🚨 CVE-2026-2611
In MLflow version 3.9.0, the MLflow Assistant feature introduced improper origin validation in its /ajax-api endpoints. This vulnerability allows a remote attacker to exploit cross-origin requests from a malicious webpage to interact with the MLflow Assistant running on a victim's local machine. By bypassing the loopback-only restriction, the attacker can modify the Assistant's configuration to enable full access, which in turn allows the execution of arbitrary commands via the Claude Code sub-agent. This issue is resolved in version 3.10.0.

🎖@cveNotify

🚨 CVE-2026-33633
Kitty is a cross-platform GPU based terminal. Versions 0.46.2 and below contain a heap buffer overflow in load_image_data() that allows any process which can write to the terminal's stdin to crash kitty immediately. The vulnerability is triggered by a single APC graphics protocol command with a PNG format declaration (f=100) whose payload exceeds twice the initial buffer capacity. The overflow is attacker-controlled in both length and content, causing DoS and potentially escalation to RCE itself. This issue has been fixed in version 0.47.0.

🎖@cveNotify

🚨 CVE-2026-33642
Kitty is a cross-platform GPU based terminal. In versions 0.46.2 and below, the handle_compose_command() function in kitty/graphics.c performs bounds validation on composition offsets using unsigned 32-bit arithmetic that is subject to integer wrapping, potentially leading to Heap Buffer Over-Read/Write. An attacker who can write escape sequences to a kitty terminal (e.g., via a malicious file, SSH login banner, or piped content) can supply crafted x_offset/y_offset values that pass the bounds check after wrapping but cause massive out-of-bounds heap memory access in compose_rectangles(). No user interaction is required. No non-default configuration is required. The attacker only needs the ability to produce output in a kitty terminal window. This issue has been fixed in version 0.47.0.

🎖@cveNotify

🚨 CVE-2026-24188
NVIDIA TensorRT contains a vulnerability where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to data tampering.

🎖@cveNotify

🚨 CVE-2026-22678
Webmin before 2.641 contains a stored cross-site scripting vulnerability in the email template description field of the System and Server Status module that allows low-privileged authenticated attackers to execute arbitrary commands by injecting unsanitized input stored in save_tmpl.cgi and rendered unescaped in list_tmpls.cgi.

🎖@cveNotify

🚨 CVE-2026-33117
Improper authentication in Azure SDK allows an unauthorized attacker to bypass a security feature over a network.

🎖@cveNotify

🚨 CVE-2026-34336
Buffer over-read in Windows DWM Core Library allows an authorized attacker to disclose information locally.

🎖@cveNotify

🚨 CVE-2026-45585
Microsoft is aware of a security feature bypass vulnerability in Windows publicly referred to as "YellowKey". The proof of concept for this vulnerability has been made public violating coordinated vulnerability best practices.
We are issuing this CVE to provide mitigation guidance that can be implemented to protect against this vulnerability until the security update is made available.

🎖@cveNotify

🚨 CVE-2026-45760
(Externally Controlled Reference to a Resource in Another Sphere), (Authorization Bypass Through User-Controlled Key) vulnerability in Apache Camel K. Authorized users in a Kubernetes namespace can create a Build resource, controlling the Pod generation in a namespace of their choice, including the operator namespace.

This issue affects Apache Camel K: from 2.0.0 before 2.8.1, from 2.9.0 before 2.9.2, from 2.10.0 before 2.10.1.

Users are recommended to upgrade to version 2.10.1 (or 2.8.1 or 2.9.2), which fixes the issue.

🎖@cveNotify

🚨 CVE-2025-68251
In the Linux kernel, the following vulnerability has been resolved:

erofs: avoid infinite loops due to corrupted subpage compact indexes

Robert reported an infinite loop observed by two crafted images.

The root cause is that `clusterofs` can be larger than `lclustersize`
for !NONHEAD `lclusters` in corrupted subpage compact indexes, e.g.:

blocksize = lclustersize = 512 lcn = 6 clusterofs = 515

Move the corresponding check for full compress indexes to
`z_erofs_load_lcluster_from_disk()` to also cover subpage compact
compress indexes.

It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`
check, since it should be placed right after
`z_erofs_load_{compact,full}_lcluster()`.

🎖@cveNotify

🚨 CVE-2026-23272
In the Linux kernel, the following vulnerability has been resolved:

netfilter: nf_tables: unconditionally bump set->nelems before insertion

In case that the set is full, a new element gets published then removed
without waiting for the RCU grace period, while RCU reader can be
walking over it already.

