π¨ CVE-2026-27117
bit7z is a cross-platform C++ static library that allows the compression/extraction of archive files. Prior to version 4.0.11, a path traversal vulnerability ("Zip Slip") exists in bit7z's archive extraction functionality. The library does not adequately validate file paths contained in archive entries, allowing files to be written outside the intended extraction directory through three distinct mechanisms: relative path traversal, absolute path traversal, and symbolic link traversal. An attacker can exploit this by providing a malicious archive to any application that uses bit7z to extract untrusted archives. Successful exploitation results in arbitrary file write with the privileges of the process performing the extraction. This could lead to overwriting of application binaries, configuration files, or other sensitive data. The vulnerability does not directly enable reading of file contents; the confidentiality impact is limited to the calling application's own behavior after extraction. However, applications that subsequently serve or display extracted files may face secondary confidentiality risks from attacker-created symlinks. Fixes have been released in version 4.0.11. If upgrading is not immediately possible, users can mitigate the vulnerability by validating each entry's destination path before writing. Other mitigations include running extraction with least privilege and extracting untrusted archives in a sandboxed directory.
π@cveNotify
bit7z is a cross-platform C++ static library that allows the compression/extraction of archive files. Prior to version 4.0.11, a path traversal vulnerability ("Zip Slip") exists in bit7z's archive extraction functionality. The library does not adequately validate file paths contained in archive entries, allowing files to be written outside the intended extraction directory through three distinct mechanisms: relative path traversal, absolute path traversal, and symbolic link traversal. An attacker can exploit this by providing a malicious archive to any application that uses bit7z to extract untrusted archives. Successful exploitation results in arbitrary file write with the privileges of the process performing the extraction. This could lead to overwriting of application binaries, configuration files, or other sensitive data. The vulnerability does not directly enable reading of file contents; the confidentiality impact is limited to the calling application's own behavior after extraction. However, applications that subsequently serve or display extracted files may face secondary confidentiality risks from attacker-created symlinks. Fixes have been released in version 4.0.11. If upgrading is not immediately possible, users can mitigate the vulnerability by validating each entry's destination path before writing. Other mitigations include running extraction with least privilege and extracting untrusted archives in a sandboxed directory.
π@cveNotify
GitHub
Apply path sanitization also when restoring symbolic links Β· rikyoz/bit7z@31763da
A C++ static library offering a clean and simple interface to the 7-zip shared libraries. - Apply path sanitization also when restoring symbolic links Β· rikyoz/bit7z@31763da
π¨ CVE-2026-27593
Statmatic is a Laravel and Git powered content management system (CMS). Prior to versions 6.3.3 and 5.73.10, an attacker may leverage a vulnerability in the password reset feature to capture a user's token and reset the password on their behalf. The attacker must know the email address of a valid account on the site, and the actual user must blindly click the link in their email even though they didn't request the reset. This has been fixed in 6.3.3 and 5.73.10.
π@cveNotify
Statmatic is a Laravel and Git powered content management system (CMS). Prior to versions 6.3.3 and 5.73.10, an attacker may leverage a vulnerability in the password reset feature to capture a user's token and reset the password on their behalf. The attacker must know the email address of a valid account on the site, and the actual user must blindly click the link in their email even though they didn't request the reset. This has been fixed in 6.3.3 and 5.73.10.
π@cveNotify
GitHub
wip Β· statamic/cms@6fdd033
The core Laravel CMS Composer package. Contribute to statamic/cms development by creating an account on GitHub.
π¨ CVE-2026-3145
A flaw has been found in libvips up to 8.18.0. The affected element is the function vips_foreign_load_matrix_file_is_a/vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. Executing a manipulation can lead to memory corruption. The attack needs to be launched locally. This patch is called d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. A patch should be applied to remediate this issue.
π@cveNotify
A flaw has been found in libvips up to 8.18.0. The affected element is the function vips_foreign_load_matrix_file_is_a/vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. Executing a manipulation can lead to memory corruption. The attack needs to be launched locally. This patch is called d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. A patch should be applied to remediate this issue.
