๐จ CVE-2025-27151
Redis is an open source, in-memory database that persists on disk. In versions starting from 7.0.0 to before 8.0.2, a stack-based buffer overflow exists in redis-check-aof due to the use of memcpy with strlen(filepath) when copying a user-supplied file path into a fixed-size stack buffer. This allows an attacker to overflow the stack and potentially achieve code execution. This issue has been patched in version 8.0.2.
๐@cveNotify
Redis is an open source, in-memory database that persists on disk. In versions starting from 7.0.0 to before 8.0.2, a stack-based buffer overflow exists in redis-check-aof due to the use of memcpy with strlen(filepath) when copying a user-supplied file path into a fixed-size stack buffer. This allows an attacker to overflow the stack and potentially achieve code execution. This issue has been patched in version 8.0.2.
๐@cveNotify
GitHub
Check length of AOF file name in redis-check-aof (CVE-2025-27151) ยท redis/redis@643b5db
Ensure that the length of the input file name does not exceed PATH_MAX
๐จ CVE-2025-12143
Stack-based Buffer Overflow vulnerability in ABB Terra AC wallbox.This issue affects Terra AC wallbox: through 1.8.33.
๐@cveNotify
Stack-based Buffer Overflow vulnerability in ABB Terra AC wallbox.This issue affects Terra AC wallbox: through 1.8.33.
๐@cveNotify
๐จ CVE-2025-4953
A flaw was found in Podman. In a Containerfile or Podman, data written to RUN --mount=type=bind mounts during the podman build is not discarded. This issue can lead to files created within the container appearing in the temporary build context directory on the host, leaving the created files accessible.
๐@cveNotify
A flaw was found in Podman. In a Containerfile or Podman, data written to RUN --mount=type=bind mounts during the podman build is not discarded. This issue can lead to files created within the container appearing in the temporary build context directory on the host, leaving the created files accessible.
๐@cveNotify
๐จ CVE-2022-50170
In the Linux kernel, the following vulnerability has been resolved:
kunit: executor: Fix a memory leak on failure in kunit_filter_tests
It's possible that memory allocation for 'filtered' will fail, but for the
copy of the suite to succeed. In this case, the copy could be leaked.
Properly free 'copy' in the error case for the allocation of 'filtered'
failing.
Note that there may also have been a similar issue in
kunit_filter_subsuites, before it was removed in "kunit: flatten
kunit_suite*** to kunit_suite** in .kunit_test_suites".
This was reported by clang-analyzer via the kernel test robot, here:
https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/
And by smatch via Dan Carpenter and the kernel test robot:
https://lore.kernel.org/all/202207101328.ASjx88yj-lkp@intel.com/
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
kunit: executor: Fix a memory leak on failure in kunit_filter_tests
It's possible that memory allocation for 'filtered' will fail, but for the
copy of the suite to succeed. In this case, the copy could be leaked.
Properly free 'copy' in the error case for the allocation of 'filtered'
failing.
Note that there may also have been a similar issue in
kunit_filter_subsuites, before it was removed in "kunit: flatten
kunit_suite*** to kunit_suite** in .kunit_test_suites".
