🚨 CVE-2025-11950
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in KNOWHY Advanced Technology Trading Ltd. Co. EduAsist allows Reflected XSS.This issue affects EduAsist: through 27022026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in KNOWHY Advanced Technology Trading Ltd. Co. EduAsist allows Reflected XSS.This issue affects EduAsist: through 27022026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
🚨 CVE-2026-24306
Improper access control in Azure Front Door (AFD) allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
Improper access control in Azure Front Door (AFD) allows an unauthorized attacker to elevate privileges over a network.
🎖@cveNotify
🚨 CVE-2026-1610
A vulnerability was found in Tenda AX12 Pro V2 16.03.49.24_cn. Affected by this issue is some unknown functionality of the component Telnet Service. Performing a manipulation results in hard-coded credentials. The attack is possible to be carried out remotely. A high degree of complexity is needed for the attack. The exploitation is known to be difficult. The exploit has been made public and could be used.
🎖@cveNotify
A vulnerability was found in Tenda AX12 Pro V2 16.03.49.24_cn. Affected by this issue is some unknown functionality of the component Telnet Service. Performing a manipulation results in hard-coded credentials. The attack is possible to be carried out remotely. A high degree of complexity is needed for the attack. The exploitation is known to be difficult. The exploit has been made public and could be used.
🎖@cveNotify
🚨 CVE-2026-23515
Signal K Server is a server application that runs on a central hub in a boat. Prior to 1.5.0, a command injection vulnerability allows authenticated users with write permissions to execute arbitrary shell commands on the Signal K server when the set-system-time plugin is enabled. Unauthenticated users can also exploit this vulnerability if security is disabled on the Signal K server. This occurs due to unsafe construction of shell commands when processing navigation.datetime values received via WebSocket delta messages. This vulnerability is fixed in 1.5.0.
🎖@cveNotify
Signal K Server is a server application that runs on a central hub in a boat. Prior to 1.5.0, a command injection vulnerability allows authenticated users with write permissions to execute arbitrary shell commands on the Signal K server when the set-system-time plugin is enabled. Unauthenticated users can also exploit this vulnerability if security is disabled on the Signal K server. This occurs due to unsafe construction of shell commands when processing navigation.datetime values received via WebSocket delta messages. This vulnerability is fixed in 1.5.0.
🎖@cveNotify
GitHub
fix: validate datetime format before shell interpolation · SignalK/set-system-time@75b11ea
Signal K Node server plugin to set system time on time data from GPS - fix: validate datetime format before shell interpolation · SignalK/set-system-time@75b11ea
🚨 CVE-2026-2108
A vulnerability was determined in jsbroks COCO Annotator up to 0.11.1. This impacts an unknown function of the file /api/info/long_task of the component Endpoint. This manipulation causes denial of service. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A vulnerability was determined in jsbroks COCO Annotator up to 0.11.1. This impacts an unknown function of the file /api/info/long_task of the component Endpoint. This manipulation causes denial of service. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
GitHub
vulnerability-research/coco-anotator/Unauthenticated Task Queue Flood in COCO Annotator 2f1ef09b873680f99d39e3f7db9886fa.md at…
Contribute to nmmorette/vulnerability-research development by creating an account on GitHub.
🚨 CVE-2026-2109
A vulnerability was identified in jsbroks COCO Annotator up to 0.11.1. Affected is an unknown function of the file /api/undo/ of the component Delete Category Handler. Such manipulation of the argument ID leads to improper authorization. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
A vulnerability was identified in jsbroks COCO Annotator up to 0.11.1. Affected is an unknown function of the file /api/undo/ of the component Delete Category Handler. Such manipulation of the argument ID leads to improper authorization. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
GitHub
vulnerability-research/BFLA COCO Annotator in DELETE api undo/BFLA COCO Annotator in DELETE api undo 2f1ef09b8736807aa1f7ede4b64fa35d.md…
Contribute to nmmorette/vulnerability-research development by creating an account on GitHub.
