🚨 CVE-2025-39683
In the Linux kernel, the following vulnerability has been resolved:

tracing: Limit access to parser->buffer when trace_get_user failed

When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:

BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165

CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0

The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.

🎖@cveNotify

🚨 CVE-2023-4911
A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.

🎖@cveNotify

🚨 CVE-2025-38352
In the Linux kernel, the following vulnerability has been resolved:

posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()

If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().

If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.

Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.

This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.

🎖@cveNotify

🚨 CVE-2025-61662
A Use-After-Free vulnerability has been discovered in GRUB's gettext module. This flaw stems from a programming error where the gettext command remains registered in memory after its module is unloaded. An attacker can exploit this condition by invoking the orphaned command, causing the application to access a memory location that is no longer valid. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded.

🎖@cveNotify

🚨 CVE-2025-13225
Tanium addressed an arbitrary file deletion vulnerability in TanOS.

🎖@cveNotify

🚨 CVE-2025-63220
The Sound4 FIRST web-based management interface is vulnerable to Remote Code Execution (RCE) via a malicious firmware update package. The update mechanism fails to validate the integrity of manual.sh, allowing an attacker to inject arbitrary commands by modifying this script and repackaging the firmware.

🎖@cveNotify

🚨 CVE-2025-13442
A security vulnerability has been detected in UTT 进取 750W up to 3.2.2-191225. Affected by this vulnerability is the function system of the file /goform/formPdbUpConfig. Such manipulation of the argument policyNames leads to command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2024-42508
This vulnerability could be exploited, leading to unauthorized disclosure of information to authenticated users.

🎖@cveNotify

🚨 CVE-2025-38723
In the Linux kernel, the following vulnerability has been resolved:

LoongArch: BPF: Fix jump offset calculation in tailcall

The extra pass of bpf_int_jit_compile() skips JIT context initialization
which essentially skips offset calculation leaving out_offset = -1, so
the jmp_offset in emit_bpf_tail_call is calculated by

"#define jmp_offset (out_offset - (cur_offset))"

is a negative number, which is wrong. The final generated assembly are
as follow.

54: bgeu $a2, $t1, -8 # 0x0000004c
58: addi.d $a6, $s5, -1
5c: bltz $a6, -16 # 0x0000004c
60: alsl.d $t2, $a2, $a1, 0x3
64: ld.d $t2, $t2, 264
68: beq $t2, $zero, -28 # 0x0000004c

Before apply this patch, the follow test case will reveal soft lock issues.

cd tools/testing/selftests/bpf/
./test_progs --allow=tailcalls/tailcall_bpf2bpf_1

dmesg:
watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056]

🎖@cveNotify

🚨 CVE-2025-38724
In the Linux kernel, the following vulnerability has been resolved:

nfsd: handle get_client_locked() failure in nfsd4_setclientid_confirm()

Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.

Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.

In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().

🎖@cveNotify

🚨 CVE-2025-38725
In the Linux kernel, the following vulnerability has been resolved:

net: usb: asix_devices: add phy_mask for ax88772 mdio bus

Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.

🎖@cveNotify

🚨 CVE-2025-21063
Improper access control in Samsung Voice Recorder prior to version 21.5.73.12 in Android 15 and 21.5.81.40 in Android 16 allows physical attackers to access recording files on the lock screen.

🎖@cveNotify

🚨 CVE-2025-11651
A vulnerability has been found in UTT 进取 518G up to V3v3.2.7-210919-161313. This vulnerability affects the function sub_4247AC of the file /goform/formRemoteControl. The manipulation of the argument Profile leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2025-11652
A vulnerability was found in UTT 进取 518G up to V3v3.2.7-210919-161313. This issue affects some unknown processing of the file /goform/formTaskEdit_ap. The manipulation of the argument txtMin2 results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

🎖@cveNotify

🚨 CVE-2023-2003
Embedded malicious code vulnerability in Vision1210, in the build 5 of operating system version 4.3, which could allow a remote attacker to store base64-encoded malicious code in the device's data tables via the PCOM protocol, which can then be retrieved by a client and executed on the device.

🎖@cveNotify

🚨 CVE-2024-2904
Cross-Site Request Forgery (CSRF) vulnerability in Extend Themes Calliope.This issue affects Calliope: from n/a through 1.0.33.

🎖@cveNotify

🚨 CVE-2024-30201
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Xylus Themes WordPress Importer allows Reflected XSS.This issue affects WordPress Importer: from n/a through 1.0.4.

🎖@cveNotify

🚨 CVE-2024-29796
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Hot Themes Hot Random Image allows Stored XSS.This issue affects Hot Random Image: from n/a through 1.8.1.

🎖@cveNotify

🚨 CVE-2024-29886
Serverpod is an app and web server, built for the Flutter and Dart ecosystem. An issue was identified with the old password hash algorithm that made it susceptible to rainbow attacks if the database was compromised. This vulnerability is fixed by 1.2.6.

🎖@cveNotify

🚨 CVE-2024-29888
Saleor is an e-commerce platform that serves high-volume companies. When using `Pickup: Local stock only` click-and-collect as a delivery method in specific conditions the customer could overwrite the warehouse address with its own, which exposes its address as click-and-collect address. This issue has been patched in versions: `3.14.61`, `3.15.37`, `3.16.34`, `3.17.32`, `3.18.28`, `3.19.15`.

🎖@cveNotify

🚨 CVE-2024-34670
Use of implicit intent for sensitive communication in Sound Assistant prior to version 6.1.0.9 allows local attackers to get sensitive information.

🎖@cveNotify