🚨 CVE-2026-43088
In the Linux kernel, the following vulnerability has been resolved:

net: af_key: zero aligned sockaddr tail in PF_KEY exports

PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.

Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:

- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`

Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`.

🎖@cveNotify

🚨 CVE-2026-43089
In the Linux kernel, the following vulnerability has been resolved:

xfrm_user: fix info leak in build_mapping()

struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set to zero before copying out to
userspace. Fix that up by zeroing out the whole structure before
setting individual variables.

🎖@cveNotify

🚨 CVE-2026-43417
In the Linux kernel, the following vulnerability has been resolved:

sched/mmcid: Handle vfork()/CLONE_VM correctly

Matthieu and Jiri reported stalls where a task endlessly loops in
mm_get_cid() when scheduling in.

It turned out that the logic which handles vfork()'ed tasks is broken. It
is invoked when the number of tasks associated to a process is smaller than
the number of MMCID users. It then walks the task list to find the
vfork()'ed task, but accounts all the already processed tasks as well.

If that double processing brings the number of to be handled tasks to 0,
the walk stops and the vfork()'ed task's CID is not fixed up. As a
consequence a subsequent schedule in fails to acquire a (transitional) CID
and the machine stalls.

Cure this by removing the accounting condition and make the fixup always
walk the full task list if it could not find the exact number of users in
the process' thread list.

🎖@cveNotify

🚨 CVE-2026-43418
In the Linux kernel, the following vulnerability has been resolved:

sched/mmcid: Prevent CID stalls due to concurrent forks

A newly forked task is accounted as MMCID user before the task is visible
in the process' thread list and the global task list. This creates the
following problem:

CPU1 CPU2
fork()
sched_mm_cid_fork(tnew1)
tnew1->mm.mm_cid_users++;
tnew1->mm_cid.cid = getcid()
-> preemption
fork()
sched_mm_cid_fork(tnew2)
tnew2->mm.mm_cid_users++;
// Reaches the per CPU threshold
mm_cid_fixup_tasks_to_cpus()
for_each_other(current, p)
....

As tnew1 is not visible yet, this fails to fix up the already allocated CID
of tnew1. As a consequence a subsequent schedule in might fail to acquire a
(transitional) CID and the machine stalls.

Move the invocation of sched_mm_cid_fork() after the new task becomes
visible in the thread and the task list to prevent this.

This also makes it symmetrical vs. exit() where the task is removed as CID
user before the task is removed from the thread and task lists.

🎖@cveNotify

🚨 CVE-2026-43419
In the Linux kernel, the following vulnerability has been resolved:

ceph: fix memory leaks in ceph_mdsc_build_path()

Add __putname() calls to error code paths that did not free the "path"
pointer obtained by __getname(). If ownership of this pointer is not
passed to the caller via path_info.path, the function must free it
before returning.

🎖@cveNotify

🚨 CVE-2026-9082
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Drupal Drupal core allows SQL Injection.

This issue affects Drupal core: from 8.9.0 before 10.4.10, from 10.5.0 before 10.5.10, from 10.6.0 before 10.6.9, from 11.0.0 before 11.1.10, from 11.2.0 before 11.2.12, from 11.3.0 before 11.3.10.

🎖@cveNotify

🚨 CVE-2026-24350
PluXml CMS is vulnerable to Stored XSS in file uploading functionality. An authenticated attacker can upload an SVG file containing a malicious payload, which will be executed when a victim clicks the link associated with the uploaded image.
In version 5.9.0-rc7 clicking the link associated with the uploaded image doesn't execute malicious code but directly accessing the file will still execute the embedded payload.

The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only versions 5.8.21 and 5.9.0-rc7 were tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable.

🎖@cveNotify

🚨 CVE-2026-5363
Inadequate Encryption Strength vulnerability in TP-Link Archer C7 v5 and v5.8 (uhttpd modules) allows Password Recovery Exploitation. The web interface encrypts the admin password client-side using RSA-1024 before sending it to the router during login. 
An adjacent attacker with the ability to intercept network traffic could potentially perform a brute-force or factorization attack against the 1024-bit RSA key to recover the plaintext administrator password, leading to unauthorized access and compromise of the device configuration.  This issue affects Archer C7: through Build 20220715.

🎖@cveNotify

🚨 CVE-2026-48172
LiteSpeed User-End cPanel Plugin before 2.4.5 allows privilege escalation (possibly to root), as exploited in the wild in May 2026. Detection is best done via a command line of grep -rE "cpanel_jsonapi_func=redisAble" /var/cpanel/logs /usr/local/cpanel/logs/ 2>/dev/null in Bash. If you get no output, you have not been hit with exploitation of the vulnerability. If there is output, we recommend you examine the IP addresses in the list, determine if they are valid IP addresses, and if not, block them. To determine damage done, examine the system logs for use by the detected IP addresses. The issue is related to mishandling of Redis enable/disable features. The recommended minimum version is 2.4.7.

