🚨 CVE-2026-37461
An out-of-bounds read in the ParseIP6Extended function (/bgp/bgp.go) of gobgp v4.3.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted BGP UPDATE message.

🎖@cveNotify

🚨 CVE-2026-42376
D-Link DIR-456U Hardware Revision A1 (End-of-Life, EOL) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /etc/init0.d/S80telnetd.sh with the username "Alphanetworks" and the static password "whdrv01_dlob_dir456U" read from /etc/config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control. The device has reached End-of-Life (EOL) and will not receive patches.

🎖@cveNotify

🚨 CVE-2026-6392
Tanium addressed an information disclosure vulnerability in Threat Response.

🎖@cveNotify

🚨 CVE-2026-32885
DDEV is an open-source tool for running local web development environments for PHP and Node.js. Versions prior to 1.25.2 have unsanitized extraction in both `Untar()` and `Unzip()` functions in `pkg/archive/archive.go`. Downloads and extracts archives from remote sources without path validation. Version 1.25.2 patches the issue.

🎖@cveNotify

🚨 CVE-2026-43192
In the Linux kernel, the following vulnerability has been resolved:

dm mpath: Add missing dm_put_device when failing to get scsi dh name

When commit fd81bc5cca8f ("scsi: device_handler: Return error pointer in
scsi_dh_attached_handler_name()") added code to fail parsing the path if
scsi_dh_attached_handler_name() failed with -ENOMEM, it didn't clean up
the reference to the path device that had just been taken. Fix this, and
steamline the error paths of parse_path() a little.

🎖@cveNotify

🚨 CVE-2026-43193
In the Linux kernel, the following vulnerability has been resolved:

nfsd: fix nfs4_file refcount leak in nfsd_get_dir_deleg()

Claude pointed out that there is a nfs4_file refcount leak in
nfsd_get_dir_deleg(). Ensure that the reference to "fp" is released
before returning.

🎖@cveNotify

🚨 CVE-2026-31772
In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync

hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.

This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:

BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71

Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry.

🎖@cveNotify

🚨 CVE-2026-31773
In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: SMP: derive legacy responder STK authentication from MITM state

The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.

For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.

This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated.

🎖@cveNotify

🚨 CVE-2026-31780
In the Linux kernel, the following vulnerability has been resolved:

wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation

The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.

This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.

Widen valuesize from u8 to u32 to accommodate the full range.

🎖@cveNotify

🚨 CVE-2026-31781
In the Linux kernel, the following vulnerability has been resolved:

drm/ioc32: stop speculation on the drm_compat_ioctl path

The drm compat ioctl path takes a user controlled pointer, and then
dereferences it into a table of function pointers, the signature method
of spectre problems. Fix this up by calling array_index_nospec() on the
index to the function pointer list.

🎖@cveNotify

🚨 CVE-2026-31782
In the Linux kernel, the following vulnerability has been resolved:

perf/x86: Fix potential bad container_of in intel_pmu_hw_config

Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check.

🎖@cveNotify

🚨 CVE-2026-31783
In the Linux kernel, the following vulnerability has been resolved:

spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback

aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal.

🎖@cveNotify

🚨 CVE-2026-43181
In the Linux kernel, the following vulnerability has been resolved:

gpio: sysfs: fix chip removal with GPIOs exported over sysfs

Currently if we export a GPIO over sysfs and unbind the parent GPIO
controller, the exported attribute will remain under /sys/class/gpio
because once we remove the parent device, we can no longer associate the
descriptor with it in gpiod_unexport() and never drop the final
reference.

Rework the teardown code: provide an unlocked variant of
gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken
before unregistering the parent device itself. This is done to prevent
any new exports happening before we unregister the device completely.

🎖@cveNotify

🚨 CVE-2026-43182
In the Linux kernel, the following vulnerability has been resolved:

media: ccs: Avoid possible division by zero

Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this.

🎖@cveNotify

🚨 CVE-2026-43183
In the Linux kernel, the following vulnerability has been resolved:

media: cx25821: Fix a resource leak in cx25821_dev_setup()

Add release_mem_region() if ioremap() fails to release the memory
region obtained by cx25821_get_resources().

🎖@cveNotify

🚨 CVE-2026-43184
In the Linux kernel, the following vulnerability has been resolved:

rnbd-srv: Zero the rsp buffer before using it

Before using the data buffer to send back the response message, zero it
completely. This prevents any stray bytes to be picked up by the client
side when there the message is exchanged between different protocol
versions.

