🚨 CVE-2025-23157
In the Linux kernel, the following vulnerability has been resolved:
media: venus: hfi_parser: add check to avoid out of bound access
There is a possibility that init_codecs is invoked multiple times during
manipulated payload from video firmware. In such case, if codecs_count
can get incremented to value more than MAX_CODEC_NUM, there can be OOB
access. Reset the count so that it always starts from beginning.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
media: venus: hfi_parser: add check to avoid out of bound access
There is a possibility that init_codecs is invoked multiple times during
manipulated payload from video firmware. In such case, if codecs_count
can get incremented to value more than MAX_CODEC_NUM, there can be OOB
access. Reset the count so that it always starts from beginning.
🎖@cveNotify
🚨 CVE-2024-50623
In Cleo Harmony before 5.8.0.21, VLTrader before 5.8.0.21, and LexiCom before 5.8.0.21, there is an unrestricted file upload and download that could lead to remote code execution.
🎖@cveNotify
In Cleo Harmony before 5.8.0.21, VLTrader before 5.8.0.21, and LexiCom before 5.8.0.21, there is an unrestricted file upload and download that could lead to remote code execution.
🎖@cveNotify
Cleo
Cleo Product Security Advisory - CVE-2024-50623
Cleo has identified an unrestricted file upload and download vulnerability (CVE-2024-50623) that could lead to remote code execution.
The vulnerability affects the following products:
Cleo Harmony...
The vulnerability affects the following products:
Cleo Harmony...
🚨 CVE-2025-23145
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix NULL pointer in can_accept_new_subflow
When testing valkey benchmark tool with MPTCP, the kernel panics in
'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL.
Call trace:
mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P)
subflow_syn_recv_sock (./net/mptcp/subflow.c:854)
tcp_check_req (./net/ipv4/tcp_minisocks.c:863)
tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268)
ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207)
ip_local_deliver_finish (./net/ipv4/ip_input.c:234)
ip_local_deliver (./net/ipv4/ip_input.c:254)
ip_rcv_finish (./net/ipv4/ip_input.c:449)
...
According to the debug log, the same req received two SYN-ACK in a very
short time, very likely because the client retransmits the syn ack due
to multiple reasons.
Even if the packets are transmitted with a relevant time interval, they
can be processed by the server on different CPUs concurrently). The
'subflow_req->msk' ownership is transferred to the subflow the first,
and there will be a risk of a null pointer dereference here.
This patch fixes this issue by moving the 'subflow_req->msk' under the
`own_req == true` conditional.
Note that the !msk check in subflow_hmac_valid() can be dropped, because
the same check already exists under the own_req mpj branch where the
code has been moved to.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix NULL pointer in can_accept_new_subflow
When testing valkey benchmark tool with MPTCP, the kernel panics in
'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL.
Call trace:
mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P)
subflow_syn_recv_sock (./net/mptcp/subflow.c:854)
tcp_check_req (./net/ipv4/tcp_minisocks.c:863)
tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268)
ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207)
ip_local_deliver_finish (./net/ipv4/ip_input.c:234)
ip_local_deliver (./net/ipv4/ip_input.c:254)
ip_rcv_finish (./net/ipv4/ip_input.c:449)
...
According to the debug log, the same req received two SYN-ACK in a very
short time, very likely because the client retransmits the syn ack due
to multiple reasons.
Even if the packets are transmitted with a relevant time interval, they
can be processed by the server on different CPUs concurrently). The
'subflow_req->msk' ownership is transferred to the subflow the first,
and there will be a risk of a null pointer dereference here.
This patch fixes this issue by moving the 'subflow_req->msk' under the
`own_req == true` conditional.
Note that the !msk check in subflow_hmac_valid() can be dropped, because
the same check already exists under the own_req mpj branch where the
code has been moved to.
🎖@cveNotify
🚨 CVE-2025-23146
In the Linux kernel, the following vulnerability has been resolved:
mfd: ene-kb3930: Fix a potential NULL pointer dereference
The off_gpios could be NULL. Add missing check in the kb3930_probe().
This is similar to the issue fixed in commit b1ba8bcb2d1f
("backlight: hx8357: Fix potential NULL pointer dereference").
This was detected by our static analysis tool.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
mfd: ene-kb3930: Fix a potential NULL pointer dereference
The off_gpios could be NULL. Add missing check in the kb3930_probe().
This is similar to the issue fixed in commit b1ba8bcb2d1f
("backlight: hx8357: Fix potential NULL pointer dereference").
