🚨 CVE-2025-39784
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix link speed calculation on retrain failure
When pcie_failed_link_retrain() fails to retrain, it tries to revert to the
previous link speed. However it calculates that speed from the Link
Control 2 register without masking out non-speed bits first.
PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to
PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in
pcie_set_target_speed():
pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s
pci 0000:00:01.1: retraining failed
WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed
RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000
pcie_failed_link_retrain
pci_device_add
pci_scan_single_device
Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and
PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN.
[bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix link speed calculation on retrain failure
When pcie_failed_link_retrain() fails to retrain, it tries to revert to the
previous link speed. However it calculates that speed from the Link
Control 2 register without masking out non-speed bits first.
PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to
PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in
pcie_set_target_speed():
pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s
pci 0000:00:01.1: retraining failed
WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed
RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000
pcie_failed_link_retrain
pci_device_add
pci_scan_single_device
Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and
PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN.
[bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de]
🎖@cveNotify
🚨 CVE-2025-39785
In the Linux kernel, the following vulnerability has been resolved:
drm/hisilicon/hibmc: fix irq_request()'s irq name variable is local
The local variable is passed in request_irq (), and there will be use
after free problem, which will make request_irq failed. Using the global
irq name instead of it to fix.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/hisilicon/hibmc: fix irq_request()'s irq name variable is local
The local variable is passed in request_irq (), and there will be use
after free problem, which will make request_irq failed. Using the global
irq name instead of it to fix.
🎖@cveNotify
🚨 CVE-2025-39786
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7173: fix channels index for syscalib_mode
Fix the index used to look up the channel when accessing the
syscalib_mode attribute. The address field is a 0-based index (same
as scan_index) that it used to access the channel in the
ad7173_channels array throughout the driver. The channels field, on
the other hand, may not match the address field depending on the
channel configuration specified in the device tree and could result
in an out-of-bounds access.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7173: fix channels index for syscalib_mode
Fix the index used to look up the channel when accessing the
syscalib_mode attribute. The address field is a 0-based index (same
as scan_index) that it used to access the channel in the
ad7173_channels array throughout the driver. The channels field, on
the other hand, may not match the address field depending on the
channel configuration specified in the device tree and could result
in an out-of-bounds access.
🎖@cveNotify
🚨 CVE-2025-53092
Strapi is an open source headless content management system. Strapi versions prior to 5.20.0 contain a CORS misconfiguration vulnerability in default installations. By default, Strapi reflects the value of the Origin header back in the Access-Control-Allow-Origin response header without proper validation or whitelisting. This allows an attacker-controlled site to send credentialed requests to the Strapi backend. An attacker can exploit this by hosting a malicious site on a different origin (e.g., different port) and sending requests with credentials to the Strapi API. The vulnerability is fixed in version 5.20.0. No known workarounds exist.
🎖@cveNotify
Strapi is an open source headless content management system. Strapi versions prior to 5.20.0 contain a CORS misconfiguration vulnerability in default installations. By default, Strapi reflects the value of the Origin header back in the Access-Control-Allow-Origin response header without proper validation or whitelisting. This allows an attacker-controlled site to send credentialed requests to the Strapi backend. An attacker can exploit this by hosting a malicious site on a different origin (e.g., different port) and sending requests with credentials to the Strapi API. The vulnerability is fixed in version 5.20.0. No known workarounds exist.
🎖@cveNotify
GitHub
CORS Misconfiguration Leads to Sensitive Data Exposure
### Summary
A CORS misconfiguration vulnerability exists in default installations of Strapi where attacker-controlled origins are improperly reflected in API responses.
### Technical Details ...
A CORS misconfiguration vulnerability exists in default installations of Strapi where attacker-controlled origins are improperly reflected in API responses.
### Technical Details ...
🚨 CVE-2025-39777
In the Linux kernel, the following vulnerability has been resolved:
crypto: acomp - Fix CFI failure due to type punning
To avoid a crash when control flow integrity is enabled, make the
workspace ("stream") free function use a consistent type, and call it
through a function pointer that has that same type.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
crypto: acomp - Fix CFI failure due to type punning
To avoid a crash when control flow integrity is enabled, make the
workspace ("stream") free function use a consistent type, and call it
through a function pointer that has that same type.