π@cveNotify
GitHub
GitHub - libvips/libvips: A fast image processing library with low memory needs.
A fast image processing library with low memory needs. - libvips/libvips
π¨ CVE-2026-3146
A vulnerability has been found in libvips up to 8.18.0. The impacted element is the function vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. The manipulation leads to null pointer dereference. The attack needs to be performed locally. The identifier of the patch is d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. To fix this issue, it is recommended to deploy a patch.
π@cveNotify
A vulnerability has been found in libvips up to 8.18.0. The impacted element is the function vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. The manipulation leads to null pointer dereference. The attack needs to be performed locally. The identifier of the patch is d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. To fix this issue, it is recommended to deploy a patch.
π@cveNotify
GitHub
GitHub - libvips/libvips: A fast image processing library with low memory needs.
A fast image processing library with low memory needs. - libvips/libvips
π¨ CVE-2026-3147
A vulnerability was found in libvips up to 8.18.0. This affects the function vips_foreign_load_csv_build of the file libvips/foreign/csvload.c. The manipulation results in heap-based buffer overflow. The attack requires a local approach. The exploit has been made public and could be used. The patch is identified as b3ab458a25e0e261cbd1788474bbc763f7435780. It is advisable to implement a patch to correct this issue.
π@cveNotify
A vulnerability was found in libvips up to 8.18.0. This affects the function vips_foreign_load_csv_build of the file libvips/foreign/csvload.c. The manipulation results in heap-based buffer overflow. The attack requires a local approach. The exploit has been made public and could be used. The patch is identified as b3ab458a25e0e261cbd1788474bbc763f7435780. It is advisable to implement a patch to correct this issue.
π@cveNotify
GitHub
GitHub - libvips/libvips: A fast image processing library with low memory needs.
A fast image processing library with low memory needs. - libvips/libvips
π¨ CVE-2022-20775
A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain elevated privileges.
This vulnerability is due to improper access controls on commands within the application CLI. An attacker could exploit this vulnerability by running a maliciously crafted command on the application CLI. A successful exploit could allow the attacker to execute arbitrary commands as the root user.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sd-wan-priv-E6e8tEdF
π@cveNotify
A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain elevated privileges.
This vulnerability is due to improper access controls on commands within the application CLI. An attacker could exploit this vulnerability by running a maliciously crafted command on the application CLI. A successful exploit could allow the attacker to execute arbitrary commands as the root user.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sd-wan-priv-E6e8tEdF
π@cveNotify
Cisco
Cisco Security Advisory: Cisco SD-WAN Software Privilege Escalation Vulnerabilities
Multiple vulnerabilities in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain elevated privileges.
These vulnerabilities are due to improper access controls on commands within the application CLI. An attacker could exploitβ¦
These vulnerabilities are due to improper access controls on commands within the application CLI. An attacker could exploitβ¦
π¨ CVE-2024-4418
A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it.
π@cveNotify
A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it.
π@cveNotify
π¨ CVE-2024-4540
A flaw was found in Keycloak in OAuth 2.0 Pushed Authorization Requests (PAR). Client-provided parameters were found to be included in plain text in the KC_RESTART cookie returned by the authorization server's HTTP response to a `request_uri` authorization request, possibly leading to an information disclosure vulnerability.
π@cveNotify
A flaw was found in Keycloak in OAuth 2.0 Pushed Authorization Requests (PAR). Client-provided parameters were found to be included in plain text in the KC_RESTART cookie returned by the authorization server's HTTP response to a `request_uri` authorization request, possibly leading to an information disclosure vulnerability.
π@cveNotify
π¨ CVE-2024-6162
A vulnerability was found in Undertow, where URL-encoded request paths can be mishandled during concurrent requests on the AJP listener. This issue arises because the same buffer is used to decode the paths for multiple requests simultaneously, leading to incorrect path information being processed. As a result, the server may attempt to access the wrong path, causing errors such as "404 Not Found" or other application failures. This flaw can potentially lead to a denial of service, as legitimate resources become inaccessible due to the path mix-up.
