🚨 CVE-2024-31153
Improper input validation for some Intel(R) QuickAssist Technology software before version 2.2.0 may allow an authenticated user to potentially enable denial of service via local access.
🎖@cveNotify
Improper input validation for some Intel(R) QuickAssist Technology software before version 2.2.0 may allow an authenticated user to potentially enable denial of service via local access.
🎖@cveNotify
Intel
INTEL-SA-01124
🚨 CVE-2024-31858
Out-of-bounds write for some Intel(R) QuickAssist Technology software before version 2.2.0 may allow an authenticated user to potentially enable escalation of privilege via local access.
🎖@cveNotify
Out-of-bounds write for some Intel(R) QuickAssist Technology software before version 2.2.0 may allow an authenticated user to potentially enable escalation of privilege via local access.
🎖@cveNotify
Intel
INTEL-SA-01124
🚨 CVE-2025-27415
Nuxt is an open-source web development framework for Vue.js. Prior to 3.16.0, by sending a crafted HTTP request to a server behind an CDN, it is possible in some circumstances to poison the CDN cache and highly impacts the availability of a site. It is possible to craft a request, such as https://mysite.com/?/_payload.json which will be rendered as JSON. If the CDN in front of a Nuxt site ignores the query string when determining whether to cache a route, then this JSON response could be served to future visitors to the site. An attacker can perform this attack to a vulnerable site in order to make a site unavailable indefinitely. It is also possible in the case where the cache will be reset to make a small script to send a request each X seconds (=caching duration) so that the cache is permanently poisoned making the site completely unavailable. This vulnerability is fixed in 3.16.0.
🎖@cveNotify
Nuxt is an open-source web development framework for Vue.js. Prior to 3.16.0, by sending a crafted HTTP request to a server behind an CDN, it is possible in some circumstances to poison the CDN cache and highly impacts the availability of a site. It is possible to craft a request, such as https://mysite.com/?/_payload.json which will be rendered as JSON. If the CDN in front of a Nuxt site ignores the query string when determining whether to cache a route, then this JSON response could be served to future visitors to the site. An attacker can perform this attack to a vulnerable site in order to make a site unavailable indefinitely. It is also possible in the case where the cache will be reset to make a small script to send a request each X seconds (=caching duration) so that the cache is permanently poisoned making the site completely unavailable. This vulnerability is fixed in 3.16.0.
🎖@cveNotify
GitHub
DOS via cache poisoning with payload rendering response
### Summary
By sending a crafted HTTP request to a server behind an CDN, it is possible in some circumstances to poison the CDN cache and highly impacts the availability of a site.
It is poss...
By sending a crafted HTTP request to a server behind an CDN, it is possible in some circumstances to poison the CDN cache and highly impacts the availability of a site.
It is poss...
🚨 CVE-2022-50276
In the Linux kernel, the following vulnerability has been resolved:
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.
So return ENOMEM if kasprintf() return NULL pointer.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.
So return ENOMEM if kasprintf() return NULL pointer.
🎖@cveNotify
🚨 CVE-2018-19591
In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.
🎖@cveNotify
In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.
🎖@cveNotify
🚨 CVE-2019-15166
lmp_print_data_link_subobjs() in print-lmp.c in tcpdump before 4.9.3 lacks certain bounds checks.
🎖@cveNotify
lmp_print_data_link_subobjs() in print-lmp.c in tcpdump before 4.9.3 lacks certain bounds checks.
🎖@cveNotify
🚨 CVE-2019-15165
sf-pcapng.c in libpcap before 1.9.1 does not properly validate the PHB header length before allocating memory.
🎖@cveNotify
sf-pcapng.c in libpcap before 1.9.1 does not properly validate the PHB header length before allocating memory.
🎖@cveNotify
🚨 CVE-2019-19956
xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc->oldNs.
🎖@cveNotify
xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc->oldNs.
🎖@cveNotify
🚨 CVE-2020-15861
Net-SNMP through 5.7.3 allows Escalation of Privileges because of UNIX symbolic link (symlink) following.
🎖@cveNotify
Net-SNMP through 5.7.3 allows Escalation of Privileges because of UNIX symbolic link (symlink) following.
🎖@cveNotify
🚨 CVE-2020-28196
MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.
🎖@cveNotify
MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.
🎖@cveNotify
GitHub
Add recursion limit for ASN.1 indefinite lengths · krb5/krb5@57415dd
The libkrb5 ASN.1 decoder supports BER indefinite lengths. It
computes the tag length using recursion; the lack of a recursion limit
allows an attacker to overrun the stack and cause the process t...
computes the tag length using recursion; the lack of a recursion limit
allows an attacker to overrun the stack and cause the process t...