🔥1
🚨 CVE-2025-54236
Adobe Commerce versions 2.4.9-alpha2, 2.4.8-p2, 2.4.7-p7, 2.4.6-p12, 2.4.5-p14, 2.4.4-p15 and earlier are affected by an Improper Input Validation vulnerability. A successful attacker can abuse this to achieve session takeover, increasing the confidentiality, and integrity impact to high. Exploitation of this issue does not require user interaction.
🎖@cveNotify
Adobe Commerce versions 2.4.9-alpha2, 2.4.8-p2, 2.4.7-p7, 2.4.6-p12, 2.4.5-p14, 2.4.4-p15 and earlier are affected by an Improper Input Validation vulnerability. A successful attacker can abuse this to achieve session takeover, increasing the confidentiality, and integrity impact to high. Exploitation of this issue does not require user interaction.
🎖@cveNotify
Adobe
Adobe Security Bulletin
Security Updates Available for Adobe Commerce | APSB25-88
🚨 CVE-2026-24130
Moonraker is a Python web server providing API access to Klipper 3D printing firmware. In versions 0.9.3 and below, instances configured with the "ldap" component enabled are vulnerable to LDAP search filter injection techniques via the login endpoint. The 401 error response message can be used to determine whether or not a search was successful, allowing for brute force methods to discover LDAP entries on the server such as user IDs and user attributes. This issue has been fixed in version 0.10.0.
🎖@cveNotify
Moonraker is a Python web server providing API access to Klipper 3D printing firmware. In versions 0.9.3 and below, instances configured with the "ldap" component enabled are vulnerable to LDAP search filter injection techniques via the login endpoint. The 401 error response message can be used to determine whether or not a search was successful, allowing for brute force methods to discover LDAP entries on the server such as user IDs and user attributes. This issue has been fixed in version 0.10.0.
🎖@cveNotify
GitHub
ldap: resolve filter injection vulnerability · Arksine/moonraker@74c5d8e
Escape filter characters from the username before substituting in the filter. This resolves a vulnerability where Moonraker could be used to dump all users and their attributes from a configured ...
🚨 CVE-2026-2302
Under specific conditions when processing a maliciously crafted value of type Hash r, Mongoid::Criteria.from_hash may allow for executing arbitrary Ruby code.
🎖@cveNotify
Under specific conditions when processing a maliciously crafted value of type Hash r, Mongoid::Criteria.from_hash may allow for executing arbitrary Ruby code.
🎖@cveNotify
🚨 CVE-2025-1242
The administrative credentials can be extracted through application API responses, mobile application reverse engineering, and device firmware reverse engineering. The exposure may result in an attacker gaining full administrative access to the Gardyn IoT Hub exposing connected devices to malicious control.
🎖@cveNotify
The administrative credentials can be extracted through application API responses, mobile application reverse engineering, and device firmware reverse engineering. The exposure may result in an attacker gaining full administrative access to the Gardyn IoT Hub exposing connected devices to malicious control.
🎖@cveNotify
🚨 CVE-2025-50180
esm.sh is a no-build content delivery network (CDN) for web development. In version 136, esm.sh is vulnerable to a full-response SSRF, allowing an attacker to retrieve information from internal websites through the vulnerability. Version 137 fixes the vulnerability.
🎖@cveNotify
esm.sh is a no-build content delivery network (CDN) for web development. In version 136, esm.sh is vulnerable to a full-response SSRF, allowing an attacker to retrieve information from internal websites through the vulnerability. Version 137 fixes the vulnerability.
🎖@cveNotify
🚨 CVE-2025-69771
An arbitrary file upload vulnerability in the subtitle loading function of asbplayer v1.13.0 allows attackers to execute arbitrary code via uploading a crafted subtitle file.
🎖@cveNotify
An arbitrary file upload vulnerability in the subtitle loading function of asbplayer v1.13.0 allows attackers to execute arbitrary code via uploading a crafted subtitle file.
🎖@cveNotify
Google
Google Chrome - The Fast & Secure Web Browser Built to be Yours
Chrome is the official web browser from Google, built to be fast, secure, and customizable. Download now and make it yours.