π@cveNotify
A vulnerability was found in Undertow, where URL-encoded request paths can be mishandled during concurrent requests on the AJP listener. This issue arises because the same buffer is used to decode the paths for multiple requests simultaneously, leading to incorrect path information being processed. As a result, the server may attempt to access the wrong path, causing errors such as "404 Not Found" or other application failures. This flaw can potentially lead to a denial of service, as legitimate resources become inaccessible due to the path mix-up.
π@cveNotify
π¨ CVE-2024-4467
A flaw was found in the QEMU disk image utility (qemu-img) 'info' command. A specially crafted image file containing a `json:{}` value describing block devices in QMP could cause the qemu-img process on the host to consume large amounts of memory or CPU time, leading to denial of service or read/write to an existing external file.
π@cveNotify
A flaw was found in the QEMU disk image utility (qemu-img) 'info' command. A specially crafted image file containing a `json:{}` value describing block devices in QMP could cause the qemu-img process on the host to consume large amounts of memory or CPU time, leading to denial of service or read/write to an existing external file.
π@cveNotify
π¨ CVE-2024-7557
A vulnerability was found in OpenShift AI that allows for authentication bypass and privilege escalation across models within the same namespace. When deploying AI models, the UI provides the option to protect models with authentication. However, credentials from one model can be used to access other models and APIs within the same namespace. The exposed ServiceAccount tokens, visible in the UI, can be utilized with oc --token={token} to exploit the elevated view privileges associated with the ServiceAccount, leading to unauthorized access to additional resources.
π@cveNotify
A vulnerability was found in OpenShift AI that allows for authentication bypass and privilege escalation across models within the same namespace. When deploying AI models, the UI provides the option to protect models with authentication. However, credentials from one model can be used to access other models and APIs within the same namespace. The exposed ServiceAccount tokens, visible in the UI, can be utilized with oc --token={token} to exploit the elevated view privileges associated with the ServiceAccount, leading to unauthorized access to additional resources.
π@cveNotify
π¨ CVE-2024-9779
A flaw was found in Open Cluster Management (OCM) when a user has access to the worker nodes which contain the cluster-manager or klusterlet deployments. The cluster-manager deployment uses a service account with the same name "cluster-manager" which is bound to a ClusterRole also named "cluster-manager", which includes the permission to create Pod resources. If this deployment runs a pod on an attacker-controlled node, the attacker can obtain the cluster-manager's token and steal any service account token by creating and mounting the target service account to control the whole cluster.
π@cveNotify
A flaw was found in Open Cluster Management (OCM) when a user has access to the worker nodes which contain the cluster-manager or klusterlet deployments. The cluster-manager deployment uses a service account with the same name "cluster-manager" which is bound to a ClusterRole also named "cluster-manager", which includes the permission to create Pod resources. If this deployment runs a pod on an attacker-controlled node, the attacker can obtain the cluster-manager's token and steal any service account token by creating and mounting the target service account to control the whole cluster.
π@cveNotify
π¨ CVE-2025-29628
A Gardyn Azure IoT Hub connection string is downloaded over an insecure HTTP connection in Gardyn Home Kit firmware before master.619, Home Kit Mobile Application before 2.11.0, and Home Kit Cloud API before 2.12.2026 leaving the string vulnerable to interception and modification through a Man-in-the-Middle attack. This may result in the attacker capturing device credentials or taking control of vulnerable home kits.
π@cveNotify
A Gardyn Azure IoT Hub connection string is downloaded over an insecure HTTP connection in Gardyn Home Kit firmware before master.619, Home Kit Mobile Application before 2.11.0, and Home Kit Cloud API before 2.12.2026 leaving the string vulnerable to interception and modification through a Man-in-the-Middle attack. This may result in the attacker capturing device credentials or taking control of vulnerable home kits.
π@cveNotify
π¨ CVE-2025-29629
Gardyn Home Kit firmware before master.619, Home Kit Mobile Application before 2.11.0, and Home Kit Cloud API before 2.12.2026 use weak default credentials for secure shell access. This may result in attackers gaining access to exposed Gardyn Home Kits.
