🚨 CVE-2024-0553
A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.
🎖@cveNotify
A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.
🎖@cveNotify
🚨 CVE-2024-0914
A timing side-channel vulnerability has been discovered in the opencryptoki package while processing RSA PKCS#1 v1.5 padded ciphertexts. This flaw could potentially enable unauthorized RSA ciphertext decryption or signing, even without access to the corresponding private key.
🎖@cveNotify
A timing side-channel vulnerability has been discovered in the opencryptoki package while processing RSA PKCS#1 v1.5 padded ciphertexts. This flaw could potentially enable unauthorized RSA ciphertext decryption or signing, even without access to the corresponding private key.
🎖@cveNotify
🚨 CVE-2023-7216
A path traversal vulnerability was found in the CPIO utility. This issue could allow a remote unauthenticated attacker to trick a user into opening a specially crafted archive. During the extraction process, the archiver could follow symlinks outside of the intended directory, which allows files to be written in arbitrary directories through symlinks.
🎖@cveNotify
A path traversal vulnerability was found in the CPIO utility. This issue could allow a remote unauthenticated attacker to trick a user into opening a specially crafted archive. During the extraction process, the archiver could follow symlinks outside of the intended directory, which allows files to be written in arbitrary directories through symlinks.
🎖@cveNotify
🚨 CVE-2023-50781
A flaw was found in m2crypto. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data.
🎖@cveNotify
A flaw was found in m2crypto. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data.
🎖@cveNotify
🚨 CVE-2023-50782
A flaw was found in the python-cryptography package. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data.
🎖@cveNotify
A flaw was found in the python-cryptography package. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data.
🎖@cveNotify
🚨 CVE-2024-1709
ConnectWise ScreenConnect 23.9.7 and prior are affected by an Authentication Bypass Using an Alternate Path or Channel
vulnerability, which may allow an attacker direct access to confidential information or
critical systems.
🎖@cveNotify
ConnectWise ScreenConnect 23.9.7 and prior are affected by an Authentication Bypass Using an Alternate Path or Channel
vulnerability, which may allow an attacker direct access to confidential information or
critical systems.
🎖@cveNotify
GitHub
Unauthenticated RCE exploit module for ConnectWise ScreenConnect (CVE-2024-1709) by sfewer-r7 · Pull Request #18870 · rapid7/metasploit…
This (draft) pull request adds an exploit module for the recent authentication bypass vulnerability in ConnectWise ScreenConnect. (No CVE has been assigned at this time.)
Vendor Advisory: https://...
Vendor Advisory: https://...
🚨 CVE-2024-1212
Unauthenticated remote attackers can access the system through the LoadMaster management interface, enabling arbitrary system command execution.
🎖@cveNotify
Unauthenticated remote attackers can access the system through the LoadMaster management interface, enabling arbitrary system command execution.
🎖@cveNotify
Free Load Balancer
Free Load Balancer for IT Admins, Software Developers, DevOps and Open Source Users - Free Load Balancer
A free version of Kemp's popular VLM application load balancer is now available for unlimited use, making it easy for IT developers and open source technology users to benefit from all the features of a full commercial-grade product at no cost.
🚨 CVE-2024-1485
A flaw was found in the decompression function of registry-support. This issue can be triggered if an unauthenticated remote attacker tricks a user into parsing a devfile which uses the `parent` or `plugin` keywords. This could download a malicious archive and cause the cleanup process to overwrite or delete files outside of the archive, which should not be allowed.
🎖@cveNotify
A flaw was found in the decompression function of registry-support. This issue can be triggered if an unauthenticated remote attacker tricks a user into parsing a devfile which uses the `parent` or `plugin` keywords. This could download a malicious archive and cause the cleanup process to overwrite or delete files outside of the archive, which should not be allowed.
🎖@cveNotify
🚨 CVE-2024-2236
A timing-based side-channel flaw was found in libgcrypt's RSA implementation. This issue may allow a remote attacker to initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts.
🎖@cveNotify
A timing-based side-channel flaw was found in libgcrypt's RSA implementation. This issue may allow a remote attacker to initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts.
🎖@cveNotify
🚨 CVE-2024-1300
A vulnerability in the Eclipse Vert.x toolkit causes a memory leak in TCP servers configured with TLS and SNI support. When processing an unknown SNI server name assigned the default certificate instead of a mapped certificate, the SSL context is erroneously cached in the server name map, leading to memory exhaustion. This flaw allows attackers to send TLS client hello messages with fake server names, triggering a JVM out-of-memory error.
🎖@cveNotify
A vulnerability in the Eclipse Vert.x toolkit causes a memory leak in TCP servers configured with TLS and SNI support. When processing an unknown SNI server name assigned the default certificate instead of a mapped certificate, the SSL context is erroneously cached in the server name map, leading to memory exhaustion. This flaw allows attackers to send TLS client hello messages with fake server names, triggering a JVM out-of-memory error.
