🚨 CVE-2020-8655
An issue was discovered in EyesOfNetwork 5.3. The sudoers configuration is prone to a privilege escalation vulnerability, allowing the apache user to run arbitrary commands as root via a crafted NSE script for nmap 7.

🎖@cveNotify

🚨 CVE-2020-9054
Multiple ZyXEL network-attached storage (NAS) devices running firmware version 5.21 contain a pre-authentication command injection vulnerability, which may allow a remote, unauthenticated attacker to execute arbitrary code on a vulnerable device. ZyXEL NAS devices achieve authentication by using the weblogin.cgi CGI executable. This program fails to properly sanitize the username parameter that is passed to it. If the username parameter contains certain characters, it can allow command injection with the privileges of the web server that runs on the ZyXEL device. Although the web server does not run as the root user, ZyXEL devices include a setuid utility that can be leveraged to run any command with root privileges. As such, it should be assumed that exploitation of this vulnerability can lead to remote code execution with root privileges. By sending a specially-crafted HTTP POST or GET request to a vulnerable ZyXEL device, a remote, unauthenticated attacker may be able to execute arbitrary code on the device. This may happen by directly connecting to a device if it is directly exposed to an attacker. However, there are ways to trigger such crafted requests even if an attacker does not have direct connectivity to a vulnerable devices. For example, simply visiting a website can result in the compromise of any ZyXEL device that is reachable from the client system. Affected products include: NAS326 before firmware V5.21(AAZF.7)C0 NAS520 before firmware V5.21(AASZ.3)C0 NAS540 before firmware V5.21(AATB.4)C0 NAS542 before firmware V5.21(ABAG.4)C0 ZyXEL has made firmware updates available for NAS326, NAS520, NAS540, and NAS542 devices. Affected models that are end-of-support: NSA210, NSA220, NSA220+, NSA221, NSA310, NSA310S, NSA320, NSA320S, NSA325 and NSA325v2

🎖@cveNotify

🚨 CVE-2020-8816
Pi-hole Web v4.3.2 (aka AdminLTE) allows Remote Code Execution by privileged dashboard users via a crafted DHCP static lease.

🎖@cveNotify

🚨 CVE-2020-9377
D-Link DIR-610 devices allow Remote Command Execution via the cmd parameter to command.php. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

🎖@cveNotify

🚨 CVE-2021-3129
Ignition before 2.5.2, as used in Laravel and other products, allows unauthenticated remote attackers to execute arbitrary code because of insecure usage of file_get_contents() and file_put_contents(). This is exploitable on sites using debug mode with Laravel before 8.4.2.

🎖@cveNotify

🚨 CVE-2021-3156
Sudo before 1.9.5p2 contains an off-by-one error that can result in a heap-based buffer overflow, which allows privilege escalation to root via "sudoedit -s" and a command-line argument that ends with a single backslash character.

🎖@cveNotify

🚨 CVE-2021-32030
The administrator application on ASUS GT-AC2900 devices before 3.0.0.4.386.42643 and Lyra Mini before 3.0.0.4_384_46630 allows authentication bypass when processing remote input from an unauthenticated user, leading to unauthorized access to the administrator interface. This relates to handle_request in router/httpd/httpd.c and auth_check in web_hook.o. An attacker-supplied value of '\0' matches the device's default value of '\0' in some situations. Note: All versions of Lyra Mini and earlier which are unsupported (End-of-Life, EOL) are also affected by this vulnerability, Consumers can mitigate this vulnerability by disabling the remote access features from WAN.

🎖@cveNotify

🚨 CVE-2021-31755
An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setmac allows attackers to execute arbitrary code on the system via a crafted post request.