🚨 CVE-2024-29033
OAuthenticator provides plugins for JupyterHub to use common OAuth providers, as well as base classes for writing one's own Authenticators with any OAuth 2.0 provider. `GoogleOAuthenticator.hosted_domain` is used to restrict what Google accounts can be authorized access to a JupyterHub. The restriction is intented to be to Google accounts part of one or more Google organization verified to control specified domain(s). Prior to version 16.3.0, the actual restriction has been to Google accounts with emails ending with the domain. Such accounts could have been created by anyone which at one time was able to read an email associated with the domain. This was described by Dylan Ayrey (@dxa4481) in this [blog post] from 15th December 2023). OAuthenticator 16.3.0 contains a patch for this issue. As a workaround, restrict who can login another way, such as `allowed_users` or `allowed_google_groups`.
🎖@cveNotify
OAuthenticator provides plugins for JupyterHub to use common OAuth providers, as well as base classes for writing one's own Authenticators with any OAuth 2.0 provider. `GoogleOAuthenticator.hosted_domain` is used to restrict what Google accounts can be authorized access to a JupyterHub. The restriction is intented to be to Google accounts part of one or more Google organization verified to control specified domain(s). Prior to version 16.3.0, the actual restriction has been to Google accounts with emails ending with the domain. Such accounts could have been created by anyone which at one time was able to read an email associated with the domain. This was described by Dylan Ayrey (@dxa4481) in this [blog post] from 15th December 2023). OAuthenticator 16.3.0 contains a patch for this issue. As a workaround, restrict who can login another way, such as `allowed_users` or `allowed_google_groups`.
🎖@cveNotify
GitHub
Merge pull request from GHSA-55m3-44xf-hg4h · jupyterhub/oauthenticator@5246b09
GoogleOAuthenticator.hosted_domain: check against hd, not email's domain
🚨 CVE-2024-29036
Saleor Storefront is software for building e-commerce experiences. Prior to commit 579241e75a5eb332ccf26e0bcdd54befa33f4783, when any user authenticates in the storefront, anonymous users are able to access their data. The session is leaked through cache and can be accessed by anyone. Users should upgrade to a version that incorporates commit 579241e75a5eb332ccf26e0bcdd54befa33f4783 or later to receive a patch. A possible workaround is to temporarily disable authentication by changing the usage of `createSaleorAuthClient()`.
🎖@cveNotify
Saleor Storefront is software for building e-commerce experiences. Prior to commit 579241e75a5eb332ccf26e0bcdd54befa33f4783, when any user authenticates in the storefront, anonymous users are able to access their data. The session is leaked through cache and can be accessed by anyone. Users should upgrade to a version that incorporates commit 579241e75a5eb332ccf26e0bcdd54befa33f4783 or later to receive a patch. A possible workaround is to temporarily disable authentication by changing the usage of `createSaleorAuthClient()`.
🎖@cveNotify
GitHub
Update README · saleor/auth-sdk@56db134
Contribute to saleor/auth-sdk development by creating an account on GitHub.
🚨 CVE-2024-29037
datahub-helm provides the Kubernetes Helm charts for deploying Datahub and its dependencies on a Kubernetes cluster. Starting in version 0.1.143 and prior to version 0.2.182, due to configuration issues in the helm chart, if there was a successful initial deployment during a limited window of time, personal access tokens were possibly created with a default secret key. Since the secret key is a static, publicly available value, someone could inspect the algorithm used to generate personal access tokens and generate their own for an instance. Deploying with Metadata Service Authentication enabled would have been difficult during window of releases. If someone circumvented the helm settings and manually set Metadata Service Authentication to be enabled using environment variables directly, this would skip over the autogeneration logic for the Kubernetes Secrets and DataHub GMS would default to the signing key specified statically in the application.yml. Most deployments probably did not attempt to circumvent the helm settings to enable Metadata Service Authentication during this time, so impact is most likely limited. Any deployments with Metadata Service Authentication enabled should ensure that their secret values are properly randomized. Version 0.2.182 contains a patch for this issue. As a workaround, one may reset the token signing key to be a random value, which will invalidate active personal access tokens.
