🚨 CVE-2025-63665
An issue in GT Edge AI Platform Versions before v2.0.10-dev allows attackers to execute arbitrary code via injecting a crafted JSON payload into the Prompt window.
🎖@cveNotify
An issue in GT Edge AI Platform Versions before v2.0.10-dev allows attackers to execute arbitrary code via injecting a crafted JSON payload into the Prompt window.
🎖@cveNotify
Gist
CVE-2025-63665.txt
GitHub Gist: instantly share code, notes, and snippets.
🚨 CVE-2025-37932
In the Linux kernel, the following vulnerability has been resolved:
sch_htb: make htb_qlen_notify() idempotent
htb_qlen_notify() always deactivates the HTB class and in fact could
trigger a warning if it is already deactivated. Therefore, it is not
idempotent and not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
sch_htb: make htb_qlen_notify() idempotent
htb_qlen_notify() always deactivates the HTB class and in fact could
trigger a warning if it is already deactivated. Therefore, it is not
idempotent and not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life.
🎖@cveNotify
🚨 CVE-2025-37936
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.
🎖@cveNotify
🚨 CVE-2025-37937
In the Linux kernel, the following vulnerability has been resolved:
objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds()
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds()
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()
🎖@cveNotify
🚨 CVE-2025-37938
In the Linux kernel, the following vulnerability has been resolved:
tracing: Verify event formats that have "%*p.."
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
tracing: Verify event formats that have "%*p.."
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
🎖@cveNotify
🚨 CVE-2025-37940
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Add cond_resched() to ftrace_graph_set_hash()
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Add cond_resched() to ftrace_graph_set_hash()
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.
🎖@cveNotify
🚨 CVE-2024-29887
Serverpod is an app and web server, built for the Flutter and Dart ecosystem. This bug bypassed the validation of TSL certificates on all none web HTTP clients in the `serverpod_client` package. Making them susceptible to a man in the middle attack against encrypted traffic between the client device and the server. An attacker would need to be able to intercept the traffic and highjack the connection to the server for this vulnerability to be used. Upgrading to version `1.2.6` resolves this issue.
🎖@cveNotify
Serverpod is an app and web server, built for the Flutter and Dart ecosystem. This bug bypassed the validation of TSL certificates on all none web HTTP clients in the `serverpod_client` package. Making them susceptible to a man in the middle attack against encrypted traffic between the client device and the server. An attacker would need to be able to intercept the traffic and highjack the connection to the server for this vulnerability to be used. Upgrading to version `1.2.6` resolves this issue.
🎖@cveNotify
GitHub
fix: Remove faulty certificate check. (#2041) · serverpod/serverpod@d55bf8d
Serverpod is a next-generation app and web server, explicitly built for the Flutter and Dart ecosystem. - fix: Remove faulty certificate check. (#2041) · serverpod/serverpod@d55bf8d
🚨 CVE-2024-5739
The in-app browser of LINE client for iOS versions below 14.9.0 contains a Universal XSS (UXSS) vulnerability. This vulnerability allows for cross-site scripting (XSS) where arbitrary JavaScript can be executed in the top frame from an embedded iframe on any displayed web site within the in-app browser. The in-app browser is usually opened by tapping on URLs contained in chat messages, and for the attack to be successful, the victim must trigger a click event on a malicious iframe. If an iframe embedded in any website can be controlled by an attacker, this vulnerability could be exploited to capture or alter content displayed in the top frame, as well as user session information. This vulnerability affects LINE client for iOS versions below 14.9.0 and does not affect other LINE clients such as LINE client for Android. Please update LINE client for iOS to version 14.9.0 or higher.
🎖@cveNotify
The in-app browser of LINE client for iOS versions below 14.9.0 contains a Universal XSS (UXSS) vulnerability. This vulnerability allows for cross-site scripting (XSS) where arbitrary JavaScript can be executed in the top frame from an embedded iframe on any displayed web site within the in-app browser. The in-app browser is usually opened by tapping on URLs contained in chat messages, and for the attack to be successful, the victim must trigger a click event on a malicious iframe. If an iframe embedded in any website can be controlled by an attacker, this vulnerability could be exploited to capture or alter content displayed in the top frame, as well as user session information. This vulnerability affects LINE client for iOS versions below 14.9.0 and does not affect other LINE clients such as LINE client for Android. Please update LINE client for iOS to version 14.9.0 or higher.
🎖@cveNotify
🚨 CVE-2025-38300
In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare()
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare()
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path.
🎖@cveNotify
🚨 CVE-2025-38304
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix NULL pointer deference on eir_get_service_data
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix NULL pointer deference on eir_get_service_data
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
🎖@cveNotify
🚨 CVE-2025-38305
In the Linux kernel, the following vulnerability has been resolved:
ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ptp->n_vclocks_mux);
lock(&ptp->n_vclocks_mux);
*** DEADLOCK ***
....
============================================
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ptp->n_vclocks_mux);
lock(&ptp->n_vclocks_mux);
*** DEADLOCK ***
....
============================================
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking.
🎖@cveNotify
🚨 CVE-2025-38310
In the Linux kernel, the following vulnerability has been resolved:
seg6: Fix validation of nexthop addresses
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
seg6: Fix validation of nexthop addresses
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one.