🎖@cveNotify

🚨 CVE-2021-30116
Kaseya VSA before 9.5.7 allows credential disclosure, as exploited in the wild in July 2021. By default Kaseya VSA on premise offers a download page where the clients for the installation can be downloaded. The default URL for this page is https://x.x.x.x/dl.asp When an attacker download a client for Windows and installs it, the file KaseyaD.ini is generated (C:\Program Files (x86)\Kaseya\XXXXXXXXXX\KaseyaD.ini) which contains an Agent_Guid and AgentPassword This Agent_Guid and AgentPassword can be used to log in on dl.asp (https://x.x.x.x/dl.asp?un=840997037507813&pw=113cc622839a4077a84837485ced6b93e440bf66d44057713cb2f95e503a06d9) This request authenticates the client and returns a sessionId cookie that can be used in subsequent attacks to bypass authentication. Security issues discovered --- * Unauthenticated download page leaks credentials * Credentials of agent software can be used to obtain a sessionId (cookie) that can be used for services not intended for use by agents * dl.asp accepts credentials via a GET request * Access to KaseyaD.ini gives an attacker access to sufficient information to penetrate the Kaseya installation and its clients. Impact --- Via the page /dl.asp enough information can be obtained to give an attacker a sessionId that can be used to execute further (semi-authenticated) attacks against the system.

🎖@cveNotify

🚨 CVE-2021-40870
An issue was discovered in Aviatrix Controller 6.x before 6.5-1804.1922. Unrestricted upload of a file with a dangerous type is possible, which allows an unauthenticated user to execute arbitrary code via directory traversal.

🎖@cveNotify

🚨 CVE-2021-33044
The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

🎖@cveNotify

🚨 CVE-2021-33045
The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

🎖@cveNotify

🚨 CVE-2021-36260
A command injection vulnerability in the web server of some Hikvision product. Due to the insufficient input validation, attacker can exploit the vulnerability to launch a command injection attack by sending some messages with malicious commands.

🎖@cveNotify

🚨 CVE-2021-40655
An informtion disclosure issue exists in D-LINK-DIR-605 B2 Firmware Version : 2.01MT. An attacker can obtain a user name and password by forging a post request to the / getcfg.php page

🎖@cveNotify

🚨 CVE-2021-27561
Yealink Device Management (DM) 3.6.0.20 allows command injection as root via the /sm/api/v1/firewall/zone/services URI, without authentication.

🎖@cveNotify

🚨 CVE-2021-42258
BQE BillQuick Web Suite 2018 through 2021 before 22.0.9.1 allows SQL injection for unauthenticated remote code execution, as exploited in the wild in October 2021 for ransomware installation. SQL injection can, for example, use the txtID (aka username) parameter. Successful exploitation can include the ability to execute arbitrary code as MSSQLSERVER$ via xp_cmdshell.

🎖@cveNotify

🚨 CVE-2021-42237
Sitecore XP 7.5 Initial Release to Sitecore XP 8.2 Update-7 is vulnerable to an insecure deserialization attack where it is possible to achieve remote command execution on the machine. No authentication or special configuration is required to exploit this vulnerability.

🎖@cveNotify

🚨 CVE-2021-44207
Acclaim USAHERDS through 7.4.0.1 uses hard-coded credentials.

🎖@cveNotify

🚨 CVE-2021-45382
A Remote Command Execution (RCE) vulnerability exists in all series H/W revisions D-link DIR-810L, DIR-820L/LW, DIR-826L, DIR-830L, and DIR-836L routers via the DDNS function in ncc2 binary file. Note: DIR-810L, DIR-820L, DIR-830L, DIR-826L, DIR-836L, all hardware revisions, have reached their End of Life ("EOL") /End of Service Life ("EOS") Life-Cycle and as such this issue will not be patched.

🎖@cveNotify

🚨 CVE-2025-37822
In the Linux kernel, the following vulnerability has been resolved:

riscv: uprobes: Add missing fence.i after building the XOL buffer

The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.

This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up.

🎖@cveNotify

🚨 CVE-2025-37823
In the Linux kernel, the following vulnerability has been resolved:

net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too

Similarly to the previous patch, we need to safe guard hfsc_dequeue()
too. But for this one, we don't have a reliable reproducer.

🎖@cveNotify