🎖@cveNotify
datahub-helm provides the Kubernetes Helm charts for deploying Datahub and its dependencies on a Kubernetes cluster. Starting in version 0.1.143 and prior to version 0.2.182, due to configuration issues in the helm chart, if there was a successful initial deployment during a limited window of time, personal access tokens were possibly created with a default secret key. Since the secret key is a static, publicly available value, someone could inspect the algorithm used to generate personal access tokens and generate their own for an instance. Deploying with Metadata Service Authentication enabled would have been difficult during window of releases. If someone circumvented the helm settings and manually set Metadata Service Authentication to be enabled using environment variables directly, this would skip over the autogeneration logic for the Kubernetes Secrets and DataHub GMS would default to the signing key specified statically in the application.yml. Most deployments probably did not attempt to circumvent the helm settings to enable Metadata Service Authentication during this time, so impact is most likely limited. Any deployments with Metadata Service Authentication enabled should ensure that their secret values are properly randomized. Version 0.2.182 contains a patch for this issue. As a workaround, one may reset the token signing key to be a random value, which will invalidate active personal access tokens.
🎖@cveNotify
GitHub
fix(auth-secrets): fix system update secrets (#351) · acryldata/datahub-helm@ea8a178
* fix(auth-secret): remove auth secret from common template, cannot be used by all jobs
🚨 CVE-2022-50294
In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix memory leak in lbs_init_adapter()
When kfifo_alloc() failed in lbs_init_adapter(), cmd buffer is not
released. Add free memory to processing error path.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix memory leak in lbs_init_adapter()
When kfifo_alloc() failed in lbs_init_adapter(), cmd buffer is not
released. Add free memory to processing error path.
🎖@cveNotify
🚨 CVE-2024-27298
parse-server is a Parse Server for Node.js / Express. This vulnerability allows SQL injection when Parse Server is configured to use the PostgreSQL database. The vulnerability has been fixed in 6.5.0 and 7.0.0-alpha.20.
🎖@cveNotify
parse-server is a Parse Server for Node.js / Express. This vulnerability allows SQL injection when Parse Server is configured to use the PostgreSQL database. The vulnerability has been fixed in 6.5.0 and 7.0.0-alpha.20.
🎖@cveNotify
GitHub
fix: Improve PostgreSQL injection detection; fixes security vulnerabi… · parse-community/parse-server@a6e6549
…lity [GHSA-6927-3vr9-fxf2](https://github.com/parse-community/parse-server/security/advisories/GHSA-6927-3vr9-fxf2) which affects Parse Server deployments using a Postgres database (#8960)
🚨 CVE-2024-27303
electron-builder is a solution to package and build a ready for distribution Electron, Proton Native app for macOS, Windows and Linux. A vulnerability that only affects eletron-builder prior to 24.13.2 in Windows, the NSIS installer makes a system call to open cmd.exe via NSExec in the `.nsh` installer script. NSExec by default searches the current directory of where the installer is located before searching `PATH`. This means that if an attacker can place a malicious executable file named cmd.exe in the same folder as the installer, the installer will run the malicious file. Version 24.13.2 fixes this issue. No known workaround exists. The code executes at the installer-level before the app is present on the system, so there's no way to check if it exists in a current installer.
🎖@cveNotify
electron-builder is a solution to package and build a ready for distribution Electron, Proton Native app for macOS, Windows and Linux. A vulnerability that only affects eletron-builder prior to 24.13.2 in Windows, the NSIS installer makes a system call to open cmd.exe via NSExec in the `.nsh` installer script. NSExec by default searches the current directory of where the installer is located before searching `PATH`. This means that if an attacker can place a malicious executable file named cmd.exe in the same folder as the installer, the installer will run the malicious file. Version 24.13.2 fixes this issue. No known workaround exists. The code executes at the installer-level before the app is present on the system, so there's no way to check if it exists in a current installer.
🎖@cveNotify
GitHub
fix: execute `%SYSTEMROOT%` cmd.exe directly during NSIS installer (#… · electron-userland/electron-builder@8f4acff
…8059)
🚨 CVE-2024-28180
Package jose aims to provide an implementation of the Javascript Object Signing and Encryption set of standards. An attacker could send a JWE containing compressed data that used large amounts of memory and CPU when decompressed by Decrypt or DecryptMulti. Those functions now return an error if the decompressed data would exceed 250kB or 10x the compressed size (whichever is larger). This vulnerability has been patched in versions 4.0.1, 3.0.3 and 2.6.3.
🎖@cveNotify
Package jose aims to provide an implementation of the Javascript Object Signing and Encryption set of standards. An attacker could send a JWE containing compressed data that used large amounts of memory and CPU when decompressed by Decrypt or DecryptMulti. Those functions now return an error if the decompressed data would exceed 250kB or 10x the compressed size (whichever is larger). This vulnerability has been patched in versions 4.0.1, 3.0.3 and 2.6.3.
