🚨 CVE-2025-37164
A remote code execution issue exists in HPE OneView.

🎖@cveNotify

🚨 CVE-2019-25295
The WP Cost Estimation plugin for WordPress is vulnerable to Upload Directory Traversal in versions before 9.660 via the uploadFormFiles function. This allows attackers to overwrite any file with a whitelisted type on an affected site.

🎖@cveNotify

🚨 CVE-2026-21879
Kanboard is project management software focused on Kanban methodology. Versions 1.2.48 and below are vulnerable to an Open Redirect attack that allows malicious actors to redirect authenticated users to attacker-controlled websites. By crafting URLs such as //evil.com, attackers can bypass the filter_var($url, FILTER_VALIDATE_URL) validation check. This vulnerability could be exploited to conduct phishing attacks, steal user credentials, or distribute malware. The issue is fixed in version 1.2.49.

🎖@cveNotify

🚨 CVE-2026-21880
Kanboard is project management software focused on Kanban methodology. Versions 1.2.48 and below have an LDAP Injection vulnerability in the LDAP authentication mechanism. User-supplied input is directly substituted into LDAP search filters without proper sanitization, allowing attackers to enumerate all LDAP users, discover sensitive user attributes, and perform targeted attacks against specific accounts. This issue is fixed in version 1.2.49.

🎖@cveNotify

🚨 CVE-2025-14874
A flaw was found in Nodemailer. This vulnerability allows a denial of service (DoS) via a crafted email address header that triggers infinite recursion in the address parser.

🎖@cveNotify

🚨 CVE-2019-25296
The WP Cost Estimation plugin for WordPress is vulnerable to arbitrary file uploads and deletion due to missing file type validation in the lfb_upload_form and lfb_removeFile AJAX actions in versions up to, and including, 9.642. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected sites server which may make remote code execution possible. Additionally, the attacker can also delete files on the server such as database configuration files, subsequently uploading their own database files.

🎖@cveNotify

🚨 CVE-2025-12640
The Folders – Unlimited Folders to Organize Media Library Folder, Pages, Posts, File Manager plugin for WordPress is vulnerable to Unauthorized Arbitrary Media Replacement in all versions up to, and including, 3.1.5. This is due to missing object-level authorization checks in the handle_folders_file_upload() function. This makes it possible for authenticated attackers, with Author-level access and above, to replace arbitrary media files from the WordPress Media Library.

🎖@cveNotify

🚨 CVE-2025-14275
The Jeg Elementor Kit plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 3.0.1 due to insufficient input sanitization in the countdown widget's redirect functionality. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary JavaScript that will execute when an administrator or other user views the page containing the malicious countdown element.

🎖@cveNotify

🚨 CVE-2023-4911
A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.

🎖@cveNotify

🚨 CVE-2025-59888
Improper quotation in search paths in the Eaton UPS Companion software installer could lead to arbitrary code execution of an attacker with the access to the

file system. This security issue has been fixed in the latest version of EUC which is available on the Eaton download center.

🎖@cveNotify

🚨 CVE-2026-0697
A flaw has been found in code-projects Intern Membership Management System 1.0. The impacted element is an unknown function of the file /intern/admin/edit_admin.php. This manipulation of the argument admin_id causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used.

🎖@cveNotify

🚨 CVE-2026-0698
A vulnerability has been found in code-projects Intern Membership Management System 1.0. This affects an unknown function of the file /intern/admin/edit_students.php. Such manipulation of the argument admin_id leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

🎖@cveNotify

🚨 CVE-2025-13679
The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the get_order_by_id() function in all versions up to, and including, 3.9.3. This makes it possible for authenticated attackers, with Subscriber-level access and above, to enumerate order IDs and exfiltrate sensitive data (PII), such as student name, email address, phone number, and billing address.

🎖@cveNotify

🚨 CVE-2026-0699
A vulnerability was found in code-projects Intern Membership Management System 1.0. This impacts an unknown function of the file /intern/admin/edit_activity.php. Performing a manipulation of the argument activity_id results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

🎖@cveNotify

🚨 CVE-2026-0700
A vulnerability was determined in code-projects Intern Membership Management System 1.0. Affected is an unknown function of the file /intern/admin/check_admin.php. Executing a manipulation of the argument Username can lead to sql injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

🎖@cveNotify

🚨 CVE-2026-0701
A vulnerability was identified in code-projects Intern Membership Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /intern/admin/add_admin.php. The manipulation of the argument Username leads to sql injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

🎖@cveNotify

🚨 CVE-2025-40325
In the Linux kernel, the following vulnerability has been resolved:

md/raid10: wait barrier before returning discard request with REQ_NOWAIT

raid10_handle_discard should wait barrier before returning a discard bio
which has REQ_NOWAIT. And there is no need to print warning calltrace
if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks
dmesg and reports error if dmesg has warning/error calltrace.