🎖@cveNotify
🔥1
🚨 CVE-2024-34525
FileCodeBox 2.0 stores a OneDrive password and AWS key in a cleartext env file.
🎖@cveNotify
FileCodeBox 2.0 stores a OneDrive password and AWS key in a cleartext env file.
🎖@cveNotify
GitHub
Potential Information Leakage · Issue #133 · vastsa/FileCodeBox
Describe the bug In the settings' __init__ function, it stores sensitive data including onedrive password, AWS key into a plaintext env file which is a potential security issue described in CWE...
🚨 CVE-2023-6327
The ShopLentor (formerly WooLentor) plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the purchased_new_products function in all versions up to, and including, 2.8.7. This makes it possible for unauthenticated attackers to view all products purchased in the past week, along with the users that purchased them.
🎖@cveNotify
The ShopLentor (formerly WooLentor) plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the purchased_new_products function in all versions up to, and including, 2.8.7. This makes it possible for unauthenticated attackers to view all products purchased in the past week, along with the users that purchased them.
🎖@cveNotify
🚨 CVE-2024-32830
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in ThemeKraft BuddyForms allows Server Side Request Forgery, Relative Path Traversal.This issue affects BuddyForms: from n/a through 2.8.8.
🎖@cveNotify
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in ThemeKraft BuddyForms allows Server Side Request Forgery, Relative Path Traversal.This issue affects BuddyForms: from n/a through 2.8.8.
🎖@cveNotify
Patchstack
Arbitrary File Download in WordPress BuddyForms Plugin
Patchstack is the leading open source vulnerability research organization. Find information and protection for all WordPress, Drupal and Joomla security issues.
🚨 CVE-2024-3345
The ShopLentor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's woolentorsearch shortcode in all versions up to, and including, 2.8.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
🎖@cveNotify
The ShopLentor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's woolentorsearch shortcode in all versions up to, and including, 2.8.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
🎖@cveNotify
🚨 CVE-2025-2584
A vulnerability was found in WebAssembly wabt 1.0.36. It has been declared as critical. This vulnerability affects the function BinaryReaderInterp::GetReturnCallDropKeepCount of the file wabt/src/interp/binary-reader-interp.cc. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.
🎖@cveNotify
A vulnerability was found in WebAssembly wabt 1.0.36. It has been declared as critical. This vulnerability affects the function BinaryReaderInterp::GetReturnCallDropKeepCount of the file wabt/src/interp/binary-reader-interp.cc. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.
🎖@cveNotify
GitHub
A Heap-based Buffer Overflow in wabt::interp::(anonymous namespace)::BinaryReaderInterp::GetReturnCallDropKeepCount · Issue #2557…
Affected Projects wabt v1.0.36 (https://github.com/WebAssembly/wabt) Problem Type CWE-122: Heap-based Buffer Overflow Description Details A heap-buffer-overflow vulnerability arises in the wabt::in...
🚨 CVE-2025-39771
In the Linux kernel, the following vulnerability has been resolved:
regulator: pca9450: Use devm_register_sys_off_handler
With module test, there is error dump:
------------[ cut here ]------------
notifier callback pca9450_i2c_restart_handler already registered
WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88,
CPU#0: kworker/u16:3/50
Call trace:
notifier_chain_register+0x5c/0x88 (P)
atomic_notifier_chain_register+0x30/0x58
register_restart_handler+0x1c/0x28
pca9450_i2c_probe+0x418/0x538
i2c_device_probe+0x220/0x3d0
really_probe+0x114/0x410
__driver_probe_device+0xa0/0x150
driver_probe_device+0x40/0x114
__device_attach_driver+0xd4/0x12c
So use devm_register_sys_off_handler to let kernel handle the resource
free to avoid kernel dump.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
regulator: pca9450: Use devm_register_sys_off_handler
With module test, there is error dump:
------------[ cut here ]------------
notifier callback pca9450_i2c_restart_handler already registered
WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88,
CPU#0: kworker/u16:3/50
Call trace:
notifier_chain_register+0x5c/0x88 (P)
atomic_notifier_chain_register+0x30/0x58
register_restart_handler+0x1c/0x28
pca9450_i2c_probe+0x418/0x538
i2c_device_probe+0x220/0x3d0
really_probe+0x114/0x410
__driver_probe_device+0xa0/0x150
driver_probe_device+0x40/0x114
__device_attach_driver+0xd4/0x12c
So use devm_register_sys_off_handler to let kernel handle the resource
free to avoid kernel dump.