This was detected by our static analysis tool.
🎖@cveNotify
🚨 CVE-2025-23147
In the Linux kernel, the following vulnerability has been resolved:
i3c: Add NULL pointer check in i3c_master_queue_ibi()
The I3C master driver may receive an IBI from a target device that has not
been probed yet. In such cases, the master calls `i3c_master_queue_ibi()`
to queue an IBI work task, leading to "Unable to handle kernel read from
unreadable memory" and resulting in a kernel panic.
Typical IBI handling flow:
1. The I3C master scans target devices and probes their respective drivers.
2. The target device driver calls `i3c_device_request_ibi()` to enable IBI
and assigns `dev->ibi = ibi`.
3. The I3C master receives an IBI from the target device and calls
`i3c_master_queue_ibi()` to queue the target device driver’s IBI
handler task.
However, since target device events are asynchronous to the I3C probe
sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`,
leading to a kernel panic.
Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing
an uninitialized `dev->ibi`, ensuring stability.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
i3c: Add NULL pointer check in i3c_master_queue_ibi()
The I3C master driver may receive an IBI from a target device that has not
been probed yet. In such cases, the master calls `i3c_master_queue_ibi()`
to queue an IBI work task, leading to "Unable to handle kernel read from
unreadable memory" and resulting in a kernel panic.
Typical IBI handling flow:
1. The I3C master scans target devices and probes their respective drivers.
2. The target device driver calls `i3c_device_request_ibi()` to enable IBI
and assigns `dev->ibi = ibi`.
3. The I3C master receives an IBI from the target device and calls
`i3c_master_queue_ibi()` to queue the target device driver’s IBI
handler task.
However, since target device events are asynchronous to the I3C probe
sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`,
leading to a kernel panic.
Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing
an uninitialized `dev->ibi`, ensuring stability.
🎖@cveNotify
🚨 CVE-2025-23148
In the Linux kernel, the following vulnerability has been resolved:
soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe()
soc_dev_attr->revision could be NULL, thus,
a pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool.
🎖@cveNotify
In the Linux kernel, the following vulnerability has been resolved:
soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe()
soc_dev_attr->revision could be NULL, thus,
a pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool.
🎖@cveNotify
🔥1
🚨 CVE-2025-27041
Transient DOS while processing video packets received from video firmware.
🎖@cveNotify
Transient DOS while processing video packets received from video firmware.
🎖@cveNotify
🚨 CVE-2025-27045
Information disclosure while processing batch command execution in Video driver.
🎖@cveNotify
Information disclosure while processing batch command execution in Video driver.
🎖@cveNotify
🚨 CVE-2025-27053
Memory corruption during PlayReady APP usecase while processing TA commands.
🎖@cveNotify
Memory corruption during PlayReady APP usecase while processing TA commands.
🎖@cveNotify
🚨 CVE-2025-27054
Memory corruption while processing a malformed license file during reboot.
🎖@cveNotify
Memory corruption while processing a malformed license file during reboot.
🎖@cveNotify
🚨 CVE-2017-1000486
Primetek Primefaces 5.x is vulnerable to a weak encryption flaw resulting in remote code execution
🎖@cveNotify
Primetek Primefaces 5.x is vulnerable to a weak encryption flaw resulting in remote code execution
🎖@cveNotify
Mindedsecurity
RCE in Oracle NetBeans Opensource Plugins: PrimeFaces 5.x Expression Language Injection
PrimeFaces is a open source User Interface (UI) component library for JavaServer Faces (JSF) based applications, since its release, Prime...
🚨 CVE-2017-1000353
Jenkins versions 2.56 and earlier as well as 2.46.1 LTS and earlier are vulnerable to an unauthenticated remote code execution. An unauthenticated remote code execution vulnerability allowed attackers to transfer a serialized Java `SignedObject` object to the Jenkins CLI, that would be deserialized using a new `ObjectInputStream`, bypassing the existing blacklist-based protection mechanism. We're fixing this issue by adding `SignedObject` to the blacklist. We're also backporting the new HTTP CLI protocol from Jenkins 2.54 to LTS 2.46.2, and deprecating the remoting-based (i.e. Java serialization) CLI protocol, disabling it by default.
🎖@cveNotify
Jenkins versions 2.56 and earlier as well as 2.46.1 LTS and earlier are vulnerable to an unauthenticated remote code execution. An unauthenticated remote code execution vulnerability allowed attackers to transfer a serialized Java `SignedObject` object to the Jenkins CLI, that would be deserialized using a new `ObjectInputStream`, bypassing the existing blacklist-based protection mechanism. We're fixing this issue by adding `SignedObject` to the blacklist. We're also backporting the new HTTP CLI protocol from Jenkins 2.54 to LTS 2.46.2, and deprecating the remoting-based (i.e. Java serialization) CLI protocol, disabling it by default.
