🚨 CVE-2024-26994
In the Linux kernel, the following vulnerability has been resolved:
speakup: Avoid crash on very long word
In case a console is set up really large and contains a really long word
(> 256 characters), we have to stop before the length of the word buffer.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
speakup: Avoid crash on very long word
In case a console is set up really large and contains a really long word
(> 256 characters), we have to stop before the length of the word buffer.
🎖@cveNotify
🚨 CVE-2024-26997
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
Fixed variable dereference issue in DDMA completion flow.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
Fixed variable dereference issue in DDMA completion flow.
🎖@cveNotify
🚨 CVE-2024-27000
In the Linux kernel, the following vulnerability has been resolved:
serial: mxs-auart: add spinlock around changing cts state
The uart_handle_cts_change() function in serial_core expects the caller
to hold uport->lock. For example, I have seen the below kernel splat,
when the Bluetooth driver is loaded on an i.MX28 board.
[ 85.119255] ------------[ cut here ]------------
[ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec
[ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs
[ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1
[ 85.151396] Hardware name: Freescale MXS (Device Tree)
[ 85.156679] Workqueue: hci0 hci_power_on [bluetooth]
(...)
[ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4
[ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210
(...)
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
serial: mxs-auart: add spinlock around changing cts state
The uart_handle_cts_change() function in serial_core expects the caller
to hold uport->lock. For example, I have seen the below kernel splat,
when the Bluetooth driver is loaded on an i.MX28 board.
[ 85.119255] ------------[ cut here ]------------
[ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec
[ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs
[ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1
[ 85.151396] Hardware name: Freescale MXS (Device Tree)
[ 85.156679] Workqueue: hci0 hci_power_on [bluetooth]
(...)
[ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4
[ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210
(...)
🎖@cveNotify
🚨 CVE-2024-26955
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent kernel bug at submit_bh_wbc()
Fix a bug where nilfs_get_block() returns a successful status when
searching and inserting the specified block both fail inconsistently. If
this inconsistent behavior is not due to a previously fixed bug, then an
unexpected race is occurring, so return a temporary error -EAGAIN instead.
This prevents callers such as __block_write_begin_int() from requesting a
read into a buffer that is not mapped, which would cause the BUG_ON check
for the BH_Mapped flag in submit_bh_wbc() to fail.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent kernel bug at submit_bh_wbc()
Fix a bug where nilfs_get_block() returns a successful status when
searching and inserting the specified block both fail inconsistently. If
this inconsistent behavior is not due to a previously fixed bug, then an
unexpected race is occurring, so return a temporary error -EAGAIN instead.
This prevents callers such as __block_write_begin_int() from requesting a
read into a buffer that is not mapped, which would cause the BUG_ON check
for the BH_Mapped flag in submit_bh_wbc() to fail.
🎖@cveNotify
🚨 CVE-2024-26956
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
Patch series "nilfs2: fix kernel bug at submit_bh_wbc()".
This resolves a kernel BUG reported by syzbot. Since there are two
flaws involved, I've made each one a separate patch.
The first patch alone resolves the syzbot-reported bug, but I think
both fixes should be sent to stable, so I've tagged them as such.
This patch (of 2):
Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data
to a nilfs2 file system whose metadata is corrupted.
There are two flaws involved in this issue.
The first flaw is that when nilfs_get_block() locates a data block using
btree or direct mapping, if the disk address translation routine
nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata
corruption, it can be passed back to nilfs_get_block(). This causes
nilfs_get_block() to misidentify an existing block as non-existent,
causing both data block lookup and insertion to fail inconsistently.
The second flaw is that nilfs_get_block() returns a successful status in
this inconsistent state. This causes the caller __block_write_begin_int()
or others to request a read even though the buffer is not mapped,
resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc()
failing.
This fixes the first issue by changing the return value to code -EINVAL
when a conversion using DAT fails with code -ENOENT, avoiding the
conflicting condition that leads to the kernel bug described above. Here,
code -EINVAL indicates that metadata corruption was detected during the
block lookup, which will be properly handled as a file system error and
converted to -EIO when passing through the nilfs2 bmap layer.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
Patch series "nilfs2: fix kernel bug at submit_bh_wbc()".
This resolves a kernel BUG reported by syzbot. Since there are two
flaws involved, I've made each one a separate patch.
The first patch alone resolves the syzbot-reported bug, but I think
both fixes should be sent to stable, so I've tagged them as such.