This was reported by clang-analyzer via the kernel test robot, here:
https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/
And by smatch via Dan Carpenter and the kernel test robot:
https://lore.kernel.org/all/202207101328.ASjx88yj-lkp@intel.com/
๐@cveNotify
๐จ CVE-2022-50171
In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec - don't sleep when in softirq
When kunpeng920 encryption driver is used to deencrypt and decrypt
packets during the softirq, it is not allowed to use mutex lock. The
kernel will report the following error:
BUG: scheduling while atomic: swapper/57/0/0x00000300
Call trace:
dump_backtrace+0x0/0x1e4
show_stack+0x20/0x2c
dump_stack+0xd8/0x140
__schedule_bug+0x68/0x80
__schedule+0x728/0x840
schedule+0x50/0xe0
schedule_preempt_disabled+0x18/0x24
__mutex_lock.constprop.0+0x594/0x5dc
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x50/0x60
sec_request_init+0x8c/0x1a0 [hisi_sec2]
sec_process+0x28/0x1ac [hisi_sec2]
sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2]
sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2]
crypto_skcipher_encrypt+0x2c/0x40
crypto_authenc_encrypt+0xc8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp_output_tail+0x348/0x5c0 [esp4]
esp_output+0x120/0x19c [esp4]
xfrm_output_one+0x25c/0x4d4
xfrm_output_resume+0x6c/0x1fc
xfrm_output+0xac/0x3c0
xfrm4_output+0x64/0x130
ip_build_and_send_pkt+0x158/0x20c
tcp_v4_send_synack+0xdc/0x1f0
tcp_conn_request+0x7d0/0x994
tcp_v4_conn_request+0x58/0x6c
tcp_v6_conn_request+0xf0/0x100
tcp_rcv_state_process+0x1cc/0xd60
tcp_v4_do_rcv+0x10c/0x250
tcp_v4_rcv+0xfc4/0x10a4
ip_protocol_deliver_rcu+0xf4/0x200
ip_local_deliver_finish+0x58/0x70
ip_local_deliver+0x68/0x120
ip_sublist_rcv_finish+0x70/0x94
ip_list_rcv_finish.constprop.0+0x17c/0x1d0
ip_sublist_rcv+0x40/0xb0
ip_list_rcv+0x140/0x1dc
__netif_receive_skb_list_core+0x154/0x28c
__netif_receive_skb_list+0x120/0x1a0
netif_receive_skb_list_internal+0xe4/0x1f0
napi_complete_done+0x70/0x1f0
gro_cell_poll+0x9c/0xb0
napi_poll+0xcc/0x264
net_rx_action+0xd4/0x21c
__do_softirq+0x130/0x358
irq_exit+0x11c/0x13c
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x78/0x2c0
el1_irq+0xb8/0x140
arch_cpu_idle+0x18/0x40
default_idle_call+0x5c/0x1c0
cpuidle_idle_call+0x174/0x1b0
do_idle+0xc8/0x160
cpu_startup_entry+0x30/0x11c
secondary_start_kernel+0x158/0x1e4
softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with
preempt_count 00000100, exited with fffffe00?
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec - don't sleep when in softirq
When kunpeng920 encryption driver is used to deencrypt and decrypt
packets during the softirq, it is not allowed to use mutex lock. The
kernel will report the following error:
BUG: scheduling while atomic: swapper/57/0/0x00000300
Call trace:
dump_backtrace+0x0/0x1e4
show_stack+0x20/0x2c
dump_stack+0xd8/0x140
__schedule_bug+0x68/0x80
__schedule+0x728/0x840
schedule+0x50/0xe0
schedule_preempt_disabled+0x18/0x24
__mutex_lock.constprop.0+0x594/0x5dc
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x50/0x60
sec_request_init+0x8c/0x1a0 [hisi_sec2]
sec_process+0x28/0x1ac [hisi_sec2]
sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2]
sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2]
crypto_skcipher_encrypt+0x2c/0x40