🎖@cveNotify

🚨 CVE-2026-43185
In the Linux kernel, the following vulnerability has been resolved:

ksmbd: fix signededness bug in smb_direct_prepare_negotiation()

smb_direct_prepare_negotiation() casts an unsigned __u32 value
from sp->max_recv_size and req->preferred_send_size to a signed
int before computing min_t(int, ...). A maliciously provided
preferred_send_size of 0x80000000 will return as smaller than
max_recv_size, and then be used to set the maximum allowed
alowed receive size for the next message.

By sending a second message with a large value (>1420 bytes)
the attacker can then achieve a heap buffer overflow.

This fix replaces min_t(int, ...) with min_t(u32)

🎖@cveNotify

🚨 CVE-2026-43186
In the Linux kernel, the following vulnerability has been resolved:

ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()

On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.

Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:

- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.

Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00).

🎖@cveNotify

🚨 CVE-2026-43187
In the Linux kernel, the following vulnerability has been resolved:

xfs: delete attr leaf freemap entries when empty

Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size
underflow"), Brian Foster observed that it's possible for a small
freemap at the end of the end of the xattr entries array to experience
a size underflow when subtracting the space consumed by an expansion of
the entries array. There are only three freemap entries, which means
that it is not a complete index of all free space in the leaf block.

This code can leave behind a zero-length freemap entry with a nonzero
base. Subsequent setxattr operations can increase the base up to the
point that it overlaps with another freemap entry. This isn't in and of
itself a problem because the code in _leaf_add that finds free space
ignores any freemap entry with zero size.

However, there's another bug in the freemap update code in _leaf_add,
which is that it fails to update a freemap entry that begins midway
through the xattr entry that was just appended to the array. That can
result in the freemap containing two entries with the same base but
different sizes (0 for the "pushed-up" entry, nonzero for the entry
that's actually tracking free space). A subsequent _leaf_add can then
allocate xattr namevalue entries on top of the entries array, leading to
data loss. But fixing that is for later.

For now, eliminate the possibility of confusion by zeroing out the base
of any freemap entry that has zero size. Because the freemap is not
intended to be a complete index of free space, a subsequent failure to
find any free space for a new xattr will trigger block compaction, which
regenerates the freemap.

It looks like this bug has been in the codebase for quite a long time.

🎖@cveNotify

🚨 CVE-2026-43188
In the Linux kernel, the following vulnerability has been resolved:

ceph: do not propagate page array emplacement errors as batch errors

When fscrypt is enabled, move_dirty_folio_in_page_array() may fail
because it needs to allocate bounce buffers to store the encrypted
versions of each folio. Each folio beyond the first allocates its bounce
buffer with GFP_NOWAIT. Failures are common (and expected) under this
allocation mode; they should flush (not abort) the batch.

However, ceph_process_folio_batch() uses the same `rc` variable for its
own return code and for capturing the return codes of its routine calls;
failing to reset `rc` back to 0 results in the error being propagated
out to the main writeback loop, which cannot actually tolerate any
errors here: once `ceph_wbc.pages` is allocated, it must be passed to
ceph_submit_write() to be freed. If it survives until the next iteration
(e.g. due to the goto being followed), ceph_allocate_page_array()'s
BUG_ON() will oops the worker.

Note that this failure mode is currently masked due to another bug
(addressed next in this series) that prevents multiple encrypted folios
from being selected for the same write.

For now, just reset `rc` when redirtying the folio to prevent errors in
move_dirty_folio_in_page_array() from propagating. Note that
move_dirty_folio_in_page_array() is careful never to return errors on
the first folio, so there is no need to check for that. After this
change, ceph_process_folio_batch() no longer returns errors; its only
remaining failure indicator is `locked_pages == 0`, which the caller
already handles correctly.

🎖@cveNotify

🚨 CVE-2026-43189
In the Linux kernel, the following vulnerability has been resolved:

media: v4l2-async: Fix error handling on steps after finding a match

Once an async connection is found to be matching with an fwnode, a
sub-device may be registered (in case it wasn't already), its bound
operation is called, ancillary links are created, the async connection
is added to the sub-device's list of connections and removed from the
global waiting connection list. Further on, the sub-device's possible own
notifier is searched for possible additional matches.

Fix these specific issues:

- If v4l2_async_match_notify() failed before the sub-notifier handling,
the async connection was unbound and its entry removed from the
sub-device's async connection list. The latter part was also done in
v4l2_async_match_notify().

- The async connection's sd field was only set after creating ancillary
links in v4l2_async_match_notify(). It was however dereferenced in
v4l2_async_unbind_subdev_one(), which was called on error path of
v4l2_async_match_notify() failure.

🎖@cveNotify