This patch (of 2):
Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data
to a nilfs2 file system whose metadata is corrupted.
There are two flaws involved in this issue.
The first flaw is that when nilfs_get_block() locates a data block using
btree or direct mapping, if the disk address translation routine
nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata
corruption, it can be passed back to nilfs_get_block(). This causes
nilfs_get_block() to misidentify an existing block as non-existent,
causing both data block lookup and insertion to fail inconsistently.
The second flaw is that nilfs_get_block() returns a successful status in
this inconsistent state. This causes the caller __block_write_begin_int()
or others to request a read even though the buffer is not mapped,
resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc()
failing.
This fixes the first issue by changing the return value to code -EINVAL
when a conversion using DAT fails with code -ENOENT, avoiding the
conflicting condition that leads to the kernel bug described above. Here,
code -EINVAL indicates that metadata corruption was detected during the
block lookup, which will be properly handled as a file system error and
converted to -EIO when passing through the nilfs2 bmap layer.
🎖@cveNotify
🚨 CVE-2025-65270
Reflected cross-site scripting (XSS) vulnerability in ClinCapture EDC 3.0 and 2.2.3, allowing an unauthenticated remote attacker to execute JavaScript code in the context of the victim's browser.
🎖@cveNotify
Reflected cross-site scripting (XSS) vulnerability in ClinCapture EDC 3.0 and 2.2.3, allowing an unauthenticated remote attacker to execute JavaScript code in the context of the victim's browser.
🎖@cveNotify
GitHub
GitHub - xh4vm/CVE-2025-65270: Reflected XSS in ClinCapture EDC
Reflected XSS in ClinCapture EDC. Contribute to xh4vm/CVE-2025-65270 development by creating an account on GitHub.
🚨 CVE-2025-63662
Insecure permissions in the /api/v1/agents API of GT Edge AI Platform before v2.0.10-dev allows unauthorized attackers to access sensitive information.
🎖@cveNotify
Insecure permissions in the /api/v1/agents API of GT Edge AI Platform before v2.0.10-dev allows unauthorized attackers to access sensitive information.
🎖@cveNotify
Gist
CVE-2025-63662.txt
GitHub Gist: instantly share code, notes, and snippets.
🚨 CVE-2025-15034
A security flaw has been discovered in itsourcecode Student Management System 1.0. This affects an unknown part of the file /record.php. The manipulation of the argument ID results in sql injection. The attack can be executed remotely. The exploit has been released to the public and may be exploited.
🎖@cveNotify
A security flaw has been discovered in itsourcecode Student Management System 1.0. This affects an unknown part of the file /record.php. The manipulation of the argument ID results in sql injection. The attack can be executed remotely. The exploit has been released to the public and may be exploited.
🎖@cveNotify
GitHub
itsourcecode Student Management System V1.0 SQL Injection Vulnerability · Issue #29 · ltranquility/CVE
itsourcecode Student Management System V1.0 SQL Injection Vulnerability NAME OF AFFECTED PRODUCT(S) Student Managemen System Vendor Homepage https://itsourcecode.com/free-projects/php-project/stude...
🚨 CVE-2025-67743
Local Deep Research is an AI-powered research assistant for deep, iterative research. In versions from 1.3.0 to before 1.3.9, the download service (download_service.py) makes HTTP requests using raw requests.get() without utilizing the application's SSRF protection (safe_requests.py). This can allow attackers to access internal services and attempt to reach cloud provider metadata endpoints (AWS/GCP/Azure), as well as perform internal network reconnaissance, by submitting malicious URLs through the API, depending on the deployment and surrounding controls. This issue has been patched in version 1.3.9.
🎖@cveNotify
Local Deep Research is an AI-powered research assistant for deep, iterative research. In versions from 1.3.0 to before 1.3.9, the download service (download_service.py) makes HTTP requests using raw requests.get() without utilizing the application's SSRF protection (safe_requests.py). This can allow attackers to access internal services and attempt to reach cloud provider metadata endpoints (AWS/GCP/Azure), as well as perform internal network reconnaissance, by submitting malicious URLs through the API, depending on the deployment and surrounding controls. This issue has been patched in version 1.3.9.
🎖@cveNotify
GitHub
fix: enforce SSRF protection across all HTTP requests · LearningCircuit/local-deep-research@b79089f
Replace direct requests.get/post/Session usage with safe_get/safe_post/SafeSession
from the security module to prevent SSRF vulnerabilities (CWE-918).
