🚨 CVE-2026-27693
Traccar is an open source GPS tracking system. In org.traccar:traccar versions starting at 6.11.1 before 6.13.0, the KML and GPX export functionality writes device names to XML output without proper escaping. An attacker with low privileges can create a device with a crafted name that injects XML content into exported files. If another user exports and opens the affected KML or GPX file, this can corrupt the file structure and spoof exported location data. This issue is fixed in version 6.13.0.
🎖@cveNotify
Traccar is an open source GPS tracking system. In org.traccar:traccar versions starting at 6.11.1 before 6.13.0, the KML and GPX export functionality writes device names to XML output without proper escaping. An attacker with low privileges can create a device with a crafted name that injects XML content into exported files. If another user exports and opens the affected KML or GPX file, this can corrupt the file structure and spoof exported location data. This issue is fixed in version 6.13.0.
🎖@cveNotify
GitHub
traccar/src/main/java/org/traccar/reports/GpxExportProvider.java at v6.11.0 · traccar/traccar
Traccar GPS Tracking System. Contribute to traccar/traccar development by creating an account on GitHub.
🚨 CVE-2026-43059
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly.
🎖@cveNotify
🚨 CVE-2026-43060
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: drop pending enqueued packets on removal
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: drop pending enqueued packets on removal
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies.
🎖@cveNotify
🚨 CVE-2026-43061
In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized.
🎖@cveNotify
🚨 CVE-2026-43062
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field.
🎖@cveNotify
🚨 CVE-2026-43063
In the Linux kernel, the following vulnerability has been resolved:
xfs: don't irele after failing to iget in xfs_attri_recover_work
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
xfs: don't irele after failing to iget in xfs_attri_recover_work
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that.
🎖@cveNotify
🚨 CVE-2026-43064
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed.
🎖@cveNotify
🚨 CVE-2026-43065
In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c.
🎖@cveNotify
🚨 CVE-2026-43066
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc() to get the inode location, which holds a
reference to iloc.bh that must be released via brelse().
However, several error paths jump to the 'out' label without
releasing iloc.bh:
- ext4_handle_dirty_metadata() failure
- sync_dirty_buffer() failure
- ext4_mark_inode_used() failure
- ext4_iget() failure
Fix this by introducing an 'out_brelse' label placed just before
the existing 'out' label to ensure iloc.bh is always released.
Additionally, make ext4_fc_replay_inode() propagate errors
properly instead of always returning 0.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc() to get the inode location, which holds a
reference to iloc.bh that must be released via brelse().
However, several error paths jump to the 'out' label without
releasing iloc.bh:
- ext4_handle_dirty_metadata() failure
- sync_dirty_buffer() failure
- ext4_mark_inode_used() failure
- ext4_iget() failure
Fix this by introducing an 'out_brelse' label placed just before
the existing 'out' label to ensure iloc.bh is always released.
Additionally, make ext4_fc_replay_inode() propagate errors
properly instead of always returning 0.
🎖@cveNotify
🚨 CVE-2026-43067
In the Linux kernel, the following vulnerability has been resolved:
ext4: handle wraparound when searching for blocks for indirect mapped blocks
Commit 4865c768b563 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups().
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ext4: handle wraparound when searching for blocks for indirect mapped blocks
Commit 4865c768b563 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups().
🎖@cveNotify
🚨 CVE-2026-43068
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): error count since last fsck: 1
EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760
EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760
...
According to the log analysis, blocks are always requested from the
corrupted block group. This may happen as follows:
ext4_mb_find_by_goal
ext4_mb_load_buddy
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_wait_block_bitmap
ext4_validate_block_bitmap
if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
return -EFSCORRUPTED; // There's no logs.
if (err)
return err; // Will return error
ext4_lock_group(ac->ac_sb, group);
if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable
goto out;
After commit 9008a58e5dce ("ext4: make the bitmap read routines return
real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group
as corrupt on block bitmap error") is no real solution for allocating
blocks from corrupted block groups. This is because if
'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then
'ext4_mb_load_buddy()' may return an error. This means that the block
allocation will fail.
Therefore, check block group if corrupted when ext4_mb_load_buddy()
returns error.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): error count since last fsck: 1
EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760
EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760
...
According to the log analysis, blocks are always requested from the
corrupted block group. This may happen as follows:
ext4_mb_find_by_goal
ext4_mb_load_buddy
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_wait_block_bitmap
ext4_validate_block_bitmap
if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
return -EFSCORRUPTED; // There's no logs.
if (err)
return err; // Will return error
ext4_lock_group(ac->ac_sb, group);
if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable
goto out;
After commit 9008a58e5dce ("ext4: make the bitmap read routines return
real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group
as corrupt on block bitmap error") is no real solution for allocating
blocks from corrupted block groups. This is because if
'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then
'ext4_mb_load_buddy()' may return an error. This means that the block
allocation will fail.
Therefore, check block group if corrupted when ext4_mb_load_buddy()
returns error.