crypto_authenc_encrypt+0xc8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp_output_tail+0x348/0x5c0 [esp4]
esp_output+0x120/0x19c [esp4]
xfrm_output_one+0x25c/0x4d4
xfrm_output_resume+0x6c/0x1fc
xfrm_output+0xac/0x3c0
xfrm4_output+0x64/0x130
ip_build_and_send_pkt+0x158/0x20c
tcp_v4_send_synack+0xdc/0x1f0
tcp_conn_request+0x7d0/0x994
tcp_v4_conn_request+0x58/0x6c
tcp_v6_conn_request+0xf0/0x100
tcp_rcv_state_process+0x1cc/0xd60
tcp_v4_do_rcv+0x10c/0x250
tcp_v4_rcv+0xfc4/0x10a4
ip_protocol_deliver_rcu+0xf4/0x200
ip_local_deliver_finish+0x58/0x70
ip_local_deliver+0x68/0x120
ip_sublist_rcv_finish+0x70/0x94
ip_list_rcv_finish.constprop.0+0x17c/0x1d0
ip_sublist_rcv+0x40/0xb0
ip_list_rcv+0x140/0x1dc
__netif_receive_skb_list_core+0x154/0x28c
__netif_receive_skb_list+0x120/0x1a0
netif_receive_skb_list_internal+0xe4/0x1f0
napi_complete_done+0x70/0x1f0
gro_cell_poll+0x9c/0xb0
napi_poll+0xcc/0x264
net_rx_action+0xd4/0x21c
__do_softirq+0x130/0x358
irq_exit+0x11c/0x13c
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x78/0x2c0
el1_irq+0xb8/0x140
arch_cpu_idle+0x18/0x40
default_idle_call+0x5c/0x1c0
cpuidle_idle_call+0x174/0x1b0
do_idle+0xc8/0x160
cpu_startup_entry+0x30/0x11c
secondary_start_kernel+0x158/0x1e4
softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with
preempt_count 00000100, exited with fffffe00?
๐@cveNotify
๐จ CVE-2022-50172
In the Linux kernel, the following vulnerability has been resolved:
mt76: mt76x02u: fix possible memory leak in __mt76x02u_mcu_send_msg
Free the skb if mt76u_bulk_msg fails in __mt76x02u_mcu_send_msg routine.
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mt76: mt76x02u: fix possible memory leak in __mt76x02u_mcu_send_msg
Free the skb if mt76u_bulk_msg fails in __mt76x02u_mcu_send_msg routine.
๐@cveNotify
๐จ CVE-2022-50173
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/mdp5: Fix global state lock backoff
We need to grab the lock after the early return for !hwpipe case.
Otherwise, we could have hit contention yet still returned 0.
Fixes an issue that the new CONFIG_DRM_DEBUG_MODESET_LOCK stuff flagged
in CI:
WARNING: CPU: 0 PID: 282 at drivers/gpu/drm/drm_modeset_lock.c:296 drm_modeset_lock+0xf8/0x154
Modules linked in:
CPU: 0 PID: 282 Comm: kms_cursor_lega Tainted: G W 5.19.0-rc2-15930-g875cc8bc536a #1
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock+0xf8/0x154
lr : drm_atomic_get_private_obj_state+0x84/0x170
sp : ffff80000cfab6a0
x29: ffff80000cfab6a0 x28: 0000000000000000 x27: ffff000083bc4d00
x26: 0000000000000038 x25: 0000000000000000 x24: ffff80000957ca58
x23: 0000000000000000 x22: ffff000081ace080 x21: 0000000000000001
x20: ffff000081acec18 x19: ffff80000cfabb80 x18: 0000000000000038
x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffea0d0
x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47
x11: ffff80000a386aa8 x10: 0000000000000029 x9 : ffff80000cfab610
x8 : 0000000000000029 x7 : 0000000000000014 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff8000081ad904 x3 : 0000000000000029
x2 : ffff0000801db4c0 x1 : ffff80000cfabb80 x0 : ffff000081aceb58
Call trace:
drm_modeset_lock+0xf8/0x154
drm_atomic_get_private_obj_state+0x84/0x170
mdp5_get_global_state+0x54/0x6c
mdp5_pipe_release+0x2c/0xd4
mdp5_plane_atomic_check+0x2ec/0x414
drm_atomic_helper_check_planes+0xd8/0x210
drm_atomic_helper_check+0x54/0xb0
...