🎖@cveNotify
🚨 CVE-2025-39774
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
When stress-testing the system by repeatedly unbinding and binding the ADC
device in a loop, and the ADC is a supplier for another device (e.g., a
thermal hardware block that reads temperature through the ADC), it may
happen that the ADC device is runtime-resumed immediately after runtime PM
is enabled, triggered by its consumer. At this point, since drvdata is not
yet set and the driver's runtime PM callbacks rely on it, a crash can
occur. To avoid this, set drvdata just after it was allocated.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
When stress-testing the system by repeatedly unbinding and binding the ADC
device in a loop, and the ADC is a supplier for another device (e.g., a
thermal hardware block that reads temperature through the ADC), it may
happen that the ADC device is runtime-resumed immediately after runtime PM
is enabled, triggered by its consumer. At this point, since drvdata is not
yet set and the driver's runtime PM callbacks rely on it, a crash can
occur. To avoid this, set drvdata just after it was allocated.
🎖@cveNotify
🔥1
🚨 CVE-2024-47377
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in ThemeKraft BuddyForms allows Stored XSS.This issue affects BuddyForms: from n/a through 2.8.12.
🎖@cveNotify
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in ThemeKraft BuddyForms allows Stored XSS.This issue affects BuddyForms: from n/a through 2.8.12.
🎖@cveNotify
Patchstack
Cross Site Scripting (XSS) in WordPress BuddyForms Plugin
Patchstack is the leading open source vulnerability research organization. Find information and protection for all WordPress, Drupal and Joomla security issues.
🚨 CVE-2024-9538
The ShopLentor plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.9.8 via the 'render' function in includes/addons/wl_faq.php. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive private, pending, and draft Elementor template data.
🎖@cveNotify
The ShopLentor plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.9.8 via the 'render' function in includes/addons/wl_faq.php. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive private, pending, and draft Elementor template data.
🎖@cveNotify
🚨 CVE-2022-50176
In the Linux kernel, the following vulnerability has been resolved:
drm/mcde: Fix refcount leak in mcde_dsi_bind
Every iteration of for_each_available_child_of_node() decrements
the reference counter of the previous node. There is no decrement
when break out from the loop and results in refcount leak.
Add missing of_node_put() to fix this.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
drm/mcde: Fix refcount leak in mcde_dsi_bind
Every iteration of for_each_available_child_of_node() decrements
the reference counter of the previous node. There is no decrement
when break out from the loop and results in refcount leak.
Add missing of_node_put() to fix this.
🎖@cveNotify
🚨 CVE-2025-39763
In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
If a synchronous error is detected as a result of user-space process
triggering a 2-bit uncorrected error, the CPU will take a synchronous
error exception such as Synchronous External Abort (SEA) on Arm64. The
kernel will queue a memory_failure() work which poisons the related
page, unmaps the page, and then sends a SIGBUS to the process, so that
a system wide panic can be avoided.
However, no memory_failure() work will be queued when abnormal
synchronous errors occur. These errors can include situations like
invalid PA, unexpected severity, no memory failure config support,
invalid GUID section, etc. In such a case, the user-space process will
trigger SEA again. This loop can potentially exceed the platform
firmware threshold or even trigger a kernel hard lockup, leading to a
system reboot.
Fix it by performing a force kill if no memory_failure() work is queued
for synchronous errors.
[ rjw: Changelog edits ]
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
If a synchronous error is detected as a result of user-space process
triggering a 2-bit uncorrected error, the CPU will take a synchronous
error exception such as Synchronous External Abort (SEA) on Arm64. The
kernel will queue a memory_failure() work which poisons the related
page, unmaps the page, and then sends a SIGBUS to the process, so that
a system wide panic can be avoided.
However, no memory_failure() work will be queued when abnormal
synchronous errors occur. These errors can include situations like
invalid PA, unexpected severity, no memory failure config support,
invalid GUID section, etc. In such a case, the user-space process will
trigger SEA again. This loop can potentially exceed the platform
firmware threshold or even trigger a kernel hard lockup, leading to a
system reboot.