🎖@cveNotify
🚨 CVE-2024-3296
A timing-based side-channel flaw exists in the rust-openssl package, which could be sufficient to recover a plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages for decryption. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode.
🎖@cveNotify
A timing-based side-channel flaw exists in the rust-openssl package, which could be sufficient to recover a plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages for decryption. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode.
🎖@cveNotify
🚨 CVE-2024-1657
A flaw was found in the ansible automation platform. An insecure WebSocket connection was being used in installation from the Ansible rulebook EDA server. An attacker that has access to any machine in the CIDR block could download all rulebook data from the WebSocket, resulting in loss of confidentiality and integrity of the system.
🎖@cveNotify
A flaw was found in the ansible automation platform. An insecure WebSocket connection was being used in installation from the Ansible rulebook EDA server. An attacker that has access to any machine in the CIDR block could download all rulebook data from the WebSocket, resulting in loss of confidentiality and integrity of the system.
🎖@cveNotify
🚨 CVE-2024-2467
A timing-based side-channel flaw exists in the perl-Crypt-OpenSSL-RSA package, which could be sufficient to recover plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode.
🎖@cveNotify
A timing-based side-channel flaw exists in the perl-Crypt-OpenSSL-RSA package, which could be sufficient to recover plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode.
🎖@cveNotify
🚨 CVE-2026-25899
Fiber is an Express inspired web framework written in Go. In versions on the v3 branch prior to 3.1.0, the use of the `fiber_flash` cookie can force an unbounded allocation on any server. A crafted 10-character cookie value triggers an attempt to allocate up to 85GB of memory via unvalidated msgpack deserialization. No authentication is required. Every GoFiber v3 endpoint is affected regardless of whether the application uses flash messages. Version 3.1.0 fixes the issue.
🎖@cveNotify
Fiber is an Express inspired web framework written in Go. In versions on the v3 branch prior to 3.1.0, the use of the `fiber_flash` cookie can force an unbounded allocation on any server. A crafted 10-character cookie value triggers an attempt to allocate up to 85GB of memory via unvalidated msgpack deserialization. No authentication is required. Every GoFiber v3 endpoint is affected regardless of whether the application uses flash messages. Version 3.1.0 fixes the issue.
🎖@cveNotify
GitHub
Release v3.1.0 · gofiber/fiber
🚀 New
expand middleware context helpers (#4079)
app := fiber.New(fiber.Config{
PassLocalsToContext: true, // default: false
})
// Works for requestid, csrf, session, basicauth, keyauth middl...
expand middleware context helpers (#4079)
app := fiber.New(fiber.Config{
PassLocalsToContext: true, // default: false
})
// Works for requestid, csrf, session, basicauth, keyauth middl...
🚨 CVE-2026-27117
bit7z is a cross-platform C++ static library that allows the compression/extraction of archive files. Prior to version 4.0.11, a path traversal vulnerability ("Zip Slip") exists in bit7z's archive extraction functionality. The library does not adequately validate file paths contained in archive entries, allowing files to be written outside the intended extraction directory through three distinct mechanisms: relative path traversal, absolute path traversal, and symbolic link traversal. An attacker can exploit this by providing a malicious archive to any application that uses bit7z to extract untrusted archives. Successful exploitation results in arbitrary file write with the privileges of the process performing the extraction. This could lead to overwriting of application binaries, configuration files, or other sensitive data. The vulnerability does not directly enable reading of file contents; the confidentiality impact is limited to the calling application's own behavior after extraction. However, applications that subsequently serve or display extracted files may face secondary confidentiality risks from attacker-created symlinks. Fixes have been released in version 4.0.11. If upgrading is not immediately possible, users can mitigate the vulnerability by validating each entry's destination path before writing. Other mitigations include running extraction with least privilege and extracting untrusted archives in a sandboxed directory.
🎖@cveNotify
bit7z is a cross-platform C++ static library that allows the compression/extraction of archive files. Prior to version 4.0.11, a path traversal vulnerability ("Zip Slip") exists in bit7z's archive extraction functionality. The library does not adequately validate file paths contained in archive entries, allowing files to be written outside the intended extraction directory through three distinct mechanisms: relative path traversal, absolute path traversal, and symbolic link traversal. An attacker can exploit this by providing a malicious archive to any application that uses bit7z to extract untrusted archives. Successful exploitation results in arbitrary file write with the privileges of the process performing the extraction. This could lead to overwriting of application binaries, configuration files, or other sensitive data. The vulnerability does not directly enable reading of file contents; the confidentiality impact is limited to the calling application's own behavior after extraction. However, applications that subsequently serve or display extracted files may face secondary confidentiality risks from attacker-created symlinks. Fixes have been released in version 4.0.11. If upgrading is not immediately possible, users can mitigate the vulnerability by validating each entry's destination path before writing. Other mitigations include running extraction with least privilege and extracting untrusted archives in a sandboxed directory.