---[ end trace 0000000000000000 ]---
drm_modeset_lock attempting to lock a contended lock without backoff:
drm_modeset_lock+0x148/0x154
mdp5_get_global_state+0x30/0x6c
mdp5_pipe_release+0x2c/0xd4
mdp5_plane_atomic_check+0x290/0x414
drm_atomic_helper_check_planes+0xd8/0x210
drm_atomic_helper_check+0x54/0xb0
drm_atomic_check_only+0x4b0/0x8f4
drm_atomic_commit+0x68/0xe0
Patchwork: https://patchwork.freedesktop.org/patch/492701/
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/mdp5: Fix global state lock backoff
We need to grab the lock after the early return for !hwpipe case.
Otherwise, we could have hit contention yet still returned 0.
Fixes an issue that the new CONFIG_DRM_DEBUG_MODESET_LOCK stuff flagged
in CI:
WARNING: CPU: 0 PID: 282 at drivers/gpu/drm/drm_modeset_lock.c:296 drm_modeset_lock+0xf8/0x154
Modules linked in:
CPU: 0 PID: 282 Comm: kms_cursor_lega Tainted: G W 5.19.0-rc2-15930-g875cc8bc536a #1
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock+0xf8/0x154
lr : drm_atomic_get_private_obj_state+0x84/0x170
sp : ffff80000cfab6a0
x29: ffff80000cfab6a0 x28: 0000000000000000 x27: ffff000083bc4d00
x26: 0000000000000038 x25: 0000000000000000 x24: ffff80000957ca58
x23: 0000000000000000 x22: ffff000081ace080 x21: 0000000000000001
x20: ffff000081acec18 x19: ffff80000cfabb80 x18: 0000000000000038
x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffea0d0
x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47
x11: ffff80000a386aa8 x10: 0000000000000029 x9 : ffff80000cfab610
x8 : 0000000000000029 x7 : 0000000000000014 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff8000081ad904 x3 : 0000000000000029
x2 : ffff0000801db4c0 x1 : ffff80000cfabb80 x0 : ffff000081aceb58
Call trace:
drm_modeset_lock+0xf8/0x154
drm_atomic_get_private_obj_state+0x84/0x170
mdp5_get_global_state+0x54/0x6c
mdp5_pipe_release+0x2c/0xd4
mdp5_plane_atomic_check+0x2ec/0x414
drm_atomic_helper_check_planes+0xd8/0x210
drm_atomic_helper_check+0x54/0xb0
...
---[ end trace 0000000000000000 ]---
drm_modeset_lock attempting to lock a contended lock without backoff:
drm_modeset_lock+0x148/0x154
mdp5_get_global_state+0x30/0x6c
mdp5_pipe_release+0x2c/0xd4
mdp5_plane_atomic_check+0x290/0x414
drm_atomic_helper_check_planes+0xd8/0x210
drm_atomic_helper_check+0x54/0xb0
drm_atomic_check_only+0x4b0/0x8f4
drm_atomic_commit+0x68/0xe0
Patchwork: https://patchwork.freedesktop.org/patch/492701/
๐@cveNotify
๐จ CVE-2022-50174
In the Linux kernel, the following vulnerability has been resolved:
net: hinic: avoid kernel hung in hinic_get_stats64()
When using hinic device as a bond slave device, and reading device stats
of master bond device, the kernel may hung.
The kernel panic calltrace as follows:
Kernel panic - not syncing: softlockup: hung tasks
Call trace:
native_queued_spin_lock_slowpath+0x1ec/0x31c
dev_get_stats+0x60/0xcc
dev_seq_printf_stats+0x40/0x120
dev_seq_show+0x1c/0x40
seq_read_iter+0x3c8/0x4dc
seq_read+0xe0/0x130
proc_reg_read+0xa8/0xe0
vfs_read+0xb0/0x1d4
ksys_read+0x70/0xfc
__arm64_sys_read+0x20/0x30
el0_svc_common+0x88/0x234
do_el0_svc+0x2c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
And the calltrace of task that actually caused kernel hungs as follows:
__switch_to+124
__schedule+548
schedule+72
schedule_timeout+348
__down_common+188
__down+24
down+104
hinic_get_stats64+44 [hinic]
dev_get_stats+92
bond_get_stats+172 [bonding]
dev_get_stats+92
dev_seq_printf_stats+60
dev_seq_show+24
seq_read_iter+964
seq_read+220
proc_reg_read+164
vfs_read+172
ksys_read+108
__arm64_sys_read+28
el0_svc_common+132
do_el0_svc+40
el0_svc+24
el0_sync_handler+164
el0_sync+324
When getting device stats from bond, kernel will call bond_get_stats().