🎖@cveNotify
🚨 CVE-2025-38312
In the Linux kernel, the following vulnerability has been resolved:
fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod()
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod()
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
🎖@cveNotify
❤1
🚨 CVE-2024-27091
GeoNode is a geospatial content management system, a platform for the management and publication of geospatial data. An issue exists within GEONODE where the current rich text editor is vulnerable to Stored XSS. The applications cookies are set securely, but it is possible to retrieve a victims CSRF token and issue a request to change another user's email address to perform a full account takeover. Due to the script element not impacting the CORS policy, requests will succeed. This vulnerability is fixed in 4.2.3.
🎖@cveNotify
GeoNode is a geospatial content management system, a platform for the management and publication of geospatial data. An issue exists within GEONODE where the current rich text editor is vulnerable to Stored XSS. The applications cookies are set securely, but it is possible to retrieve a victims CSRF token and issue a request to change another user's email address to perform a full account takeover. Due to the script element not impacting the CORS policy, requests will succeed. This vulnerability is fixed in 4.2.3.
🎖@cveNotify
GitHub
[Fixes #11862] Sanitize HTML data (#11958) · GeoNode/geonode@e53bdef
GeoNode is an open source platform that facilitates the creation, sharing, and collaborative use of geospatial data. - [Fixes #11862] Sanitize HTML data (#11958) · GeoNode/geonode@e53bdef
🚨 CVE-2025-1386
When using the ch-go library, under a specific condition when the query includes a large, uncompressed malicious external data, it is possible for an attacker in control of such data to smuggle another query packet into the connection stream.
🎖@cveNotify
When using the ch-go library, under a specific condition when the query includes a large, uncompressed malicious external data, it is possible for an attacker in control of such data to smuggle another query packet into the connection stream.
🎖@cveNotify
GitHub
CVE-2025-1386- Query smuggling in ch-go library
### Impact
When using the ch-go library, under a specific condition when the query includes a large, uncompressed malicious external data, it is possible for an attacker in control of such data ...
When using the ch-go library, under a specific condition when the query includes a large, uncompressed malicious external data, it is possible for an attacker in control of such data ...
🚨 CVE-2012-10019
The Front End Editor plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation via the upload.php file in versions before 2.3. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected sites server which may make remote code execution possible.
🎖@cveNotify
The Front End Editor plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation via the upload.php file in versions before 2.3. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected sites server which may make remote code execution possible.
🎖@cveNotify
packetstorm.news
Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories, and Whitepapers
🚨 CVE-2025-4655
SSRF vulnerability in FreeMarker templates in Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.5, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.15, 7.4 GA through update 92 allows template editors to bypass access validations via crafted URLs.
🎖@cveNotify
SSRF vulnerability in FreeMarker templates in Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.5, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.15, 7.4 GA through update 92 allows template editors to bypass access validations via crafted URLs.
🎖@cveNotify
🚨 CVE-2025-58386
In Terminalfour 8 through 8.4.1.1, the userLevel parameter in the user management function is not subject to proper server-side authorization checks. A Power User can intercept and modify this parameter to assign the Administrator role to other existing lower-privileged accounts, or invite a new lower-privileged account and escalate its privileges. While manipulating this request, the Power User can also change the target account's password, effectively taking full control of it.
🎖@cveNotify
In Terminalfour 8 through 8.4.1.1, the userLevel parameter in the user management function is not subject to proper server-side authorization checks. A Power User can intercept and modify this parameter to assign the Administrator role to other existing lower-privileged accounts, or invite a new lower-privileged account and escalate its privileges. While manipulating this request, the Power User can also change the target account's password, effectively taking full control of it.
🎖@cveNotify
Terminalfour
CVE-2025-58386 - Terminalfour Documentation
Potential Privilege escalation vulnerability
🚨 CVE-2025-67494
ZITADEL is an open-source identity infrastructure tool. Versions 4.7.0 and below are vulnerable to an unauthenticated, full-read SSRF vulnerability. The ZITADEL Login UI (V2) treats the x-zitadel-forward-host header as a trusted fallback for all deployments, including self-hosted instances. This allows an unauthenticated attacker to force the server to make HTTP requests to arbitrary domains, such as internal addresses, and read the responses, enabling data exfiltration and bypassing network-segmentation controls. This issue is fixed in version 4.7.1.
🎖@cveNotify
ZITADEL is an open-source identity infrastructure tool. Versions 4.7.0 and below are vulnerable to an unauthenticated, full-read SSRF vulnerability. The ZITADEL Login UI (V2) treats the x-zitadel-forward-host header as a trusted fallback for all deployments, including self-hosted instances. This allows an unauthenticated attacker to force the server to make HTTP requests to arbitrary domains, such as internal addresses, and read the responses, enabling data exfiltration and bypassing network-segmentation controls. This issue is fixed in version 4.7.1.
🎖@cveNotify
GitHub
fix(login): Centralize host header resolution and forward headers to … · zitadel/zitadel@4c879b4
…APIs
This PR refactors the host resolution logic to establish a single source of truth for determining the instance and public hosts from request headers. It also ensures that headers are properl...
This PR refactors the host resolution logic to establish a single source of truth for determining the instance and public hosts from request headers. It also ensures that headers are properl...
🚨 CVE-2024-11058
A vulnerability was found in CodeAstro Real Estate Management System up to 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /aboutedit.php of the component About Us Page. The manipulation of the argument id leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
🎖@cveNotify
A vulnerability was found in CodeAstro Real Estate Management System up to 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /aboutedit.php of the component About Us Page. The manipulation of the argument id leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
🎖@cveNotify
🚨 CVE-2024-49841
Memory corruption during memory assignment to headless peripheral VM due to incorrect error code handling.
🎖@cveNotify
Memory corruption during memory assignment to headless peripheral VM due to incorrect error code handling.
🎖@cveNotify