🚨 CVE-2026-23306
In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled.
🎖@cveNotify
🚨 CVE-2026-23307
In the Linux kernel, the following vulnerability has been resolved:
can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message.
🎖@cveNotify
🚨 CVE-2026-23300
In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop.
🎖@cveNotify
🚨 CVE-2026-23301
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add allocation failure check for Entity name
Currently find_sdca_entity_iot() can allocate a string for the
Entity name but it doesn't check if that allocation succeeded.
Add the missing NULL check after the allocation.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add allocation failure check for Entity name
Currently find_sdca_entity_iot() can allocate a string for the
Entity name but it doesn't check if that allocation succeeded.
Add the missing NULL check after the allocation.
🎖@cveNotify
🚨 CVE-2026-23302
In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX.
🎖@cveNotify
🚨 CVE-2026-23303
In the Linux kernel, the following vulnerability has been resolved:
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials.
🎖@cveNotify
🚨 CVE-2026-39833
The in-memory keyring returned by NewKeyring() silently accepted keys with the ConfirmBeforeUse constraint but never enforced it. The key would sign without any confirmation prompt, with no indication to the caller that the constraint was not in effect. NewKeyring() now returns an error when unsupported constraints are requested.
🎖@cveNotify
The in-memory keyring returned by NewKeyring() silently accepted keys with the ConfirmBeforeUse constraint but never enforced it. The key would sign without any confirmation prompt, with no indication to the caller that the constraint was not in effect. NewKeyring() now returns an error when unsupported constraints are requested.
🎖@cveNotify
🚨 CVE-2026-39834
When writing data larger than 4GB in a single Write call on an SSH channel, an integer overflow in the internal payload size calculation caused the write loop to spin indefinitely, sending empty packets without making progress. The size comparison now uses int64 to prevent truncation.
🎖@cveNotify
When writing data larger than 4GB in a single Write call on an SSH channel, an integer overflow in the internal payload size calculation caused the write loop to spin indefinitely, sending empty packets without making progress. The size comparison now uses int64 to prevent truncation.
🎖@cveNotify
🚨 CVE-2026-47104
libusb before version 1.0.30 contains a one-byte out-of-bounds read vulnerability in parse_iad_array() in descriptor.c that allows attackers to trigger a denial of service by supplying a malformed USB descriptor whose bLength equals size minus one, causing the bounds check to use the original buffer size instead of the remaining size. Attackers in virtualized environments with USB passthrough can supply crafted descriptors through libusb_get_active_interface_association_descriptors or libusb_get_interface_association_descriptors to read one byte past the end of the malloc allocation, resulting in a denial of service.
🎖@cveNotify
libusb before version 1.0.30 contains a one-byte out-of-bounds read vulnerability in parse_iad_array() in descriptor.c that allows attackers to trigger a denial of service by supplying a malformed USB descriptor whose bLength equals size minus one, causing the bounds check to use the original buffer size instead of the remaining size. Attackers in virtualized environments with USB passthrough can supply crafted descriptors through libusb_get_active_interface_association_descriptors or libusb_get_interface_association_descriptors to read one byte past the end of the malloc allocation, resulting in a denial of service.
🎖@cveNotify
GitHub
tests/fuzz: Add descriptor parser fuzzer with regression seeds · libusb/libusb@578ab76
The existing fuzz_bos_descriptor.c covers only the BOS device-capability
sub-parsers, which take a libusb_bos_dev_capability_descriptor pointer
that the test can synthesize directly. The configurat...
sub-parsers, which take a libusb_bos_dev_capability_descriptor pointer
that the test can synthesize directly. The configurat...
🚨 CVE-2026-5515
IBM App Connect Enterprise 13.0.1.0 through 13.0.7.0 stores potentially sensitive information in log files that could be read by a local user.
🎖@cveNotify
IBM App Connect Enterprise 13.0.1.0 through 13.0.7.0 stores potentially sensitive information in log files that could be read by a local user.
🎖@cveNotify
Ibm
Security Bulletin: IBM App Connect Enterprise is vulnerable to a confidential disclosure (CVE-2026-5515)
Users of WS-Security with java 17 in IBM App Connect Enterprise are vulnerable to a confidential disclosure.
🚨 CVE-2026-6051
IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when executing a specially crafted query with a small statement heap.
🎖@cveNotify
IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when executing a specially crafted query with a small statement heap.
🎖@cveNotify
Ibm
Security Bulletin: IBM® Db2® is vulnerable to a denial of service when executing a specially crafted query with a small statement…
IBM® Db2® is vulnerable to a denial of service when executing a specially crafted query with a small statement heap.
🚨 CVE-2026-6052
IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to running out of memory when executing certain queries with MDC tables.
🎖@cveNotify
IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to running out of memory when executing certain queries with MDC tables.
🎖@cveNotify
Ibm
Security Bulletin: IBM® Db2® is vulnerable to running out of memory when executing certain queries with MDC tables (CVE-2026-6052)
IBM® Db2® is vulnerable to running out of memory when executing certain queries with MDC tables.
🚨 CVE-2026-6053
IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when a specially crafted query is run with range partitioned tables.
🎖@cveNotify
IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when a specially crafted query is run with range partitioned tables.
🎖@cveNotify
Ibm
Security Bulletin: IBM® Db2® is vulnerable to a denial of service when a specially crafted query is run with range partitioned…
is vulnerable to a denial of service when a specially crafted query is run with range partitioned tables.
