🚨 CVE-2025-55129
HackerOne community member Kassem S.(kassem_s94) has reported that username handling in Revive Adserver was still vulnerable to impersonation attacks after the fix for CVE-2025-52672, via several alternate techniques. Homoglyphs based impersonation has been independently reported by other HackerOne users, such as itz_hari_ and khoof.

🎖@cveNotify

🚨 CVE-2023-53185
In the Linux kernel, the following vulnerability has been resolved:

wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes

A bad USB device is able to construct a service connection response
message with target endpoint being ENDPOINT0 which is reserved for
HTC_CTRL_RSVD_SVC and should not be modified to be used for any other
services.

Reject such service connection responses.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

🎖@cveNotify

🚨 CVE-2023-53171
In the Linux kernel, the following vulnerability has been resolved:

vfio/type1: prevent underflow of locked_vm via exec()

When a vfio container is preserved across exec, the task does not change,
but it gets a new mm with locked_vm=0, and loses the count from existing
dma mappings. If the user later unmaps a dma mapping, locked_vm underflows
to a large unsigned value, and a subsequent dma map request fails with
ENOMEM in __account_locked_vm.

To avoid underflow, grab and save the mm at the time a dma is mapped.
Use that mm when adjusting locked_vm, rather than re-acquiring the saved
task's mm, which may have changed. If the saved mm is dead, do nothing.

locked_vm is incremented for existing mappings in a subsequent patch.

🎖@cveNotify

🚨 CVE-2023-53173
In the Linux kernel, the following vulnerability has been resolved:

tty: pcn_uart: fix memory leak with using debugfs_lookup()

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

🎖@cveNotify

🚨 CVE-2023-53174
In the Linux kernel, the following vulnerability has been resolved:

scsi: core: Fix possible memory leak if device_add() fails

If device_add() returns error, the name allocated by dev_set_name() needs
be freed. As the comment of device_add() says, put_device() should be used
to decrease the reference count in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanp().

🎖@cveNotify

🚨 CVE-2023-53175
In the Linux kernel, the following vulnerability has been resolved:

PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation

When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.

Avoid the panic by checking if MSI-X/MSI is enabled.

🎖@cveNotify

🚨 CVE-2023-53176
In the Linux kernel, the following vulnerability has been resolved:

serial: 8250: Reinit port->pm on port specific driver unbind

When we unbind a serial port hardware specific 8250 driver, the generic
serial8250 driver takes over the port. After that we see an oops about 10
seconds later. This can produce the following at least on some TI SoCs:

Unhandled fault: imprecise external abort (0x1406)
Internal error: : 1406 [#1] SMP ARM

Turns out that we may still have the serial port hardware specific driver
port->pm in use, and serial8250_pm() tries to call it after the port
specific driver is gone:

serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base]
uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base]
uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c
__tty_hangup.part.0 from disassociate_ctty+0x154/0x20c
disassociate_ctty from do_exit+0x744/0xaac
do_exit from do_group_exit+0x40/0x8c
do_group_exit from __wake_up_parent+0x0/0x1c

Let's fix the issue by calling serial8250_set_defaults() in
serial8250_unregister_port(). This will set the port back to using
the serial8250 default functions, and sets the port->pm to point to
serial8250_pm.

🎖@cveNotify

🚨 CVE-2023-53177
In the Linux kernel, the following vulnerability has been resolved:

media: hi846: fix usage of pm_runtime_get_if_in_use()

pm_runtime_get_if_in_use() does not only return nonzero values when
the device is in use, it can return a negative errno too.

And especially during resuming from system suspend, when runtime pm
is not yet up again, -EAGAIN is being returned, so the subsequent
pm_runtime_put() call results in a refcount underflow.

Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use().

🎖@cveNotify

🚨 CVE-2025-13547
A flaw has been found in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. This affects an unknown part of the file /boafrm/formDdns. This manipulation of the argument submit-url causes memory corruption. The attack may be initiated remotely. The exploit has been published and may be used.

🎖@cveNotify

🚨 CVE-2025-13548
A vulnerability has been found in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. This vulnerability affects unknown code of the file /boafrm/formFirewallAdv. Such manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

🎖@cveNotify

🚨 CVE-2025-13549
A vulnerability was found in D-Link DIR-822K 1.00. This issue affects the function sub_455524 of the file /boafrm/formNtp. Performing manipulation of the argument submit-url results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

🎖@cveNotify

🚨 CVE-2025-13550
A vulnerability was determined in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. Impacted is an unknown function of the file /boafrm/formVpnConfigSetup. Executing manipulation of the argument submit-url can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

🎖@cveNotify

🚨 CVE-2025-13551
A vulnerability was identified in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. The affected element is an unknown function of the file /boafrm/formWanConfigSetup. The manipulation of the argument submit-url leads to buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

🎖@cveNotify

🚨 CVE-2025-13552
A security flaw has been discovered in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. The impacted element is an unknown function of the file /boafrm/formWlEncrypt. The manipulation of the argument submit-url results in buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be exploited.

🎖@cveNotify

🚨 CVE-2025-13387
The Kadence WooCommerce Email Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the customer name in all versions up to, and including, 1.5.17 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

🎖@cveNotify

🚨 CVE-2025-13606
The Export All Posts, Products, Orders, Refunds & Users plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.19. This is due to missing or incorrect nonce validation on the `parseData` function. This makes it possible for unauthenticated attackers to export sensitive information including user data, email addresses, password hashes, and WooCommerce data to an attacker-controlled file path on the server via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

🎖@cveNotify

🚨 CVE-2025-13000
The db-access WordPress plugin through 0.8.7 does not have authorization in an AJAX action, allowing any authenticated users, such as subscriber to perform SQLI attacks

🎖@cveNotify

🚨 CVE-2025-13001
The donation WordPress plugin through 1.0 does not sanitize and escape a parameter before using it in a SQL statement, allowing high privilege users, such as admin to perform SQL injection attacks

🎖@cveNotify

🚨 CVE-2025-12914
A vulnerability has been found in aaPanel BaoTa up to 11.2.x. This vulnerability affects unknown code of the file /database?action=GetDatabaseAccess of the component Backend. The manipulation of the argument Name leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 11.3.0 is able to resolve this issue. It is recommended to upgrade the affected component.

🎖@cveNotify

🚨 CVE-2025-12483
The Visualizer: Tables and Charts Manager for WordPress plugin for WordPress is vulnerable to SQL Injection via the 'query' parameter in all versions up to, and including, 3.11.12 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Version 3.11.13 raises the minimum user-level for exploitation to administrator. 3.11.14 fully patches the vulnerability.

🎖@cveNotify

🚨 CVE-2025-13007
The WP Social Ninja – Embed Social Feeds, Customer Reviews, Chat Widgets plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 3.20.3 due to insufficient input sanitization and output escaping on externally-sourced content. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page, granted they can post malicious content to a connected Google Business Profile or Facebook page.

🎖@cveNotify