🚨 CVE-2026-22866
Ethereum Name Service (ENS) is a distributed, open, and extensible naming system based on the Ethereum blockchain. In versions 1.6.2 and prior, the `RSASHA256Algorithm` and `RSASHA1Algorithm` contracts fail to validate PKCS#1 v1.5 padding structure when verifying RSA signatures. The contracts only check if the last 32 (or 20) bytes of the decrypted signature match the expected hash. This enables Bleichenbacher's 2006 signature forgery attack against DNS zones using RSA keys with low public exponents (e=3). Two ENS-supported TLDs (.cc and .name) use e=3 for their Key Signing Keys, allowing any domain under these TLDs to be fraudulently claimed on ENS without DNS ownership. Apatch was merged at commit c76c5ad0dc9de1c966443bd946fafc6351f87587. Possible workarounds include deploying the patched contracts and pointing DNSSECImpl.setAlgorithm to the deployed contract.
🎖@cveNotify
Ethereum Name Service (ENS) is a distributed, open, and extensible naming system based on the Ethereum blockchain. In versions 1.6.2 and prior, the `RSASHA256Algorithm` and `RSASHA1Algorithm` contracts fail to validate PKCS#1 v1.5 padding structure when verifying RSA signatures. The contracts only check if the last 32 (or 20) bytes of the decrypted signature match the expected hash. This enables Bleichenbacher's 2006 signature forgery attack against DNS zones using RSA keys with low public exponents (e=3). Two ENS-supported TLDs (.cc and .name) use e=3 for their Key Signing Keys, allowing any domain under these TLDs to be fraudulently claimed on ENS without DNS ownership. Apatch was merged at commit c76c5ad0dc9de1c966443bd946fafc6351f87587. Possible workarounds include deploying the patched contracts and pointing DNSSECImpl.setAlgorithm to the deployed contract.
🎖@cveNotify
GitHub
GitHub - ensdomains/ens-contracts-bug-62248-pr-509: bug-62248-pr-509 deployment instruction
bug-62248-pr-509 deployment instruction. Contribute to ensdomains/ens-contracts-bug-62248-pr-509 development by creating an account on GitHub.
🚨 CVE-2026-27700
Hono is a Web application framework that provides support for any JavaScript runtime. In versions 4.12.0 and 4.12.1, when using the AWS Lambda adapter (`hono/aws-lambda`) behind an Application Load Balancer (ALB), the `getConnInfo()` function incorrectly selected the first value from the `X-Forwarded-For` header. Because AWS ALB appends the real client IP address to the end of the `X-Forwarded-For` header, the first value can be attacker-controlled. This could allow IP-based access control mechanisms (such as the `ipRestriction` middleware) to be bypassed. Version 4.12.2 patches the issue.
🎖@cveNotify
Hono is a Web application framework that provides support for any JavaScript runtime. In versions 4.12.0 and 4.12.1, when using the AWS Lambda adapter (`hono/aws-lambda`) behind an Application Load Balancer (ALB), the `getConnInfo()` function incorrectly selected the first value from the `X-Forwarded-For` header. Because AWS ALB appends the real client IP address to the end of the `X-Forwarded-For` header, the first value can be attacker-controlled. This could allow IP-based access control mechanisms (such as the `ipRestriction` middleware) to be bypassed. Version 4.12.2 patches the issue.
🎖@cveNotify
GitHub
Merge commit from fork · honojs/hono@41adbf5
* fix(aws-lambda): use last X-Forwarded-For IP in ALB adapter
ALB appends the real client IP to the end of the X-Forwarded-For header.
Taking the first value allows attackers to spoof their IP by ...
ALB appends the real client IP to the end of the X-Forwarded-For header.
Taking the first value allows attackers to spoof their IP by ...
🚨 CVE-2026-27701
LiveCode is an open-source, client-side code playground. Prior to commit e151c64c2bd80d2d53ac1333f1df9429fe6a1a11, LiveCode's `i18n-update-pull` GitHub Actions workflow is vulnerable to JavaScript injection. The title of the Pull Request associated with the triggering issue comment is interpolated directly into a `actions/github-script` JavaScript block using a GitHub Actions template expression. An attacker who opens a PR with a crafted title can inject arbitrary JavaScript that executes with the privileges of the CI bot token (`CI_APP_ID` / `CI_APP_PRIVATE_KEY`), enabling exfiltration of repository secrets and unauthorized GitHub API operations. Commit e151c64c2bd80d2d53ac1333f1df9429fe6a1a11 fixes the issue.
