🚨 CVE-2025-54944
An unrestricted upload of file with dangerous type vulnerability in SUNNET Corporate Training Management System before 10.11 allows remote attackers to write malicious code in a specific file, which may lead to arbitrary code execution.
🎖@cveNotify
An unrestricted upload of file with dangerous type vulnerability in SUNNET Corporate Training Management System before 10.11 allows remote attackers to write malicious code in a specific file, which may lead to arbitrary code execution.
🎖@cveNotify
zuso.ai
ZUSO Generation 如梭世代
為台灣本土專業之資訊安全服務業者，服務團隊具備超過 10 年以上駭客攻擊手法及豐富威脅分析經歷，專為企業組織提供客製化資安服務解決方案。
🚨 CVE-2025-54945
An external control of file name or path vulnerability in SUNNET Corporate Training Management System before 10.11 allows remote attackers to execute arbitrary system commands via a malicious file by controlling the destination file path.
🎖@cveNotify
An external control of file name or path vulnerability in SUNNET Corporate Training Management System before 10.11 allows remote attackers to execute arbitrary system commands via a malicious file by controlling the destination file path.
🎖@cveNotify
zuso.ai
ZUSO Generation 如梭世代
為台灣本土專業之資訊安全服務業者，服務團隊具備超過 10 年以上駭客攻擊手法及豐富威脅分析經歷，專為企業組織提供客製化資安服務解決方案。
🚨 CVE-2025-54946
A SQL injection vulnerability in SUNNET Corporate Training Management System before 10.11 allows remote attackers to execute arbitrary SQL commands.
🎖@cveNotify
A SQL injection vulnerability in SUNNET Corporate Training Management System before 10.11 allows remote attackers to execute arbitrary SQL commands.
🎖@cveNotify
zuso.ai
ZUSO Generation 如梭世代
為台灣本土專業之資訊安全服務業者，服務團隊具備超過 10 年以上駭客攻擊手法及豐富威脅分析經歷，專為企業組織提供客製化資安服務解決方案。
🚨 CVE-2025-31342
An unrestricted upload of file with dangerous type vulnerability in the upload file function of Galaxy Software Services Corporation Vitals ESP Forum Module through 1.3 version allows remote authenticated users to execute arbitrary system commands via a malicious file.
🎖@cveNotify
An unrestricted upload of file with dangerous type vulnerability in the upload file function of Galaxy Software Services Corporation Vitals ESP Forum Module through 1.3 version allows remote authenticated users to execute arbitrary system commands via a malicious file.
🎖@cveNotify
zuso.ai
ZUSO Generation 如梭世代
為台灣本土專業之資訊安全服務業者，服務團隊具備超過 10 年以上駭客攻擊手法及豐富威脅分析經歷，專為企業組織提供客製化資安服務解決方案。
🚨 CVE-2025-12899
A flaw in Zephyr’s network stack allows an IPv4 packet containing ICMP type 128 to be misclassified as an ICMPv6 Echo Request. This results in an out-of-bounds memory read and creates a potential information-leak vulnerability in the networking subsystem.
🎖@cveNotify
A flaw in Zephyr’s network stack allows an IPv4 packet containing ICMP type 128 to be misclassified as an ICMPv6 Echo Request. This results in an out-of-bounds memory read and creates a potential information-leak vulnerability in the networking subsystem.
🎖@cveNotify
GitHub
net: icmp: Out of bound memory read
Zephyr network stack calls `icmpv6_handle_echo_request` on IPv4 packet with ICMP type 128 (Echo Request type for ICMPv6). This later leads to reinterpretation of IPv4 header as IPv6 header and enab...
🚨 CVE-2026-0805
An input neutralization vulnerability in the Backup Configuration component of Crafty Controller allows a remote, authenticated attacker to perform file tampering and remote code execution via path traversal.
🎖@cveNotify
An input neutralization vulnerability in the Backup Configuration component of Crafty Controller allows a remote, authenticated attacker to perform file tampering and remote code execution via path traversal.
🎖@cveNotify
🚨 CVE-2026-0963
An input neutralization vulnerability in the File Operations API Endpoint component of Crafty Controller allows a remote, authenticated attacker to perform file tampering and remote code execution via path traversal.
🎖@cveNotify
An input neutralization vulnerability in the File Operations API Endpoint component of Crafty Controller allows a remote, authenticated attacker to perform file tampering and remote code execution via path traversal.
🎖@cveNotify
🚨 CVE-2026-1680
Improper access control in the WCF endpoint in Edgemo (now owned by Danoffice IT) Local Admin Service 1.2.7.23180 on Windows allows a local user to escalate their privileges to local administrator via direct communication with the LocalAdminService.exe named pipe, bypassing client-side group membership restrictions.
🎖@cveNotify
Improper access control in the WCF endpoint in Edgemo (now owned by Danoffice IT) Local Admin Service 1.2.7.23180 on Windows allows a local user to escalate their privileges to local administrator via direct communication with the LocalAdminService.exe named pipe, bypassing client-side group membership restrictions.
🎖@cveNotify
Retest Security
Local Privilege Escalation Vulnerability found in "Local Admin Service" | Retest Security
🚨 CVE-2026-25210
In libexpat before 2.7.4, the doContent function does not properly determine the buffer size bufSize because there is no integer overflow check for tag buffer reallocation.
🎖@cveNotify
In libexpat before 2.7.4, the doContent function does not properly determine the buffer size bufSize because there is no integer overflow check for tag buffer reallocation.
🎖@cveNotify
GitHub
Improve determination of buffer size `bufSize` in function `doContent` by Smattr · Pull Request #1075 · libexpat/libexpat
Some tweaks spawned from the review of #1072.