🎖@cveNotify

🚨 CVE-2025-38234
In the Linux kernel, the following vulnerability has been resolved:

sched/rt: Fix race in push_rt_task

Overview
========
When a CPU chooses to call push_rt_task and picks a task to push to
another CPU's runqueue then it will call find_lock_lowest_rq method
which would take a double lock on both CPUs' runqueues. If one of the
locks aren't readily available, it may lead to dropping the current
runqueue lock and reacquiring both the locks at once. During this window
it is possible that the task is already migrated and is running on some
other CPU. These cases are already handled. However, if the task is
migrated and has already been executed and another CPU is now trying to
wake it up (ttwu) such that it is queued again on the runqeue
(on_rq is 1) and also if the task was run by the same CPU, then the
current checks will pass even though the task was migrated out and is no
longer in the pushable tasks list.

Crashes
=======
This bug resulted in quite a few flavors of crashes triggering kernel
panics with various crash signatures such as assert failures, page
faults, null pointer dereferences, and queue corruption errors all
coming from scheduler itself.

Some of the crashes:
-> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? pick_next_task_rt+0x6e/0x1d0
? do_error_trap+0x64/0xa0
? pick_next_task_rt+0x6e/0x1d0
? exc_invalid_op+0x4c/0x60
? pick_next_task_rt+0x6e/0x1d0
? asm_exc_invalid_op+0x12/0x20
? pick_next_task_rt+0x6e/0x1d0
__schedule+0x5cb/0x790
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb

-> BUG: kernel NULL pointer dereference, address: 00000000000000c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? __warn+0x8a/0xe0
? exc_page_fault+0x3d6/0x520
? asm_exc_page_fault+0x1e/0x30
? pick_next_task_rt+0xb5/0x1d0
? pick_next_task_rt+0x8c/0x1d0
__schedule+0x583/0x7e0
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb

-> BUG: unable to handle page fault for address: ffff9464daea5900
kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p))

-> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? dequeue_top_rt_rq+0xa2/0xb0
? do_error_trap+0x64/0xa0
? dequeue_top_rt_rq+0xa2/0xb0
? exc_invalid_op+0x4c/0x60
? dequeue_top_rt_rq+0xa2/0xb0
? asm_exc_invalid_op+0x12/0x20
? dequeue_top_rt_rq+0xa2/0xb0
dequeue_rt_entity+0x1f/0x70
dequeue_task_rt+0x2d/0x70
__schedule+0x1a8/0x7e0
? blk_finish_plug+0x25/0x40
schedule+0x3c/0xb0
futex_wait_queue_me+0xb6/0x120
futex_wait+0xd9/0x240
do_futex+0x344/0xa90
? get_mm_exe_file+0x30/0x60
? audit_exe_compare+0x58/0x70
? audit_filter_rules.constprop.26+0x65e/0x1220
__x64_sys_futex+0x148/0x1f0
do_syscall_64+0x30/0x80
entry_SYSCALL_64_after_hwframe+0x62/0xc7

-> BUG: unable to handle page fault for address: ffff8cf3608bc2c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? spurious_kernel_fault+0x171/0x1c0
? exc_page_fault+0x3b6/0x520
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? asm_exc_page_fault+0x1e/0x30
? _cond_resched+0x15/0x30
? futex_wait_queue_me+0xc8/0x120
? futex_wait+0xd9/0x240
? try_to_wake_up+0x1b8/0x490
? futex_wake+0x78/0x160
? do_futex+0xcd/0xa90
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? plist_del+0x6a/0xd0
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? dequeue_pushable_task+0x20/0x70
? __schedule+0x382/0x7e0
? asm_sysvec_reschedule_i
---truncated---

🎖@cveNotify

🚨 CVE-2025-9086
1. A cookie is set using the `secure` keyword for `https://target`
2. curl is redirected to or otherwise made to speak with `http://target` (same
hostname, but using clear text HTTP) using the same cookie set
3. The same cookie name is set - but with just a slash as path (`path=\"/\",`).
Since this site is not secure, the cookie *should* just be ignored.
4. A bug in the path comparison logic makes curl read outside a heap buffer
boundary

The bug either causes a crash or it potentially makes the comparison come to
the wrong conclusion and lets the clear-text site override the contents of the
secure cookie, contrary to expectations and depending on the memory contents
immediately following the single-byte allocation that holds the path.

The presumed and correct behavior would be to plainly ignore the second set of
the cookie since it was already set as secure on a secure host so overriding
it on an insecure host should not be okay.

🎖@cveNotify

🚨 CVE-2025-39872
In the Linux kernel, the following vulnerability has been resolved:

hsr: hold rcu and dev lock for hsr_get_port_ndev

hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock.
On the other hand, before return the port device, we need to hold the
device reference to avoid UaF in the caller function.

🎖@cveNotify

🚨 CVE-2025-14017
When doing multi-threaded LDAPS transfers (LDAP over TLS) with libcurl,
changing TLS options in one thread would inadvertently change them globally
and therefore possibly also affect other concurrently setup transfers.

Disabling certificate verification for a specific transfer could
unintentionally disable the feature for other threads as well.

🎖@cveNotify