It first holds the spinlock bond->stats_lock, and then call
hinic_get_stats64() to collect hinic device's stats.
However, hinic_get_stats64() calls `down(&nic_dev->mgmt_lock)` to
protect its critical section, which may schedule current task out.
And if system is under high pressure, the task cannot be woken up
immediately, which eventually triggers kernel hung panic.
Since previous patch has replaced hinic_dev.tx_stats/rx_stats with local
variable in hinic_get_stats64(), there is nothing need to be protected
by lock, so just removing down()/up() is ok.
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
net: hinic: avoid kernel hung in hinic_get_stats64()
When using hinic device as a bond slave device, and reading device stats
of master bond device, the kernel may hung.
The kernel panic calltrace as follows:
Kernel panic - not syncing: softlockup: hung tasks
Call trace:
native_queued_spin_lock_slowpath+0x1ec/0x31c
dev_get_stats+0x60/0xcc
dev_seq_printf_stats+0x40/0x120
dev_seq_show+0x1c/0x40
seq_read_iter+0x3c8/0x4dc
seq_read+0xe0/0x130
proc_reg_read+0xa8/0xe0
vfs_read+0xb0/0x1d4
ksys_read+0x70/0xfc
__arm64_sys_read+0x20/0x30
el0_svc_common+0x88/0x234
do_el0_svc+0x2c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
And the calltrace of task that actually caused kernel hungs as follows:
__switch_to+124
__schedule+548
schedule+72
schedule_timeout+348
__down_common+188
__down+24
down+104
hinic_get_stats64+44 [hinic]
dev_get_stats+92
bond_get_stats+172 [bonding]
dev_get_stats+92
dev_seq_printf_stats+60
dev_seq_show+24
seq_read_iter+964
seq_read+220
proc_reg_read+164
vfs_read+172
ksys_read+108
__arm64_sys_read+28
el0_svc_common+132
do_el0_svc+40
el0_svc+24
el0_sync_handler+164
el0_sync+324
When getting device stats from bond, kernel will call bond_get_stats().
It first holds the spinlock bond->stats_lock, and then call
hinic_get_stats64() to collect hinic device's stats.
However, hinic_get_stats64() calls `down(&nic_dev->mgmt_lock)` to
protect its critical section, which may schedule current task out.
And if system is under high pressure, the task cannot be woken up
immediately, which eventually triggers kernel hung panic.
Since previous patch has replaced hinic_dev.tx_stats/rx_stats with local
variable in hinic_get_stats64(), there is nothing need to be protected
by lock, so just removing down()/up() is ok.
๐@cveNotify
๐จ CVE-2022-50175
In the Linux kernel, the following vulnerability has been resolved:
media: tw686x: Fix memory leak in tw686x_video_init
video_device_alloc() allocates memory for vdev,
when video_register_device() fails, it doesn't release the memory and
leads to memory leak, call video_device_release() to fix this.
๐@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
media: tw686x: Fix memory leak in tw686x_video_init
video_device_alloc() allocates memory for vdev,
when video_register_device() fails, it doesn't release the memory and
leads to memory leak, call video_device_release() to fix this.
