🚨 CVE-2022-50186
In the Linux kernel, the following vulnerability has been resolved:

ath11k: fix missing skb drop on htc_tx_completion error

On htc_tx_completion error the skb is not dropped. This is wrong since
the completion_handler logic expect the skb to be consumed anyway even
when an error is triggered. Not freeing the skb on error is a memory
leak since the skb won't be freed anywere else. Correctly free the
packet on eid >= ATH11K_HTC_EP_COUNT before returning.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1

🎖@cveNotify

🚨 CVE-2022-50187
In the Linux kernel, the following vulnerability has been resolved:

ath11k: fix netdev open race

Make sure to allocate resources needed before registering the device.

This specifically avoids having a racing open() trigger a BUG_ON() in
mod_timer() when ath11k_mac_op_start() is called before the
mon_reap_timer as been set up.

I did not see this issue with next-20220310, but I hit it on every probe
with next-20220511. Perhaps some timing changed in between.

Here's the backtrace:

[ 51.346947] kernel BUG at kernel/time/timer.c:990!
[ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
...
[ 51.578225] Call trace:
[ 51.583293] __mod_timer+0x298/0x390
[ 51.589518] mod_timer+0x14/0x20
[ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k]
[ 51.603165] drv_start+0x38/0x60 [mac80211]
[ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211]
[ 51.617945] ieee80211_open+0x60/0xb0 [mac80211]
[ 51.625311] __dev_open+0x100/0x1c0
[ 51.631420] __dev_change_flags+0x194/0x210
[ 51.638214] dev_change_flags+0x24/0x70
[ 51.644646] do_setlink+0x228/0xdb0
[ 51.650723] __rtnl_newlink+0x460/0x830
[ 51.657162] rtnl_newlink+0x4c/0x80
[ 51.663229] rtnetlink_rcv_msg+0x124/0x390
[ 51.669917] netlink_rcv_skb+0x58/0x130
[ 51.676314] rtnetlink_rcv+0x18/0x30
[ 51.682460] netlink_unicast+0x250/0x310
[ 51.688960] netlink_sendmsg+0x19c/0x3e0
[ 51.695458] ____sys_sendmsg+0x220/0x290
[ 51.701938] ___sys_sendmsg+0x7c/0xc0
[ 51.708148] __sys_sendmsg+0x68/0xd0
[ 51.714254] __arm64_sys_sendmsg+0x28/0x40
[ 51.720900] invoke_syscall+0x48/0x120

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

🎖@cveNotify

🚨 CVE-2022-50188
In the Linux kernel, the following vulnerability has been resolved:

drm/meson: Fix refcount leak in meson_encoder_hdmi_init

of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() in error path to avoid refcount
leak.

🎖@cveNotify

🚨 CVE-2022-50190
In the Linux kernel, the following vulnerability has been resolved:

spi: Fix simplification of devm_spi_register_controller

This reverts commit 59ebbe40fb51 ("spi: simplify
devm_spi_register_controller").

If devm_add_action() fails in devm_add_action_or_reset(),
devm_spi_unregister() will be called, it decreases the
refcount of 'ctlr->dev' to 0, then it will cause uaf in
the drivers that calling spi_put_controller() in error path.

🎖@cveNotify

🚨 CVE-2022-50191
In the Linux kernel, the following vulnerability has been resolved:

regulator: of: Fix refcount leak bug in of_get_regulation_constraints()

We should call the of_node_put() for the reference returned by
of_get_child_by_name() which has increased the refcount.

🎖@cveNotify

🚨 CVE-2022-50192
In the Linux kernel, the following vulnerability has been resolved:

spi: tegra20-slink: fix UAF in tegra_slink_remove()

After calling spi_unregister_master(), the refcount of master will
be decrease to 0, and it will be freed in spi_controller_release(),
the device data also will be freed, so it will lead a UAF when using
'tspi'. To fix this, get the master before unregister and put it when
finish using it.