🎖@cveNotify
🚨 CVE-2026-43069
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ll: Fix firmware leak on error path
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ll: Fix firmware leak on error path
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid.
🎖@cveNotify
🚨 CVE-2026-43070
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reset register ID for BPF_END value tracking
When a register undergoes a BPF_END (byte swap) operation, its scalar
value is mutated in-place. If this register previously shared a scalar ID
with another register (e.g., after an `r1 = r0` assignment), this tie must
be broken.
Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END.
Consequently, if a conditional jump checks the swapped register, the
verifier incorrectly propagates the learned bounds to the linked register,
leading to false confidence in the linked register's value and potentially
allowing out-of-bounds memory accesses.
Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case
to break the scalar tie, similar to how BPF_NEG handles it via
`__mark_reg_known`.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reset register ID for BPF_END value tracking
When a register undergoes a BPF_END (byte swap) operation, its scalar
value is mutated in-place. If this register previously shared a scalar ID
with another register (e.g., after an `r1 = r0` assignment), this tie must
be broken.
Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END.
Consequently, if a conditional jump checks the swapped register, the
verifier incorrectly propagates the learned bounds to the linked register,
leading to false confidence in the linked register's value and potentially
allowing out-of-bounds memory accesses.
Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case
to break the scalar tie, similar to how BPF_NEG handles it via
`__mark_reg_known`.
🎖@cveNotify
🚨 CVE-2026-43071
In the Linux kernel, the following vulnerability has been resolved:
dcache: Limit the minimal number of bucket to two
There is an OOB read problem on dentry_hashtable when user sets
'dhash_entries=1':
BUG: unable to handle page fault for address: ffff888b30b774b0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP PTI
RIP: 0010:__d_lookup+0x56/0x120
Call Trace:
d_lookup.cold+0x16/0x5d
lookup_dcache+0x27/0xf0
lookup_one_qstr_excl+0x2a/0x180
start_dirop+0x55/0xa0
simple_start_creating+0x8d/0xa0
debugfs_start_creating+0x8c/0x180
debugfs_create_dir+0x1d/0x1c0
pinctrl_init+0x6d/0x140
do_one_initcall+0x6d/0x3d0
kernel_init_freeable+0x39f/0x460
kernel_init+0x2a/0x260
There will be only one bucket in dentry_hashtable when dhash_entries is
set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then,
following process will access more than one buckets(which memory region
is not allocated) in dentry_hashtable:
d_lookup
b = d_hash(hash)
dentry_hashtable + ((u32)hashlen >> d_hash_shift)
// The C standard defines the behavior of right shift amounts
// exceeding the bit width of the operand as undefined. The
// result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen',
// so 'b' will point to an unallocated memory region.
hlist_bl_for_each_entry_rcu(b)
hlist_bl_first_rcu(head)
h->first // read OOB!
Fix it by limiting the minimal number of dentry_hashtable bucket to two,
so that 'd_hash_shift' won't exceeds the bit width of type u32.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
dcache: Limit the minimal number of bucket to two
There is an OOB read problem on dentry_hashtable when user sets
'dhash_entries=1':
BUG: unable to handle page fault for address: ffff888b30b774b0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP PTI
RIP: 0010:__d_lookup+0x56/0x120
Call Trace:
d_lookup.cold+0x16/0x5d
lookup_dcache+0x27/0xf0
lookup_one_qstr_excl+0x2a/0x180
start_dirop+0x55/0xa0
simple_start_creating+0x8d/0xa0
debugfs_start_creating+0x8c/0x180
debugfs_create_dir+0x1d/0x1c0
pinctrl_init+0x6d/0x140
do_one_initcall+0x6d/0x3d0
kernel_init_freeable+0x39f/0x460
kernel_init+0x2a/0x260
There will be only one bucket in dentry_hashtable when dhash_entries is
set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then,
following process will access more than one buckets(which memory region
is not allocated) in dentry_hashtable:
d_lookup
b = d_hash(hash)
dentry_hashtable + ((u32)hashlen >> d_hash_shift)
// The C standard defines the behavior of right shift amounts
// exceeding the bit width of the operand as undefined. The
// result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen',
// so 'b' will point to an unallocated memory region.
hlist_bl_for_each_entry_rcu(b)
hlist_bl_first_rcu(head)
h->first // read OOB!
Fix it by limiting the minimal number of dentry_hashtable bucket to two,
so that 'd_hash_shift' won't exceeds the bit width of type u32.
🎖@cveNotify
🚨 CVE-2026-43072
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok.
🎖@cveNotify
🚨 CVE-2026-43073
In the Linux kernel, the following vulnerability has been resolved:
x86-64: rename misleadingly named '__copy_user_nocache()' function
This function was a masterclass in bad naming, for various historical
reasons.
It claimed to be a non-cached user copy. It is literally _neither_ of
those things. It's a specialty memory copy routine that uses
non-temporal stores for the destination (but not the source), and that
does exception handling for both source and destination accesses.
Also note that while it works for unaligned targets, any unaligned parts
(whether at beginning or end) will not use non-temporal stores, since
only words and quadwords can be non-temporal on x86.