🎖@cveNotify
LiveCode is an open-source, client-side code playground. Prior to commit e151c64c2bd80d2d53ac1333f1df9429fe6a1a11, LiveCode's `i18n-update-pull` GitHub Actions workflow is vulnerable to JavaScript injection. The title of the Pull Request associated with the triggering issue comment is interpolated directly into a `actions/github-script` JavaScript block using a GitHub Actions template expression. An attacker who opens a PR with a crafted title can inject arbitrary JavaScript that executes with the privileges of the CI bot token (`CI_APP_ID` / `CI_APP_PRIVATE_KEY`), enabling exfiltration of repository secrets and unauthorized GitHub API operations. Commit e151c64c2bd80d2d53ac1333f1df9429fe6a1a11 fixes the issue.
🎖@cveNotify
GitHub
ci(i18n): fix github action security issue · live-codes/livecodes@e151c64
A Code Playground That Just Works! Contribute to live-codes/livecodes development by creating an account on GitHub.
🚨 CVE-2026-27702
Budibase is a low code platform for creating internal tools, workflows, and admin panels. Prior to version 3.30.4, an unsafe `eval()` vulnerability in Budibase's view filtering implementation allows any authenticated user (including free tier accounts) to execute arbitrary JavaScript code on the server. This vulnerability ONLY affects Budibase Cloud (SaaS) - self-hosted deployments use native CouchDB views and are not vulnerable. The vulnerability exists in `packages/server/src/db/inMemoryView.ts` where user-controlled view map functions are directly evaluated without sanitization. The primary impact comes from what lives inside the pod's environment: the `app-service` pod runs with secrets baked into its environment variables, including `INTERNAL_API_KEY`, `JWT_SECRET`, CouchDB admin credentials, AWS keys, and more. Using the extracted CouchDB credentials, we verified direct database access, enumerated all tenant databases, and confirmed that user records (email addresses) are readable. Version 3.30.4 contains a patch.
🎖@cveNotify
Budibase is a low code platform for creating internal tools, workflows, and admin panels. Prior to version 3.30.4, an unsafe `eval()` vulnerability in Budibase's view filtering implementation allows any authenticated user (including free tier accounts) to execute arbitrary JavaScript code on the server. This vulnerability ONLY affects Budibase Cloud (SaaS) - self-hosted deployments use native CouchDB views and are not vulnerable. The vulnerability exists in `packages/server/src/db/inMemoryView.ts` where user-controlled view map functions are directly evaluated without sanitization. The primary impact comes from what lives inside the pod's environment: the `app-service` pod runs with secrets baked into its environment variables, including `INTERNAL_API_KEY`, `JWT_SECRET`, CouchDB admin credentials, AWS keys, and more. Using the extracted CouchDB credentials, we verified direct database access, enumerated all tenant databases, and confirmed that user records (email addresses) are readable. Version 3.30.4 contains a patch.
🎖@cveNotify
GitHub
Merge pull request #18087 from Budibase/fix/views-security-issue · Budibase/budibase@3486598
views security issue
❤1
🚨 CVE-2026-27704
The Dart and Flutter SDKs provide software development kits for the Dart programming language. In versions of the Dart SDK prior to 3.11.0 and the Flutter SDK prior to version 3.41.0, when the pub client (`dart pub` and `flutter pub`) extracts a package in the pub cache, a malicious package archive can have files extracted outside the destination directory in the `PUB_CACHE`. A fix has been landed in commit 26c6985c742593d081f8b58450f463a584a4203a. By normalizing the file path before writing file, the attacker can no longer traverse up via a symlink. This patch is released in Dart 3.11.0 and Flutter 3.41.0.vAll packages on pub.dev have been vetted for this vulnerability. New packages are no longer allowed to contain symlinks. The pub client itself doesn't upload symlinks, but duplicates the linked entry, and has been doing this for years. Those whose dependencies are all from pub.dev, third-party repositories trusted to not contain malicious code, or git dependencies are not affected by this vulnerability.