🎖@cveNotify
GitHub
v2: backport decompression limit fix (#109) · go-jose/go-jose@0dd4dd5
Backport from #107.
🚨 CVE-2022-50168
In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: fix freeing of not-finalized bpf_prog_pack
syzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens
with multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile()
on each sub program. And then, we call it on each sub program again. jit_data
is not freed in the first call of bpf_int_jit_compile(). Similarly we don't
call bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile().
If bpf_int_jit_compile() failed for one sub program, we will call
bpf_jit_binary_pack_finalize() for this sub program. However, we don't have a
chance to call it for other sub programs. Then we will hit "goto out_free" in
jit_subprogs(), and call bpf_jit_free on some subprograms that haven't got
bpf_jit_binary_pack_finalize() yet.
At this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is
freed erroneously.
Fix this with a custom bpf_jit_free() for x86_64, which calls
bpf_jit_binary_pack_finalize() if necessary. Also, with custom
bpf_jit_free(), bpf_prog_aux->use_bpf_prog_pack is not needed any more,
remove it.
[1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f
[2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: fix freeing of not-finalized bpf_prog_pack
syzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens
with multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile()
on each sub program. And then, we call it on each sub program again. jit_data
is not freed in the first call of bpf_int_jit_compile(). Similarly we don't
call bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile().
If bpf_int_jit_compile() failed for one sub program, we will call
bpf_jit_binary_pack_finalize() for this sub program. However, we don't have a
chance to call it for other sub programs. Then we will hit "goto out_free" in
jit_subprogs(), and call bpf_jit_free on some subprograms that haven't got
bpf_jit_binary_pack_finalize() yet.
At this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is
freed erroneously.
Fix this with a custom bpf_jit_free() for x86_64, which calls
bpf_jit_binary_pack_finalize() if necessary. Also, with custom
bpf_jit_free(), bpf_prog_aux->use_bpf_prog_pack is not needed any more,
remove it.
[1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f
[2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445
🎖@cveNotify
🚨 CVE-2025-6703
Improper Input Validation vulnerability in Mozilla neqo leads to an unexploitable crash..This issue affects neqo: from 0.4.24 through 0.13.2.
🎖@cveNotify
Improper Input Validation vulnerability in Mozilla neqo leads to an unexploitable crash..This issue affects neqo: from 0.4.24 through 0.13.2.
🎖@cveNotify
GitHub
transport/fc.rs: panic attempting to send MAX_DATA with value larger max varint
### Summary
A remote can trick us into attempting to send a `MAX_DATA` with a value larger than the maximum varint, thus leading to a panic.
Reported in https://bugzilla.mozilla.org/show_bug....
A remote can trick us into attempting to send a `MAX_DATA` with a value larger than the maximum varint, thus leading to a panic.
Reported in https://bugzilla.mozilla.org/show_bug....
🚨 CVE-2025-4779
lunary-ai/lunary versions prior to 1.9.24 are vulnerable to stored cross-site scripting (XSS). An unauthenticated attacker can inject malicious JavaScript into the `v1/runs/ingest` endpoint by adding an empty `citations` field, triggering a code path where `dangerouslySetInnerHTML` is used to render attacker-controlled text. This vulnerability allows the execution of arbitrary JavaScript in the context of the user's browser, potentially leading to session hijacking, data theft, or other malicious actions.
🎖@cveNotify
lunary-ai/lunary versions prior to 1.9.24 are vulnerable to stored cross-site scripting (XSS). An unauthenticated attacker can inject malicious JavaScript into the `v1/runs/ingest` endpoint by adding an empty `citations` field, triggering a code path where `dangerouslySetInnerHTML` is used to render attacker-controlled text. This vulnerability allows the execution of arbitrary JavaScript in the context of the user's browser, potentially leading to session hijacking, data theft, or other malicious actions.
🎖@cveNotify
🚨 CVE-2018-11574
Improper input validation together with an integer overflow in the EAP-TLS protocol implementation in PPPD may cause a crash, information disclosure, or authentication bypass. This implementation is distributed as a patch for PPPD 0.91, and includes the affected eap.c and eap-tls.c files. Configurations that use the `refuse-app` option are unaffected.
🎖@cveNotify
Improper input validation together with an integer overflow in the EAP-TLS protocol implementation in PPPD may cause a crash, information disclosure, or authentication bypass. This implementation is distributed as a patch for PPPD 0.91, and includes the affected eap.c and eap-tls.c files. Configurations that use the `refuse-app` option are unaffected.
🎖@cveNotify