🎖@cveNotify
GitHub
Apply path sanitization also when restoring symbolic links · rikyoz/bit7z@31763da
A C++ static library offering a clean and simple interface to the 7-zip shared libraries. - Apply path sanitization also when restoring symbolic links · rikyoz/bit7z@31763da
🚨 CVE-2026-27593
Statmatic is a Laravel and Git powered content management system (CMS). Prior to versions 6.3.3 and 5.73.10, an attacker may leverage a vulnerability in the password reset feature to capture a user's token and reset the password on their behalf. The attacker must know the email address of a valid account on the site, and the actual user must blindly click the link in their email even though they didn't request the reset. This has been fixed in 6.3.3 and 5.73.10.
🎖@cveNotify
Statmatic is a Laravel and Git powered content management system (CMS). Prior to versions 6.3.3 and 5.73.10, an attacker may leverage a vulnerability in the password reset feature to capture a user's token and reset the password on their behalf. The attacker must know the email address of a valid account on the site, and the actual user must blindly click the link in their email even though they didn't request the reset. This has been fixed in 6.3.3 and 5.73.10.
🎖@cveNotify
GitHub
wip · statamic/cms@6fdd033
The core Laravel CMS Composer package. Contribute to statamic/cms development by creating an account on GitHub.
🚨 CVE-2026-3145
A flaw has been found in libvips up to 8.18.0. The affected element is the function vips_foreign_load_matrix_file_is_a/vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. Executing a manipulation can lead to memory corruption. The attack needs to be launched locally. This patch is called d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. A patch should be applied to remediate this issue.
🎖@cveNotify
A flaw has been found in libvips up to 8.18.0. The affected element is the function vips_foreign_load_matrix_file_is_a/vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. Executing a manipulation can lead to memory corruption. The attack needs to be launched locally. This patch is called d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. A patch should be applied to remediate this issue.
🎖@cveNotify
GitHub
GitHub - libvips/libvips: A fast image processing library with low memory needs.
A fast image processing library with low memory needs. - libvips/libvips
🚨 CVE-2026-3146
A vulnerability has been found in libvips up to 8.18.0. The impacted element is the function vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. The manipulation leads to null pointer dereference. The attack needs to be performed locally. The identifier of the patch is d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. To fix this issue, it is recommended to deploy a patch.
🎖@cveNotify
A vulnerability has been found in libvips up to 8.18.0. The impacted element is the function vips_foreign_load_matrix_header of the file libvips/foreign/matrixload.c. The manipulation leads to null pointer dereference. The attack needs to be performed locally. The identifier of the patch is d4ce337c76bff1b278d7085c3c4f4725e3aa6ece. To fix this issue, it is recommended to deploy a patch.
🎖@cveNotify
GitHub
GitHub - libvips/libvips: A fast image processing library with low memory needs.
A fast image processing library with low memory needs. - libvips/libvips
🚨 CVE-2026-3147
A vulnerability was found in libvips up to 8.18.0. This affects the function vips_foreign_load_csv_build of the file libvips/foreign/csvload.c. The manipulation results in heap-based buffer overflow. The attack requires a local approach. The exploit has been made public and could be used. The patch is identified as b3ab458a25e0e261cbd1788474bbc763f7435780. It is advisable to implement a patch to correct this issue.
🎖@cveNotify
A vulnerability was found in libvips up to 8.18.0. This affects the function vips_foreign_load_csv_build of the file libvips/foreign/csvload.c. The manipulation results in heap-based buffer overflow. The attack requires a local approach. The exploit has been made public and could be used. The patch is identified as b3ab458a25e0e261cbd1788474bbc763f7435780. It is advisable to implement a patch to correct this issue.
🎖@cveNotify
GitHub
GitHub - libvips/libvips: A fast image processing library with low memory needs.
A fast image processing library with low memory needs. - libvips/libvips
🚨 CVE-2022-20775
A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain elevated privileges.
This vulnerability is due to improper access controls on commands within the application CLI. An attacker could exploit this vulnerability by running a maliciously crafted command on the application CLI. A successful exploit could allow the attacker to execute arbitrary commands as the root user.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sd-wan-priv-E6e8tEdF
🎖@cveNotify
A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain elevated privileges.
This vulnerability is due to improper access controls on commands within the application CLI. An attacker could exploit this vulnerability by running a maliciously crafted command on the application CLI. A successful exploit could allow the attacker to execute arbitrary commands as the root user.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sd-wan-priv-E6e8tEdF
🎖@cveNotify
Cisco
Cisco Security Advisory: Cisco SD-WAN Software Privilege Escalation Vulnerabilities
Multiple vulnerabilities in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain elevated privileges.
These vulnerabilities are due to improper access controls on commands within the application CLI. An attacker could exploit…
These vulnerabilities are due to improper access controls on commands within the application CLI. An attacker could exploit…
🚨 CVE-2024-4418
A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it.
🎖@cveNotify
A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it.
🎖@cveNotify