Fix it by performing a force kill if no memory_failure() work is queued
for synchronous errors.
[ rjw: Changelog edits ]
🎖@cveNotify
🚨 CVE-2025-39764
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: remove refcounting in expectation dumpers
Same pattern as previous patch: do not keep the expectation object
alive via refcount, only store a cookie value and then use that
as the skip hint for dump resumption.
AFAICS this has the same issue as the one resolved in the conntrack
dumper, when we do
if (!refcount_inc_not_zero(&exp->use))
to increment the refcount, there is a chance that exp == last, which
causes a double-increment of the refcount and subsequent memory leak.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: remove refcounting in expectation dumpers
Same pattern as previous patch: do not keep the expectation object
alive via refcount, only store a cookie value and then use that
as the skip hint for dump resumption.
AFAICS this has the same issue as the one resolved in the conntrack
dumper, when we do
if (!refcount_inc_not_zero(&exp->use))
to increment the refcount, there is a chance that exp == last, which
causes a double-increment of the refcount and subsequent memory leak.
🎖@cveNotify
🚨 CVE-2024-4566
The ShopLentor plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the ajax_dismiss function in all versions up to, and including, 2.8.8. This makes it possible for authenticated attackers, with contributor-level access and above, to set arbitrary WordPress options to "true". NOTE: This vulnerability can be exploited by attackers with subscriber- or customer-level access and above if (1) the WooCommerce plugin is deactivated or (2) access to the default WordPress admin dashboard is explicitly enabled for authenticated users.
🎖@cveNotify
The ShopLentor plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the ajax_dismiss function in all versions up to, and including, 2.8.8. This makes it possible for authenticated attackers, with contributor-level access and above, to set arbitrary WordPress options to "true". NOTE: This vulnerability can be exploited by attackers with subscriber- or customer-level access and above if (1) the WooCommerce plugin is deactivated or (2) access to the default WordPress admin dashboard is explicitly enabled for authenticated users.
🎖@cveNotify
🚨 CVE-2024-34767
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in HasThemes ShopLentor allows Stored XSS.This issue affects ShopLentor: from n/a through 2.8.7.
🎖@cveNotify
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in HasThemes ShopLentor allows Stored XSS.This issue affects ShopLentor: from n/a through 2.8.7.
🎖@cveNotify
Patchstack
Cross Site Scripting (XSS) in WordPress ShopLentor Plugin
Patchstack is the leading open source vulnerability research organization. Find information and protection for all WordPress, Drupal and Joomla security issues.
🚨 CVE-2024-32983
Misskey is an open source, decentralized microblogging platform. Misskey doesn't perform proper normalization on the JSON structures of incoming signed ActivityPub activity objects before processing them, allowing threat actors to spoof the contents of signed activities and impersonate the authors of the original activities. This vulnerability is fixed in 2024.5.0.
🎖@cveNotify
Misskey is an open source, decentralized microblogging platform. Misskey doesn't perform proper normalization on the JSON structures of incoming signed ActivityPub activity objects before processing them, allowing threat actors to spoof the contents of signed activities and impersonate the authors of the original activities. This vulnerability is fixed in 2024.5.0.
🎖@cveNotify
GitHub
Merge pull request from GHSA-2vxv-pv3m-3wvj · misskey-dev/misskey@d2a5bb3
* fix: normalize incoming signed activities
* Tweak style
* Update CHANGELOG.md
* Log compacted activity as well
---------
Co-authored-by: syuilo <4439005+syuilo@users.noreply.github.com>
* Tweak style
* Update CHANGELOG.md
* Log compacted activity as well
---------
Co-authored-by: syuilo <4439005+syuilo@users.noreply.github.com>
🚨 CVE-2024-5530
The ShopLentor – WooCommerce Builder for Elementor & Gutenberg +12 Modules – All in One Solution (formerly WooLentor) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's WL: Product Horizontal Filter widget in all versions up to, and including, 2.9.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
🎖@cveNotify
The ShopLentor – WooCommerce Builder for Elementor & Gutenberg +12 Modules – All in One Solution (formerly WooLentor) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's WL: Product Horizontal Filter widget in all versions up to, and including, 2.9.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
🎖@cveNotify