๐@cveNotify
๐จ CVE-2025-59054
dstack is a software development kit (SDK) to simplify the deployment of arbitrary containerized apps into trusted execution environments. In versions of dstack prior to 0.5.4, a malicious host may provide a crafted LUKS2 data volume to a dstack CVM for use as the `/data` mount. The guest will open the volume and write secret data using a volume key known to the attacker, causing disclosure of Wireguard keys and other secret information. The attacker can also pre-load data on the device, which could potentially compromise guest execution. LUKS2 volume metadata is not authenticated and supports null key-encryption algorithms, allowing an attacker to create a volume such that the volume opens (cryptsetup open) without error using any passphrase or token, records all writes in plaintext (or ciphertext with an attacker-known key), and/or contains arbitrary data chosen by the attacker. Version 0.5.4 of dstack contains a patch that addresses LUKS headers.
๐@cveNotify
dstack is a software development kit (SDK) to simplify the deployment of arbitrary containerized apps into trusted execution environments. In versions of dstack prior to 0.5.4, a malicious host may provide a crafted LUKS2 data volume to a dstack CVM for use as the `/data` mount. The guest will open the volume and write secret data using a volume key known to the attacker, causing disclosure of Wireguard keys and other secret information. The attacker can also pre-load data on the device, which could potentially compromise guest execution. LUKS2 volume metadata is not authenticated and supports null key-encryption algorithms, allowing an attacker to create a volume such that the volume opens (cryptsetup open) without error using any passphrase or token, records all writes in plaintext (or ciphertext with an attacker-known key), and/or contains arbitrary data chosen by the attacker. Version 0.5.4 of dstack contains a patch that addresses LUKS headers.
๐@cveNotify
GitHub
dstack/dstack-util/src/system_setup.rs at 04de4e422bb06f075b4215b2cfc410f5d7ac7aed ยท Dstack-TEE/dstack
Deploy any app to TEE. Contribute to Dstack-TEE/dstack development by creating an account on GitHub.
๐จ CVE-2025-58356
Constellation is the first Confidential Kubernetes. The Constellation CVM image uses LUKS2-encrypted volumes for persistent storage. When opening an encrypted storage device, the CVM uses the libcryptsetup function crypt_activate_by_passhrase. If the VM is successful in opening the partition with the disk encryption key, it treats the volume as confidential. However, due to the unsafe handling of null keyslot algorithms in the cryptsetup 2.8.1, it is possible that the opened volume is not encrypted at all. Cryptsetup prior to version 2.8.1 does not report an error when processing LUKS2-formatted disks that use the cipher_null-ecb algorithm in the keyslot encryption field. This vulnerability is fixed in 2.24.0.
๐@cveNotify
Constellation is the first Confidential Kubernetes. The Constellation CVM image uses LUKS2-encrypted volumes for persistent storage. When opening an encrypted storage device, the CVM uses the libcryptsetup function crypt_activate_by_passhrase. If the VM is successful in opening the partition with the disk encryption key, it treats the volume as confidential. However, due to the unsafe handling of null keyslot algorithms in the cryptsetup 2.8.1, it is possible that the opened volume is not encrypted at all. Cryptsetup prior to version 2.8.1 does not report an error when processing LUKS2-formatted disks that use the cipher_null-ecb algorithm in the keyslot encryption field. This vulnerability is fixed in 2.24.0.
๐@cveNotify
GitHub
cryptsetup: enable detached header by daniel-weisse ยท Pull Request #3927 ยท edgelesssys/constellation
Context
Proposed change(s)
Enable the use of detached headers for state disks
Additional info
AB#6025
e2e tests
GCP
Azure
AWS
upgrade test on GCP
Proposed change(s)
Enable the use of detached headers for state disks
Additional info
AB#6025
e2e tests
GCP
Azure
AWS
upgrade test on GCP
๐จ CVE-2025-12969
Fluent Bit in_forward input plugin does not properly enforce the security.users authentication mechanism under certain configuration conditions. This allows remote attackers with network access to the Fluent Bit instance exposing the forward input to send unauthenticated data. By bypassing authentication controls, attackers can inject forged log records, flood alerting systems, or manipulate routing decisions, compromising the authenticity and integrity of ingested logs.