🎖@cveNotify

🚨 CVE-2015-6867
The vertica-udx-zygote process in HP Vertica 7.1.1 UDx does not require authentication, which allows remote attackers to execute arbitrary commands via a crafted packet, aka ZDI-CAN-2914.

🎖@cveNotify

🚨 CVE-2016-2002
The validateAdminConfig handler in the Analytics Management Console in HPE Vertica 7.0.x before 7.0.2.12, 7.1.x before 7.1.2-12, and 7.2.x before 7.2.2-1 allows remote attackers to execute arbitrary commands via the mcPort parameter, aka ZDI-CAN-3417.

🎖@cveNotify

🚨 CVE-2022-50209
In the Linux kernel, the following vulnerability has been resolved:

meson-mx-socinfo: Fix refcount leak in meson_mx_socinfo_init

of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

🎖@cveNotify

🚨 CVE-2017-5802
A Remote Gain Privileged Access vulnerability in HPE Vertica Analytics Platform version v4.1 and later was found.

🎖@cveNotify

🚨 CVE-2024-6360
Incorrect Permission Assignment for Critical Resource vulnerability in OpenText™ Vertica could allow Privilege Abuse and result in unauthorized access or privileges to Vertica agent apikey.
This issue affects Vertica: from 10.0 through 10.X, from 11.0 through 11.X, from 12.0 through 12.X, from 23.0 through 23.X, from 24.0 through 24.X.

🎖@cveNotify

🚨 CVE-2024-35281
An improper isolation or compartmentalization vulnerability [CWE-653] in FortiClientMac version 7.4.2 and below, version 7.2.8 and below, 7.0 all versions and FortiVoiceUCDesktop 3.0 all versions desktop application may allow an authenticated attacker to inject code via Electron environment variables.

🎖@cveNotify

🚨 CVE-2022-50096
In the Linux kernel, the following vulnerability has been resolved:

x86/kprobes: Update kcb status flag after singlestepping

Fix kprobes to update kcb (kprobes control block) status flag to
KPROBE_HIT_SSDONE even if the kp->post_handler is not set.

This bug may cause a kernel panic if another INT3 user runs right
after kprobes because kprobe_int3_handler() misunderstands the
INT3 is kprobe's single stepping INT3.

🎖@cveNotify

🚨 CVE-2022-50097
In the Linux kernel, the following vulnerability has been resolved:

video: fbdev: s3fb: Check the size of screen before memset_io()

In the function s3fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:

[ 54.083733] BUG: unable to handle page fault for address: ffffc90003000000
[ 54.083742] #PF: supervisor write access in kernel mode
[ 54.083744] #PF: error_code(0x0002) - not-present page
[ 54.083760] RIP: 0010:memset_orig+0x33/0xb0
[ 54.083782] Call Trace:
[ 54.083788] s3fb_set_par+0x1ec6/0x4040
[ 54.083806] fb_set_var+0x604/0xeb0
[ 54.083836] do_fb_ioctl+0x234/0x670

Fix the this by checking the value of 'screen_size' before memset_io().

🎖@cveNotify

🚨 CVE-2022-50098
In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: Fix crash due to stale SRB access around I/O timeouts

Ensure SRB is returned during I/O timeout error escalation. If that is not
possible fail the escalation path.

Following crash stack was seen:

BUG: unable to handle kernel paging request at 0000002f56aa90f8
IP: qla_chk_edif_rx_sa_delete_pending+0x14/0x30 [qla2xxx]
Call Trace:
? qla2x00_status_entry+0x19f/0x1c50 [qla2xxx]
? qla2x00_start_sp+0x116/0x1170 [qla2xxx]
? dma_pool_alloc+0x1d6/0x210
? mempool_alloc+0x54/0x130
? qla24xx_process_response_queue+0x548/0x12b0 [qla2xxx]
? qla_do_work+0x2d/0x40 [qla2xxx]
? process_one_work+0x14c/0x390