🎖@cveNotify
packetstorm.news
Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories, and Whitepapers
🚨 CVE-2018-10561
An issue was discovered on Dasan GPON home routers. It is possible to bypass authentication simply by appending "?images" to any URL of the device that requires authentication, as demonstrated by the /menu.html?images/ or /GponForm/diag_FORM?images/ URI. One can then manage the device.
🎖@cveNotify
An issue was discovered on Dasan GPON home routers. It is possible to bypass authentication simply by appending "?images" to any URL of the device that requires authentication, as demonstrated by the /menu.html?images/ or /GponForm/diag_FORM?images/ URI. One can then manage the device.
🎖@cveNotify
🚨 CVE-2018-10562
An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.
🎖@cveNotify
An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.
🎖@cveNotify
🚨 CVE-2018-11138
The '/common/download_agent_installer.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by anonymous users and can be abused to execute arbitrary commands on the system.
🎖@cveNotify
The '/common/download_agent_installer.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by anonymous users and can be abused to execute arbitrary commands on the system.
🎖@cveNotify
Coresecurity
| Core Security
1. Advisory Information Title: Quest KACE System Management Appliance Multiple Vulnerabilities Advisory ID: CORE-2018-0004 Advisory URL: https://www.coresecurity.com/core-labs/advisories/quest-kace-system-management-appliance-multiple-vulnerabilities Date…
🚨 CVE-2018-1000861
A code execution vulnerability exists in the Stapler web framework used by Jenkins 2.153 and earlier, LTS 2.138.3 and earlier in stapler/core/src/main/java/org/kohsuke/stapler/MetaClass.java that allows attackers to invoke some methods on Java objects by accessing crafted URLs that were not intended to be invoked this way.
🎖@cveNotify
A code execution vulnerability exists in the Stapler web framework used by Jenkins 2.153 and earlier, LTS 2.138.3 and earlier in stapler/core/src/main/java/org/kohsuke/stapler/MetaClass.java that allows attackers to invoke some methods on Java objects by accessing crafted URLs that were not intended to be invoked this way.
🎖@cveNotify
packetstorm.news
Packet Storm
Information Security Services, News, Files, Tools, Exploits, Advisories, and Whitepapers
🚨 CVE-2025-25181
A SQL injection vulnerability in timeoutWarning.asp in Advantive VeraCore through 2025.1.0 allows remote attackers to execute arbitrary SQL commands via the PmSess1 parameter.
🎖@cveNotify
A SQL injection vulnerability in timeoutWarning.asp in Advantive VeraCore through 2025.1.0 allows remote attackers to execute arbitrary SQL commands via the PmSess1 parameter.
🎖@cveNotify
🚨 CVE-2024-54085
AMI’s SPx contains
a vulnerability in the BMC where an Attacker may bypass authentication remotely through the Redfish Host Interface. A successful exploitation
of this vulnerability may lead to a loss of confidentiality, integrity, and/or
availability.
🎖@cveNotify
AMI’s SPx contains
a vulnerability in the BMC where an Attacker may bypass authentication remotely through the Redfish Host Interface. A successful exploitation
of this vulnerability may lead to a loss of confidentiality, integrity, and/or
availability.
🎖@cveNotify
🚨 CVE-2025-30066
tj-actions changed-files before 46 allows remote attackers to discover secrets by reading actions logs. (The tags v1 through v45.0.7 were affected on 2025-03-14 and 2025-03-15 because they were modified by a threat actor to point at commit 0e58ed8, which contained malicious updateFeatures code.)
🎖@cveNotify
tj-actions changed-files before 46 allows remote attackers to discover secrets by reading actions logs. (The tags v1 through v45.0.7 were affected on 2025-03-14 and 2025-03-15 because they were modified by a threat actor to point at commit 0e58ed8, which contained malicious updateFeatures code.)
🎖@cveNotify
GitGuardian Blog - Take Control of Your Secrets Security
Compromised tj-actions/changed-files GitHub Action: A look at publicly leaked secrets
On March 14, 2025, the popular GitHub action tj-actions/changed-files was compromised, exposing secrets in CI logs. GitGuardian's analysis identified leaked secrets like GitHub tokens, AWS keys, and more.