๐@cveNotify
Fluent Bit in_forward input plugin does not properly enforce the security.users authentication mechanism under certain configuration conditions. This allows remote attackers with network access to the Fluent Bit instance exposing the forward input to send unauthenticated data. By bypassing authentication controls, attackers can inject forged log records, flood alerting systems, or manipulate routing decisions, compromising the authenticity and integrity of ingested logs.
๐@cveNotify
fluentbit.io
v4.1.0
Next generation Telemetry Agent for Logs, Metrics and Traces.
๐จ CVE-2025-12970
The extract_name function in Fluent Bit in_docker input plugin copies container names into a fixed size stack buffer without validating length. An attacker who can create containers or control container names, can supply a long name that overflows the buffer, leading to process crash or arbitrary code execution.
๐@cveNotify
The extract_name function in Fluent Bit in_docker input plugin copies container names into a fixed size stack buffer without validating length. An attacker who can create containers or control container names, can supply a long name that overflows the buffer, leading to process crash or arbitrary code execution.
๐@cveNotify
fluentbit.io
v4.1.0
Next generation Telemetry Agent for Logs, Metrics and Traces.
๐จ CVE-2025-12972
Fluent Bit out_file plugin does not properly sanitize tag values when deriving output file names. When the File option is omitted, the plugin uses untrusted tag input to construct file paths. This allows attackers with network access to craft tags containing path traversal sequences that cause Fluent Bit to write files outside the intended output directory.
๐@cveNotify
Fluent Bit out_file plugin does not properly sanitize tag values when deriving output file names. When the File option is omitted, the plugin uses untrusted tag input to construct file paths. This allows attackers with network access to craft tags containing path traversal sequences that cause Fluent Bit to write files outside the intended output directory.
๐@cveNotify
fluentbit.io
v4.1.0
Next generation Telemetry Agent for Logs, Metrics and Traces.
๐จ CVE-2025-12977
Fluent Bit in_http, in_splunk, and in_elasticsearch input plugins fail to sanitize tag_key inputs. An attacker with network access or the ability to write records into Splunk or Elasticsearch can supply tag_key values containing special characters such as newlines or ../ that are treated as valid tags. Because tags influence routing and some outputs derive filenames or contents from tags, this can allow newline injection, path traversal, forged record injection, or log misrouting, impacting data integrity and log routing.
๐@cveNotify
Fluent Bit in_http, in_splunk, and in_elasticsearch input plugins fail to sanitize tag_key inputs. An attacker with network access or the ability to write records into Splunk or Elasticsearch can supply tag_key values containing special characters such as newlines or ../ that are treated as valid tags. Because tags influence routing and some outputs derive filenames or contents from tags, this can allow newline injection, path traversal, forged record injection, or log misrouting, impacting data integrity and log routing.
๐@cveNotify
fluentbit.io
v4.1.0
Next generation Telemetry Agent for Logs, Metrics and Traces.
๐จ CVE-2025-12978
Fluent Bit in_http, in_splunk, and in_elasticsearch input plugins contain a flaw in the tag_key validation logic that fails to enforce exact key-length matching. This allows crafted inputs where a tag prefix is incorrectly treated as a full match. A remote attacker with authenticated or exposed access to these input endpoints can exploit this behavior to manipulate tags and redirect records to unintended destinations. This compromises the authenticity of ingested logs and can allow injection of forged data, alert flooding and routing manipulation.
๐@cveNotify
Fluent Bit in_http, in_splunk, and in_elasticsearch input plugins contain a flaw in the tag_key validation logic that fails to enforce exact key-length matching. This allows crafted inputs where a tag prefix is incorrectly treated as a full match. A remote attacker with authenticated or exposed access to these input endpoints can exploit this behavior to manipulate tags and redirect records to unintended destinations. This compromises the authenticity of ingested logs and can allow injection of forged data, alert flooding and routing manipulation.