Changes:
- Migrate 19 files (~40 instances) t...
from the security module to prevent SSRF vulnerabilities (CWE-918).
Changes:
- Migrate 19 files (~40 instances) t...
🚨 CVE-2023-52163
Digiever DS-2105 Pro 3.1.0.71-11 devices allow time_tzsetup.cgi Command Injection. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
🎖@cveNotify
Digiever DS-2105 Pro 3.1.0.71-11 devices allow time_tzsetup.cgi Command Injection. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
🎖@cveNotify
Akamai
DigiEver Fix That IoT Thing! | Akamai
A vulnerability in DigiEver DS-2105 Pro DVRs is being exploited to spread a Mirai variant that has been modified to use improved encryption algorithms.
🚨 CVE-2025-54236
Adobe Commerce versions 2.4.9-alpha2, 2.4.8-p2, 2.4.7-p7, 2.4.6-p12, 2.4.5-p14, 2.4.4-p15 and earlier are affected by an Improper Input Validation vulnerability. A successful attacker can abuse this to achieve session takeover, increasing the confidentiality, and integrity impact to high. Exploitation of this issue does not require user interaction.
🎖@cveNotify
Adobe Commerce versions 2.4.9-alpha2, 2.4.8-p2, 2.4.7-p7, 2.4.6-p12, 2.4.5-p14, 2.4.4-p15 and earlier are affected by an Improper Input Validation vulnerability. A successful attacker can abuse this to achieve session takeover, increasing the confidentiality, and integrity impact to high. Exploitation of this issue does not require user interaction.
🎖@cveNotify
Adobe
Adobe Security Bulletin
Security Updates Available for Adobe Commerce | APSB25-88
🚨 CVE-2025-64310
EPSON WebConfig and Epson Web Control for SEIKO EPSON Projector Products do not restrict excessive authentication attempts. An administrative user's password may be identified through a brute force attack.
🎖@cveNotify
EPSON WebConfig and Epson Web Control for SEIKO EPSON Projector Products do not restrict excessive authentication attempts. An administrative user's password may be identified through a brute force attack.
🎖@cveNotify
jvn.jp
JVNVU#95021911: EPSON WebConfig / Epson Web Control for SEIKO EPSON Projector Products do not restrict excessive authentication…
Japan Vulnerability Notes
🚨 CVE-2025-12934
The Beaver Builder – WordPress Page Builder plugin for WordPress is vulnerable to unauthorized access and modification of data due to a missing capability check on the 'duplicate_wpml_layout' function in all versions up to, and including, 2.9.4.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary posts with the content of other existing posts, potentially exposing private and password-protected content and deleting any content that is not saved in revisions or backups. Posts must have been created with Beaver Builder to be copied or updated.
🎖@cveNotify
The Beaver Builder – WordPress Page Builder plugin for WordPress is vulnerable to unauthorized access and modification of data due to a missing capability check on the 'duplicate_wpml_layout' function in all versions up to, and including, 2.9.4.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary posts with the content of other existing posts, potentially exposing private and password-protected content and deleting any content that is not saved in revisions or backups. Posts must have been created with Beaver Builder to be copied or updated.
🎖@cveNotify
🚨 CVE-2025-14155
The Premium Addons for Elementor – Powerful Elementor Templates & Widgets plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'get_template_content' function in all versions up to, and including, 4.11.53. This makes it possible for unauthenticated attackers to view the content of private, draft, and pending templates.
🎖@cveNotify
The Premium Addons for Elementor – Powerful Elementor Templates & Widgets plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'get_template_content' function in all versions up to, and including, 4.11.53. This makes it possible for unauthenticated attackers to view the content of private, draft, and pending templates.
🎖@cveNotify
🚨 CVE-2025-14163
The Premium Addons for Elementor plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 4.11.53. This is due to missing nonce validation in the 'insert_inner_template' function. This makes it possible for unauthenticated attackers to create arbitrary Elementor templates via a forged request granted they can trick a site administrator or other user with the edit_posts capability into performing an action such as clicking on a link.
🎖@cveNotify
The Premium Addons for Elementor plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 4.11.53. This is due to missing nonce validation in the 'insert_inner_template' function. This makes it possible for unauthenticated attackers to create arbitrary Elementor templates via a forged request granted they can trick a site administrator or other user with the edit_posts capability into performing an action such as clicking on a link.