🚨 CVE-2026-6936
IBM i 7.6, 7.5, 7.4, and 7.3 s vulnerable to a denial-of-service attack due to uncontrolled recursion in the Integrated Language Environment (ILE) compiler. An authenticated attacker could exploit this vulnerability by compiling specially crafted source code containing a specific combination of statements.
🎖@cveNotify
IBM i 7.6, 7.5, 7.4, and 7.3 s vulnerable to a denial-of-service attack due to uncontrolled recursion in the Integrated Language Environment (ILE) compiler. An authenticated attacker could exploit this vulnerability by compiling specially crafted source code containing a specific combination of statements.
🎖@cveNotify
Ibm
Security Bulletin: IBM i is Affected by a Denial of Service Vulnerability [CVE-2026-6936]
IBM i is vulnerable to denial of service due to uncontrolled recurision in the Integrated Language Environment (ILE) compiler as described in the vulnerability details section.
🚨 CVE-2026-6938
IBM Db2 12.1.0 through 12.1.4 is vulnerable to authorization bypass when uploading to a remote object storage path with a special query.
🎖@cveNotify
IBM Db2 12.1.0 through 12.1.4 is vulnerable to authorization bypass when uploading to a remote object storage path with a special query.
🎖@cveNotify
Ibm
Security Bulletin: IBM® Db2® is vulnerable to authorization bypass when uploading to a remote object storage path with a special…
IBM® Db2® is vulnerable to authorization bypass when uploading to a remote object storage path with a special query
🚨 CVE-2024-54508
The issue was addressed with improved memory handling. This issue is fixed in Safari 18.2, iOS 18.2 and iPadOS 18.2, iPadOS 17.7.6, macOS Sequoia 15.2, tvOS 18.2, visionOS 2.2, watchOS 11.2. Processing maliciously crafted web content may lead to an unexpected process crash.
🎖@cveNotify
The issue was addressed with improved memory handling. This issue is fixed in Safari 18.2, iOS 18.2 and iPadOS 18.2, iPadOS 17.7.6, macOS Sequoia 15.2, tvOS 18.2, visionOS 2.2, watchOS 11.2. Processing maliciously crafted web content may lead to an unexpected process crash.
🎖@cveNotify
Apple Support
About the security content of iOS18.2 and iPadOS18.2 - Apple Support
This document describes the security content of iOS 18.2 and iPadOS 18.2.
🚨 CVE-2026-33999
A flaw was found in the X.Org X server. This integer underflow vulnerability, specifically in the XKB compatibility map handling, allows an attacker with local or remote X11 server access to trigger a buffer read overrun. This can lead to memory-safety violations and potentially a denial of service (DoS) or other severe impacts.
🎖@cveNotify
A flaw was found in the X.Org X server. This integer underflow vulnerability, specifically in the XKB compatibility map handling, allows an attacker with local or remote X11 server access to trigger a buffer read overrun. This can lead to memory-safety violations and potentially a denial of service (DoS) or other severe impacts.
🎖@cveNotify
🚨 CVE-2026-34001
A flaw was found in the X.Org X server. This use-after-free vulnerability occurs in the XSYNC fence triggering logic, specifically within the miSyncTriggerFence() function. An attacker with access to the X11 server can exploit this without user interaction, leading to a server crash and potentially enabling memory corruption. This could result in a denial of service or further compromise of the system.
🎖@cveNotify
A flaw was found in the X.Org X server. This use-after-free vulnerability occurs in the XSYNC fence triggering logic, specifically within the miSyncTriggerFence() function. An attacker with access to the X11 server can exploit this without user interaction, leading to a server crash and potentially enabling memory corruption. This could result in a denial of service or further compromise of the system.
🎖@cveNotify
🚨 CVE-2026-34003
A flaw was found in the X.Org X server's XKB key types request validation. A local attacker could send a specially crafted request to the X server, leading to an out-of-bounds memory access vulnerability. This could result in the disclosure of sensitive information or cause the server to crash, leading to a Denial of Service (DoS). In certain configurations, higher impact outcomes may be possible.
🎖@cveNotify
A flaw was found in the X.Org X server's XKB key types request validation. A local attacker could send a specially crafted request to the X server, leading to an out-of-bounds memory access vulnerability. This could result in the disclosure of sensitive information or cause the server to crash, leading to a Denial of Service (DoS). In certain configurations, higher impact outcomes may be possible.
🎖@cveNotify
🚨 CVE-2021-47924
Ultimate Product Catalogue 5.8.2 contains a stored cross-site scripting vulnerability that allows authenticated attackers to inject malicious scripts through the price parameter. Attackers can submit POST requests to post.php with HTML/JavaScript payloads in the price field to execute arbitrary code when the product is viewed.
🎖@cveNotify
Ultimate Product Catalogue 5.8.2 contains a stored cross-site scripting vulnerability that allows authenticated attackers to inject malicious scripts through the price parameter. Attackers can submit POST requests to post.php with HTML/JavaScript payloads in the price field to execute arbitrary code when the product is viewed.
🎖@cveNotify
WordPress.org
Ultimate Product Catalog
Add a product catalog to your site with blocks or shortcodes. Works with WooCommerce or standalone. Flexible and customizable, works with any theme.