π@cveNotify
Gardyn Home Kit firmware before master.619, Home Kit Mobile Application before 2.11.0, and Home Kit Cloud API before 2.12.2026 use weak default credentials for secure shell access. This may result in attackers gaining access to exposed Gardyn Home Kits.
π@cveNotify
π¨ CVE-2025-29630
Gardyn Home Kit Firmware allows a remote attacker with the corresponding ssh private key to achieve remote root access.
π@cveNotify
Gardyn Home Kit Firmware allows a remote attacker with the corresponding ssh private key to achieve remote root access.
π@cveNotify
π¨ CVE-2025-29631
Gardyn Home Kit firmware before master.619, Home Kit Mobile Application before 2.11.0, and Home Kit Cloud API before 2.12.2026 allow command injection through vulnerable methods that do not sanitize input before passing content to the operating system for execution. The vulnerability may allow an attacker to execute arbitrary operating system commands on a target Home Kit.
π@cveNotify
Gardyn Home Kit firmware before master.619, Home Kit Mobile Application before 2.11.0, and Home Kit Cloud API before 2.12.2026 allow command injection through vulnerable methods that do not sanitize input before passing content to the operating system for execution. The vulnerability may allow an attacker to execute arbitrary operating system commands on a target Home Kit.
π@cveNotify
π¨ CVE-2025-69674
Buffer Overflow vulnerability in CDATA FD614GS3-R850 V3.2.7_P161006 (Build.0333.250211) allows an attacker to execute arbitrary code via the node_mac, node_opt, opt_param, and domainblk parameters of the mesh_node_config and domiainblk_config modules
π@cveNotify
Buffer Overflow vulnerability in CDATA FD614GS3-R850 V3.2.7_P161006 (Build.0333.250211) allows an attacker to execute arbitrary code via the node_mac, node_opt, opt_param, and domainblk parameters of the mesh_node_config and domiainblk_config modules
π@cveNotify
Gist
# SecBuffer Overflow & CSRF in CDATA FD614GS3-R850.md
GitHub Gist: instantly share code, notes, and snippets.
π¨ CVE-2025-8556
A flaw was found in CIRCL's implementation of the FourQ elliptic curve. This vulnerability allows an attacker to compromise session security via low-order point injection and incorrect point validation during Diffie-Hellman key exchange.
π@cveNotify
A flaw was found in CIRCL's implementation of the FourQ elliptic curve. This vulnerability allows an attacker to compromise session security via low-order point injection and incorrect point validation during Diffie-Hellman key exchange.
π@cveNotify
π¨ CVE-2025-13453
A potential vulnerability was reported in some ThinkPlus USB drives that could allow a user with physical access to read data stored on the drive.
π@cveNotify
A potential vulnerability was reported in some ThinkPlus USB drives that could allow a user with physical access to read data stored on the drive.
π@cveNotify
π¨ CVE-2025-13454
A potential vulnerability was reported in ThinkPlus configuration software that could allow a local authenticated user to gain access to sensitive device information.
π@cveNotify
A potential vulnerability was reported in ThinkPlus configuration software that could allow a local authenticated user to gain access to sensitive device information.
π@cveNotify
π¨ CVE-2025-15467
Issue summary: Parsing CMS AuthEnvelopedData or EnvelopedData message with
maliciously crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS (Auth)EnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME (Auth)EnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue.
π@cveNotify
Issue summary: Parsing CMS AuthEnvelopedData or EnvelopedData message with
maliciously crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS (Auth)EnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME (Auth)EnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue.
π@cveNotify
GitHub
Correct handling of AEAD-encrypted CMS with inadmissibly long IV Β· openssl/openssl@2c8f0e5
Fixes CVE-2025-15467
Reviewed-by: SaΕ‘a NedvΔdickΓ½ <sashan@openssl.org>
Reviewed-by: Norbert Pocs <norbertp@openssl.org>
Reviewed-by: Eugene Syromiatnikov <esyr@o...
Reviewed-by: SaΕ‘a NedvΔdickΓ½ <sashan@openssl.org>
Reviewed-by: Norbert Pocs <norbertp@openssl.org>
Reviewed-by: Eugene Syromiatnikov <esyr@o...