๐@cveNotify
fluentbit.io
v4.1.0
Next generation Telemetry Agent for Logs, Metrics and Traces.
๐จ CVE-2025-26155
NCP Secure Enterprise Client 13.18 and NCP Secure Entry Windows Client 13.19 have an Untrusted Search Path vulnerability.
๐@cveNotify
NCP Secure Enterprise Client 13.18 and NCP Secure Entry Windows Client 13.19 have an Untrusted Search Path vulnerability.
๐@cveNotify
๐จ CVE-2025-50433
An issue was discovered in imonnit.com (2025-04-24) allowing malicious actors to gain escalated privileges via crafted password reset to take over arbitrary user accounts.
๐@cveNotify
An issue was discovered in imonnit.com (2025-04-24) allowing malicious actors to gain escalated privileges via crafted password reset to take over arbitrary user accounts.
๐@cveNotify
๐จ CVE-2025-65670
An Insecure Direct Object Reference (IDOR) in classroomio 0.1.13 allows students to access sensitive admin/teacher endpoints by manipulating course IDs in URLs, resulting in unauthorized disclosure of sensitive course, admin, and student data. The leak occurs momentarily before the system reverts to a normal state restricting access.
๐@cveNotify
An Insecure Direct Object Reference (IDOR) in classroomio 0.1.13 allows students to access sensitive admin/teacher endpoints by manipulating course IDs in URLs, resulting in unauthorized disclosure of sensitive course, admin, and student data. The leak occurs momentarily before the system reverts to a normal state restricting access.
๐@cveNotify
ClassroomIO
ClassroomIO | The Open Source Learning Management System for Companies
A flexible, user-friendly platform for creating, managing, and delivering courses for companies and training organisations
๐จ CVE-2025-65202
TRENDnet TEW-657BRM 1.00.1 has an authenticated remote OS command injection vulnerability in the setup.cgi binary, exploitable via the HTTP parameters "command", "todo", and "next_file," which allows an attacker to execute arbitrary commands with root privileges.
๐@cveNotify
TRENDnet TEW-657BRM 1.00.1 has an authenticated remote OS command injection vulnerability in the setup.cgi binary, exploitable via the HTTP parameters "command", "todo", and "next_file," which allows an attacker to execute arbitrary commands with root privileges.
๐@cveNotify
GitHub
GitHub - WhereisRain/TEW-657BRM
Contribute to WhereisRain/TEW-657BRM development by creating an account on GitHub.
๐จ CVE-2025-59302
In Apache CloudStack improper control of generation of code ('Code Injection') vulnerability is found in the following APIs which are accessible only to admins.
* quotaTariffCreate
* quotaTariffUpdate
* createSecondaryStorageSelector
* updateSecondaryStorageSelector
* updateHost
* updateStorage
This issue affects Apache CloudStack: from 4.18.0 before 4.20.2, from 4.21.0 before 4.22.0. Users are recommended to upgrade to versions 4.20.2 or 4.22.0, which contain the fix.
The fix introduces a new global configuration flag, js.interpretation.enabled, allowing administrators to control the interpretation of JavaScript expressions in these APIs, thereby mitigating the code injection risk.
๐@cveNotify
In Apache CloudStack improper control of generation of code ('Code Injection') vulnerability is found in the following APIs which are accessible only to admins.
* quotaTariffCreate
* quotaTariffUpdate
* createSecondaryStorageSelector
* updateSecondaryStorageSelector
* updateHost
* updateStorage
This issue affects Apache CloudStack: from 4.18.0 before 4.20.2, from 4.21.0 before 4.22.0. Users are recommended to upgrade to versions 4.20.2 or 4.22.0, which contain the fix.
The fix introduces a new global configuration flag, js.interpretation.enabled, allowing administrators to control the interpretation of JavaScript expressions in these APIs, thereby mitigating the code injection risk.
๐@cveNotify