The exception handling means that it _can_ be used for user space
accesses, but not on its own - it needs all the normal "start user space
access" logic around it.
But typically the user space access would be the source, not the
non-temporal destination. That was the original intention of this,
where the destination was some fragile persistent memory target that
needed non-temporal stores in order to catch machine check exceptions
synchronously and deal with them gracefully.
Thus that non-descriptive name: one use case was to copy from user space
into a non-cached kernel buffer. However, the existing users are a mix
of that intended use-case, and a couple of random drivers that just did
this as a performance tweak.
Some of those random drivers then actively misused the user copying
version (with STAC/CLAC and all) to do kernel copies without ever even
caring about the exception handling, _just_ for the non-temporal
destination.
Rename it as a first small step to actually make it halfway sane, and
change the prototype to be more normal: it doesn't take a user pointer
unless the caller has done the proper conversion, and the argument size
is the full size_t (it still won't actually copy more than 4GB in one
go, but there's also no reason to silently truncate the size argument in
the caller).
Finally, use this now sanely named function in the NTB code, which
mis-used a user copy version (with STAC/CLAC and all) of this interface
despite it not actually being a user copy at all.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
x86-64: rename misleadingly named '__copy_user_nocache()' function
This function was a masterclass in bad naming, for various historical
reasons.
It claimed to be a non-cached user copy. It is literally _neither_ of
those things. It's a specialty memory copy routine that uses
non-temporal stores for the destination (but not the source), and that
does exception handling for both source and destination accesses.
Also note that while it works for unaligned targets, any unaligned parts
(whether at beginning or end) will not use non-temporal stores, since
only words and quadwords can be non-temporal on x86.
The exception handling means that it _can_ be used for user space
accesses, but not on its own - it needs all the normal "start user space
access" logic around it.
But typically the user space access would be the source, not the
non-temporal destination. That was the original intention of this,
where the destination was some fragile persistent memory target that
needed non-temporal stores in order to catch machine check exceptions
synchronously and deal with them gracefully.
Thus that non-descriptive name: one use case was to copy from user space
into a non-cached kernel buffer. However, the existing users are a mix
of that intended use-case, and a couple of random drivers that just did
this as a performance tweak.
Some of those random drivers then actively misused the user copying
version (with STAC/CLAC and all) to do kernel copies without ever even
caring about the exception handling, _just_ for the non-temporal
destination.
Rename it as a first small step to actually make it halfway sane, and
change the prototype to be more normal: it doesn't take a user pointer
unless the caller has done the proper conversion, and the argument size
is the full size_t (it still won't actually copy more than 4GB in one
go, but there's also no reason to silently truncate the size argument in
the caller).
Finally, use this now sanely named function in the NTB code, which
mis-used a user copy version (with STAC/CLAC and all) of this interface
despite it not actually being a user copy at all.
🎖@cveNotify
🚨 CVE-2026-31431
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly.
🎖@cveNotify
🚨 CVE-2026-24696
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
🎖@cveNotify
The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access.
🎖@cveNotify
GitHub
CSAF/csaf_files/OT/white/2026/icsa-26-062-08.json at develop · cisagov/CSAF
CISA CSAF Security Advisories. Contribute to cisagov/CSAF development by creating an account on GitHub.
🚨 CVE-2026-26288
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
🎖@cveNotify
WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend.
🎖@cveNotify
GitHub
CSAF/csaf_files/OT/white/2026/icsa-26-062-08.json at develop · cisagov/CSAF
CISA CSAF Security Advisories. Contribute to cisagov/CSAF development by creating an account on GitHub.
🚨 CVE-2026-25866
MobaXterm versions prior to 26.1 contain an uncontrolled search path element vulnerability. The application calls WinExec to execute Notepad++ without a fully qualified executable path when opening remote files. An attacker can exploit the search path behavior by placing a malicious executable earlier in the search order, resulting in arbitrary code execution in the context of the affected user.
🎖@cveNotify
MobaXterm versions prior to 26.1 contain an uncontrolled search path element vulnerability. The application calls WinExec to execute Notepad++ without a fully qualified executable path when opening remote files. An attacker can exploit the search path behavior by placing a malicious executable earlier in the search order, resulting in arbitrary code execution in the context of the affected user.
🎖@cveNotify
mobaxterm.mobatek.net
The ultimate toolbox for remote computing - includes X server, enhanced SSH client and much more!
🚨 CVE-2026-3588
A server-side request forgery (SSRF) vulnerability in IKEA Dirigera v2.866.4 allows an attacker to exfiltrate private keys by sending a crafted request.
🎖@cveNotify
A server-side request forgery (SSRF) vulnerability in IKEA Dirigera v2.866.4 allows an attacker to exfiltrate private keys by sending a crafted request.
🎖@cveNotify
Nozominetworks
CVE-2026-3588 | Nozomi Networks Labs
A server-side request forgery (SSRF) vulnerability in IKEA Dirigera v2.866.4 allows an attacker to exfiltrate private keys by sending a crafted request.CVE-2026-3588