🎖@cveNotify

🚨 CVE-2022-50099
In the Linux kernel, the following vulnerability has been resolved:

video: fbdev: arkfb: Check the size of screen before memset_io()

In the function arkfb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:

[ 659.399066] BUG: unable to handle page fault for address: ffffc90003000000
[ 659.399077] #PF: supervisor write access in kernel mode
[ 659.399079] #PF: error_code(0x0002) - not-present page
[ 659.399094] RIP: 0010:memset_orig+0x33/0xb0
[ 659.399116] Call Trace:
[ 659.399122] arkfb_set_par+0x143f/0x24c0
[ 659.399130] fb_set_var+0x604/0xeb0
[ 659.399161] do_fb_ioctl+0x234/0x670
[ 659.399189] fb_ioctl+0xdd/0x130

Fix the this by checking the value of 'screen_size' before memset_io().

🎖@cveNotify

🚨 CVE-2025-63258
A remote command execution (RCE) vulnerability was discovered in all H3C ERG3/ERG5 series routers and XiaoBei series routers, cloud gateways, and wireless access points (versions R0162P07, UAP700-WPT330-E2265, UAP672-WPT330-R2262, UAP662E-WPT330-R2262P03, WAP611-WPT330-R1348-OASIS, WAP662-WPT330-R2262, WAP662H-WPT330-R2262, USG300V2-WPT330-R2129, MSG300-WPT330-R1350, and MSG326-WPT330-R2129). Attackers are able to exploit this vulnerability via injecting crafted commands into the sessionid parameter.

🎖@cveNotify

🚨 CVE-2025-64076
Multiple vulnerabilities exist in cbor2 through version 5.7.0 in the decode_definite_long_string() function of the C extension decoder (source/decoder.c): (1) Integer Underflow Leading to Out-of-Bounds Read (CWE-191, CWE-125): An incorrect variable reference and missing state reset in the chunk processing loop causes buffer_length to not be reset to zero after UTF-8 character consumption. This results in subsequent chunk_length calculations producing negative values (e.g., chunk_length = 65536 - buffer_length), which are passed as signed integers to the read() method, potentially triggering unlimited read operations and resource exhaustion. (2) Memory Leak via Missing Reference Count Release (CWE-401): The main processing loop fails to release Python object references (Py_DECREF) for chunk objects allocated in each iteration. For CBOR strings longer than 65536 bytes, this causes cumulative memory leaks proportional to the payload size, enabling memory exhaustion attacks through repeated processing of large CBOR payloads. Both vulnerabilities can be exploited remotely without authentication by sending specially-crafted CBOR data containing definite-length text strings with multi-byte UTF-8 characters positioned at 65536-byte chunk boundaries. Successful exploitation results in denial of service through process crashes (CBORDecodeEOF exceptions) or memory exhaustion. The vulnerabilities affect all applications using cbor2's C extension to process untrusted CBOR data, including web APIs, IoT data collectors, and message queue processors. Fixed in commit 851473490281f82d82560b2368284ef33cf6e8f9 pushed with released version 5.7.1.

🎖@cveNotify

🚨 CVE-2025-54320
In Ascertia SigningHub through 8.6.8, there is a lack of rate limiting on the invite user function, leading to an email bombing vulnerability. An authenticated attacker can exploit this by automating invite requests.

🎖@cveNotify

🚨 CVE-2025-56499
Incorrect access control in mihomo v1.19.11 allows authenticated attackers with low-level privileges to read arbitrary files with elevated privileges via obtaining the external control key from the config file.

🎖@cveNotify

🚨 CVE-2025-63229
The Mozart FM Transmitter web management interface on version WEBMOZZI-00287, contains a reflected Cross-Site Scripting (XSS) vulnerability in the /main0.php endpoint. By injecting a malicious JavaScript payload into the ?m= query parameter, an attacker can execute arbitrary code in the victim's browser, potentially stealing sensitive information, hijacking sessions, or performing unauthorized actions.

🎖@cveNotify