain linked on bat_priv->tp_list after the netlink
request has already finished. When the mesh interface is removed,
batadv_mesh_free() currently tears down the mesh without first draining
these sessions.

A running sender thread or a late incoming tp_meter packet can then keep
processing against a mesh instance which is already shutting down.
Synchronize tp_meter with the mesh lifetime by stopping all active
sessions from batadv_mesh_free() and waiting for sender threads to exit
before teardown continues.

🎖@cveNotify