🎖@cveNotify
🚨 CVE-2025-14388
The PhastPress plugin for WordPress is vulnerable to Unauthenticated Arbitrary File Read via null byte injection in all versions up to, and including, 3.7. This is due to a discrepancy between the extension validation in `getExtensionForURL()` which operates on URL-decoded paths, and `appendNormalized()` which strips everything after a null byte before constructing the filesystem path. This makes it possible for unauthenticated attackers to read arbitrary files from the webroot, including wp-config.php, by appending a double URL-encoded null byte (%2500) followed by an allowed extension (.txt) to the file path.
🎖@cveNotify
The PhastPress plugin for WordPress is vulnerable to Unauthenticated Arbitrary File Read via null byte injection in all versions up to, and including, 3.7. This is due to a discrepancy between the extension validation in `getExtensionForURL()` which operates on URL-decoded paths, and `appendNormalized()` which strips everything after a null byte before constructing the filesystem path. This makes it possible for unauthenticated attackers to read arbitrary files from the webroot, including wp-config.php, by appending a double URL-encoded null byte (%2500) followed by an allowed extension (.txt) to the file path.
🎖@cveNotify
🚨 CVE-2025-14548
The Calendar plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'event_desc' parameter in all versions up to, and including, 1.3.16 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page, granted they can convince an administrator to enable lower privilege users to manage calendar events via the plugin settings.
🎖@cveNotify
The Calendar plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'event_desc' parameter in all versions up to, and including, 1.3.16 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page, granted they can convince an administrator to enable lower privilege users to manage calendar events via the plugin settings.
🎖@cveNotify
🚨 CVE-2025-67912
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Gal Dubinski Stars Testimonials allows Stored XSS.This issue affects Stars Testimonials: from n/a through 3.3.4.
🎖@cveNotify
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Gal Dubinski Stars Testimonials allows Stored XSS.This issue affects Stars Testimonials: from n/a through 3.3.4.
🎖@cveNotify
Patchstack
Cross Site Scripting (XSS) in WordPress Stars Testimonials Plugin
Patchstack is the leading open source vulnerability research organization. Find information and protection for all WordPress, Drupal and Joomla security issues.
🚨 CVE-2024-4761
Out of bounds write in V8 in Google Chrome prior to 124.0.6367.207 allowed a remote attacker to perform an out of bounds memory write via a crafted HTML page. (Chromium security severity: High)
🎖@cveNotify
Out of bounds write in V8 in Google Chrome prior to 124.0.6367.207 allowed a remote attacker to perform an out of bounds memory write via a crafted HTML page. (Chromium security severity: High)
🎖@cveNotify
Chrome Releases
Stable Channel Update for Desktop
The Stable channel has been updated to 124.0.6367.207/.208 for Mac and Windows and 124.0.6367.207 for Linux which will roll out over the...
🚨 CVE-2025-14733
An Out-of-bounds Write vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer.This vulnerability affects Fireware OS 11.10.2 up to and including 11.12.4_Update1, 12.0 up to and including 12.11.5 and 2025.1 up to and including 2025.1.3.
🎖@cveNotify
An Out-of-bounds Write vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to execute arbitrary code. This vulnerability affects both the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer.This vulnerability affects Fireware OS 11.10.2 up to and including 11.12.4_Update1, 12.0 up to and including 12.11.5 and 2025.1 up to and including 2025.1.3.
🎖@cveNotify
Watchguard
WatchGuard Firebox iked Out of Bounds Write Vulnerability
Updated 29 December 2025: Updated to add two additional IP addresses to the Indicators of Attack Updated 23 December 2025: Updated with post-exploitation activity identified up to this point Updated 19 December 2025: Updated to clarify the significance of…
🚨 CVE-2023-52163
Digiever DS-2105 Pro 3.1.0.71-11 devices allow time_tzsetup.cgi Command Injection. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
🎖@cveNotify
Digiever DS-2105 Pro 3.1.0.71-11 devices allow time_tzsetup.cgi Command Injection. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
🎖@cveNotify
Akamai
DigiEver Fix That IoT Thing! | Akamai
A vulnerability in DigiEver DS-2105 Pro DVRs is being exploited to spread a Mirai variant that has been modified to use improved encryption algorithms.