🚨 CVE-2022-2421
Due to improper type validation in attachment parsing the Socket.io js library, it is possible to overwrite the _placeholder object which allows an attacker to place references to functions at arbitrary places in the resulting query object.

🎖@cveNotify

🚨 CVE-2026-1293
The Yoast SEO – Advanced SEO with real-time guidance and built-in AI plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the the `yoast-schema` block attribute in all versions up to, and including, 26.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

🎖@cveNotify

🚨 CVE-2026-2016
A security vulnerability has been detected in happyfish100 libfastcommon up to 1.0.84. Affected by this vulnerability is the function base64_decode of the file src/base64.c. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. The identifier of the patch is 82f66af3e252e3e137dba0c3891570f085e79adf. Applying a patch is the recommended action to fix this issue.

🎖@cveNotify

🚨 CVE-2026-2017
A vulnerability was detected in IP-COM W30AP up to 1.0.0.11(1340). Affected by this issue is the function R7WebsSecurityHandler of the file /goform/wx3auth of the component POST Request Handler. The manipulation of the argument data results in stack-based buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2026-24765
PHPUnit is a testing framework for PHP. A vulnerability has been discovered in versions prior to 12.5.8, 11.5.50, 10.5.62, 9.6.33, and 8.5.52 involving unsafe deserialization of code coverage data in PHPT test execution. The vulnerability exists in the `cleanupForCoverage()` method, which deserializes code coverage files without validation, potentially allowing remote code execution if malicious `.coverage` files are present prior to the execution of the PHPT test. The vulnerability occurs when a `.coverage` file, which should not exist before test execution, is deserialized without the `allowed_classes` parameter restriction. An attacker with local file write access can place a malicious serialized object with a `__wakeup()` method into the file system, leading to arbitrary code execution during test runs with code coverage instrumentation enabled. This vulnerability requires local file write access to the location where PHPUnit stores or expects code coverage files for PHPT tests. This can occur through CI/CD pipeline attacks, the local development environment, and/or compromised dependencies. Rather than just silently sanitizing the input via `['allowed_classes' => false]`, the maintainer has chosen to make the anomalous state explicit by treating pre-existing `.coverage` files for PHPT tests as an error condition. Starting in versions in versions 12.5.8, 11.5.50, 10.5.62, 9.6.33, when a `.coverage` file is detected for a PHPT test prior to execution, PHPUnit will emit a clear error message identifying the anomalous state. Organizations can reduce the effective risk of this vulnerability through proper CI/CD configuration, including ephemeral runners, code review enforcement, branch protection, artifact isolation, and access control.

🎖@cveNotify

🚨 CVE-2026-2018
A flaw has been found in itsourcecode School Management System 1.0. This affects an unknown part of the file /ramonsys/settings/controller.php. This manipulation of the argument ID causes sql injection. It is possible to initiate the attack remotely. The exploit has been published and may be used.

🎖@cveNotify

🚨 CVE-2026-2054
A security flaw has been discovered in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. Impacted is an unknown function of the component Wifi Setting Handler. Performing a manipulation results in information disclosure. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

🎖@cveNotify

🚨 CVE-2026-2055
A weakness has been identified in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The affected element is an unknown function of the component DHCP Client Information Handler. Executing a manipulation can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

🎖@cveNotify

🚨 CVE-2023-53604
In the Linux kernel, the following vulnerability has been resolved:

dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path

Otherwise the journal_io_cache will leak if dm_register_target() fails.

🎖@cveNotify

🚨 CVE-2022-50535
In the Linux kernel, the following vulnerability has been resolved:

drm/amd/display: Fix potential null-deref in dm_resume

[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null

[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped.

🎖@cveNotify

🚨 CVE-2022-50554
In the Linux kernel, the following vulnerability has been resolved:

blk-mq: avoid double ->queue_rq() because of early timeout

David Jeffery found one double ->queue_rq() issue, so far it can
be triggered in VM use case because of long vmexit latency or preempt
latency of vCPU pthread or long page fault in vCPU pthread, then block
IO req could be timed out before queuing the request to hardware but after
calling blk_mq_start_request() during ->queue_rq(), then timeout handler
may handle it by requeue, then double ->queue_rq() is caused, and kernel
panic.

So far, it is driver's responsibility to cover the race between timeout
and completion, so it seems supposed to be solved in driver in theory,
given driver has enough knowledge.

But it is really one common problem, lots of driver could have similar
issue, and could be hard to fix all affected drivers, even it isn't easy
for driver to handle the race. So David suggests this patch by draining
in-progress ->queue_rq() for solving this issue.

🎖@cveNotify

🚨 CVE-2023-53596
In the Linux kernel, the following vulnerability has been resolved:

drivers: base: Free devm resources when unregistering a device

In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.

This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.

We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.

This is effectively the same change than commit 2f8d16a996da ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddeaca ("driver core: free devres in device_release") over
memory leaks concerns.

This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds.

🎖@cveNotify

🚨 CVE-2023-53597
In the Linux kernel, the following vulnerability has been resolved:

cifs: fix mid leak during reconnection after timeout threshold

When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.

This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.

This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.

Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.

Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.

🎖@cveNotify

🚨 CVE-2023-53598
In the Linux kernel, the following vulnerability has been resolved:

bus: mhi: host: Range check CHDBOFF and ERDBOFF

If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device.

🎖@cveNotify

🚨 CVE-2025-49189
The HttpOnlyflag of the session cookie \"@@\" is set to false. Since this flag helps preventing access to cookies via client-side scripts, setting the flag to false can lead to a higher possibility of Cross-Side-Scripting attacks which target the stored cookies.

🎖@cveNotify

🚨 CVE-2025-49192
The web application is vulnerable to clickjacking attacks. The site can be embedded into another frame, allowing an attacker to trick a user into clicking on something different from what the user perceives. This could potentially reveal confidential information or allow others to take control of their computer while clicking on seemingly innocuous objects.

🎖@cveNotify

🚨 CVE-2025-4661
A path transversal vulnerability in
Brocade Fabric OS 9.1.0 through 9.2.2 could allow a local admin user to
gain access to files outside the intended directory potentially leading
to the disclosure of sensitive information.


Note: Admin level privilege is required on the switch in order to exploit

🎖@cveNotify

🚨 CVE-2025-1709
Several credentials for the local PostgreSQL database are stored in plain text (partially base64 encoded).

🎖@cveNotify

🚨 CVE-2025-1710
The maxView Storage Manager does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

🎖@cveNotify

🚨 CVE-2025-27447
The web application is susceptible to cross-site-scripting attacks. An attacker can create a prepared URL, which injects JavaScript code into the website. The code is executed in the victim’s browser when an authenticated administrator clicks the link.

🎖@cveNotify

🚨 CVE-2023-51951
SQL Injection vulnerability in Stock Management System 1.0 allows a remote attacker to execute arbitrary code via the id parameter in the manage_bo.php file.

🎖@cveNotify