🎖@cveNotify

🚨 CVE-2026-23261
In the Linux kernel, the following vulnerability has been resolved:

nvme-fc: release admin tagset if init fails

nvme_fabrics creates an NVMe/FC controller in following path:

nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()

nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.

Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts.

🎖@cveNotify

🚨 CVE-2026-23262
In the Linux kernel, the following vulnerability has been resolved:

gve: Fix stats report corruption on queue count change

The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.

When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.

This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC.

🎖@cveNotify

🚨 CVE-2026-23263
In the Linux kernel, the following vulnerability has been resolved:

io_uring/zcrx: fix page array leak

d9f595b9a65e ("io_uring/zcrx: fix leaking pages on sg init fail") fixed
a page leakage but didn't free the page array, release it as well.

🎖@cveNotify

🚨 CVE-2026-2611
In MLflow version 3.9.0, the MLflow Assistant feature introduced improper origin validation in its /ajax-api endpoints. This vulnerability allows a remote attacker to exploit cross-origin requests from a malicious webpage to interact with the MLflow Assistant running on a victim's local machine. By bypassing the loopback-only restriction, the attacker can modify the Assistant's configuration to enable full access, which in turn allows the execution of arbitrary commands via the Claude Code sub-agent. This issue is resolved in version 3.10.0.

🎖@cveNotify

🚨 CVE-2026-33633
Kitty is a cross-platform GPU based terminal. Versions 0.46.2 and below contain a heap buffer overflow in load_image_data() that allows any process which can write to the terminal's stdin to crash kitty immediately. The vulnerability is triggered by a single APC graphics protocol command with a PNG format declaration (f=100) whose payload exceeds twice the initial buffer capacity. The overflow is attacker-controlled in both length and content, causing DoS and potentially escalation to RCE itself. This issue has been fixed in version 0.47.0.

🎖@cveNotify

🚨 CVE-2026-33642
Kitty is a cross-platform GPU based terminal. In versions 0.46.2 and below, the handle_compose_command() function in kitty/graphics.c performs bounds validation on composition offsets using unsigned 32-bit arithmetic that is subject to integer wrapping, potentially leading to Heap Buffer Over-Read/Write. An attacker who can write escape sequences to a kitty terminal (e.g., via a malicious file, SSH login banner, or piped content) can supply crafted x_offset/y_offset values that pass the bounds check after wrapping but cause massive out-of-bounds heap memory access in compose_rectangles(). No user interaction is required. No non-default configuration is required. The attacker only needs the ability to produce output in a kitty terminal window. This issue has been fixed in version 0.47.0.

🎖@cveNotify

🚨 CVE-2026-24188
NVIDIA TensorRT contains a vulnerability where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to data tampering.

🎖@cveNotify

🚨 CVE-2026-22678
Webmin before 2.641 contains a stored cross-site scripting vulnerability in the email template description field of the System and Server Status module that allows low-privileged authenticated attackers to execute arbitrary commands by injecting unsanitized input stored in save_tmpl.cgi and rendered unescaped in list_tmpls.cgi.

🎖@cveNotify

🚨 CVE-2026-33117
Improper authentication in Azure SDK allows an unauthorized attacker to bypass a security feature over a network.

🎖@cveNotify

🚨 CVE-2026-34336
Buffer over-read in Windows DWM Core Library allows an authorized attacker to disclose information locally.

🎖@cveNotify

🚨 CVE-2026-45585
Microsoft is aware of a security feature bypass vulnerability in Windows publicly referred to as "YellowKey". The proof of concept for this vulnerability has been made public violating coordinated vulnerability best practices.
We are issuing this CVE to provide mitigation guidance that can be implemented to protect against this vulnerability until the security update is made available.

🎖@cveNotify

🚨 CVE-2026-45760
(Externally Controlled Reference to a Resource in Another Sphere), (Authorization Bypass Through User-Controlled Key) vulnerability in Apache Camel K. Authorized users in a Kubernetes namespace can create a Build resource, controlling the Pod generation in a namespace of their choice, including the operator namespace.

This issue affects Apache Camel K: from 2.0.0 before 2.8.1, from 2.9.0 before 2.9.2, from 2.10.0 before 2.10.1.

Users are recommended to upgrade to version 2.10.1 (or 2.8.1 or 2.9.2), which fixes the issue.

🎖@cveNotify