🎖@cveNotify
The Dart and Flutter SDKs provide software development kits for the Dart programming language. In versions of the Dart SDK prior to 3.11.0 and the Flutter SDK prior to version 3.41.0, when the pub client (`dart pub` and `flutter pub`) extracts a package in the pub cache, a malicious package archive can have files extracted outside the destination directory in the `PUB_CACHE`. A fix has been landed in commit 26c6985c742593d081f8b58450f463a584a4203a. By normalizing the file path before writing file, the attacker can no longer traverse up via a symlink. This patch is released in Dart 3.11.0 and Flutter 3.41.0.vAll packages on pub.dev have been vetted for this vulnerability. New packages are no longer allowed to contain symlinks. The pub client itself doesn't upload symlinks, but duplicates the linked entry, and has been doing this for years. Those whose dependencies are all from pub.dev, third-party repositories trusted to not contain malicious code, or git dependencies are not affected by this vulnerability.
🎖@cveNotify
GitHub
Normalize path before writing file when extracting tar.gz (#4752) · dart-lang/pub@26c6985
The pub command line tool. Contribute to dart-lang/pub development by creating an account on GitHub.
🚨 CVE-2026-27730
esm.sh is a no-build content delivery network (CDN) for web development. Versions up to and including 137 have an SSRF vulnerability (CWE-918) in esm.sh’s `/http(s)` fetch route. The service tries to block localhost/internal targets, but the validation is based on hostname string checks and can be bypassed using DNS alias domains. This allows an external requester to make the esm.sh server fetch internal localhost services. As of time of publication, no known patched versions exist.
🎖@cveNotify
esm.sh is a no-build content delivery network (CDN) for web development. Versions up to and including 137 have an SSRF vulnerability (CWE-918) in esm.sh’s `/http(s)` fetch route. The service tries to block localhost/internal targets, but the validation is based on hostname string checks and can be bypassed using DNS alias domains. This allows an external requester to make the esm.sh server fetch internal localhost services. As of time of publication, no known patched versions exist.
🎖@cveNotify
GitHub
SSRF localhost/private-network bypass in `/http(s)` module route
### Summary
An SSRF vulnerability (CWE-918) exists in esm.sh’s `/http(s)` fetch route.
The service tries to block localhost/internal targets, but the validation is based on hostname string chec...
An SSRF vulnerability (CWE-918) exists in esm.sh’s `/http(s)` fetch route.
The service tries to block localhost/internal targets, but the validation is based on hostname string chec...
🚨 CVE-2026-27846
Due to missing authentication, a user with physical access to the device can misuse the mesh functionality for adding a new mesh device to the network
to gain access to sensitive information, including the password for admin access to the web interface and the Wi-Fi passwords.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200.
🎖@cveNotify
Due to missing authentication, a user with physical access to the device can misuse the mesh functionality for adding a new mesh device to the network
to gain access to sensitive information, including the password for admin access to the web interface and the Wi-Fi passwords.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200.
🎖@cveNotify
🚨 CVE-2026-27847
Due to improper neutralization of special elements, SQL statements can be injected via the handshake of a TLS-SRP connection. This can be used to inject known credentials into the database that can be utilized to successfully complete the handshake and use the protected service.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200.
🎖@cveNotify
Due to improper neutralization of special elements, SQL statements can be injected via the handshake of a TLS-SRP connection. This can be used to inject known credentials into the database that can be utilized to successfully complete the handshake and use the protected service.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200.
🎖@cveNotify
🚨 CVE-2026-27848
Due to missing neutralization of special elements, OS commands can be injected via the handshake of a TLS-SRP connection, which are ultimately run as the root user.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200.
🎖@cveNotify
Due to missing neutralization of special elements, OS commands can be injected via the handshake of a TLS-SRP connection, which are ultimately run as the root user.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200.
🎖@cveNotify
❤1