🚨 CVE-2025-13919
Symantec Endpoint Protection, prior to 14.3 RU10 Patch 1, RU9 Patch 2, and RU8 Patch 3, may be susceptible to a COM Hijacking vulnerability, which is a type of issue whereby an attacker attempts to establish persistence and evade detection by hijacking COM references in the Windows Registry.
🎖@cveNotify
Symantec Endpoint Protection, prior to 14.3 RU10 Patch 1, RU9 Patch 2, and RU8 Patch 3, may be susceptible to a COM Hijacking vulnerability, which is a type of issue whereby an attacker attempts to establish persistence and evade detection by hijacking COM references in the Windows Registry.
🎖@cveNotify
🚨 CVE-2026-25211
Llama Stack (aka llama-stack) before 0.4.0rc3 does not censor the pgvector password in the initialization log.
🎖@cveNotify
Llama Stack (aka llama-stack) before 0.4.0rc3 does not censor the pgvector password in the initialization log.
🎖@cveNotify
GitHub
Comparing v0.4.0rc2...v0.4.0rc3 · llamastack/llama-stack
Composable building blocks to build LLM Apps. Contribute to llamastack/llama-stack development by creating an account on GitHub.
🚨 CVE-2025-1395
Generation of Error Message Containing Sensitive Information vulnerability in Codriapp Innovation and Software Technologies Inc. HeyGarson allows Fuzzing for application mapping.This issue affects HeyGarson: through 30012026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
Generation of Error Message Containing Sensitive Information vulnerability in Codriapp Innovation and Software Technologies Inc. HeyGarson allows Fuzzing for application mapping.This issue affects HeyGarson: through 30012026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
🎖@cveNotify
🚨 CVE-2026-21418
Dell Unity, version(s) 5.5.2 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges.
🎖@cveNotify
Dell Unity, version(s) 5.5.2 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges.
🎖@cveNotify
🚨 CVE-2026-22277
Dell UnityVSA, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges.
🎖@cveNotify
Dell UnityVSA, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges.
🎖@cveNotify
🚨 CVE-2024-26655
In the Linux kernel, the following vulnerability has been resolved:
Fix memory leak in posix_clock_open()
If the clk ops.open() function returns an error, we don't release the
pccontext we allocated for this clock.
Re-organize the code slightly to make it all more obvious.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Fix memory leak in posix_clock_open()
If the clk ops.open() function returns an error, we don't release the
pccontext we allocated for this clock.
Re-organize the code slightly to make it all more obvious.
🎖@cveNotify
🚨 CVE-2024-58097
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix RCU stall while reaping monitor destination ring
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix RCU stall while reaping monitor destination ring
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
🎖@cveNotify
🚨 CVE-2025-37926
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_session_rpc_open
A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_session_rpc_open
A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it.
🎖@cveNotify
🚨 CVE-2025-37945
In the Linux kernel, the following vulnerability has been resolved:
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed b
---truncated---
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed b
---truncated---
🎖@cveNotify
🚨 CVE-2025-26385
Johnson Controls Metasys component listed below have Improper Neutralization of Special Elements used in a Command (Command Injection) Vulnerability . Successful exploitation of this vulnerability could allow remote SQL execution This issue affects
* Metasys: Application and Data Server (ADS) installed with SQL Express deployed as part of the Metasys 14.1 and prior installation,
* Extended Application and Data Server (ADX) installed with SQL Express deployed as part of the Metasys 14.1 installation,
* LCS8500 or NAE8500 installed with SQL Express deployed as part of the Metasys installation Releases 12.0 through 14.1,
* System Configuration Tool (SCT) installed with SQL Express deployed as part of the SCT installation 17.1 and prior,
* Controller Configuration Tool (CCT) installed with SQL Express deployed as part of the CCT installation 17.0 and prior.
🎖@cveNotify
Johnson Controls Metasys component listed below have Improper Neutralization of Special Elements used in a Command (Command Injection) Vulnerability . Successful exploitation of this vulnerability could allow remote SQL execution This issue affects
* Metasys: Application and Data Server (ADS) installed with SQL Express deployed as part of the Metasys 14.1 and prior installation,
* Extended Application and Data Server (ADX) installed with SQL Express deployed as part of the Metasys 14.1 installation,
* LCS8500 or NAE8500 installed with SQL Express deployed as part of the Metasys installation Releases 12.0 through 14.1,
* System Configuration Tool (SCT) installed with SQL Express deployed as part of the SCT installation 17.1 and prior,
* Controller Configuration Tool (CCT) installed with SQL Express deployed as part of the CCT installation 17.0 and prior.
🎖@cveNotify
🚨 CVE-2026-0709
Some Hikvision Wireless Access Points are vulnerable to authenticated command execution due to insufficient input validation. Attackers with valid credentials can exploit this flaw by sending crafted packets containing malicious commands to affected devices, leading to arbitrary command execution.
🎖@cveNotify
Some Hikvision Wireless Access Points are vulnerable to authenticated command execution due to insufficient input validation. Attackers with valid credentials can exploit this flaw by sending crafted packets containing malicious commands to affected devices, leading to arbitrary command execution.
🎖@cveNotify
🚨 CVE-2026-22623
Due to insufficient input parameter validation on the interface, authenticated users of certain HIKSEMI NAS products can execute arbitrary commands on the device by crafting specific messages.
🎖@cveNotify
Due to insufficient input parameter validation on the interface, authenticated users of certain HIKSEMI NAS products can execute arbitrary commands on the device by crafting specific messages.
🎖@cveNotify