To address this issue, add the element transaction even if set is full,
but toggle the set_full flag to report -ENFILE so the abort path safely
unwinds the set to its previous state.

As for element updates, decrement set->nelems to restore it.

A simpler fix is to call synchronize_rcu() in the error path.
However, with a large batch adding elements to already maxed-out set,
this could cause noticeable slowdown of such batches.

🎖@cveNotify

🚨 CVE-2025-13118
A vulnerability was detected in macrozheng mall-swarm and mall up to 1.0.3. Affected by this issue is the function paySuccess of the file /order/paySuccess. The manipulation of the argument orderID results in improper authorization. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-5194
Missing hash/digest size and OID checks allow digests smaller than allowed when verifying ECDSA certificates, or smaller than is appropriate for the relevant key type, to be accepted by signature verification functions. This could lead to reduced security of ECDSA certificate-based authentication if the public CA key used is also known. This affects ECDSA/ECC verification when EdDSA or ML-DSA is also enabled.

🎖@cveNotify

🚨 CVE-2026-42009
A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service.

🎖@cveNotify

🚨 CVE-2026-48172
LiteSpeed User-End cPanel Plugin before 2.4.5 allows privilege escalation (possibly to root), as exploited in the wild in May 2026. Detection is best done via a command line of grep -rE "cpanel_jsonapi_func=redisAble" /var/cpanel/logs /usr/local/cpanel/logs/ 2>/dev/null in Bash. If you get no output, you have not been hit with exploitation of the vulnerability. If there is output, we recommend you examine the IP addresses in the list, determine if they are valid IP addresses, and if not, block them. To determine damage done, examine the system logs for use by the detected IP addresses. The issue is related to mishandling of Redis enable/disable features. The recommended minimum version is 2.4.7.

🎖@cveNotify

🚨 CVE-2026-4115
A vulnerability was detected in PuTTY 0.83. Affected is the function eddsa_verify of the file crypto/ecc-ssh.c of the component Ed25519 Signature Handler. The manipulation results in improper verification of cryptographic signature. The attack may be performed from remote. The attack requires a high level of complexity. The exploitability is told to be difficult. The exploit is now public and may be used. The real existence of this vulnerability is still doubted at the moment. The patch is identified as af996b5ec27ab79bae3882071b9d6acf16044549. It is advisable to implement a patch to correct this issue. The vendor was contacted early, responded in a very professional manner and quickly released a patch for the affected product. However, at the moment there is no proof that this flaw might have any real-world impact.

🎖@cveNotify

🚨 CVE-2012-10024
XBMC version 11, including builds up to the 2012-11-04 nightly release, contains a path traversal vulnerability in its embedded HTTP server. When accessed via HTTP Basic Authentication, the server fails to properly sanitize URI input, allowing authenticated users to request files outside the intended document root. An attacker can exploit this flaw to read arbitrary files from the host filesystem, including sensitive configuration or credential files.

🎖@cveNotify

🚨 CVE-2012-10032
Maxthon3 versions prior to 3.3 are vulnerable to cross context scripting (XCS) via the about:history page. The browser’s trusted zone improperly handles injected script content, allowing attackers to execute arbitrary JavaScript in a privileged context. This flaw enables modification of browser configuration and execution of arbitrary code through Maxthon’s exposed DOM APIs, including maxthon.program.Program.launch() and maxthon.io.writeDataURL(). Exploitation requires user interaction, typically by visiting a malicious webpage that triggers the injection.

🎖@cveNotify

🚨 CVE-2013-10068
Foxit Reader Plugin version 2.2.1.530, bundled with Foxit Reader 5.4.4.11281, contains a stack-based buffer overflow vulnerability in the npFoxitReaderPlugin.dll module. When a PDF file is loaded from a remote host, an overly long query string in the URL can overflow a buffer, allowing remote attackers to execute arbitrary code.

🎖@cveNotify

🚨 CVE-2010-20042
Xion Audio Player versions prior to 1.0.126 are vulnerable to a Unicode-based stack buffer overflow triggered by opening a specially crafted .m3u playlist file. The file contains an overly long string that overwrites the Structured Exception Handler (SEH) chain, allowing an attacker to hijack execution flow and run arbitrary code.

🎖@cveNotify

🚨 CVE-2025-34512
Ilevia EVE X1 Server firmware versions ≤ 4.7.18.0.eden contain a reflected cross-site scripting (XSS) vulnerability in index.php that allows an unauthenticated attacker to execute arbitrary code. Ilevia has declined to service this vulnerability, and recommends that customers not expose port 8080 to the internet.

🎖@cveNotify